driver core: Revert default driver_deferred_probe_timeout value to 0
Subsystems (3)
RFC PATCH v2 1/2 driver core: Revert default driver_deferred_probe_timeout value to 0
In commit c8c43cee29f6 ("driver core: Fix driver_deferred_probe_check_state() logic"), we both cleaned up the logic and also set the default driver_deferred_probe_timeout value to 30 seconds to allow for drivers that are missing dependencies to have some time so that the dependency may be loaded from userland after initcalls_done is set.
However, Yoshihiro Shimoda reported that on his device that expects to have unmet dependencies (due to "optional links" in its devicetree), was failing to mount the NFS root.
In digging further, it seemed the problem was that while the device properly probes after waiting 30 seconds for any missing modules to load, the ip_auto_config() had already failed, resulting in NFS to fail. This was due to ip_auto_config() calling wait_for_device_probe() which doesn't wait for the driver_deferred_probe_timeout to fire.
Fixing that issue is possible, but could also introduce 30 second delays in bootups for users who don't have any missing dependencies, which is not ideal.
So I think the best solution to avoid any regressions is to revert back to a default timeout value of zero, and allow systems that need to utilize the timeout in order for userland to load any modules that supply misisng dependencies in the dts to specify the timeout length via the exiting documented boot argument.
Thanks to Geert for chasing down that ip_auto_config was why NFS was failing in this case!
--- drivers/base/dd.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-)
drivers/base/dd.c +2 -11
@@ -224,16 +224,7 @@ static int deferred_devs_show(struct seq_file *s, void *data) }DEFINE_SHOW_ATTRIBUTE (deferred_devs); -#ifdef CONFIG_MODULES -/* -* In the case of modules, set the default probe timeout to -* 30 seconds to give userland some time to load needed modules -*/ -int driver_deferred_probe_timeout =30 ; -#else -/* In the case of !modules, no probe timeout needed */ -int driver_deferred_probe_timeout =-1 ; -#endif +int driver_deferred_probe_timeout;EXPORT_SYMBOL_GPL (driver_deferred_probe_timeout);static int __init deferred_probe_timeout_setup (char *str)
@@ -266,7 +257,7 @@ int driver_deferred_probe_check_state(struct device *dev)return -ENODEV ; } -if (!driver_deferred_probe_timeout) { +if (!driver_deferred_probe_timeout && initcalls_done) {dev_WARN (dev,"deferred probe timeout, ignoring dependency" );return -ETIMEDOUT ; }
Signature · 1 line
2.17.1
RFC PATCH v2 2/2 driver core: Ensure wait_for_device_probe() waits until the deferred_probe_timeout fires
In commit c8c43cee29f6 ("driver core: Fix driver_deferred_probe_check_state() logic"), we set the default driver_deferred_probe_timeout value to 30 seconds to allow for drivers that are missing dependencies to have some time so that the dependency may be loaded from userland after initcalls_done is set.
However, Yoshihiro Shimoda reported that on his device that expects to have unmet dependencies (due to "optional links" in its devicetree), was failing to mount the NFS root.
In digging further, it seemed the problem was that while the device properly probes after waiting 30 seconds for any missing modules to load, the ip_auto_config() had already failed, resulting in NFS to fail. This was due to ip_auto_config() calling wait_for_device_probe() which doesn't wait for the driver_deferred_probe_timeout to fire.
This patch tries to fix the issue by creating a waitqueue for the driver_deferred_probe_timeout, and calling wait_event() to make sure driver_deferred_probe_timeout is zero in wait_for_device_probe() to make sure all the probing is finished.
The downside to this solution is that kernel functionality that uses wait_for_device_probe(), will block until the driver_deferred_probe_timeout fires, regardless of if there is any missing dependencies.
However, the previous patch reverts the default timeout value to zero, so this side-effect will only affect users who specify a driver_deferred_probe_timeout= value as a boot argument, where the additional delay would be beneficial to allow modules to load later during boot.
Thanks to Geert for chasing down that ip_auto_config was why NFS was failing in this case!
---
* v2: Split patch, and apply it as a follow-on to setting the driver_deferred_probe_timeout defalt back to zero
--- drivers/base/dd.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/base/dd.c +5 -0
@@ -226,6 +226,7 @@ DEFINE_SHOW_ATTRIBUTE(deferred_devs);int driver_deferred_probe_timeout;EXPORT_SYMBOL_GPL (driver_deferred_probe_timeout); +static DECLARE_WAIT_QUEUE_HEAD (probe_timeout_waitqueue);static int __init deferred_probe_timeout_setup (char *str) {
@@ -275,6 +276,7 @@ static void deferred_probe_timeout_work_func(struct work_struct *work)list_for_each_entry_safe (private, p, &deferred_probe_pending_list, deferred_probe)dev_info (private->device,"deferred probe pending" ); +wake_up (&probe_timeout_waitqueue); } static DECLARE_DELAYED_WORK(deferred_probe_timeout_work, deferred_probe_timeout_work_func);
@@ -649,6 +651,9 @@ int driver_probe_done(void)*/ void wait_for_device_probe (void ) { +/* wait for probe timeout */ +wait_event (probe_timeout_waitqueue, !driver_deferred_probe_timeout); +/* wait for the deferred probe workqueue to finish */ flush_work (&deferred_probe_work);
Signature · 1 line
2.17.1
RE: [RFC][PATCH v2 2/2] driver core: Ensure wait_for_device_probe() waits until the deferred_probe_timeout fires
Hi John,
Quoted 54 lines
From: John Stultz, Sent: Wednesday, April 8, 2020 4:27 PM
In commit
c8c43cee29f6("driver core: Fixdriver_deferred_probe_check_state()logic"), we set the defaultdriver_deferred_probe_timeoutvalue to 30 seconds to allow for drivers that are missing dependencies to have some time so that the dependency may be loaded from userland afterinitcalls_doneis set.However, Yoshihiro Shimoda reported that on his device that expects to have unmet dependencies (due to "optional links" in its devicetree), was failing to mount the NFS root.
In digging further, it seemed the problem was that while the device properly probes after waiting 30 seconds for any missing modules to load, the
ip_auto_config()had already failed, resulting in NFS to fail. This was due toip_auto_config()callingwait_for_device_probe()which doesn't wait for thedriver_deferred_probe_timeoutto fire.This patch tries to fix the issue by creating a waitqueue for the
driver_deferred_probe_timeout, and callingwait_event()to make suredriver_deferred_probe_timeoutis zero inwait_for_device_probe()to make sure all the probing is finished.The downside to this solution is that kernel functionality that uses
wait_for_device_probe(), will block until thedriver_deferred_probe_timeoutfires, regardless of if there is any missing dependencies.However, the previous patch reverts the default timeout value to zero, so this side-effect will only affect users who specify a driver_deferred_probe_timeout= value as a boot argument, where the additional delay would be beneficial to allow modules to load later during boot.
Thanks to Geert for chasing down that
ip_auto_configwas why NFS was failing in this case!Cc "David S. Miller" <[email protected]>Cc Alexey Kuznetsov <[email protected]>Cc Hideaki YOSHIFUJI <[email protected]>Cc Jakub Kicinski <[email protected]>Cc Greg Kroah-Hartman <[email protected]>Cc Rafael J. Wysocki <[email protected]>Cc Rob Herring <[email protected]>Cc Geert Uytterhoeven <[email protected]>Cc Yoshihiro Shimoda <[email protected]>Cc netdev <[email protected]>Reported-by Yoshihiro Shimoda <[email protected]>Fixes c8c43cee29f6 ("driver core: Fix driver_deferred_probe_check_state() logic")Signed-off-by John Stultz <[email protected]>
Quoted 4 lines
---
* v2: Split patch, and apply it as a follow-on to setting thedriver_deferred_probe_timeoutdefalt back to zero
---
Thank you for the patch! This patch doesn't cause any side effect on my environment (the value of driver_deferred_probe_timeout is 0). So,
Best regards,
Yoshihiro Shimoda
Hi John,
Quoted 34 lines
From: John Stultz, Sent: Wednesday, April 8, 2020 4:27 PM
In commit
c8c43cee29f6("driver core: Fixdriver_deferred_probe_check_state()logic"), we both cleaned up the logic and also set the defaultdriver_deferred_probe_timeoutvalue to 30 seconds to allow for drivers that are missing dependencies to have some time so that the dependency may be loaded from userland afterinitcalls_doneis set.However, Yoshihiro Shimoda reported that on his device that expects to have unmet dependencies (due to "optional links" in its devicetree), was failing to mount the NFS root.
In digging further, it seemed the problem was that while the device properly probes after waiting 30 seconds for any missing modules to load, the
ip_auto_config()had already failed, resulting in NFS to fail. This was due toip_auto_config()callingwait_for_device_probe()which doesn't wait for thedriver_deferred_probe_timeoutto fire.Fixing that issue is possible, but could also introduce 30 second delays in bootups for users who don't have any missing dependencies, which is not ideal.
So I think the best solution to avoid any regressions is to revert back to a default timeout value of zero, and allow systems that need to utilize the timeout in order for userland to load any modules that supply misisng dependencies in the dts to specify the timeout length via the exiting documented boot argument.
Thanks to Geert for chasing down that
ip_auto_configwas why NFS was failing in this case!
Quoted 14 lines
Cc "David S. Miller" <[email protected]>Cc Alexey Kuznetsov <[email protected]>Cc Hideaki YOSHIFUJI <[email protected]>Cc Jakub Kicinski <[email protected]>Cc Greg Kroah-Hartman <[email protected]>Cc Rafael J. Wysocki <[email protected]>Cc Rob Herring <[email protected]>Cc Geert Uytterhoeven <[email protected]>Cc Yoshihiro Shimoda <[email protected]>Cc netdev <[email protected]>Reported-by Yoshihiro Shimoda <[email protected]>Fixes c8c43cee29f6 ("driver core: Fix driver_deferred_probe_check_state() logic")Signed-off-by John Stultz <[email protected]>
Thank you for the patch! This patch could fix the issue on my environment. So,
Best regards,
Yoshihiro Shimoda
Quoted 32 lines · John Stultz
In commit
c8c43cee29f6("driver core: Fixdriver_deferred_probe_check_state()logic"), we both cleaned up the logic and also set the defaultdriver_deferred_probe_timeoutvalue to 30 seconds to allow for drivers that are missing dependencies to have some time so that the dependency may be loaded from userland afterinitcalls_doneis set.However, Yoshihiro Shimoda reported that on his device that expects to have unmet dependencies (due to "optional links" in its devicetree), was failing to mount the NFS root.
In digging further, it seemed the problem was that while the device properly probes after waiting 30 seconds for any missing modules to load, the
ip_auto_config()had already failed, resulting in NFS to fail. This was due toip_auto_config()callingwait_for_device_probe()which doesn't wait for thedriver_deferred_probe_timeoutto fire.Fixing that issue is possible, but could also introduce 30 second delays in bootups for users who don't have any missing dependencies, which is not ideal.
So I think the best solution to avoid any regressions is to revert back to a default timeout value of zero, and allow systems that need to utilize the timeout in order for userland to load any modules that supply misisng dependencies in the dts to specify the timeout length via the exiting documented boot argument.
Thanks to Geert for chasing down that
ip_auto_configwas why NFS was failing in this case!
Quoted 14 lines
Cc "David S. Miller" <[email protected]>Cc Alexey Kuznetsov <[email protected]>Cc Hideaki YOSHIFUJI <[email protected]>Cc Jakub Kicinski <[email protected]>Cc Greg Kroah-Hartman <[email protected]>Cc Rafael J. Wysocki <[email protected]>Cc Rob Herring <[email protected]>Cc Geert Uytterhoeven <[email protected]>Cc Yoshihiro Shimoda <[email protected]>Cc netdev <[email protected]>Reported-by Yoshihiro Shimoda <[email protected]>Fixes c8c43cee29f6 ("driver core: Fix driver_deferred_probe_check_state() logic")Signed-off-by John Stultz <[email protected]>
Works fine with all four combinations (CONFIG_IPMMU_VMSA=y/n and CONFIG_MODULES=y/n) on Renesas Salvator-X(S) with R-Car Gen3.
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds