bytcht-es8316: fix Speaker or Headphone no sound if enable Mic or Headset
PATCH 1/1 bytcht-es8316: fix Speaker or Headphone no sound if enable Mic or Headset
alsaucm -c bytcht-es8316 set _verb HiFi set _enadev Mic, Speaker will no sound. alsaucm -c bytcht-es8316 set _verb HiFi set _enadev Headset, Headphone will no sound.
--- ucm2/codecs/es8316/EnableSeq.conf | 2 -- 1 file changed, 2 deletions(-)
ucm2/codecs/es8316/EnableSeq.conf +0 -2
@@ -1,6 +1,4 @@ # Disable all inputs / outputs -cset "name='Speaker Switch' off" -cset "name='Headphone Switch' off" cset "name='Headset Mic Switch' off" cset "name='Internal Mic Switch' off"
Signature · 1 line
2.25.1
Hi,
Quoted 2 lines · On 4/13/20 4:59 PM, youling257 wrote:
alsaucm -c bytcht-es8316 set
_verbHiFi set_enadevMic, Speaker will no sound. alsaucm -c bytcht-es8316 set_verbHiFi set_enadevHeadset, Headphone will no sound.
I see the problem, so the idea of the global EnableSequence is to set defaults and then the EnableSequence of currently active devices run on top.
If we drop the default off of both switched and then shutdown the machine with no headphones inserted, so the speakers being used, then the 'Speaker Switch' on state will be saved on shutdown and restored on boot.
If we then boot with headphones inserted then AFAIK pulseaudio will run the global EnableSequence + the HeadPhones EnableSequence, leaving the 'Speaker Switch' on and now we get audio on both.
The problem seems to be that alsaucm not only runs the EnableSequence for the selected device but also the global one, which pulseaudio normally only does once at bootup.
I might be wrong here, maybe pulse will run the global EnableSeq + EnableSeq of active devices + DisableSeq of inactive devices when it starts. In that case the running of the DisableSeq of inactive devices will take care of turning off the speaker-switch when booting with the headphones inserted. In which case the default off of all switches can indeed be removed. Note in that case we should also remove the default off for the Headset + Internal Mic Switch, so a nack to this patch regardless.
Jaroslav, can you give us some guidance on how this is supposed to work ?
Also you say you use pulseaudio for your testing, AFAIK pulse does not suffer from the problem the alsaucm commands you mention do, so as long as you only use pulse things should work.
Regards,
Hans
Quoted 18 lines
Signed-off-by youling257 <[email protected]>--- ucm2/codecs/es8316/EnableSeq.conf | 2 -- 1 file changed, 2 deletions(-)ucm2/codecs/es8316/EnableSeq.conf +0
-2@@ -1,6 +1,4 @@ # Disable all inputs / outputs -cset "name='Speaker Switch' off" -cset "name='Headphone Switch' off" cset "name='Headset Mic Switch' off" cset "name='Internal Mic Switch' off"
Dne 13. 04. 20 v 17:46 Hans de Goede napsal(a):
Quoted 9 lines
Hi,
Quoted 2 lines · On 4/13/20 4:59 PM, youling257 wrote:
alsaucm -c bytcht-es8316 set
_verbHiFi set_enadevMic, Speaker will no sound. alsaucm -c bytcht-es8316 set_verbHiFi set_enadevHeadset, Headphone will no sound.I see the problem, so the idea of the global EnableSequence is to set defaults and then the EnableSequence of currently active devices run on top.
It's ok, it's just a wrong use of the alsaucm command. The PA should activate HiFi verb only once. Those two commands run the verb EnableSequence twice.
The correct test should be:
alsaucm -i -c bytcht-es8316 set _verb HiFi
alsaucm>> set _enadev Speaker
alsaucm>> set _enadev Headphone
alsaucm>> set _enadev Mic
alsaucm>> set _enadev Headset
... you may run the enable commands with a delay for tests.
The current UCM is designed for one task (application). I am playing with an idea to extend the alsactl state daemon to preserve the UCM settings and state for multiple applications using an RPC mechanism (dbus?).
Jaroslav
Signature · 2 lines
Jaroslav Kysela <[email protected]> Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
boot enter ubuntu no sound at all if EnableSeq.conf disable all output. “ The PA should activate HiFi verb only once.” i don't think so.
2020-04-14 16:07 GMT+08:00, Jaroslav Kysela <[email protected]>:
Quoted 39 lines
Dne 13. 04. 20 v 17:46 Hans de Goede napsal(a):
Quoted 11 lines
Hi,
Quoted 4 lines · On 4/13/20 4:59 PM, youling257 wrote:
alsaucm -c bytcht-es8316 set
_verbHiFi set_enadevMic, Speaker will no sound.
alsaucm -c bytcht-es8316 set_verbHiFi set_enadevHeadset, Headphone will no sound.I see the problem, so the idea of the global EnableSequence is to set defaults and then the EnableSequence of currently active devices run on top.
It's ok, it's just a wrong use of the alsaucm command. The PA should activate
HiFi verb only once. Those two commands run the verb EnableSequence twice.The correct test should be:
alsaucm -i -c bytcht-es8316 set
_verbHiFi
alsaucm>> set_enadevSpeaker
alsaucm>> set_enadevHeadphone
alsaucm>> set_enadevMic
alsaucm>> set_enadevHeadset... you may run the enable commands with a delay for tests.
The current UCM is designed for one task (application). I am playing with an
idea to extend the alsactl state daemon to preserve the UCM settings and state
for multiple applications using an RPC mechanism (dbus?).Jaroslav
--
Jaroslav Kysela <[email protected]>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
please remove es8316 cx2072x rt5672 Disable all inputs / outputs.
2020-04-15 14:26 GMT+08:00, youling 257 <[email protected]>:
Quoted 48 lines
boot enter ubuntu no sound at all if EnableSeq.conf disable all output. “ The PA should activate HiFi verb only once.” i don't think so.
2020-04-14 16:07 GMT+08:00, Jaroslav Kysela <[email protected]>:
Quoted 42 lines
Dne 13. 04. 20 v 17:46 Hans de Goede napsal(a):
Quoted 9 lines
Hi,
Quoted 5 lines · On 4/13/20 4:59 PM, youling257 wrote:
alsaucm -c bytcht-es8316 set
_verbHiFi set_enadevMic, Speaker will no
sound.
alsaucm -c bytcht-es8316 set_verbHiFi set_enadevHeadset, Headphone will no sound.Quoted 3 lines
I see the problem, so the idea of the global EnableSequence is to set defaults and then the EnableSequence of currently active devices run on top.
It's ok, it's just a wrong use of the alsaucm command. The PA should activate
HiFi verb only once. Those two commands run the verb EnableSequence twice.The correct test should be:
alsaucm -i -c bytcht-es8316 set
_verbHiFi
alsaucm>> set_enadevSpeaker
alsaucm>> set_enadevHeadphone
alsaucm>> set_enadevMic
alsaucm>> set_enadevHeadset... you may run the enable commands with a delay for tests.
The current UCM is designed for one task (application). I am playing with an
idea to extend the alsactl state daemon to preserve the UCM settings and state
for multiple applications using an RPC mechanism (dbus?).Jaroslav
--
Jaroslav Kysela <[email protected]>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
Hi,
Quoted 1 line · On 4/15/20 8:30 AM, youling 257 wrote:
please remove es8316 cx2072x rt5672 Disable all inputs / outputs.
No not going to happen. We need sane defaults.
There is something wrong with your setup lets try to figure out what is wrong rather then change these UCM profiles in a way which only makes things worse.
Regards,
Hans
Quoted 51 lines
2020-04-15 14:26 GMT+08:00, youling 257 <[email protected]>:
Quoted 48 lines
boot enter ubuntu no sound at all if EnableSeq.conf disable all output. “ The PA should activate HiFi verb only once.” i don't think so.
2020-04-14 16:07 GMT+08:00, Jaroslav Kysela <[email protected]>:
Quoted 42 lines
Dne 13. 04. 20 v 17:46 Hans de Goede napsal(a):
Quoted 9 lines
Hi,
Quoted 5 lines · On 4/13/20 4:59 PM, youling257 wrote:
alsaucm -c bytcht-es8316 set
_verbHiFi set_enadevMic, Speaker will no
sound.
alsaucm -c bytcht-es8316 set_verbHiFi set_enadevHeadset, Headphone will no sound.Quoted 3 lines
I see the problem, so the idea of the global EnableSequence is to set defaults and then the EnableSequence of currently active devices run on top.
It's ok, it's just a wrong use of the alsaucm command. The PA should activate
HiFi verb only once. Those two commands run the verb EnableSequence twice.The correct test should be:
alsaucm -i -c bytcht-es8316 set
_verbHiFi
alsaucm>> set_enadevSpeaker
alsaucm>> set_enadevHeadphone
alsaucm>> set_enadevMic
alsaucm>> set_enadevHeadset... you may run the enable commands with a delay for tests.
The current UCM is designed for one task (application). I am playing with an
idea to extend the alsactl state daemon to preserve the UCM settings and state
for multiple applications using an RPC mechanism (dbus?).Jaroslav
--
Jaroslav Kysela <[email protected]>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
Hi,
Quoted 2 lines · On 4/15/20 8:26 AM, youling 257 wrote:
boot enter ubuntu no sound at all if EnableSeq.conf disable all output. “ The PA should activate HiFi verb only once.” i don't think so.
Which version of pulseaudio does the Ubuntu you are using have?
There was a bug in pulseaudio 13.99.1 wrt the handling of UCM profiles. The pulseaudio from Fedora 31 updates has a fix for this, maybe Ubuntu's version is missing this fix?
Regards,
Hans
Quoted 43 lines
2020-04-14 16:07 GMT+08:00, Jaroslav Kysela <[email protected]>:
Quoted 39 lines
Dne 13. 04. 20 v 17:46 Hans de Goede napsal(a):
Quoted 11 lines
Hi,
Quoted 4 lines · On 4/13/20 4:59 PM, youling257 wrote:
alsaucm -c bytcht-es8316 set
_verbHiFi set_enadevMic, Speaker will no sound.
alsaucm -c bytcht-es8316 set_verbHiFi set_enadevHeadset, Headphone will no sound.I see the problem, so the idea of the global EnableSequence is to set defaults and then the EnableSequence of currently active devices run on top.
It's ok, it's just a wrong use of the alsaucm command. The PA should activate
HiFi verb only once. Those two commands run the verb EnableSequence twice.The correct test should be:
alsaucm -i -c bytcht-es8316 set
_verbHiFi
alsaucm>> set_enadevSpeaker
alsaucm>> set_enadevHeadphone
alsaucm>> set_enadevMic
alsaucm>> set_enadevHeadset... you may run the enable commands with a delay for tests.
The current UCM is designed for one task (application). I am playing with an
idea to extend the alsactl state daemon to preserve the UCM settings and state
for multiple applications using an RPC mechanism (dbus?).Jaroslav
--
Jaroslav Kysela <[email protected]>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
2020-04-15 16:04 GMT+08:00, Hans de Goede <[email protected]>:
Quoted 7 lines
Hi,
Quoted 2 lines · On 4/15/20 8:26 AM, youling 257 wrote:
boot enter ubuntu no sound at all if EnableSeq.conf disable all output. “ The PA should activate HiFi verb only once.” i don't think so.
Which version of pulseaudio does the Ubuntu you are using have?
pulseaudio (1:13.99.1-1ubuntu2) packages.ubuntu.com/focal/pulseaudio what patch?
Quoted 62 lines
There was a bug in pulseaudio 13.99.1 wrt the handling of UCM profiles. The pulseaudio from Fedora 31 updates has a fix for this, maybe Ubuntu's version is missing this fix?
Regards,
Hans
Quoted 46 lines
2020-04-14 16:07 GMT+08:00, Jaroslav Kysela <[email protected]>:
Quoted 42 lines
Dne 13. 04. 20 v 17:46 Hans de Goede napsal(a):
Quoted 9 lines
Hi,
Quoted 5 lines · On 4/13/20 4:59 PM, youling257 wrote:
alsaucm -c bytcht-es8316 set
_verbHiFi set_enadevMic, Speaker will no
sound.
alsaucm -c bytcht-es8316 set_verbHiFi set_enadevHeadset, Headphone will no sound.Quoted 3 lines
I see the problem, so the idea of the global EnableSequence is to set defaults and then the EnableSequence of currently active devices run on top.
