Series-to: u-boot Cover-letter: Fix Typo error in Makefile
PATCH 1/1 Series-to: u-boot Cover-letter: Fix Typo error in Makefile
This patch fixes the typo error in Makefile where -I$(srctree)/arch/$(ARCH)/thumb1/include is not picked up in the compiler flag when compiling for thumb2. END
---
Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Makefile +1 -1
@@ -704,7 +704,7 @@ UBOOTINCLUDE := \ -Iinclude \ $(if $(KBUILD_SRC), -I$(srctree)/include) \ $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \ - $(if $(CONFIG_HAS_THUMB2),, \ + $(if $(CONFIG_HAS_THUMB2), \ -I$(srctree)/arch/$(ARCH)/thumb1/include),) \ -I$(srctree)/arch/$(ARCH)/include \ -include $(srctree)/include/linux/kconfig.h
Signature · 1 line
2.17.1
PATCH 1/1 Series-to: u-boot Cover-letter: Fix Typo error in Makefile
Hi,
Quoted 9 lines · Sicris
This patch fixes the typo error in
Makefilewhere -I$(srctree)/arch/$(ARCH)/thumb1/include is not picked up in the compiler flag when compiling for thumb2. ENDSigned-off-by Sicris <[email protected]>---
Somehow your patman tags have come through in the header. They should each be on a separate line in the commit.
Quoted 3 lines
Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Regards,
Simon
PATCH 1/1 Series-to: u-boot Cover-letter: Fix Typo error in Makefile
In reply to SicrisQuoted 16 lines · Sicris
This patch fixes the typo error in
Makefilewhere -I$(srctree)/arch/$(ARCH)/thumb1/include is not picked up in the compiler flag when compiling for thumb2. ENDSigned-off-by Sicris <[email protected]>---
Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Makefile +0
-0
Makefile UBOOTINCLUDE := \ · line 708
Quoted 6 lines
Makefile +1
-1@@ -704,7 +704,7 @@ UBOOTINCLUDE := \ -Iinclude \ $(if $(KBUILD_SRC), -I$(srctree)/include) \ $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \ - $(if $(CONFIG_HAS_THUMB2),, \ + $(if $(CONFIG_HAS_THUMB2), \ -I$(srctree)/arch/$(ARCH)/thumb1/include),) \
This patch relates to
https://stackoverflow.com/questions/61097841/error-selected-processor-does-not-support-requested-special-purpose-register
The original problem was using the wrong compiler as discussed on Stackoverflow.
Compiling stm32f769-disco_defconfig works fine using the Debian Bullseye package gcc-arm-linux-gnueabi without this patch.
The current logic is:
If it is thumb and not thumb2, include the thumb1 directory. If it is thumb and thumb2, do not include the thumb1 directory.
You are inverting the logic with your patch:
If it is thumb and thumb2, include the thumb1 directory. If it is thumb and not thumb2, do not include the thumb1 directory.
This does not make much sense to me.
For understanding the if-statement I found the following Makefile useful:
----
all:
????????$(if ,,echo 1)
????????$(if ,echo 2)
????????$(if 1,,echo 3)
????????$(if 1,echo 4)
---
The output contains 1 and 4.
Best regards
Heinrich
Quoted 3 lines
Makefile +0
-0-I$(srctree)/arch/$(ARCH)/include \ -include $(srctree)/include/linux/kconfig.h
PATCH 1/1 Series-to: u-boot Cover-letter: Fix Typo error in Makefile
Quoted 28 lines · Heinrich Schuchardt
Quoted 16 lines · Sicris
This patch fixes the typo error in
Makefilewhere -I$(srctree)/arch/$(ARCH)/thumb1/include is not picked up in the compiler flag when compiling for thumb2. ENDSigned-off-by Sicris <[email protected]>---
Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Makefile +0
-0Makefile UBOOTINCLUDE := \ · line 708
Quoted 6 lines
Makefile +1
-1@@ -704,7 +704,7 @@ UBOOTINCLUDE := \ -Iinclude \ $(if $(KBUILD_SRC), -I$(srctree)/include) \ $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \ - $(if $(CONFIG_HAS_THUMB2),, \ + $(if $(CONFIG_HAS_THUMB2), \ -I$(srctree)/arch/$(ARCH)/thumb1/include),) \This patch relates to
https://stackoverflow.com/questions/61097841/error-selected-processor-does-not-support-requested-special-purpose-register
Quoted 2 lines
The original problem was using the wrong compiler as discussed on Stackoverflow.
Sorry, I was not very clear on the problem that I've encountered.
I tried the M-profile as suggested in the stackoverflow comment from Frant. However, I still get the same error
with CONFIG_CMD_UBI=y.
{standard input}:757: Error: selected processor does not support requested special purpose register ? msr cpsr_c,r3
This is due to the assembly inline function local_irq_save() / local_irq_restore. On closer inspection,
the wrong header for local_irq_save / local_irq_restore was picked up by the compiler.
Wrong Header: /arch/arm/include/asm/proc-armv/system.h (Closest i can find) Correct Header:
/arch/arm/thumb1/include/asm/proc-armv/system.h
Quoted 3 lines
Compiling stm32f769-disco_defconfig works fine using the Debian Bullseye package gcc-arm-linux-gnueabi without this patch.
Can you help me check if this compiles using Debian Bullseye with CONFIG_CMD_UBI=y?
Quoted 5 lines
The current logic is:
If it is thumb and not thumb2, include the thumb1 directory. If it is thumb and thumb2, do not include the thumb1 directory.
Quoted 7 lines
You are inverting the logic with your patch:
If it is thumb and thumb2, include the thumb1 directory. If it is thumb and not thumb2, do not include the thumb1 directory.
This does not make much sense to me.
Does this suggestion make sense?
$(if $(CONFIG_HAS_THUMB2), \
-I$(srctree)/arch/$(ARCH)/thumb2/include),
-I$(srctree)/arch/$(ARCH)/thumb1/include),) \with thumb2/include contains the same thumb1/include contents.
Quoted 8 lines
For understanding the if-statement I found the following
Makefileuseful:----
all:$(if ,,echo 1) $(if ,echo 2) $(if 1,,echo 3) $(if 1,echo 4)
Quoted 13 lines
---
The output contains 1 and 4.
Best regards
Heinrich
Quoted 3 lines
Makefile +0
-0-I$(srctree)/arch/$(ARCH)/include \ -include $(srctree)/include/linux/kconfig.h
cheers,
Sicris Rey
PATCH 1/1 Series-to: u-boot Cover-letter: Fix Typo error in Makefile
Quoted 51 lines · Sicris Rey Embay
Quoted 28 lines · Heinrich Schuchardt
Quoted 16 lines · Sicris
This patch fixes the typo error in
Makefilewhere -I$(srctree)/arch/$(ARCH)/thumb1/include is not picked up in the compiler flag when compiling for thumb2. ENDSigned-off-by Sicris <[email protected]>---
Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Makefile +0
-0Makefile UBOOTINCLUDE := \ · line 708
Quoted 6 lines
Makefile +1
-1@@ -704,7 +704,7 @@ UBOOTINCLUDE := \ -Iinclude \ $(if $(KBUILD_SRC), -I$(srctree)/include) \ $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \ - $(if $(CONFIG_HAS_THUMB2),, \ + $(if $(CONFIG_HAS_THUMB2), \ -I$(srctree)/arch/$(ARCH)/thumb1/include),) \This patch relates to
https://stackoverflow.com/questions/61097841/error-selected-processor-does-not-support-requested-special-purpose-registerQuoted 2 lines
The original problem was using the wrong compiler as discussed on Stackoverflow.
Sorry, I was not very clear on the problem that I've encountered.
I tried the M-profile as suggested in the stackoverflow comment from Frant. However, I still get the same error
withCONFIG_CMD_UBI=y.{standard input}:757: Error: selected processor does not support requested special purpose register ? msr cpsr_c,r3
This is due to the assembly inline function
local_irq_save()/local_irq_restore. On closer inspection,
the wrong header forlocal_irq_save/local_irq_restorewas picked up by the compiler.Wrong Header: /arch/arm/include/asm/proc-armv/system.h (Closest i can find) Correct Header:
/arch/arm/thumb1/include/asm/proc-armv/system.hQuoted 1 line
Quoted 5 lines
Quoted 2 lines
Compiling stm32f769-disco_defconfig works fine using the Debian Bullseye package gcc-arm-linux-gnueabi without this patch.
Can you help me check if this compiles using Debian Bullseye with
CONFIG_CMD_UBI=y?
With this selected compiling fails.
{standard input}:965: Error: selected processor does not support requested special purpose register -- `mrs r1,cpsr'
The CPSR register is not present on ARMv6-M and ARMv7-M processors.
So on these architectures arch/arm/include/asm/proc-armv/system.h has to be replaced by arch/arm/thumb1/include/asm/proc-armv/system.h.
Quoted 10 lines
Quoted 10 lines
The current logic is:
If it is thumb and not thumb2, include the thumb1 directory. If it is thumb and thumb2, do not include the thumb1 directory.You are inverting the logic with your patch:
If it is thumb and thumb2, include the thumb1 directory. If it is thumb and not thumb2, do not include the thumb1 directory.
Quoted 8 lines
Quoted 2 lines
This does not make much sense to me.
Does this suggestion make sense?
$(if $(CONFIG_HAS_THUMB2), \ -I$(srctree)/arch/$(ARCH)/thumb2/include), -I$(srctree)/arch/$(ARCH)/thumb1/include),) \
We do not want to use a special include on ARMv7-A even if building in thumbs mode. So we should explicitly check the CPU architecture here.
If CONFIG_HAS_THUMB2 is undefined or CONFIG_CPU_V7M is defined, we should use -I$(srctree)/arch/$(ARCH)/thumb1/include.
Makefile +10 -8
@@ -701,13 +701,15 @@ KBUILD_CFLAGS += $(KCFLAGS) # Use UBOOTINCLUDE when you must reference the include/ directory. # Needed to be compatible with the O= option -UBOOTINCLUDE := \ - -Iinclude \ - $(if $(KBUILD_SRC), -I$(srctree)/include) \ - $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \ - $(if $(CONFIG_HAS_THUMB2),, \ - -I$(srctree)/arch/$(ARCH)/thumb1/include),) \ - -I$(srctree)/arch/$(ARCH)/include \ - -include $(srctree)/include/linux/kconfig.h +UBOOTINCLUDE := \ + -Iinclude \ + $(if $(KBUILD_SRC), -I$(srctree)/include) \ + $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \ + $(if $(CONFIG_HAS_THUMB2), \ + $(if $(CONFIG_CPU_V7M), \ + -I$(srctree)/arch/arm/thumb1/include), \ + -I$(srctree)/arch/arm/thumb1/include)) \ + -I$(srctree)/arch/$(ARCH)/include \ + -include $(srctree)/include/linux/kconfig.h
Best regards
Heinrich
Quoted 28 lines
with thumb2/include contains the same thumb1/include contents.
Quoted 8 lines
For understanding the if-statement I found the following
Makefileuseful:----
all:$(if ,,echo 1) $(if ,echo 2) $(if 1,,echo 3) $(if 1,echo 4)Quoted 13 lines
---
The output contains 1 and 4.
Best regards
Heinrich
Quoted 3 lines
Makefile +0
-0-I$(srctree)/arch/$(ARCH)/include \ -include $(srctree)/include/linux/kconfig.hcheers,
Sicris Rey
PATCH 1/1 Series-to: u-boot Cover-letter: Fix Typo error in Makefile
In reply to Heinrich SchuchardtQuoted 54 lines · Heinrich Schuchardt
Quoted 16 lines · Sicris
This patch fixes the typo error in
Makefilewhere -I$(srctree)/arch/$(ARCH)/thumb1/include is not picked up in the compiler flag when compiling for thumb2. ENDSigned-off-by Sicris <[email protected]>---
Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Makefile +0
-0Makefile UBOOTINCLUDE := \ · line 708
Quoted 6 lines
Makefile +1
-1@@ -704,7 +704,7 @@ UBOOTINCLUDE := \ -Iinclude \ $(if $(KBUILD_SRC), -I$(srctree)/include) \ $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \ - $(if $(CONFIG_HAS_THUMB2),, \ + $(if $(CONFIG_HAS_THUMB2), \ -I$(srctree)/arch/$(ARCH)/thumb1/include),) \This patch relates to
https://stackoverflow.com/questions/61097841/error-selected-processor-does-not-support-requested-special-purpose-registerThe original problem was using the wrong compiler as discussed on Stackoverflow.
Compiling stm32f769-disco_defconfig works fine using the Debian Bullseye package gcc-arm-linux-gnueabi without this patch.
The current logic is:
If it is thumb and not thumb2, include the thumb1 directory. If it is thumb and thumb2, do not include the thumb1 directory.You are inverting the logic with your patch:
If it is thumb and thumb2, include the thumb1 directory. If it is thumb and not thumb2, do not include the thumb1 directory.
This does not make much sense to me.
For understanding the if-statement I found the following
Makefileuseful:----
all:
????????$(if ,,echo 1)
????????$(if ,echo 2)
????????$(if 1,,echo 3)
????????$(if 1,echo 4)
---
Quoted 1 line
The output contains 1 and 4.
Perhaps things need testing with a bit wider range of compilers, to make sure we're doing the right thing in all cases, and then perhaps changing the logic to make sure we pass the right flags for what we're told to build for.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200409/8a33229c/attachment.sig>