Skip to contentSkip to conversation

dt-bindings: display: panel: Convert feiyang,fy07024di26a30d to DT schema

PATCH In review Jagan Teki 2 participants 4 messages Apr 3, 2020 – Apr 7, 2020

Subsystems (6)
lore
Share & tools
lore

Jagan Teki

author maintainer
#0 lore raw

PATCH v3 1/3 dt-bindings: display: panel: Convert feiyang,fy07024di26a30d to DT schema

Convert the feiyang,fy07024di26a30d panel bindings to DT schema.

---
Changes for v3:
- update the licence, used (GPL-2.0-only OR BSD-2-Clause) since I'm the author for old binding
- use panel-common.yaml
- mark true for common properties
- use maxItems: 1 for reg
- update example
Changes for v2:
- fix dt_binding_check

 .../display/panel/feiyang,fy07024di26a30d.txt | 20 -------
 .../panel/feiyang,fy07024di26a30d.yaml        | 58 +++++++++++++++++++
 2 files changed, 58 insertions(+), 20 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
 create mode 100644 Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt deleted +0 -20
deleted file mode 100644
index 82caa7b65ae8..000000000000
@@ -1,20 +0,0 @@
-Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel
-
-Required properties:
-- compatible: must be "feiyang,fy07024di26a30d"
-- reg: DSI virtual channel used by that screen
-- avdd-supply: analog regulator dc1 switch
-- dvdd-supply: 3v3 digital regulator
-- reset-gpios: a GPIO phandle for the reset pin
-
-Optional properties:
-- backlight: phandle for the backlight control.
-
-panel@0 {
-	compatible = "feiyang,fy07024di26a30d";
-	reg = <0>;
-	avdd-supply = <&reg_dc1sw>;
-	dvdd-supply = <&reg_dldo2>;
-	reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
-	backlight = <&backlight>;
-};
Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml new file +58 -0

58 lines not on this page · raw message

Signature · 6 lines
2.17.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#1 lore raw

PATCH v3 2/3 dt-bindings: display: panel: Convert sitronix,st7701 to DT schema

Convert the sitronix,st7701 panel bindings to DT schema.

---
Changes for v3:
- update the licence, used (GPL-2.0-only OR BSD-2-Clause) since I'm the author for old binding
- use panel-common.yaml
- mark true for common properties
- use maxItems: 1 for reg
- update example
Changes for v2:
- fix dt_binding_check

 .../display/panel/sitronix,st7701.txt         | 30 --------
 .../display/panel/sitronix,st7701.yaml        | 69 +++++++++++++++++++
 2 files changed, 69 insertions(+), 30 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt
 create mode 100644 Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt deleted +0 -30
deleted file mode 100644
index ccd17597f1f6..000000000000
@@ -1,30 +0,0 @@
-Sitronix ST7701 based LCD panels
-
-ST7701 designed for small and medium sizes of TFT LCD display, is
-capable of supporting up to 480RGBX864 in resolution. It provides
-several system interfaces like MIPI/RGB/SPI.
-
-Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has
-inbuilt ST7701 chip.
-
-Required properties:
-- compatible: must be "sitronix,st7701" and one of
-  * "techstar,ts8550b"
-- reset-gpios: a GPIO phandle for the reset pin
-
-Required properties for techstar,ts8550b:
-- reg: DSI virtual channel used by that screen
-- VCC-supply: analog regulator for MIPI circuit
-- IOVCC-supply: I/O system regulator
-
-Optional properties:
-- backlight: phandle for the backlight control.
-
-panel@0 {
-	compatible = "techstar,ts8550b", "sitronix,st7701";
-	reg = <0>;
-	VCC-supply = <&reg_dldo2>;
-	IOVCC-supply = <&reg_dldo2>;
-	reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
-	backlight = <&backlight>;
-};
Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml new file +69 -0

69 lines not on this page · raw message

Signature · 6 lines
2.17.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#2 lore raw

PATCH v3 3/3 MAINTAINERS: Update feiyang, st7701 panel bindings converted as YAML

In reply to Jagan Teki

The feiyang,fy07024di26a30d.txt and sitronix,st7701.txt has been converted to YAML schemas, update MAINTAINERS to match them again.

---
Changes for v3:
- none

 MAINTAINERS | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
MAINTAINERS +2 -2
index 6ba8b584bf95..b987f2588e6a 100644
@@ -5273,7 +5273,7 @@ DRM DRIVER FOR FEIYANG FY07024DI26A30-D MIPI-DSI LCD PANELS
 M:	Jagan Teki <[email protected]>
 S:	Maintained
 F:	drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
-F:	Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
+F:	Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
 
 DRM DRIVER FOR GRAIN MEDIA GM12U320 PROJECTORS
 M:	Hans de Goede <[email protected]>
@@ -5416,7 +5416,7 @@ DRM DRIVER FOR SITRONIX ST7701 PANELS
 M:	Jagan Teki <[email protected]>
 S:	Maintained
 F:	drivers/gpu/drm/panel/panel-sitronix-st7701.c
-F:	Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt
+F:	Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
 
 DRM DRIVER FOR SITRONIX ST7586 PANELS
 M:	David Lechner <[email protected]>
Signature · 6 lines
2.17.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#3 lore raw

Re: [PATCH v3 1/3] dt-bindings: display: panel: Convert feiyang, fy07024di26a30d to DT schema

In reply to Jagan Teki

Hi Jagan.

Quoted 3 lines · Jagan Teki

Convert the feiyang,fy07024di26a30d panel bindings to DT schema.

Thanks, this and the two other patches are now pushed to drm-misc-next.

Sam

Quoted 114 lines

---
Changes for v3:
- update the licence, used (GPL-2.0-only OR BSD-2-Clause) since I'm the author for old binding
- use panel-common.yaml
- mark true for common properties
- use maxItems: 1 for reg
- update example
Changes for v2:
- fix dt_binding_check

 .../display/panel/feiyang,fy07024di26a30d.txt | 20 -------
 .../panel/feiyang,fy07024di26a30d.yaml        | 58 +++++++++++++++++++
 2 files changed, 58 insertions(+), 20 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
 create mode 100644 Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt deleted +0 -20
deleted file mode 100644
index 82caa7b65ae8..000000000000
@@ -1,20 +0,0 @@
-Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel
-
-Required properties:
-- compatible: must be "feiyang,fy07024di26a30d"
-- reg: DSI virtual channel used by that screen
-- avdd-supply: analog regulator dc1 switch
-- dvdd-supply: 3v3 digital regulator
-- reset-gpios: a GPIO phandle for the reset pin
-
-Optional properties:
-- backlight: phandle for the backlight control.
-
-panel@0 {
-	compatible = "feiyang,fy07024di26a30d";
-	reg = <0>;
-	avdd-supply = <&reg_dc1sw>;
-	dvdd-supply = <&reg_dldo2>;
-	reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
-	backlight = <&backlight>;
-};
Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml new file +58 -0
new file mode 100644
index 000000000000..95acf9e96f1c
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/feiyang,fy07024di26a30d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel
+
+maintainers:
+  - Jagan Teki <[email protected]>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: feiyang,fy07024di26a30d
+
+  reg:
+    description: DSI virtual channel used by that screen
+    maxItems: 1
+
+  avdd-supply:
+    description: analog regulator dc1 switch
+
+  dvdd-supply:
+    description: 3v3 digital regulator
+
+  reset-gpios: true
+
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "feiyang,fy07024di26a30d";
+            reg = <0>;
+            avdd-supply = <&reg_dc1sw>;
+            dvdd-supply = <&reg_dldo2>;
+            reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+            backlight = <&backlight>;
+        };
+    };
Signature · 6 lines
2.17.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel