Skip to contentSkip to conversation

Introduce the request_atomic() for the host

PATCH In review Baolin Wang 4 participants 10 messages Apr 13, 2020 – Apr 17, 2020

Subsystems (3)
lore
Share & tools
lore

Baolin Wang

author maintainer
#0 lore raw

v5 cover Introduce the request_atomic() for the host

This patch set introduces a new request_atomic() interface for the MMC host controller, which is used to submit a request to host in the atomic context, such as in the irq hard handler, to reduce the request latency.

Note, this patch set is based on Adrian's patch set:
https://www.spinics.net/lists/linux-mmc/msg58529.html

Any comments are welcome. Thanks.

Changes from v4:
- Remove redundant checking when warning the return value of request_atomic().
- Add acked tag from Adrian for patch 1.
- Re-implement the request_atomic() based on the Adrian's patch set.

Changes from v3:
- Move patch 3 of V3 patch set into patch 1.
- Add a warning for unexpected return value of request_atomic().
- Remove redundant checking of ops->request().

Changes from v2:
- Return busy flag if encountering unusual card busy state instead of polling in interrupt context.
- Add a work for HSQ to try again in non-atomic context if the host returns busy flag.

Changes from v1:
- Re-split the changes to make them more clear suggested by Ulf.
- Factor out the auto CMD23 checking into a separate function.

Baolin Wang (3):
mmc: host: Introduce the request_atomic() for the host
mmc: host: sdhci: Implement the request_atomic() API
mmc: host: sdhci-sprd: Implement the request_atomic() API

 drivers/mmc/host/mmc_hsq.c    | 29 ++++++++++++++++++++++++++++-
 drivers/mmc/host/mmc_hsq.h    |  1 +
 drivers/mmc/host/sdhci-sprd.c | 23 ++++++++++++++++++++---
 drivers/mmc/host/sdhci.c      | 34 ++++++++++++++++++++++++++++++++++
 drivers/mmc/host/sdhci.h      |  1 +
 include/linux/mmc/host.h      |  3 +++
 6 files changed, 87 insertions(+), 4 deletions(-)
Signature · 1 line
2.17.1
author maintainer
#1 lore raw

PATCH v5 1/3 mmc: host: Introduce the request_atomic() for the host

The SD host controller can process one request in the atomic context if the card is nonremovable, which means we can submit next request in the irq hard handler when using the MMC host software queue to reduce the latency. Thus this patch adds a new API request_atomic() for the host controller, as well as adding support for host software queue to submit a request by the new request_atomic() API.

Moreover there is an unusual case that the card is busy when trying to send a command, and we can not polling the card status in interrupt context by using request_atomic() to dispatch requests. Thus we should queue a work to try again in the non-atomic context in case the host releases the busy signal later.

---
 drivers/mmc/host/mmc_hsq.c | 29 ++++++++++++++++++++++++++++-
 drivers/mmc/host/mmc_hsq.h |  1 +
 include/linux/mmc/host.h   |  3 +++
 3 files changed, 32 insertions(+), 1 deletion(-)
drivers/mmc/host/mmc_hsq.c +28 -1
index b90b2c97b6cf..a5e05ed0fda3 100644
@@ -16,11 +16,20 @@
 #define HSQ_NUM_SLOTS	64
 #define HSQ_INVALID_TAG	HSQ_NUM_SLOTS
 
+static void mmc_hsq_retry_handler(struct work_struct *work)
+{
+	struct mmc_hsq *hsq = container_of(work, struct mmc_hsq, retry_work);
+	struct mmc_host *mmc = hsq->mmc;
+
+	mmc->ops->request(mmc, hsq->mrq);
+}
+
 static void mmc_hsq_pump_requests(struct mmc_hsq *hsq)
 {
 	struct mmc_host *mmc = hsq->mmc;
 	struct hsq_slot *slot;
 	unsigned long flags;
+	int ret = 0;
 
 	spin_lock_irqsave(&hsq->lock, flags);
 
@@ -42,7 +51,24 @@ static void mmc_hsq_pump_requests(struct mmc_hsq *hsq)
 
 	spin_unlock_irqrestore(&hsq->lock, flags);
 
-	mmc->ops->request(mmc, hsq->mrq);
+	if (mmc->ops->request_atomic)
+		ret = mmc->ops->request_atomic(mmc, hsq->mrq);
+	else
+		mmc->ops->request(mmc, hsq->mrq);
+
+	/*
+	 * If returning BUSY from request_atomic(), which means the card
+	 * may be busy now, and we should change to non-atomic context to
+	 * try again for this unusual case, to avoid time-consuming operations
+	 * in the atomic context.
+	 *
+	 * Note: we just give a warning for other error cases, since the host
+	 * driver will handle them.
+	 */
+	if (ret == -EBUSY)
+		schedule_work(&hsq->retry_work);
+	else
+		WARN_ON_ONCE(ret);
 }
 
 static void mmc_hsq_update_next_tag(struct mmc_hsq *hsq, int remains)
@@ -325,6 +351,7 @@ int mmc_hsq_init(struct mmc_hsq *hsq, struct mmc_host *mmc)
 	hsq->mmc->cqe_private = hsq;
 	mmc->cqe_ops = &mmc_hsq_ops;
 
+	INIT_WORK(&hsq->retry_work, mmc_hsq_retry_handler);
 	spin_lock_init(&hsq->lock);
 	init_waitqueue_head(&hsq->wait_queue);
 
drivers/mmc/host/mmc_hsq.h +1 -0
index 18b9cf55925f..ffdd9cd172c3 100644
@@ -12,6 +12,7 @@ struct mmc_hsq {
 	wait_queue_head_t wait_queue;
 	struct hsq_slot *slot;
 	spinlock_t lock;
+	struct work_struct retry_work;
 
 	int next_tag;
 	int num_slots;
include/linux/mmc/host.h +3 -0
index c318fb5b6a94..d4a50e5dc111 100644
@@ -92,6 +92,9 @@ struct mmc_host_ops {
 			    int err);
 	void	(*pre_req)(struct mmc_host *host, struct mmc_request *req);
 	void	(*request)(struct mmc_host *host, struct mmc_request *req);
+	/* Submit one request to host in atomic context. */
+	int	(*request_atomic)(struct mmc_host *host,
+				  struct mmc_request *req);
 
 	/*
 	 * Avoid calling the next three functions too often or in a "fast
Signature · 1 line
2.17.1
author maintainer
#2 lore raw

PATCH v5 2/3 mmc: host: sdhci: Implement the request_atomic() API

In reply to Baolin Wang

Implement the request_atomic() ops for the sdhci driver to process one request in the atomic context if the card is nonremovable.

Moreover, we should return BUSY flag if controller has not released the inhibit bits to allow HSQ trying to send request again in non-atomic context.

---
 drivers/mmc/host/sdhci.c | 34 ++++++++++++++++++++++++++++++++++
 drivers/mmc/host/sdhci.h |  1 +
 2 files changed, 35 insertions(+)
drivers/mmc/host/sdhci.c +34 -0
index 10b9570f48aa..0baef595de26 100644
@@ -2144,6 +2144,40 @@ void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 }
 EXPORT_SYMBOL_GPL(sdhci_request);
 
+int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct mmc_command *cmd;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (sdhci_present_error(host, mrq->cmd, true)) {
+		sdhci_finish_mrq(host, mrq);
+		goto out_finish;
+	}
+
+	cmd = sdhci_manual_cmd23(host, mrq) ? mrq->sbc : mrq->cmd;
+
+	/*
+	 * The HSQ may send a command in interrupt context without polling
+	 * the busy signaling, which means we should return BUSY if controller
+	 * has not released inhibit bits to allow HSQ trying to send request
+	 * again in non-atomic context. So we should not finish this request
+	 * here.
+	 */
+	if (!sdhci_send_command(host, cmd))
+		ret = -EBUSY;
+	else
+		sdhci_led_activate(host);
+
+out_finish:
+	spin_unlock_irqrestore(&host->lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(sdhci_request_atomic);
+
 void sdhci_set_bus_width(struct sdhci_host *host, int width)
 {
 	u8 ctrl;
drivers/mmc/host/sdhci.h +1 -0
index a7e469c00617..4bd70da7aa00 100644
@@ -776,6 +776,7 @@ void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
 void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
 			   unsigned short vdd);
 void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq);
+int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
 void sdhci_set_bus_width(struct sdhci_host *host, int width);
 void sdhci_reset(struct sdhci_host *host, u8 mask);
 void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
Signature · 1 line
2.17.1
#3 lore raw

Re: [PATCH v5 2/3] mmc: host: sdhci: Implement the request_atomic() API

I love your patch! Yet something to improve:

Hi Baolin,

I love your patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v5.7-rc1 next-20200412]
[cannot apply to arm-soc/for-next]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Baolin-Wang/Introduce-the-request_atomic-for-the-host/20200413-105346
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 8f3d9f354286745c751374f5f1fcafee6b3f3136
config: riscv-allyesconfig (attached as .config)
compiler: riscv64-linux-gcc (GCC) 9.3.0

reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
GCC_VERSION=9.3.0 make.cross ARCH=riscv

If you fix the issue, kindly add following tag as appropriate

All errors (new ones prefixed by >>):

drivers/mmc/host/sdhci.c: In function 'sdhci_request_atomic':

>> drivers/mmc/host/sdhci.c:2076:6: error: implicit declaration of function 'sdhci_present_error' [-Werror=implicit-function-declaration]
    2076 |  if (sdhci_present_error(host, mrq->cmd, true)) {
         |      ^~~~~~~~~~~~~~~~~~~
>> drivers/mmc/host/sdhci.c:2081:8: error: implicit declaration of function 'sdhci_manual_cmd23'; did you mean 'sdhci_auto_cmd12'? [-Werror=implicit-function-declaration]
    2081 |  cmd = sdhci_manual_cmd23(host, mrq) ? mrq->sbc : mrq->cmd;
         |        ^~~~~~~~~~~~~~~~~~
         |        sdhci_auto_cmd12
>> drivers/mmc/host/sdhci.c:2090:6: error: invalid use of void expression
    2090 |  if (!sdhci_send_command(host, cmd))
         |      ^

cc1: some warnings being treated as errors

vim +/sdhci_present_error +2076 drivers/mmc/host/sdhci.c

2066
2067 int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq)
2068 {
2069 struct sdhci_host *host = mmc_priv(mmc);
2070 struct mmc_command *cmd;
2071 unsigned long flags;
2072 int ret = 0;
2073
2074 spin_lock_irqsave(&host->lock, flags);
2075

> 2076		if (sdhci_present_error(host, mrq->cmd, true)) {
  2077			sdhci_finish_mrq(host, mrq);
  2078			goto out_finish;
  2079		}
  2080	
> 2081		cmd = sdhci_manual_cmd23(host, mrq) ? mrq->sbc : mrq->cmd;
  2082	
  2083		/*
  2084		 * The HSQ may send a command in interrupt context without polling
  2085		 * the busy signaling, which means we should return BUSY if controller
  2086		 * has not released inhibit bits to allow HSQ trying to send request
  2087		 * again in non-atomic context. So we should not finish this request
  2088		 * here.
  2089		 */
> 2090		if (!sdhci_send_command(host, cmd))

2091 ret = -EBUSY;
2092 else
2093 sdhci_led_activate(host);
2094
2095 out_finish:
2096 spin_unlock_irqrestore(&host->lock, flags);
2097 return ret;
2098 }
2099 EXPORT_SYMBOL_GPL(sdhci_request_atomic);
2100

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

#4 lore raw

Re: [PATCH v5 2/3] mmc: host: sdhci: Implement the request_atomic() API

In reply to Baolin Wang
I love your patch! Yet something to improve:

Hi Baolin,

I love your patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v5.7-rc1 next-20200412]
[cannot apply to arm-soc/for-next]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Baolin-Wang/Introduce-the-request_atomic-for-the-host/20200413-105346
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 8f3d9f354286745c751374f5f1fcafee6b3f3136
config: x86_64-randconfig-s2-20200413 (attached as .config)
compiler: gcc-5 (Ubuntu 5.5.0-12ubuntu1) 5.5.0 20171010
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

If you fix the issue, kindly add following tag as appropriate

All error/warnings (new ones prefixed by >>):

