Skip to contentSkip to conversation

i40e: Add a check to see if MFS is set

PATCH New Todd Fujinaka 1 participant 1 message Apr 7, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 i40e: Add a check to see if MFS is set

A customer was chain-booting to provision his systems and one of the steps was setting MFS. MFS isn't cleared by normal warm reboots (clearing requires a GLOBR) and there was no indication of why Jumbo Frame receives were failing.

Add a warning if MFS is set to anything lower than the default.

---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 9 +++++++++
 1 file changed, 9 insertions(+)
drivers/net/ethernet/intel/i40e/i40e_main.c +9 -0
index 2a037ec244b9..afcc7f82f103 100644
@@ -15264,6 +15264,15 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			i40e_stat_str(&pf->hw, err),
 			i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
 
+	/* make sure the MFS hasn't been set lower than the default */
+#define MAX_FRAME_SIZE_DEFAULT 0x2600
+	for (i = 0; i < 4; i++) {
+		val = ((rd32(&pf->hw, I40E_PRTGL_SAH) & I40E_PRTGL_SAH_MFS_MASK)
+			>> I40E_PRTGL_SAH_MFS_SHIFT);
+		if (val < MAX_FRAME_SIZE_DEFAULT)
+			dev_warn(&pdev->dev, "MFS for port %x has been set below the default: %x\n", i, val);
+	}
+
 	/* Add a filter to drop all Flow control frames from any VSI from being
 	 * transmitted. By doing so we stop a malicious VF from sending out
 	 * PAUSE or PFC frames and potentially controlling traffic for other
Signature · 1 line
2.26.0