Skip to contentSkip to conversation

Set flow_label and RoCEv2 UDP source port for datagram QP

PATCH Superseded Leon Romanovsky 3 participants 10 messages Apr 13, 2020 – Apr 19, 2020

Subsystems (5)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover Set flow_label and RoCEv2 UDP source port for datagram QP

From: Leon Romanovsky <[email protected]>

Changelog:
v2: Dropped patch "RDMA/cm: Set flow label of recv_wc based on primary flow label", because it violates IBTA 13.5.4.3/13.5.4.4 sections.
v1: Added extra patch to reduce amount of kzalloc/kfree calls in the HCA set capability flow.
https://lore.kernel.org/lkml/[email protected]
v0: https://lore.kernel.org/linux-rdma/[email protected]
--------------------------------

From Mark:

This series provide flow label and UDP source port definition in RoCE v2. Those fields are used to create entropy for network routes (ECMP), load balancers and 802.3ad link aggregation switching that are not aware of RoCE headers.

Thanks.

Leon Romanovsky (1):
net/mlx5: Refactor HCA capability set flow

Mark Zhang (5):
net/mlx5: Enable SW-defined RoCEv2 UDP source port RDMA/core: Add hash functions to calculate RoCEv2 flowlabel and UDP
source port
RDMA/mlx5: Define RoCEv2 udp source port when set path RDMA/cma: Initialize the flow label of CM's route path record RDMA/mlx5: Set UDP source port based on the grh.flow_label

 drivers/infiniband/core/cma.c                 | 23 +++++
 drivers/infiniband/hw/mlx5/ah.c               | 21 +++-
 drivers/infiniband/hw/mlx5/main.c             |  4 +-
 drivers/infiniband/hw/mlx5/mlx5_ib.h          |  4 +-
 drivers/infiniband/hw/mlx5/qp.c               | 30 ++++--
 .../net/ethernet/mellanox/mlx5/core/main.c    | 96 +++++++++++--------
 include/linux/mlx5/mlx5_ifc.h                 |  5 +-
 include/rdma/ib_verbs.h                       | 44 +++++++++
 8 files changed, 173 insertions(+), 54 deletions(-)

--
2.25.2

#1 lore raw

PATCH v2 1/6 net/mlx5: Refactor HCA capability set flow

From: Leon Romanovsky <[email protected]>

Reduce the amount of kzalloc/kfree cycles by allocating command structure in the parent function and leverage the knowledge that set_caps() is called for HCA capabilities only with specific HW structure as parameter to calculate mailbox size.

---
 .../net/ethernet/mellanox/mlx5/core/main.c    | 66 +++++++------------
 1 file changed, 24 insertions(+), 42 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/main.c +24 -42
index 7af4210c1b96..8b9182add689 100644
@@ -407,20 +407,19 @@ int mlx5_core_get_caps(struct mlx5_core_dev *dev, enum mlx5_cap_type cap_type)
 	return mlx5_core_get_caps_mode(dev, cap_type, HCA_CAP_OPMOD_GET_MAX);
 }
 
-static int set_caps(struct mlx5_core_dev *dev, void *in, int in_sz, int opmod)
+static int set_caps(struct mlx5_core_dev *dev, void *in, int opmod)
 {
-	u32 out[MLX5_ST_SZ_DW(set_hca_cap_out)] = {0};
+	u32 out[MLX5_ST_SZ_DW(set_hca_cap_out)] = {};
 
 	MLX5_SET(set_hca_cap_in, in, opcode, MLX5_CMD_OP_SET_HCA_CAP);
 	MLX5_SET(set_hca_cap_in, in, op_mod, opmod << 1);
-	return mlx5_cmd_exec(dev, in, in_sz, out, sizeof(out));
+	return mlx5_cmd_exec(dev, in, MLX5_ST_SZ_BYTES(set_hca_cap_in), out,
+			     sizeof(out));
 }
 
-static int handle_hca_cap_atomic(struct mlx5_core_dev *dev)
+static int handle_hca_cap_atomic(struct mlx5_core_dev *dev, void *set_ctx)
 {
-	void *set_ctx;
 	void *set_hca_cap;
-	int set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
 	int req_endianness;
 	int err;
 
@@ -439,27 +438,19 @@ static int handle_hca_cap_atomic(struct mlx5_core_dev *dev)
 	if (req_endianness != MLX5_ATOMIC_REQ_MODE_HOST_ENDIANNESS)
 		return 0;
 
-	set_ctx = kzalloc(set_sz, GFP_KERNEL);
-	if (!set_ctx)
-		return -ENOMEM;
-
 	set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx, capability);
 
 	/* Set requestor to host endianness */
 	MLX5_SET(atomic_caps, set_hca_cap, atomic_req_8B_endianness_mode,
 		 MLX5_ATOMIC_REQ_MODE_HOST_ENDIANNESS);
 
-	err = set_caps(dev, set_ctx, set_sz, MLX5_SET_HCA_CAP_OP_MOD_ATOMIC);
-
-	kfree(set_ctx);
+	err = set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_ATOMIC);
 	return err;
 }
 
-static int handle_hca_cap_odp(struct mlx5_core_dev *dev)
+static int handle_hca_cap_odp(struct mlx5_core_dev *dev, void *set_ctx)
 {
 	void *set_hca_cap;
-	void *set_ctx;
-	int set_sz;
 	bool do_set = false;
 	int err;
 
@@ -471,11 +462,6 @@ static int handle_hca_cap_odp(struct mlx5_core_dev *dev)
 	if (err)
 		return err;
 
-	set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
-	set_ctx = kzalloc(set_sz, GFP_KERNEL);
-	if (!set_ctx)
-		return -ENOMEM;
-
 	set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx, capability);
 	memcpy(set_hca_cap, dev->caps.hca_cur[MLX5_CAP_ODP],
 	       MLX5_ST_SZ_BYTES(odp_cap));
@@ -505,29 +491,20 @@ static int handle_hca_cap_odp(struct mlx5_core_dev *dev)
 	ODP_CAP_SET_MAX(dev, dc_odp_caps.atomic);
 
 	if (do_set)
-		err = set_caps(dev, set_ctx, set_sz,
-			       MLX5_SET_HCA_CAP_OP_MOD_ODP);
-
-	kfree(set_ctx);
+		err = set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_ODP);
 
 	return err;
 }
 
-static int handle_hca_cap(struct mlx5_core_dev *dev)
+static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)
 {
-	void *set_ctx = NULL;
 	struct mlx5_profile *prof = dev->profile;
-	int err = -ENOMEM;
-	int set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
 	void *set_hca_cap;
-
-	set_ctx = kzalloc(set_sz, GFP_KERNEL);
-	if (!set_ctx)
-		goto query_ex;
+	int err;
 
 	err = mlx5_core_get_caps(dev, MLX5_CAP_GENERAL);
 	if (err)
-		goto query_ex;
+		return err;
 
 	set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx,
 				   capability);
@@ -578,37 +555,42 @@ static int handle_hca_cap(struct mlx5_core_dev *dev)
 			 num_vhca_ports,
 			 MLX5_CAP_GEN_MAX(dev, num_vhca_ports));
 
-	err = set_caps(dev, set_ctx, set_sz,
-		       MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE);
-
-query_ex:
-	kfree(set_ctx);
+	err = set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE);
 	return err;
 }
 
 static int set_hca_cap(struct mlx5_core_dev *dev)
 {
+	int set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
+	void *set_ctx;
 	int err;
 
-	err = handle_hca_cap(dev);
+	set_ctx = kzalloc(set_sz, GFP_KERNEL);
+	if (!set_ctx)
+		return -ENOMEM;
+
+	err = handle_hca_cap(dev, set_ctx);
 	if (err) {
 		mlx5_core_err(dev, "handle_hca_cap failed\n");
 		goto out;
 	}
 
-	err = handle_hca_cap_atomic(dev);
+	memset(set_ctx, 0, set_sz);
+	err = handle_hca_cap_atomic(dev, set_ctx);
 	if (err) {
 		mlx5_core_err(dev, "handle_hca_cap_atomic failed\n");
 		goto out;
 	}
 
-	err = handle_hca_cap_odp(dev);
+	memset(set_ctx, 0, set_sz);
+	err = handle_hca_cap_odp(dev, set_ctx);
 	if (err) {
 		mlx5_core_err(dev, "handle_hca_cap_odp failed\n");
 		goto out;
 	}
 
 out:
+	kfree(set_ctx);
 	return err;
 }
 
Signature · 1 line
2.25.2
Acked-by on v2 1/6
#2 lore raw

Re: [PATCH mlx5-next v2 1/6] net/mlx5: Refactor HCA capability set flow

Quoted 100 lines · Leon Romanovsky

From: Leon Romanovsky <[email protected]>

Reduce the amount of kzalloc/kfree cycles by allocating command structure in the parent function and leverage the knowledge that set_caps() is called for HCA capabilities only with specific HW structure as parameter to calculate mailbox size.

---
 .../net/ethernet/mellanox/mlx5/core/main.c    | 66 +++++++--------
----
 1 file changed, 24 insertions(+), 42 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/main.c +7 -21
index 7af4210c1b96..8b9182add689 100644
@@ -407,20 +407,19 @@ int mlx5_core_get_caps(struct mlx5_core_dev
 *dev, enum mlx5_cap_type cap_type)
 	return mlx5_core_get_caps_mode(dev, cap_type,
 HCA_CAP_OPMOD_GET_MAX);
 }
 
-static int set_caps(struct mlx5_core_dev *dev, void *in, int in_sz,
 int opmod)
+static int set_caps(struct mlx5_core_dev *dev, void *in, int opmod)
 {
-	u32 out[MLX5_ST_SZ_DW(set_hca_cap_out)] = {0};
+	u32 out[MLX5_ST_SZ_DW(set_hca_cap_out)] = {};
 
 	MLX5_SET(set_hca_cap_in, in, opcode, MLX5_CMD_OP_SET_HCA_CAP);
 	MLX5_SET(set_hca_cap_in, in, op_mod, opmod << 1);
-	return mlx5_cmd_exec(dev, in, in_sz, out, sizeof(out));
+	return mlx5_cmd_exec(dev, in, MLX5_ST_SZ_BYTES(set_hca_cap_in),
 out,
+			     sizeof(out));
 }
 
-static int handle_hca_cap_atomic(struct mlx5_core_dev *dev)
+static int handle_hca_cap_atomic(struct mlx5_core_dev *dev, void
 *set_ctx)
 {
-	void *set_ctx;
 	void *set_hca_cap;
-	int set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
 	int req_endianness;
 	int err;
@@ -439,27 +438,19 @@ static int handle_hca_cap_atomic(struct
 mlx5_core_dev *dev)
 	if (req_endianness != MLX5_ATOMIC_REQ_MODE_HOST_ENDIANNESS)
 		return 0;
 
-	set_ctx = kzalloc(set_sz, GFP_KERNEL);
-	if (!set_ctx)
-		return -ENOMEM;
-
 	set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx,
 capability);
 
 	/* Set requestor to host endianness */
 	MLX5_SET(atomic_caps, set_hca_cap,
 atomic_req_8B_endianness_mode,
 		 MLX5_ATOMIC_REQ_MODE_HOST_ENDIANNESS);
 
-	err = set_caps(dev, set_ctx, set_sz,
 MLX5_SET_HCA_CAP_OP_MOD_ATOMIC);
-
-	kfree(set_ctx);
+	err = set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_ATOMIC);
 	return err;
 }
 
-static int handle_hca_cap_odp(struct mlx5_core_dev *dev)
+static int handle_hca_cap_odp(struct mlx5_core_dev *dev, void
 *set_ctx)
 {
 	void *set_hca_cap;
-	void *set_ctx;
-	int set_sz;
 	bool do_set = false;
 	int err;
@@ -471,11 +462,6 @@ static int handle_hca_cap_odp(struct
 mlx5_core_dev *dev)
 	if (err)
 		return err;
 
-	set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
-	set_ctx = kzalloc(set_sz, GFP_KERNEL);
-	if (!set_ctx)
-		return -ENOMEM;
-
 	set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx,
 capability);
drivers/net/ethernet/mellanox/mlx5/core/main.c +0 -0
 	memcpy(set_hca_cap, dev->caps.hca_cur[MLX5_CAP_ODP],
 	       MLX5_ST_SZ_BYTES(odp_cap));

drivers/net/ethernet/mellanox/mlx5/core/main.c static int handle_hca_cap_odp(struct · line 494

Quoted 4 lines
drivers/net/ethernet/mellanox/mlx5/core/main.c +0 -0
@@ -505,29 +491,20 @@ static int handle_hca_cap_odp(struct
 mlx5_core_dev *dev)
 	ODP_CAP_SET_MAX(dev, dc_odp_caps.atomic);
 
 	if (do_set)

assigning to err is now redundant in all of the functions and the next patch.

you can do early exits when required and then just "return set_caps();"

in this example:

       if (!do_set)
           return 0;
       
       return set_caps(...);
Quoted 34 lines
drivers/net/ethernet/mellanox/mlx5/core/main.c +4 -13
-		err = set_caps(dev, set_ctx, set_sz,
-			       MLX5_SET_HCA_CAP_OP_MOD_ODP);
-
-	kfree(set_ctx);
+		err = set_caps(dev, set_ctx,
 MLX5_SET_HCA_CAP_OP_MOD_ODP);
 
 	return err;
 }
 
-static int handle_hca_cap(struct mlx5_core_dev *dev)
+static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)
 {
-	void *set_ctx = NULL;
 	struct mlx5_profile *prof = dev->profile;
-	int err = -ENOMEM;
-	int set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
 	void *set_hca_cap;
-
-	set_ctx = kzalloc(set_sz, GFP_KERNEL);
-	if (!set_ctx)
-		goto query_ex;
+	int err;
 
 	err = mlx5_core_get_caps(dev, MLX5_CAP_GENERAL);
 	if (err)
-		goto query_ex;
+		return err;
 
drivers/net/ethernet/mellanox/mlx5/core/main.c +0 -0
 	set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx,
 				   capability);
@@ -578,37 +555,42 @@ static int handle_hca_cap(struct mlx5_core_dev
 *dev)
 			 num_vhca_ports,

drivers/net/ethernet/mellanox/mlx5/core/main.c static int handle_hca_cap(struct mlx5_core_dev · line 561

Quoted 10 lines
drivers/net/ethernet/mellanox/mlx5/core/main.c +1 -5
 			 MLX5_CAP_GEN_MAX(dev, num_vhca_ports));
 
-	err = set_caps(dev, set_ctx, set_sz,
-		       MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE);
-
-query_ex:
-	kfree(set_ctx);
+	err = set_caps(dev, set_ctx,
 MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE);
 	return err;

just return set_caps();

other than this the series is ok,

Quoted 40 lines
drivers/net/ethernet/mellanox/mlx5/core/main.c +12 -3
 }
 
 static int set_hca_cap(struct mlx5_core_dev *dev)
 {
+	int set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
+	void *set_ctx;
 	int err;
 
-	err = handle_hca_cap(dev);
+	set_ctx = kzalloc(set_sz, GFP_KERNEL);
+	if (!set_ctx)
+		return -ENOMEM;
+
+	err = handle_hca_cap(dev, set_ctx);
 	if (err) {
 		mlx5_core_err(dev, "handle_hca_cap failed\n");
 		goto out;
 	}
 
-	err = handle_hca_cap_atomic(dev);
+	memset(set_ctx, 0, set_sz);
+	err = handle_hca_cap_atomic(dev, set_ctx);
 	if (err) {
 		mlx5_core_err(dev, "handle_hca_cap_atomic failed\n");
 		goto out;
 	}
 
-	err = handle_hca_cap_odp(dev);
+	memset(set_ctx, 0, set_sz);
+	err = handle_hca_cap_odp(dev, set_ctx);
 	if (err) {
 		mlx5_core_err(dev, "handle_hca_cap_odp failed\n");
 		goto out;
 	}
 
 out:
+	kfree(set_ctx);
 	return err;

}

#3 lore raw

Re: [PATCH mlx5-next v2 1/6] net/mlx5: Refactor HCA capability set flow

Quoted 167 lines · Saeed Mahameed
Quoted 100 lines · Leon Romanovsky

From: Leon Romanovsky <[email protected]>

Reduce the amount of kzalloc/kfree cycles by allocating command structure in the parent function and leverage the knowledge that set_caps() is called for HCA capabilities only with specific HW structure as parameter to calculate mailbox size.

---
 .../net/ethernet/mellanox/mlx5/core/main.c    | 66 +++++++--------
----
 1 file changed, 24 insertions(+), 42 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/main.c +7 -21
index 7af4210c1b96..8b9182add689 100644
@@ -407,20 +407,19 @@ int mlx5_core_get_caps(struct mlx5_core_dev
 *dev, enum mlx5_cap_type cap_type)
 	return mlx5_core_get_caps_mode(dev, cap_type,
 HCA_CAP_OPMOD_GET_MAX);
 }
 
-static int set_caps(struct mlx5_core_dev *dev, void *in, int in_sz,
 int opmod)
+static int set_caps(struct mlx5_core_dev *dev, void *in, int opmod)
 {
-	u32 out[MLX5_ST_SZ_DW(set_hca_cap_out)] = {0};
+	u32 out[MLX5_ST_SZ_DW(set_hca_cap_out)] = {};
 
 	MLX5_SET(set_hca_cap_in, in, opcode, MLX5_CMD_OP_SET_HCA_CAP);
 	MLX5_SET(set_hca_cap_in, in, op_mod, opmod << 1);
-	return mlx5_cmd_exec(dev, in, in_sz, out, sizeof(out));
+	return mlx5_cmd_exec(dev, in, MLX5_ST_SZ_BYTES(set_hca_cap_in),
 out,
+			     sizeof(out));
 }
 
-static int handle_hca_cap_atomic(struct mlx5_core_dev *dev)
+static int handle_hca_cap_atomic(struct mlx5_core_dev *dev, void
 *set_ctx)
 {
-	void *set_ctx;
 	void *set_hca_cap;
-	int set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
 	int req_endianness;
 	int err;
@@ -439,27 +438,19 @@ static int handle_hca_cap_atomic(struct
 mlx5_core_dev *dev)
 	if (req_endianness != MLX5_ATOMIC_REQ_MODE_HOST_ENDIANNESS)
 		return 0;
 
-	set_ctx = kzalloc(set_sz, GFP_KERNEL);
-	if (!set_ctx)
-		return -ENOMEM;
-
 	set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx,
 capability);
 
 	/* Set requestor to host endianness */
 	MLX5_SET(atomic_caps, set_hca_cap,
 atomic_req_8B_endianness_mode,
 		 MLX5_ATOMIC_REQ_MODE_HOST_ENDIANNESS);
 
-	err = set_caps(dev, set_ctx, set_sz,
 MLX5_SET_HCA_CAP_OP_MOD_ATOMIC);
-
-	kfree(set_ctx);
+	err = set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_ATOMIC);
 	return err;
 }
 
-static int handle_hca_cap_odp(struct mlx5_core_dev *dev)
+static int handle_hca_cap_odp(struct mlx5_core_dev *dev, void
 *set_ctx)
 {
 	void *set_hca_cap;
-	void *set_ctx;
-	int set_sz;
 	bool do_set = false;
 	int err;
@@ -471,11 +462,6 @@ static int handle_hca_cap_odp(struct
 mlx5_core_dev *dev)
 	if (err)
 		return err;
 
-	set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
-	set_ctx = kzalloc(set_sz, GFP_KERNEL);
-	if (!set_ctx)
-		return -ENOMEM;
-
 	set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx,
 capability);
drivers/net/ethernet/mellanox/mlx5/core/main.c +0 -0
 	memcpy(set_hca_cap, dev->caps.hca_cur[MLX5_CAP_ODP],
 	       MLX5_ST_SZ_BYTES(odp_cap));

drivers/net/ethernet/mellanox/mlx5/core/main.c static int handle_hca_cap_odp(struct · line 494

Quoted 4 lines
drivers/net/ethernet/mellanox/mlx5/core/main.c +0 -0
@@ -505,29 +491,20 @@ static int handle_hca_cap_odp(struct
 mlx5_core_dev *dev)
 	ODP_CAP_SET_MAX(dev, dc_odp_caps.atomic);
 
 	if (do_set)

assigning to err is now redundant in all of the functions and the next patch.

you can do early exits when required and then just "return set_caps();"

in this example:

       if (!do_set)
           return 0;

       return set_caps(...);
Quoted 34 lines
drivers/net/ethernet/mellanox/mlx5/core/main.c +4 -13
-		err = set_caps(dev, set_ctx, set_sz,
-			       MLX5_SET_HCA_CAP_OP_MOD_ODP);
-
-	kfree(set_ctx);
+		err = set_caps(dev, set_ctx,
 MLX5_SET_HCA_CAP_OP_MOD_ODP);
 
 	return err;
 }
 
-static int handle_hca_cap(struct mlx5_core_dev *dev)
+static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)
 {
-	void *set_ctx = NULL;
 	struct mlx5_profile *prof = dev->profile;
-	int err = -ENOMEM;
-	int set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
 	void *set_hca_cap;
-
-	set_ctx = kzalloc(set_sz, GFP_KERNEL);
-	if (!set_ctx)
-		goto query_ex;
+	int err;
 
 	err = mlx5_core_get_caps(dev, MLX5_CAP_GENERAL);
 	if (err)
-		goto query_ex;
+		return err;
 
drivers/net/ethernet/mellanox/mlx5/core/main.c +0 -0
 	set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx,
 				   capability);
@@ -578,37 +555,42 @@ static int handle_hca_cap(struct mlx5_core_dev
 *dev)
 			 num_vhca_ports,

drivers/net/ethernet/mellanox/mlx5/core/main.c static int handle_hca_cap(struct mlx5_core_dev · line 561

Quoted 10 lines
drivers/net/ethernet/mellanox/mlx5/core/main.c +1 -5
 			 MLX5_CAP_GEN_MAX(dev, num_vhca_ports));
 
-	err = set_caps(dev, set_ctx, set_sz,
-		       MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE);
-
-query_ex:
-	kfree(set_ctx);
+	err = set_caps(dev, set_ctx,
 MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE);
 	return err;

just return set_caps();

Quoted 3 lines

other than this the series is ok,

Thanks, I'll fix while will take to mlx5-next.

#4 lore raw

PATCH v2 2/6 net/mlx5: Enable SW-defined RoCEv2 UDP source port

In reply to Leon Romanovsky

From: Mark Zhang <[email protected]>

When this is enabled, UDP source port for RoCEv2 packets are defined by software instead of firmware.

---
 .../net/ethernet/mellanox/mlx5/core/main.c    | 32 +++++++++++++++++++
 include/linux/mlx5/mlx5_ifc.h                 |  5 ++-
 2 files changed, 36 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/main.c +32 -0
index 8b9182add689..bbe1a2110204 100644
@@ -559,6 +559,31 @@ static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)
 	return err;
 }
 
+static int handle_hca_cap_roce(struct mlx5_core_dev *dev, void *set_ctx)
+{
+	void *set_hca_cap;
+	int err;
+
+	if (!MLX5_CAP_GEN(dev, roce))
+		return 0;
+
+	err = mlx5_core_get_caps(dev, MLX5_CAP_ROCE);
+	if (err)
+		return err;
+
+	if (MLX5_CAP_ROCE(dev, sw_r_roce_src_udp_port) ||
+	    !MLX5_CAP_ROCE_MAX(dev, sw_r_roce_src_udp_port))
+		return 0;
+
+	set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx, capability);
+	memcpy(set_hca_cap, dev->caps.hca_cur[MLX5_CAP_ROCE],
+	       MLX5_ST_SZ_BYTES(roce_cap));
+	MLX5_SET(roce_cap, set_hca_cap, sw_r_roce_src_udp_port, 1);
+
+	err = set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_ROCE);
+	return err;
+}
+
 static int set_hca_cap(struct mlx5_core_dev *dev)
 {
 	int set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
@@ -589,6 +614,13 @@ static int set_hca_cap(struct mlx5_core_dev *dev)
 		goto out;
 	}
 
+	memset(set_ctx, 0, set_sz);
+	err = handle_hca_cap_roce(dev, set_ctx);
+	if (err) {
+		mlx5_core_err(dev, "handle_hca_cap_roce failed\n");
+		goto out;
+	}
+
 out:
 	kfree(set_ctx);
 	return err;
include/linux/mlx5/mlx5_ifc.h +4 -1
index a3b6c92e889e..95dd9cc1d979 100644
@@ -74,6 +74,7 @@ enum {
 	MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE        = 0x0,
 	MLX5_SET_HCA_CAP_OP_MOD_ODP                   = 0x2,
 	MLX5_SET_HCA_CAP_OP_MOD_ATOMIC                = 0x3,
+	MLX5_SET_HCA_CAP_OP_MOD_ROCE                  = 0x4,
 };
 
 enum {
@@ -903,7 +904,9 @@ struct mlx5_ifc_per_protocol_networking_offload_caps_bits {
 
 struct mlx5_ifc_roce_cap_bits {
 	u8         roce_apm[0x1];
-	u8         reserved_at_1[0x1f];
+	u8         reserved_at_1[0x3];
+	u8         sw_r_roce_src_udp_port[0x1];
+	u8         reserved_at_5[0x1b];
 
 	u8         reserved_at_20[0x60];
 
Signature · 1 line
2.25.2
#5 lore raw

PATCH v2 3/6 RDMA/core: Add hash functions to calculate RoCEv2 flowlabel and UDP source port

In reply to Leon Romanovsky

From: Mark Zhang <[email protected]>

Add two hash functions to distribute RoCE v2 UDP source and Flowlabel symmetrically. These are user visible API and any change in the implementation needs to be tested for inter-operability between old and new variant.

---
 include/rdma/ib_verbs.h | 44 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)
include/rdma/ib_verbs.h +44 -0
index 60f9969b6d83..8763d4a06eb7 100644
@@ -4703,4 +4703,48 @@ static inline struct ib_device *rdma_device_to_ibdev(struct device *device)
 
 bool rdma_dev_access_netns(const struct ib_device *device,
 			   const struct net *net);
+
+#define IB_ROCE_UDP_ENCAP_VALID_PORT_MIN (0xC000)
+#define IB_GRH_FLOWLABEL_MASK (0x000FFFFF)
+
+/**
+ * rdma_flow_label_to_udp_sport - generate a RoCE v2 UDP src port value based
+ *                               on the flow_label
+ *
+ * This function will convert the 20 bit flow_label input to a valid RoCE v2
+ * UDP src port 14 bit value. All RoCE V2 drivers should use this same
+ * convention.
+ */
+static inline u16 rdma_flow_label_to_udp_sport(u32 fl)
+{
+	u32 fl_low = fl & 0x03fff, fl_high = fl & 0xFC000;
+
+	fl_low ^= fl_high >> 14;
+	return (u16)(fl_low | IB_ROCE_UDP_ENCAP_VALID_PORT_MIN);
+}
+
+/**
+ * rdma_calc_flow_label - generate a RDMA symmetric flow label value based on
+ *                        local and remote qpn values
+ *
+ * This function folded the multiplication results of two qpns, 24 bit each,
+ * fields, and converts it to a 20 bit results.
+ *
+ * This function will create symmetric flow_label value based on the local
+ * and remote qpn values. this will allow both the requester and responder
+ * to calculate the same flow_label for a given connection.
+ *
+ * This helper function should be used by driver in case the upper layer
+ * provide a zero flow_label value. This is to improve entropy of RDMA
+ * traffic in the network.
+ */
+static inline u32 rdma_calc_flow_label(u32 lqpn, u32 rqpn)
+{
+	u64 v = (u64)lqpn * rqpn;
+
+	v ^= v >> 20;
+	v ^= v >> 40;
+
+	return (u32)(v & IB_GRH_FLOWLABEL_MASK);
+}
 #endif /* IB_VERBS_H */
Signature · 1 line
2.25.2
#6 lore raw

PATCH v2 4/6 RDMA/mlx5: Define RoCEv2 udp source port when set path

In reply to Leon Romanovsky

From: Mark Zhang <[email protected]>

Calculate and set UDP source port based on the flow label. If flow label is not defined in GRH then calculate it based on lqpn/rqpn.

---
 drivers/infiniband/hw/mlx5/qp.c | 30 ++++++++++++++++++++++++------
 1 file changed, 24 insertions(+), 6 deletions(-)
drivers/infiniband/hw/mlx5/qp.c +24 -6
index 9e9ad69152f7..e7083ab3bcd2 100644
@@ -2967,6 +2967,21 @@ static int modify_raw_packet_tx_affinity(struct mlx5_core_dev *dev,
 	return err;
 }
 
+static void mlx5_set_path_udp_sport(struct mlx5_qp_path *path,
+				    const struct rdma_ah_attr *ah,
+				    u32 lqpn, u32 rqpn)
+
+{
+	u32 fl = ah->grh.flow_label;
+	u16 sport;
+
+	if (!fl)
+		fl = rdma_calc_flow_label(lqpn, rqpn);
+
+	sport = rdma_flow_label_to_udp_sport(fl);
+	path->udp_sport = cpu_to_be16(sport);
+}
+
 static int mlx5_set_path(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
 			 const struct rdma_ah_attr *ah,
 			 struct mlx5_qp_path *path, u8 port, int attr_mask,
@@ -2998,12 +3013,15 @@ static int mlx5_set_path(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
 			return -EINVAL;
 
 		memcpy(path->rmac, ah->roce.dmac, sizeof(ah->roce.dmac));
-		if (qp->ibqp.qp_type == IB_QPT_RC ||
-		    qp->ibqp.qp_type == IB_QPT_UC ||
-		    qp->ibqp.qp_type == IB_QPT_XRC_INI ||
-		    qp->ibqp.qp_type == IB_QPT_XRC_TGT)
-			path->udp_sport =
-				mlx5_get_roce_udp_sport(dev, ah->grh.sgid_attr);
+		if ((qp->ibqp.qp_type == IB_QPT_RC ||
+		     qp->ibqp.qp_type == IB_QPT_UC ||
+		     qp->ibqp.qp_type == IB_QPT_XRC_INI ||
+		     qp->ibqp.qp_type == IB_QPT_XRC_TGT) &&
+		    (grh->sgid_attr->gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP) &&
+		    (attr_mask & IB_QP_DEST_QPN))
+			mlx5_set_path_udp_sport(path, ah,
+						qp->ibqp.qp_num,
+						attr->dest_qp_num);
 		path->dci_cfi_prio_sl = (sl & 0x7) << 4;
 		gid_type = ah->grh.sgid_attr->gid_type;
 		if (gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP)
Signature · 1 line
2.25.2
#7 lore raw

PATCH v2 5/6 RDMA/cma: Initialize the flow label of CM's route path record

In reply to Leon Romanovsky

From: Mark Zhang <[email protected]>

If flow label is not set by the user or it's not IPv4, initialize it with the cma src/dst based on the "Kernighan and Ritchie's hash function".

---
 drivers/infiniband/core/cma.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
drivers/infiniband/core/cma.c +23 -0
index 26e6f7df247b..bc66a0d39068 100644
@@ -2904,6 +2904,24 @@ static int iboe_tos_to_sl(struct net_device *ndev, int tos)
 		return 0;
 }
 
+static __be32 cma_get_roce_udp_flow_label(struct rdma_id_private *id_priv)
+{
+	struct sockaddr_in6 *addr6;
+	u16 dport, sport;
+	u32 hash, fl;
+
+	addr6 = (struct sockaddr_in6 *)cma_src_addr(id_priv);
+	fl = be32_to_cpu(addr6->sin6_flowinfo) & IB_GRH_FLOWLABEL_MASK;
+	if ((cma_family(id_priv) != AF_INET6) || !fl) {
+		dport = be16_to_cpu(cma_port(cma_dst_addr(id_priv)));
+		sport = be16_to_cpu(cma_port(cma_src_addr(id_priv)));
+		hash = (u32)sport * 31 + dport;
+		fl = hash & IB_GRH_FLOWLABEL_MASK;
+	}
+
+	return cpu_to_be32(fl);
+}
+
 static int cma_resolve_iboe_route(struct rdma_id_private *id_priv)
 {
 	struct rdma_route *route = &id_priv->id.route;
@@ -2970,6 +2988,11 @@ static int cma_resolve_iboe_route(struct rdma_id_private *id_priv)
 		goto err2;
 	}
 
+	if (rdma_protocol_roce_udp_encap(id_priv->id.device,
+					 id_priv->id.port_num))
+		route->path_rec->flow_label =
+			cma_get_roce_udp_flow_label(id_priv);
+
 	cma_init_resolve_route_work(work, id_priv);
 	queue_work(cma_wq, &work->work);
 
Signature · 1 line
2.25.2
#8 lore raw

PATCH v2 6/6 RDMA/mlx5: Set UDP source port based on the grh.flow_label

In reply to Leon Romanovsky

From: Mark Zhang <[email protected]>

Calculate UDP source port based on the grh.flow_label. If grh.flow_label is not valid, we will use minimal supported UDP source port.

