Skip to contentSkip to conversation

Dockerfile: Switch to gcc 9.2.0

PATCH New Bin Meng 2 participants 4 messages Apr 6, 2020 – Apr 10, 2020

lore
Share & tools
lore

Bin Meng

author
#0 lore raw

PATCH 1/1 Dockerfile: Switch to gcc 9.2.0

Use gcc 9.2.0 to do the build testing.

---
This depends on the following series:
http://patchwork.ozlabs.org/project/uboot/list/?series=166924

 Dockerfile | 64 +++++++++++++++++++++++++++++++-------------------------------
 1 file changed, 32 insertions(+), 32 deletions(-)
Dockerfile +32 -32
index 3a94eb4..e47b4ed 100644
@@ -15,17 +15,17 @@ RUN wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key | apt-key add -
 RUN echo deb http://apt.llvm.org/bionic/ llvm-toolchain-bionic-7 main | tee /etc/apt/sources.list.d/llvm.list
 
 # Manually install the kernel.org "Crosstool" based toolchains for gcc-7.3
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/x86_64-gcc-7.3.0-nolibc_aarch64-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/x86_64-gcc-7.3.0-nolibc_arm-linux-gnueabi.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/x86_64-gcc-7.3.0-nolibc_i386-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/x86_64-gcc-7.3.0-nolibc_m68k-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/x86_64-gcc-7.3.0-nolibc_mips-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/x86_64-gcc-7.3.0-nolibc_microblaze-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/x86_64-gcc-7.3.0-nolibc_nios2-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/x86_64-gcc-7.3.0-nolibc_powerpc-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/x86_64-gcc-7.3.0-nolibc_riscv32-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/x86_64-gcc-7.3.0-nolibc_riscv64-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/x86_64-gcc-7.3.0-nolibc_sh2-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-aarch64-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-arm-linux-gnueabi.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-i386-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-m68k-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-mips-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-microblaze-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-nios2-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-powerpc-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-riscv32-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-riscv64-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-sh2-linux.tar.xz | tar -C /opt -xJ
 
 # Manually install other toolchains
 RUN wget -O - https://github.com/foss-xtensa/toolchain/releases/download/2018.02/x86_64-2018.02-xtensa-dc233c-elf.tar.gz | tar -C /opt -xz
@@ -104,11 +104,11 @@ RUN git clone git://git.savannah.gnu.org/grub.git /tmp/grub && \
 	mkdir -p /opt/grub && \
 	./configure --target=aarch64 --with-platform=efi \
 	CC=gcc \
-	TARGET_CC=/opt/gcc-7.3.0-nolibc/aarch64-linux/bin/aarch64-linux-gcc \
-	TARGET_OBJCOPY=/opt/gcc-7.3.0-nolibc/aarch64-linux/bin/aarch64-linux-objcopy \
-	TARGET_STRIP=/opt/gcc-7.3.0-nolibc/aarch64-linux/bin/aarch64-linux-strip \
-	TARGET_NM=/opt/gcc-7.3.0-nolibc/aarch64-linux/bin/aarch64-linux-nm \
-	TARGET_RANLIB=/opt/gcc-7.3.0-nolibc/aarch64-linux/bin/aarch64-linux-ranlib && \
+	TARGET_CC=/opt/gcc-9.2.0-nolibc/aarch64-linux/bin/aarch64-linux-gcc \
+	TARGET_OBJCOPY=/opt/gcc-9.2.0-nolibc/aarch64-linux/bin/aarch64-linux-objcopy \
+	TARGET_STRIP=/opt/gcc-9.2.0-nolibc/aarch64-linux/bin/aarch64-linux-strip \
+	TARGET_NM=/opt/gcc-9.2.0-nolibc/aarch64-linux/bin/aarch64-linux-nm \
+	TARGET_RANLIB=/opt/gcc-9.2.0-nolibc/aarch64-linux/bin/aarch64-linux-ranlib && \
 	make && \
 	./grub-mkimage -O arm64-efi -o /opt/grub/grubaa64.efi --prefix= -d \
 	grub-core cat chain configfile echo efinet ext2 fat halt help linux \
@@ -118,11 +118,11 @@ RUN git clone git://git.savannah.gnu.org/grub.git /tmp/grub && \
 	make clean && \
 	./configure --target=arm --with-platform=efi \
 	CC=gcc \
-	TARGET_CC=/opt/gcc-7.3.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-gcc \
-	TARGET_OBJCOPY=/opt/gcc-7.3.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-objcopy \
-	TARGET_STRIP=/opt/gcc-7.3.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-strip \
-	TARGET_NM=/opt/gcc-7.3.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-nm \
-	TARGET_RANLIB=/opt/gcc-7.3.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-ranlib && \
+	TARGET_CC=/opt/gcc-9.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-gcc \
+	TARGET_OBJCOPY=/opt/gcc-9.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-objcopy \
+	TARGET_STRIP=/opt/gcc-9.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-strip \
+	TARGET_NM=/opt/gcc-9.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-nm \
+	TARGET_RANLIB=/opt/gcc-9.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-ranlib && \
 	make && \
 	./grub-mkimage -O arm-efi -o /opt/grub/grubarm.efi --prefix= -d \
 	grub-core cat chain configfile echo efinet ext2 fat halt help linux \
@@ -132,11 +132,11 @@ RUN git clone git://git.savannah.gnu.org/grub.git /tmp/grub && \
 	make clean && \
 	./configure --target=riscv64 --with-platform=efi \
 	CC=gcc \
-	TARGET_CC=/opt/gcc-7.3.0-nolibc/riscv64-linux/bin/riscv64-linux-gcc \
-	TARGET_OBJCOPY=/opt/gcc-7.3.0-nolibc/riscv64-linux/bin/riscv64-linux-objcopy \
-	TARGET_STRIP=/opt/gcc-7.3.0-nolibc/riscv64-linux/bin/riscv64-linux-strip \
-	TARGET_NM=/opt/gcc-7.3.0-nolibc/riscv64-linux/bin/riscv64-linux-nm \
-	TARGET_RANLIB=/opt/gcc-7.3.0-nolibc/riscv64-linux/bin/riscv64-linux-ranlib && \
+	TARGET_CC=/opt/gcc-9.2.0-nolibc/riscv64-linux/bin/riscv64-linux-gcc \
+	TARGET_OBJCOPY=/opt/gcc-9.2.0-nolibc/riscv64-linux/bin/riscv64-linux-objcopy \
+	TARGET_STRIP=/opt/gcc-9.2.0-nolibc/riscv64-linux/bin/riscv64-linux-strip \
+	TARGET_NM=/opt/gcc-9.2.0-nolibc/riscv64-linux/bin/riscv64-linux-nm \
+	TARGET_RANLIB=/opt/gcc-9.2.0-nolibc/riscv64-linux/bin/riscv64-linux-ranlib && \
 	make && \
 	./grub-mkimage -O riscv64-efi -o /opt/grub/grubriscv64.efi --prefix= -d \
 	grub-core cat chain configfile echo efinet ext2 fat halt help linux \
@@ -146,11 +146,11 @@ RUN git clone git://git.savannah.gnu.org/grub.git /tmp/grub && \
 	make clean && \
 	./configure --target=riscv32 --with-platform=efi \
 	CC=gcc \
-	TARGET_CC=/opt/gcc-7.3.0-nolibc/riscv32-linux/bin/riscv32-linux-gcc \
-	TARGET_OBJCOPY=/opt/gcc-7.3.0-nolibc/riscv32-linux/bin/riscv32-linux-objcopy \
-	TARGET_STRIP=/opt/gcc-7.3.0-nolibc/riscv32-linux/bin/riscv32-linux-strip \
-	TARGET_NM=/opt/gcc-7.3.0-nolibc/riscv32-linux/bin/riscv32-linux-nm \
-	TARGET_RANLIB=/opt/gcc-7.3.0-nolibc/riscv32-linux/bin/riscv32-linux-ranlib && \
+	TARGET_CC=/opt/gcc-9.2.0-nolibc/riscv32-linux/bin/riscv32-linux-gcc \
+	TARGET_OBJCOPY=/opt/gcc-9.2.0-nolibc/riscv32-linux/bin/riscv32-linux-objcopy \
+	TARGET_STRIP=/opt/gcc-9.2.0-nolibc/riscv32-linux/bin/riscv32-linux-strip \
+	TARGET_NM=/opt/gcc-9.2.0-nolibc/riscv32-linux/bin/riscv32-linux-nm \
+	TARGET_RANLIB=/opt/gcc-9.2.0-nolibc/riscv32-linux/bin/riscv32-linux-ranlib && \
 	make && \
 	./grub-mkimage -O riscv32-efi -o /opt/grub/grubriscv32.efi --prefix= -d \
 	grub-core cat chain configfile echo efinet ext2 fat halt help linux \
@@ -174,7 +174,7 @@ USER uboot:uboot
 
 # Create the buildman config file
 RUN /bin/echo -e "[toolchain]\nroot = /usr" > ~/.buildman
-RUN /bin/echo -e "kernelorg = /opt/gcc-7.3.0-nolibc/*" >> ~/.buildman
+RUN /bin/echo -e "kernelorg = /opt/gcc-9.2.0-nolibc/*" >> ~/.buildman
 RUN /bin/echo -e "arc = /opt/arc_gnu_2018.09_prebuilt_uclibc_le_archs_linux_install" >> ~/.buildman
 RUN /bin/echo -e "\n[toolchain-prefix]\nxtensa = /opt/2018.02/xtensa-dc233c-elf/bin/xtensa-dc233c-elf-" >> ~/.buildman;
 RUN /bin/echo -e "\nnds32 = /opt/nds32le-linux-glibc-v3-upstream/bin/nds32le-linux-" >> ~/.buildman;
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/1 Dockerfile: Switch to gcc 9.2.0

Quoted 3 lines · Bin Meng

Use gcc 9.2.0 to do the build testing.

Oh nice. Do we luck out and have no new warnings to fix? Thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200406/2b2746fb/attachment.sig>
author
#2 lore raw

PATCH 1/1 Dockerfile: Switch to gcc 9.2.0

Hi Tom,

Quoted 8 lines · Tom Rini
Quoted 3 lines · Bin Meng

Use gcc 9.2.0 to do the build testing.

Oh nice. Do we luck out and have no new warnings to fix? Thanks!

Yep, looks there is only one build warning to fix.

The GCC 8 bug that caused the build failure for x86 codes is fixed in GCC 9.
https://lists.denx.de/pipermail/u-boot/2018-October/345925.html

So it's time to switch to a newer version compiler :)

Regards,
Bin

Applied
#3 lore raw

PATCH 1/1 Dockerfile: Switch to gcc 9.2.0

In reply to Bin Meng
Quoted 3 lines · Bin Meng

Use gcc 9.2.0 to do the build testing.

Applied to gitlab-ci-runner/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200410/da906df1/attachment.sig>