Skip to contentSkip to conversation

h8300: set stdout-path to a string, not a phandle

PATCH New Masahiro Yamada 1 participant 1 message Apr 13, 2020 Device tree bindings

lore
Share & tools
lore

Masahiro Yamada

author
#0 lore raw

PATCH 1/1 h8300: set stdout-path to a string, not a phandle

stdout-path must be a node path, not a phandle.

DTC warns like follows:

DTC arch/h8300/boot/dts/h8s_sim.dtb
arch/h8300/boot/dts/h8s_sim.dts:11.3-25: Warning (chosen_node_stdout_path): /chosen:stdout-path: property is not a string

Signed-off-by Masahiro Yamada <[email protected]>

---

 arch/h8300/boot/dts/h8300h_sim.dts | 2 +-
 arch/h8300/boot/dts/h8s_sim.dts    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
arch/h8300/boot/dts/h8300h_sim.dts +1 -1
index 595398b9d018..e1d4d9b7f6b4 100644
@@ -8,7 +8,7 @@ / {
 
 	chosen {
 		bootargs = "earlyprintk=h8300-sim";
-		stdout-path = <&sci0>;
+		stdout-path = &sci0;
 	};
 	aliases {
 		serial0 = &sci0;
arch/h8300/boot/dts/h8s_sim.dts +1 -1
index 932cc3c5a81b..4848e40e607e 100644
@@ -8,7 +8,7 @@ / {
 
 	chosen {
 		bootargs = "earlyprintk=h8300-sim";
-		stdout-path = <&sci0>;
+		stdout-path = &sci0;
 	};
 	aliases {
 		serial0 = &sci0;
Signature · 1 line
2.25.1