---
 drivers/infiniband/hw/mlx5/ah.c      | 21 +++++++++++++++++++--
 drivers/infiniband/hw/mlx5/main.c    |  4 ++--
 drivers/infiniband/hw/mlx5/mlx5_ib.h |  4 ++--
 3 files changed, 23 insertions(+), 6 deletions(-)
drivers/infiniband/hw/mlx5/ah.c +19 -2
index 14ad05e7c5bf..5acf1bfb73fe 100644
@@ -32,6 +32,24 @@
 
 #include "mlx5_ib.h"
 
+static __be16 mlx5_ah_get_udp_sport(const struct mlx5_ib_dev *dev,
+				  const struct rdma_ah_attr *ah_attr)
+{
+	enum ib_gid_type gid_type = ah_attr->grh.sgid_attr->gid_type;
+	__be16 sport;
+
+	if ((gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP) &&
+	    (rdma_ah_get_ah_flags(ah_attr) & IB_AH_GRH) &&
+	    (ah_attr->grh.flow_label & IB_GRH_FLOWLABEL_MASK))
+		sport = cpu_to_be16(
+			rdma_flow_label_to_udp_sport(ah_attr->grh.flow_label));
+	else
+		sport = mlx5_get_roce_udp_sport_min(dev,
+						    ah_attr->grh.sgid_attr);
+
+	return sport;
+}
+
 static void create_ib_ah(struct mlx5_ib_dev *dev, struct mlx5_ib_ah *ah,
 			 struct rdma_ah_attr *ah_attr)
 {
@@ -59,8 +77,7 @@ static void create_ib_ah(struct mlx5_ib_dev *dev, struct mlx5_ib_ah *ah,
 
 		memcpy(ah->av.rmac, ah_attr->roce.dmac,
 		       sizeof(ah_attr->roce.dmac));
-		ah->av.udp_sport =
-			mlx5_get_roce_udp_sport(dev, ah_attr->grh.sgid_attr);
+		ah->av.udp_sport = mlx5_ah_get_udp_sport(dev, ah_attr);
 		ah->av.stat_rate_sl |= (rdma_ah_get_sl(ah_attr) & 0x7) << 1;
 		if (gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP)
 #define MLX5_ECN_ENABLED BIT(1)
drivers/infiniband/hw/mlx5/main.c +2 -2
index 2db2309dde47..953c1d6b23aa 100644
@@ -628,8 +628,8 @@ static int mlx5_ib_del_gid(const struct ib_gid_attr *attr,
 			     attr->index, NULL, NULL);
 }
 
-__be16 mlx5_get_roce_udp_sport(struct mlx5_ib_dev *dev,
-			       const struct ib_gid_attr *attr)
+__be16 mlx5_get_roce_udp_sport_min(const struct mlx5_ib_dev *dev,
+				   const struct ib_gid_attr *attr)
 {
 	if (attr->gid_type != IB_GID_TYPE_ROCE_UDP_ENCAP)
 		return 0;
drivers/infiniband/hw/mlx5/mlx5_ib.h +2 -2
index a7b5581a7a4d..61ea8fc70787 100644
@@ -1383,8 +1383,8 @@ int mlx5_ib_get_vf_guid(struct ib_device *device, int vf, u8 port,
 int mlx5_ib_set_vf_guid(struct ib_device *device, int vf, u8 port,
 			u64 guid, int type);
 
-__be16 mlx5_get_roce_udp_sport(struct mlx5_ib_dev *dev,
-			       const struct ib_gid_attr *attr);
+__be16 mlx5_get_roce_udp_sport_min(const struct mlx5_ib_dev *dev,
+				   const struct ib_gid_attr *attr);
 
 void mlx5_ib_cleanup_cong_debugfs(struct mlx5_ib_dev *dev, u8 port_num);
 void mlx5_ib_init_cong_debugfs(struct mlx5_ib_dev *dev, u8 port_num);
Signature · 1 line
2.25.2
#9 lore raw
In reply to Leon Romanovsky
Quoted 18 lines · Leon Romanovsky

From: Leon Romanovsky <[email protected]>

Changelog:
v2: Dropped patch "RDMA/cm: Set flow label of recv_wc based on primary flow label", because it violates IBTA 13.5.4.3/13.5.4.4 sections.
v1: Added extra patch to reduce amount of kzalloc/kfree calls in the HCA set capability flow.
https://lore.kernel.org/lkml/[email protected]
v0: https://lore.kernel.org/linux-rdma/[email protected]
--------------------------------

From Mark:

This series provide flow label and UDP source port definition in RoCE v2. Those fields are used to create entropy for network routes (ECMP), load balancers and 802.3ad link aggregation switching that are not aware of RoCE headers.

Quoted 7 lines

Thanks.

Leon Romanovsky (1):
net/mlx5: Refactor HCA capability set flow

Mark Zhang (5):
net/mlx5: Enable SW-defined RoCEv2 UDP source port

Those two patches were applied to the mlx5-next, please pull.

Quoted 5 lines

RDMA/core: Add hash functions to calculate RoCEv2 flowlabel and UDP
source port
RDMA/mlx5: Define RoCEv2 udp source port when set path RDMA/cma: Initialize the flow label of CM's route path record RDMA/mlx5: Set UDP source port based on the grh.flow_label

Those patches need to go to the RDMA repo.

Thanks