In file included from include/linux/build_bug.h:5:0,
from include/linux/bitfield.h:10,
from drivers/mmc/host/sdhci.c:12:
drivers/mmc/host/sdhci.c: In function 'sdhci_request_atomic':
drivers/mmc/host/sdhci.c:2076:6: error: implicit declaration of function 'sdhci_present_error' [-Werror=implicit-function-declaration]

     if (sdhci_present_error(host, mrq->cmd, true)) {
         ^
   include/linux/compiler.h:58:52: note: in definition of macro '__trace_if_var'
    #define __trace_if_var(cond) (__builtin_constant_p(cond) ? (cond) : __trace_if_value(cond))
                                                       ^
>> drivers/mmc/host/sdhci.c:2076:2: note: in expansion of macro 'if'
     if (sdhci_present_error(host, mrq->cmd, true)) {
     ^
   drivers/mmc/host/sdhci.c:2081:8: error: implicit declaration of function 'sdhci_manual_cmd23' [-Werror=implicit-function-declaration]
     cmd = sdhci_manual_cmd23(host, mrq) ? mrq->sbc : mrq->cmd;
           ^
   drivers/mmc/host/sdhci.c:2090:2: error: invalid use of void expression
     if (!sdhci_send_command(host, cmd))
     ^
   drivers/mmc/host/sdhci.c:2090:2: error: invalid use of void expression
   In file included from include/linux/build_bug.h:5:0,
                    from include/linux/bitfield.h:10,
                    from drivers/mmc/host/sdhci.c:12:
>> include/linux/compiler.h:61:16: error: invalid use of void expression
     static struct ftrace_branch_data  \
                   ^
   include/linux/compiler.h:58:69: note: in expansion of macro '__trace_if_value'
    #define __trace_if_var(cond) (__builtin_constant_p(cond) ? (cond) : __trace_if_value(cond))
                                                                        ^
   include/linux/compiler.h:56:28: note: in expansion of macro '__trace_if_var'
    #define if(cond, ...) if ( __trace_if_var( !!(cond , ## __VA_ARGS__) ) )
                               ^

drivers/mmc/host/sdhci.c:2090:2: note: in expansion of macro 'if'
if (!sdhci_send_command(host, cmd))
^
cc1: some warnings being treated as errors

vim +/if +2076 drivers/mmc/host/sdhci.c

2066
2067 int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq)
2068 {
2069 struct sdhci_host *host = mmc_priv(mmc);
2070 struct mmc_command *cmd;
2071 unsigned long flags;
2072 int ret = 0;
2073
2074 spin_lock_irqsave(&host->lock, flags);
2075

> 2076		if (sdhci_present_error(host, mrq->cmd, true)) {

2077 sdhci_finish_mrq(host, mrq);
2078 goto out_finish;
2079 }
2080
2081 cmd = sdhci_manual_cmd23(host, mrq) ? mrq->sbc : mrq->cmd;
2082
2083 /*
2084 * The HSQ may send a command in interrupt context without polling
2085 * the busy signaling, which means we should return BUSY if controller
2086 * has not released inhibit bits to allow HSQ trying to send request
2087 * again in non-atomic context. So we should not finish this request
2088 * here.
2089 */
2090 if (!sdhci_send_command(host, cmd))
2091 ret = -EBUSY;
2092 else
2093 sdhci_led_activate(host);
2094
2095 out_finish:
2096 spin_unlock_irqrestore(&host->lock, flags);
2097 return ret;
2098 }
2099 EXPORT_SYMBOL_GPL(sdhci_request_atomic);
2100

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

author maintainer
#5 lore raw

Re: [PATCH v5 2/3] mmc: host: sdhci: Implement the request_atomic() API

Hi,

Quoted 20 lines · kbuild test robot

Hi Baolin,

I love your patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v5.7-rc1 next-20200412]
[cannot apply to arm-soc/for-next]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Baolin-Wang/Introduce-the-request_atomic-for-the-host/20200413-105346
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 8f3d9f354286745c751374f5f1fcafee6b3f3136
config: x86_64-randconfig-s2-20200413 (attached as .config)
compiler: gcc-5 (Ubuntu 5.5.0-12ubuntu1) 5.5.0 20171010
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64
Quoted 2 lines

If you fix the issue, kindly add following tag as appropriate

This patch set is based on Adrian's patch set. Thanks.
https://www.spinics.net/lists/linux-mmc/msg58529.html

Quoted 81 lines

All error/warnings (new ones prefixed by >>):

In file included from include/linux/build_bug.h:5:0,
from include/linux/bitfield.h:10, from drivers/mmc/host/sdhci.c:12:

   drivers/mmc/host/sdhci.c: In function 'sdhci_request_atomic':
   drivers/mmc/host/sdhci.c:2076:6: error: implicit declaration of function 'sdhci_present_error' [-Werror=implicit-function-declaration]
     if (sdhci_present_error(host, mrq->cmd, true)) {
         ^
   include/linux/compiler.h:58:52: note: in definition of macro '__trace_if_var'
    #define __trace_if_var(cond) (__builtin_constant_p(cond) ? (cond) : __trace_if_value(cond))
                                                       ^
Quoted 1 line
Quoted 1 line

drivers/mmc/host/sdhci.c:2076:2: note: in expansion of macro 'if'

     if (sdhci_present_error(host, mrq->cmd, true)) {
     ^
   drivers/mmc/host/sdhci.c:2081:8: error: implicit declaration of function 'sdhci_manual_cmd23' [-Werror=implicit-function-declaration]
     cmd = sdhci_manual_cmd23(host, mrq) ? mrq->sbc : mrq->cmd;
           ^

drivers/mmc/host/sdhci.c:2090:2: error: invalid use of void expression
if (!sdhci_send_command(host, cmd))
^
drivers/mmc/host/sdhci.c:2090:2: error: invalid use of void expression In file included from include/linux/build_bug.h:5:0,
from include/linux/bitfield.h:10,
from drivers/mmc/host/sdhci.c:12:

Quoted 1 line
Quoted 1 line

include/linux/compiler.h:61:16: error: invalid use of void expression

     static struct ftrace_branch_data  \
                   ^
   include/linux/compiler.h:58:69: note: in expansion of macro '__trace_if_value'
    #define __trace_if_var(cond) (__builtin_constant_p(cond) ? (cond) : __trace_if_value(cond))
                                                                        ^
   include/linux/compiler.h:56:28: note: in expansion of macro '__trace_if_var'
    #define if(cond, ...) if ( __trace_if_var( !!(cond , ## __VA_ARGS__) ) )
                               ^

drivers/mmc/host/sdhci.c:2090:2: note: in expansion of macro 'if'
if (!sdhci_send_command(host, cmd))
^
cc1: some warnings being treated as errors

vim +/if +2076 drivers/mmc/host/sdhci.c

2066
2067 int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq) 2068 {

  2069          struct sdhci_host *host = mmc_priv(mmc);
  2070          struct mmc_command *cmd;
  2071          unsigned long flags;
  2072          int ret = 0;

2073
2074 spin_lock_irqsave(&host->lock, flags);
2075

Quoted 1 line

2076 if (sdhci_present_error(host, mrq->cmd, true)) {

2077 sdhci_finish_mrq(host, mrq);
2078 goto out_finish;
2079 }
2080
2081 cmd = sdhci_manual_cmd23(host, mrq) ? mrq->sbc : mrq->cmd;
2082
2083 /*

  2084           * The HSQ may send a command in interrupt context without polling
  2085           * the busy signaling, which means we should return BUSY if controller
  2086           * has not released inhibit bits to allow HSQ trying to send request
  2087           * again in non-atomic context. So we should not finish this request
  2088           * here.
  2089           */

2090 if (!sdhci_send_command(host, cmd))
2091 ret = -EBUSY;
2092 else
2093 sdhci_led_activate(host);
2094
2095 out_finish:
2096 spin_unlock_irqrestore(&host->lock, flags);
2097 return ret;
2098 }
2099 EXPORT_SYMBOL_GPL(sdhci_request_atomic);
2100

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/[email protected]

Signature · 1 line
Baolin Wang
maintainer Acked-by on v5 2/3
#6 lore raw

Re: [PATCH v5 2/3] mmc: host: sdhci: Implement the request_atomic() API

In reply to Baolin Wang
Quoted 9 lines · Baolin Wang

Implement the request_atomic() ops for the sdhci driver to process one request in the atomic context if the card is nonremovable.

Moreover, we should return BUSY flag if controller has not released the inhibit bits to allow HSQ trying to send request again in non-atomic context.

Quoted 63 lines
---
 drivers/mmc/host/sdhci.c | 34 ++++++++++++++++++++++++++++++++++
 drivers/mmc/host/sdhci.h |  1 +
 2 files changed, 35 insertions(+)
drivers/mmc/host/sdhci.c +34 -0
index 10b9570f48aa..0baef595de26 100644
@@ -2144,6 +2144,40 @@ void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 }
 EXPORT_SYMBOL_GPL(sdhci_request);
 
+int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct mmc_command *cmd;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (sdhci_present_error(host, mrq->cmd, true)) {
+		sdhci_finish_mrq(host, mrq);
+		goto out_finish;
+	}
+
+	cmd = sdhci_manual_cmd23(host, mrq) ? mrq->sbc : mrq->cmd;
+
+	/*
+	 * The HSQ may send a command in interrupt context without polling
+	 * the busy signaling, which means we should return BUSY if controller
+	 * has not released inhibit bits to allow HSQ trying to send request
+	 * again in non-atomic context. So we should not finish this request
+	 * here.
+	 */
+	if (!sdhci_send_command(host, cmd))
+		ret = -EBUSY;
+	else
+		sdhci_led_activate(host);
+
+out_finish:
+	spin_unlock_irqrestore(&host->lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(sdhci_request_atomic);
+
 void sdhci_set_bus_width(struct sdhci_host *host, int width)
 {
 	u8 ctrl;
drivers/mmc/host/sdhci.h +1 -0
index a7e469c00617..4bd70da7aa00 100644
@@ -776,6 +776,7 @@ void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
 void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
 			   unsigned short vdd);
 void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq);
+int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
 void sdhci_set_bus_width(struct sdhci_host *host, int width);
 void sdhci_reset(struct sdhci_host *host, u8 mask);
 void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
author maintainer
#7 lore raw

PATCH v5 3/3 mmc: host: sdhci-sprd: Implement the request_atomic() API

In reply to Baolin Wang

Implement the request_atomic() API for nonremovable cards, that means we can submit next request in the irq hard handler context to reduce latency.

Moreover factor out the AUTO CMD23 checking into a separate function to reduce duplicate code.

---
 drivers/mmc/host/sdhci-sprd.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)
drivers/mmc/host/sdhci-sprd.c +20 -3
index 2ab42c59e4f8..bc7a8cb84862 100644
@@ -406,7 +406,8 @@ static struct sdhci_ops sdhci_sprd_ops = {
 	.request_done = sdhci_sprd_request_done,
 };
 
-static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq)
+static void sdhci_sprd_check_auto_cmd23(struct mmc_host *mmc,
+					struct mmc_request *mrq)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
 	struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host);
@@ -422,10 +423,23 @@ static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	    mrq->sbc && (mrq->sbc->arg & SDHCI_SPRD_ARG2_STUFF) &&
 	    (host->flags & SDHCI_AUTO_CMD23))
 		host->flags &= ~SDHCI_AUTO_CMD23;
+}
+
+static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	sdhci_sprd_check_auto_cmd23(mmc, mrq);
 
 	sdhci_request(mmc, mrq);
 }
 
+static int sdhci_sprd_request_atomic(struct mmc_host *mmc,
+				      struct mmc_request *mrq)
+{
+	sdhci_sprd_check_auto_cmd23(mmc, mrq);
+
+	return sdhci_request_atomic(mmc, mrq);
+}
+
 static int sdhci_sprd_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
@@ -561,6 +575,11 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
 	if (ret)
 		goto pltfm_free;
 
+	if (!mmc_card_is_removable(host->mmc))
+		host->mmc_host_ops.request_atomic = sdhci_sprd_request_atomic;
+	else
+		host->always_defer_done = true;
+
 	sprd_host = TO_SPRD_HOST(host);
 	sdhci_sprd_phy_param_parse(sprd_host, pdev->dev.of_node);
 
@@ -654,8 +673,6 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_cleanup_host;
 
-	host->always_defer_done = true;
-
 	ret = __sdhci_add_host(host);
 	if (ret)
 		goto err_cleanup_host;
Signature · 1 line
2.17.1
maintainer Acked-by on v5 3/3
#8 lore raw

Re: [PATCH v5 3/3] mmc: host: sdhci-sprd: Implement the request_atomic() API

Quoted 8 lines · Baolin Wang

Implement the request_atomic() API for nonremovable cards, that means we can submit next request in the irq hard handler context to reduce latency.

Moreover factor out the AUTO CMD23 checking into a separate function to reduce duplicate code.

Quoted 64 lines
---
 drivers/mmc/host/sdhci-sprd.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)
drivers/mmc/host/sdhci-sprd.c +20 -3
index 2ab42c59e4f8..bc7a8cb84862 100644
@@ -406,7 +406,8 @@ static struct sdhci_ops sdhci_sprd_ops = {
 	.request_done = sdhci_sprd_request_done,
 };
 
-static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq)
+static void sdhci_sprd_check_auto_cmd23(struct mmc_host *mmc,
+					struct mmc_request *mrq)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
 	struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host);
@@ -422,10 +423,23 @@ static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	    mrq->sbc && (mrq->sbc->arg & SDHCI_SPRD_ARG2_STUFF) &&
 	    (host->flags & SDHCI_AUTO_CMD23))
 		host->flags &= ~SDHCI_AUTO_CMD23;
+}
+
+static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	sdhci_sprd_check_auto_cmd23(mmc, mrq);
 
 	sdhci_request(mmc, mrq);
 }
 
+static int sdhci_sprd_request_atomic(struct mmc_host *mmc,
+				      struct mmc_request *mrq)
+{
+	sdhci_sprd_check_auto_cmd23(mmc, mrq);
+
+	return sdhci_request_atomic(mmc, mrq);
+}
+
 static int sdhci_sprd_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
@@ -561,6 +575,11 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
 	if (ret)
 		goto pltfm_free;
 
+	if (!mmc_card_is_removable(host->mmc))
+		host->mmc_host_ops.request_atomic = sdhci_sprd_request_atomic;
+	else
+		host->always_defer_done = true;
+
 	sprd_host = TO_SPRD_HOST(host);
 	sdhci_sprd_phy_param_parse(sprd_host, pdev->dev.of_node);
 
@@ -654,8 +673,6 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_cleanup_host;
 
-	host->always_defer_done = true;
-
 	ret = __sdhci_add_host(host);
 	if (ret)
 		goto err_cleanup_host;
#9 lore raw
In reply to Baolin Wang
Quoted 44 lines · Baolin Wang

This patch set introduces a new request_atomic() interface for the MMC host controller, which is used to submit a request to host in the atomic context, such as in the irq hard handler, to reduce the request latency.

Note, this patch set is based on Adrian's patch set:
https://www.spinics.net/lists/linux-mmc/msg58529.html

Any comments are welcome. Thanks.

Changes from v4:
- Remove redundant checking when warning the return value of request_atomic().
- Add acked tag from Adrian for patch 1.
- Re-implement the request_atomic() based on the Adrian's patch set.

Changes from v3:
- Move patch 3 of V3 patch set into patch 1.
- Add a warning for unexpected return value of request_atomic().
- Remove redundant checking of ops->request().

Changes from v2:
- Return busy flag if encountering unusual card busy state instead of polling in interrupt context.
- Add a work for HSQ to try again in non-atomic context if the host returns busy flag.

Changes from v1:
- Re-split the changes to make them more clear suggested by Ulf.
- Factor out the auto CMD23 checking into a separate function.

Baolin Wang (3):
mmc: host: Introduce the request_atomic() for the host
mmc: host: sdhci: Implement the request_atomic() API
mmc: host: sdhci-sprd: Implement the request_atomic() API

 drivers/mmc/host/mmc_hsq.c    | 29 ++++++++++++++++++++++++++++-
 drivers/mmc/host/mmc_hsq.h    |  1 +
 drivers/mmc/host/sdhci-sprd.c | 23 ++++++++++++++++++++---
 drivers/mmc/host/sdhci.c      | 34 ++++++++++++++++++++++++++++++++++
 drivers/mmc/host/sdhci.h      |  1 +
 include/linux/mmc/host.h      |  3 +++
 6 files changed, 87 insertions(+), 4 deletions(-)
Quoted 3 lines

--
2.17.1

Applied for next, thanks!

Kind regards
Uffe