Skip to contentSkip to conversation

More K210 Support

PATCH In review Palmer Dabbelt 2 participants 11 messages Apr 8, 2020 – Apr 24, 2020

Subsystems (2)
lore
Share & tools
lore

Palmer Dabbelt

author maintainer
#0 lore raw

* Builds a table of device trees, keyed by mvendorid/marchid/mimpid. This allows multiple device trees to be built into the kernel. I don't really like maintaining the two lists (one in C and one in assembly) or having that function in the table, but it's the best I could come up with.
* "handles" PMP traps by just skipping the PMP setup phase.

I don't actually have a K210 so I can't test any of this. I also couldn't find the K210 identifiers listed anywhere online, so someone will have to dig them out of the board.

I also didn't spend any time thinking through how we free these device trees, but given that .dtb.init.rodata already exists as a section I'm just guessing that's were we're supposed to put them.

author maintainer
#1 lore raw

PATCH 1/3 RISC-V: Allow device trees to be built into the kernel

From: Palmer Dabbelt <[email protected]>

Some systems don't provide a useful device tree to the kernel on boot. Chasing around bootloaders for these systems is a headache, so instead le't's just keep device tree table in the kernel, keyed by the SOC's unique identifier, that contains the relevant DTB.

This is only implemented for M mode right now. While we could implement this via the SBI calls that allow access to these identifiers, we don't have any systems that need this right now.

---
 arch/riscv/Kconfig                    |  5 +++++
 arch/riscv/include/asm/soc.h          | 27 +++++++++++++++++++++++++++
 arch/riscv/kernel/Makefile            |  3 +++
 arch/riscv/kernel/builtin-dtb-table.c |  6 ++++++
 arch/riscv/kernel/builtin-dtb.S       |  3 +++
 arch/riscv/kernel/soc.c               | 25 +++++++++++++++++++++++++
 arch/riscv/kernel/vmlinux.lds.S       |  5 +++++
 arch/riscv/mm/init.c                  | 14 ++++++++++++++
 8 files changed, 88 insertions(+)
 create mode 100644 arch/riscv/kernel/builtin-dtb-table.c
 create mode 100644 arch/riscv/kernel/builtin-dtb.S
arch/riscv/Kconfig +5 -0
index bc713666f00a..7572afc43bd8 100644
@@ -380,6 +380,11 @@ endchoice
 
 endmenu
 
+config BUILTIN_DTB
+	def_bool y
+	depends on RISCV_M_MODE
+	depends on OF
+
 menu "Power management options"
 
 source "kernel/power/Kconfig"
arch/riscv/include/asm/soc.h +27 -0
index 18bd1253ea18..c232e57bb356 100644
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ * Copyright (C) 2020 Google, Inc
  */
 
 #ifndef _ASM_RISCV_SOC_H
@@ -22,5 +23,31 @@
 
 void soc_early_init(void);
 
+/*
+ * Allows Linux to provide a device tree, which is necessary for SOCs that
+ * don't provide a useful one on their own.
+ */
+struct soc_builtin_dtb_table_entry {
+	long vendor_id;
+	long arch_id;
+	long imp_id;
+	void *(*dtb_func)(void);
+};
+
+#define SOC_BUILTIN_DTB_DECLARE(name, vendor, impl, arch, dtb)		\
+	static __init __used						\
+	void *__soc_builtin_dtb_f__##name(void) { return dtb; }		\
+									\
+	static const struct soc_builtin_dtb_table_entry			\
+	__soc_builtin_dtb__##name __used				\
+	__section(__soc_builtin_dtb_table)				\
+	= {								\
+		.vendor_id = vendor,					\
+		.arch_id   = arch,					\
+		.imp_id    = impl,					\
+		.dtb_func  = __soc_builtin_dtb_f__##name,		\
+	}
+
+void *soc_lookup_builtin_dtb(long vendor_id, long arch_id, long imp_id);
 
 #endif
arch/riscv/kernel/Makefile +3 -0
index 86c83081044f..f40516b6e6c1 100644
@@ -52,4 +52,7 @@ obj-$(CONFIG_SMP) += cpu_ops_sbi.o
 endif
 obj-$(CONFIG_HOTPLUG_CPU)	+= cpu-hotplug.o
 
+obj-$(CONFIG_BUILTIN_DTB) += builtin-dtb.o
+obj-$(CONFIG_BUILTIN_DTB) += builtin-dtb-table.o
+
 clean:
arch/riscv/kernel/builtin-dtb-table.c new file +6 -0
new file mode 100644
index 000000000000..7ad6fe93b8a6
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Table of built-in device trees
+ */
+
+#include <asm/soc.h>
arch/riscv/kernel/builtin-dtb.S new file +3 -0
new file mode 100644
index 000000000000..3d459ad86948
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+.section .dtb.init.rodata,"a"
arch/riscv/kernel/soc.c +25 -0
index c32e7c8e7870..3a05110a2447 100644
@@ -32,3 +32,28 @@ void __init soc_early_init(void)
 		}
 	}
 }
+
+static int builtin_dtb_match(long vendor_id, long arch_id, long imp_id,
+			     const struct soc_builtin_dtb_table_entry *entry)
+{
+	return (entry->vendor_id == vendor_id)
+	       && (entry->arch_id == arch_id)
+	       && (entry->imp_id == imp_id);
+}
+
+extern unsigned long __soc_builtin_dtb_table_start;
+extern unsigned long __soc_builtin_dtb_table_end;
+
+void * __init soc_lookup_builtin_dtb(long vendor_id, long arch_id, long imp_id)
+{
+	const struct soc_builtin_dtb_table_entry *s;
+
+	for (s = (void *)&__soc_early_init_table_start;
+	     (void *)s < (void *)&__soc_early_init_table_end; s++) {
+		if (builtin_dtb_match(vendor_id, arch_id, imp_id, s)) {
+			return s->dtb_func();
+		}
+	}
+
+	return NULL;
+}
arch/riscv/kernel/vmlinux.lds.S +5 -0
index 0339b6bbe11a..e6f8016b366a 100644
@@ -34,6 +34,11 @@ SECTIONS
 		KEEP(*(__soc_early_init_table))
 		__soc_early_init_table_end = .;
 	}
+	__soc_builtin_dtb_table : {
+		__soc_builtin_dtb_table_start = .;
+		KEEP(*(__soc_builtin_dtb_table))
+		__soc_builtin_dtb_table_end = .;
+	}
 	/* we have to discard exit text and such at runtime, not link time */
 	.exit.text :
 	{
arch/riscv/mm/init.c +14 -0
index 0c625a5e98db..ad07d931bca8 100644
@@ -17,6 +17,7 @@
 #include <asm/fixmap.h>
 #include <asm/tlbflush.h>
 #include <asm/sections.h>
+#include <asm/soc.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
 
@@ -492,7 +493,20 @@ void free_initmem(void)
 #else
 asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 {
+#ifdef CONFIG_RISCV_M_MODE
+	void *builtin_dtb;
+	long mvendorid, marchid, mimpid;
+
+	__asm__ ("csrr %0, mvendorid" : "=r"(mvendorid));
+	__asm__ ("csrr %0, marchid" : "=r"(marchid));
+	__asm__ ("csrr %0, mimpid" : "=r"(mimpid));
+
+	builtin_dtb = soc_lookup_builtin_dtb(mvendorid, marchid, mimpid);
+	if (builtin_dtb != NULL)
+		dtb_early_va = builtin_dtb;
+#else
 	dtb_early_va = (void *)dtb_pa;
+#endif
 }
 
 static inline void setup_vm_final(void)
Signature · 1 line
2.26.0.292.g33ef6b2f38-goog
author maintainer
#2 lore raw

PATCH 2/3 RISC-V: K210: Add a built-in device tree

In reply to Palmer Dabbelt

From: Palmer Dabbelt <[email protected]>

The K210's bootloader doesn't provide a device tree, so we must provide our own.

FIXME: I don't actually know the unique IDs on the K210.

---
 arch/riscv/Kconfig.socs               | 13 ++++++++++++-
 arch/riscv/boot/dts/kendryte/Makefile |  2 +-
 arch/riscv/kernel/builtin-dtb-table.c |  5 +++++
 arch/riscv/kernel/builtin-dtb.S       |  6 ++++++
 4 files changed, 24 insertions(+), 2 deletions(-)
arch/riscv/Kconfig.socs +12 -1
index a843100124ae..49e953f45e1f 100644
@@ -37,11 +37,22 @@ config SOC_VIRT
 config SOC_KENDRYTE
 	bool "Kendryte K210 SoC"
 	depends on !MMU
-	select BUILTIN_DTB
 	select SERIAL_SIFIVE if TTY
 	select SERIAL_SIFIVE_CONSOLE if TTY
 	select SIFIVE_PLIC
+	select SOC_KENDRYTE_K210_DTB_BUILTIN
 	help
 	  This enables support for Kendryte K210 SoC platform hardware.
 
+config SOC_KENDRYTE_K210_DTB
+	def_bool y
+	depends on OF
+
+config SOC_KENDRYTE_K210_DTB_BUILTIN
+	bool "Builtin device tree for the Kendryte K210"
+	depends on BUILTIN_DTB
+	select SOC_KENDRYTE_K210_DTB
+	help
+	  Builds a device tree for the Kendryte K210 into the Linux image.
+
 endmenu
arch/riscv/boot/dts/kendryte/Makefile +1 -1
index 815444e69e89..01d7eb15673f 100644
@@ -1,2 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_KENDRYTE) += k210.dtb
+dtb-$(CONFIG_SOC_KENDRYTE_K210_DTB) += k210.dtb
arch/riscv/kernel/builtin-dtb-table.c +5 -0
index 7ad6fe93b8a6..203174ba6f22 100644
@@ -4,3 +4,8 @@
  */
 
 #include <asm/soc.h>
+
+#ifdef CONFIG_SOC_KENDRYTE_K210_DTB_BUILTIN
+extern void *kendryte_k210_dtb;
+SOC_BUILTIN_DTB_DECLARE(kendryte_k210, 0x0, 0x0, 0x0, kendryte_k210_dtb);
+#endif
arch/riscv/kernel/builtin-dtb.S +6 -0
index 3d459ad86948..b0fd5ca231d7 100644
@@ -1,3 +1,9 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 
 .section .dtb.init.rodata,"a"
+
+#ifdef CONFIG_SOC_KENDRYTE_K210_DTB_BUILTIN
+.global kendryte_k210_dtb
+kendryte_k210_dtb:
+	.incbin "arch/riscv/boot/dts/kendryte/k210.dtb"
+#endif
Signature · 1 line
2.26.0.292.g33ef6b2f38-goog
#3 lore raw

Re: [PATCH 2/3] RISC-V: K210: Add a built-in device tree

Quoted 6 lines · Palmer Dabbelt

From: Palmer Dabbelt <[email protected]>

The K210's bootloader doesn't provide a device tree, so we must provide our own.

FIXME: I don't actually know the unique IDs on the K210.

OK. I will test.

Quoted 14 lines
---
 arch/riscv/Kconfig.socs               | 13 ++++++++++++-
 arch/riscv/boot/dts/kendryte/Makefile |  2 +-
 arch/riscv/kernel/builtin-dtb-table.c |  5 +++++
 arch/riscv/kernel/builtin-dtb.S       |  6 ++++++
 4 files changed, 24 insertions(+), 2 deletions(-)
arch/riscv/Kconfig.socs +0 -0
index a843100124ae..49e953f45e1f 100644

arch/riscv/Kconfig.socs config SOC_VIRT · line 40

Quoted 4 lines
arch/riscv/Kconfig.socs +0 -1
@@ -37,11 +37,22 @@ config SOC_VIRT
 config SOC_KENDRYTE
 	bool "Kendryte K210 SoC"
 	depends on !MMU
-	select BUILTIN_DTB

Since SOC_KENDRYTE_K210_DTB_BUILTIN depends on BUILTIN_DTB, you need to keep this select, no ?

arch/riscv/Kconfig.socs config SOC_VIRT · line 49

Quoted 10 lines
arch/riscv/Kconfig.socs +4 -0
 	select SERIAL_SIFIVE if TTY
 	select SERIAL_SIFIVE_CONSOLE if TTY
 	select SIFIVE_PLIC
+	select SOC_KENDRYTE_K210_DTB_BUILTIN
 	help
 	  This enables support for Kendryte K210 SoC platform hardware.
 
+config SOC_KENDRYTE_K210_DTB
+	def_bool y
+	depends on OF

This one is used only in the makefile. Why not use SOC_KENDRYTE_K210_DTB_BUILTIN directly and drop this SOC_KENDRYTE_K210_DTB ?

Quoted 45 lines
arch/riscv/Kconfig.socs +8 -0
+
+config SOC_KENDRYTE_K210_DTB_BUILTIN
+	bool "Builtin device tree for the Kendryte K210"
+	depends on BUILTIN_DTB
+	select SOC_KENDRYTE_K210_DTB
+	help
+	  Builds a device tree for the Kendryte K210 into the Linux image.
+
 endmenu
arch/riscv/boot/dts/kendryte/Makefile +1 -1
index 815444e69e89..01d7eb15673f 100644
@@ -1,2 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_KENDRYTE) += k210.dtb
+dtb-$(CONFIG_SOC_KENDRYTE_K210_DTB) += k210.dtb
arch/riscv/kernel/builtin-dtb-table.c +5 -0
index 7ad6fe93b8a6..203174ba6f22 100644
@@ -4,3 +4,8 @@
  */
 
 #include <asm/soc.h>
+
+#ifdef CONFIG_SOC_KENDRYTE_K210_DTB_BUILTIN
+extern void *kendryte_k210_dtb;
+SOC_BUILTIN_DTB_DECLARE(kendryte_k210, 0x0, 0x0, 0x0, kendryte_k210_dtb);
+#endif
arch/riscv/kernel/builtin-dtb.S +6 -0
index 3d459ad86948..b0fd5ca231d7 100644
@@ -1,3 +1,9 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 
 .section .dtb.init.rodata,"a"
+
+#ifdef CONFIG_SOC_KENDRYTE_K210_DTB_BUILTIN
+.global kendryte_k210_dtb
+kendryte_k210_dtb:
+	.incbin "arch/riscv/boot/dts/kendryte/k210.dtb"
+#endif
Signature · 2 lines
Damien Le Moal
Western Digital Research
author maintainer
#4 lore raw

PATCH 3/3 RISC-V: Skip setting up PMPs on traps

In reply to Palmer Dabbelt

From: Palmer Dabbelt <[email protected]>

The RISC-V ISA manual says that PMPs are WARL, but it appears the K210 doesn't implement them and instead traps on the unsupported accesses. This patch handles those traps by just skipping the PMP initialization entirely, under the theory that machines that trap on PMP accesses must allow memory accesses as otherwise they're pretty useless.

---
 arch/riscv/kernel/head.S | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
arch/riscv/kernel/head.S +10 -1
index 98a406474e7d..7ed1b22950fd 100644
@@ -161,11 +161,20 @@ ENTRY(_start_kernel)
 	/* Reset all registers except ra, a0, a1 */
 	call reset_regs
 
-	/* Setup a PMP to permit access to all of memory. */
+	/*
+	 * Setup a PMP to permit access to all of memory.  Some machines may
+	 * not implement PMPs, so we set up a quick trap handler to just skip
+	 * touching the PMPs on any trap.
+	 */
+	la a0, pmp_done
+	csrw CSR_TVEC, a0
+
 	li a0, -1
 	csrw CSR_PMPADDR0, a0
 	li a0, (PMP_A_NAPOT | PMP_R | PMP_W | PMP_X)
 	csrw CSR_PMPCFG0, a0
+.align 2
+pmp_done:
 
 	/*
 	 * The hartid in a0 is expected later on, and we have no firmware
Signature · 1 line
2.26.0.292.g33ef6b2f38-goog
Tested-by Reviewed-by on v1 3/3
#5 lore raw

Re: [PATCH 3/3] RISC-V: Skip setting up PMPs on traps

Quoted 9 lines · Palmer Dabbelt

From: Palmer Dabbelt <[email protected]>

The RISC-V ISA manual says that PMPs are WARL, but it appears the K210 doesn't implement them and instead traps on the unsupported accesses. This patch handles those traps by just skipping the PMP initialization entirely, under the theory that machines that trap on PMP accesses must allow memory accesses as otherwise they're pretty useless.

This one works:

Testing/hacking the other 2 patches of the series now.

Quoted 31 lines
---
 arch/riscv/kernel/head.S | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
arch/riscv/kernel/head.S +10 -1
index 98a406474e7d..7ed1b22950fd 100644
@@ -161,11 +161,20 @@ ENTRY(_start_kernel)
 	/* Reset all registers except ra, a0, a1 */
 	call reset_regs
 
-	/* Setup a PMP to permit access to all of memory. */
+	/*
+	 * Setup a PMP to permit access to all of memory.  Some machines may
+	 * not implement PMPs, so we set up a quick trap handler to just skip
+	 * touching the PMPs on any trap.
+	 */
+	la a0, pmp_done
+	csrw CSR_TVEC, a0
+
 	li a0, -1
 	csrw CSR_PMPADDR0, a0
 	li a0, (PMP_A_NAPOT | PMP_R | PMP_W | PMP_X)
 	csrw CSR_PMPCFG0, a0
+.align 2
+pmp_done:
 
 	/*
 	 * The hartid in a0 is expected later on, and we have no firmware
Signature · 2 lines
Damien Le Moal
Western Digital Research
#6 lore raw
In reply to Palmer Dabbelt
Quoted 6 lines · Palmer Dabbelt

* Builds a table of device trees, keyed by mvendorid/marchid/mimpid. This allows multiple device trees to be built into the kernel. I don't really like maintaining the two lists (one in C and one in assembly) or having that function in the table, but it's the best I could come up with.
* "handles" PMP traps by just skipping the PMP setup phase.

Quoted 7 lines

I don't actually have a K210 so I can't test any of this. I also couldn't find the K210 identifiers listed anywhere online, so someone will have to dig them out of the board.

I also didn't spend any time thinking through how we free these device trees, but given that .dtb.init.rodata already exists as a section I'm just guessing that's were we're supposed to put them.

I cannot test anything yet. Something funky is going on with boot objcopy/Image
size: I end up with an Image file (and loader/loader.bin) that are 8.5MB instead of the 1.4MB I had before pulling in Linus tree. rc1 as of this morning still shows the same problem. vmlinux is 1.8MB vs 1.9 MB before.

To check if my toolchain is broken, I recompiled the 5.6 tree I used for developing the series and I end up with a loader.bin file of 1.4 MB. All looking good. But there are changes to the vmlinux elf section headers which likely cause the huge final size I am seeing. Will try to dig into this.

Signature · 2 lines
Damien Le Moal
Western Digital Research
author maintainer
#7 lore raw
Quoted 20 lines · Damien Le Moal
Quoted 7 lines · Palmer Dabbelt

* Builds a table of device trees, keyed by mvendorid/marchid/mimpid. This allows multiple device trees to be built into the kernel. I don't really like maintaining the two lists (one in C and one in assembly) or having that function in the table, but it's the best I could come up with.
* "handles" PMP traps by just skipping the PMP setup phase.

Quoted 7 lines

I don't actually have a K210 so I can't test any of this. I also couldn't find the K210 identifiers listed anywhere online, so someone will have to dig them out of the board.

I also didn't spend any time thinking through how we free these device trees, but given that .dtb.init.rodata already exists as a section I'm just guessing that's were we're supposed to put them.

I cannot test anything yet. Something funky is going on with boot objcopy/Image
size: I end up with an Image file (and loader/loader.bin) that are 8.5MB instead of the 1.4MB I had before pulling in Linus tree. rc1 as of this morning still shows the same problem. vmlinux is 1.8MB vs 1.9 MB before.

Quoted 4 lines

To check if my toolchain is broken, I recompiled the 5.6 tree I used for developing the series and I end up with a loader.bin file of 1.4 MB. All looking good. But there are changes to the vmlinux elf section headers which likely cause the huge final size I am seeing. Will try to dig into this.

Thanks!

#8 lore raw
Quoted 21 lines · Palmer Dabbelt
Quoted 20 lines · Damien Le Moal
Quoted 7 lines · Palmer Dabbelt

* Builds a table of device trees, keyed by mvendorid/marchid/mimpid. This allows multiple device trees to be built into the kernel. I don't really like maintaining the two lists (one in C and one in assembly) or having that function in the table, but it's the best I could come up with.
* "handles" PMP traps by just skipping the PMP setup phase.

Quoted 7 lines

I don't actually have a K210 so I can't test any of this. I also couldn't find the K210 identifiers listed anywhere online, so someone will have to dig them out of the board.

I also didn't spend any time thinking through how we free these device trees, but given that .dtb.init.rodata already exists as a section I'm just guessing that's were we're supposed to put them.

I cannot test anything yet. Something funky is going on with boot objcopy/Image
size: I end up with an Image file (and loader/loader.bin) that are 8.5MB instead of the 1.4MB I had before pulling in Linus tree. rc1 as of this morning still shows the same problem. vmlinux is 1.8MB vs 1.9 MB before.

Quoted 6 lines
Quoted 4 lines

To check if my toolchain is broken, I recompiled the 5.6 tree I used for developing the series and I end up with a loader.bin file of 1.4 MB. All looking good. But there are changes to the vmlinux elf section headers which likely cause the huge final size I am seeing. Will try to dig into this.

Thanks!

I sent you fixed patches already. Please review them.
The large image size was due to the strict RWX alignment of elf sections, which can be disabled for no mmu case since there is no RW protection anyway.

Signature · 2 lines
Damien Le Moal
Western Digital Research
author maintainer
#9 lore raw
Quoted 27 lines · Damien Le Moal
Quoted 26 lines · Palmer Dabbelt
Quoted 24 lines · Damien Le Moal
Quoted 7 lines · Palmer Dabbelt

* Builds a table of device trees, keyed by mvendorid/marchid/mimpid. This allows multiple device trees to be built into the kernel. I don't really like maintaining the two lists (one in C and one in assembly) or having that function in the table, but it's the best I could come up with.
* "handles" PMP traps by just skipping the PMP setup phase.

Quoted 7 lines

I don't actually have a K210 so I can't test any of this. I also couldn't find the K210 identifiers listed anywhere online, so someone will have to dig them out of the board.

I also didn't spend any time thinking through how we free these device trees, but given that .dtb.init.rodata already exists as a section I'm just guessing that's were we're supposed to put them.

I cannot test anything yet. Something funky is going on with boot objcopy/Image
size: I end up with an Image file (and loader/loader.bin) that are 8.5MB instead of the 1.4MB I had before pulling in Linus tree. rc1 as of this morning still shows the same problem. vmlinux is 1.8MB vs 1.9 MB before.

To check if my toolchain is broken, I recompiled the 5.6 tree I used for developing the series and I end up with a loader.bin file of 1.4 MB. All looking good. But there are changes to the vmlinux elf section headers which likely cause the huge final size I am seeing. Will try to dig into this.

Quoted 5 lines
Quoted 1 line

Thanks!

I sent you fixed patches already. Please review them.
The large image size was due to the strict RWX alignment of elf sections, which can be disabled for no mmu case since there is no RW protection anyway.

That RWX thing didn't make it to my inbox for some reason, but Atish pointed it out in another thread. It's on for-next now. Thanks!

#10 lore raw
In reply to Palmer Dabbelt
Quoted 6 lines · Palmer Dabbelt

* Builds a table of device trees, keyed by mvendorid/marchid/mimpid. This allows multiple device trees to be built into the kernel. I don't really like maintaining the two lists (one in C and one in assembly) or having that function in the table, but it's the best I could come up with.
* "handles" PMP traps by just skipping the PMP setup phase.

Quoted 10 lines

I don't actually have a K210 so I can't test any of this. I also couldn't find the K210 identifiers listed anywhere online, so someone will have to dig them out of the board.

I also didn't spend any time thinking through how we free these device trees, but given that .dtb.init.rodata already exists as a section I'm just guessing that's were we're supposed to put them.

(replying to your original post instead of my update since infradead does not send me back my posts).

Palmer, have you had a chance to review the updated patches I sent for the builtin dtb ?

Signature · 2 lines
Damien Le Moal
Western Digital Research