It's ok, it's just a wrong use of the alsaucm command. The PA should activate
HiFi verb only once. Those two commands run the verb EnableSequence twice.The correct test should be:
alsaucm -i -c bytcht-es8316 set
_verbHiFi
alsaucm>> set_enadevSpeaker
alsaucm>> set_enadevHeadphone
alsaucm>> set_enadevMic
alsaucm>> set_enadevHeadset... you may run the enable commands with a delay for tests.
The current UCM is designed for one task (application). I am playing with an
idea to extend the alsactl state daemon to preserve the UCM settings and state
for multiple applications using an RPC mechanism (dbus?).Jaroslav
--
Jaroslav Kysela <[email protected]>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
Hi,
Quoted 9 lines · On 4/15/20 10:18 AM, youling 257 wrote:
2020-04-15 16:04 GMT+08:00, Hans de Goede <[email protected]>:
Quoted 7 lines
Hi,
Quoted 2 lines · On 4/15/20 8:26 AM, youling 257 wrote:
boot enter ubuntu no sound at all if EnableSeq.conf disable all output. “ The PA should activate HiFi verb only once.” i don't think so.
Which version of pulseaudio does the Ubuntu you are using have?
pulseaudio (1:13.99.1-1ubuntu2) packages.ubuntu.com/focal/pulseaudio
Ah yes then you are likely hitting the bug I was talking about.
Can you please file a bug against Ubuntu for this?
Here is the original Fedora bug for this:
https://bugzilla.redhat.com/show_bug.cgi?id=1818883
And here are the patches fixing it:
https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/276/
Regards,
Hans
2020-04-15 16:45 GMT+08:00, Hans de Goede <[email protected]>:
Quoted 10 lines
Hi,
Quoted 7 lines · On 4/15/20 10:18 AM, youling 257 wrote:
2020-04-15 16:04 GMT+08:00, Hans de Goede <[email protected]>:
Quoted 6 lines
Hi,
Quoted 2 lines · On 4/15/20 8:26 AM, youling 257 wrote:
boot enter ubuntu no sound at all if EnableSeq.conf disable all output. “ The PA should activate HiFi verb only once.” i don't think so.
Quoted 6 lines
Quoted 2 lines
Quoted 1 line
Which version of pulseaudio does the Ubuntu you are using have?
pulseaudio (1:13.99.1-1ubuntu2) packages.ubuntu.com/focal/pulseaudio
Ah yes then you are likely hitting the bug I was talking about.
Can you please file a bug against Ubuntu for this?
open a bug, https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1872970
Quoted 11 lines
Here is the original Fedora bug for this:
https://bugzilla.redhat.com/show_bug.cgi?id=1818883And here are the patches fixing it:
https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/276/Regards,
Hans
Hi,
Quoted 11 lines · On 4/15/20 4:50 PM, youling 257 wrote:
2020-04-15 16:45 GMT+08:00, Hans de Goede <[email protected]>:
Quoted 10 lines
Hi,
Quoted 7 lines · On 4/15/20 10:18 AM, youling 257 wrote:
2020-04-15 16:04 GMT+08:00, Hans de Goede <[email protected]>:
Quoted 6 lines
Hi,
Quoted 2 lines · On 4/15/20 8:26 AM, youling 257 wrote:
boot enter ubuntu no sound at all if EnableSeq.conf disable all output. “ The PA should activate HiFi verb only once.” i don't think so.
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
Quoted 1 line
Which version of pulseaudio does the Ubuntu you are using have?
pulseaudio (1:13.99.1-1ubuntu2) packages.ubuntu.com/focal/pulseaudio
Ah yes then you are likely hitting the bug I was talking about.
Can you please file a bug against Ubuntu for this?
open a bug, https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1872970
Great, thank you.
Regards,
Hans
2020-04-13 23:46 GMT+08:00, Hans de Goede <[email protected]>:
Quoted 3 lines
Also you say you use pulseaudio for your testing, AFAIK pulse does not suffer from the problem the alsaucm commands you mention do,
I said "remove the EnableSeq.conf Disable all output, i can get speaker and headphone work on ubuntu focal with pulseaudio."
Quoted 2 lines
so as long as
you only use pulse things should work.
Disable all inputs / outputs, pulseaudio sound not work.
Quoted 28 lines
Regards,
Hans
Quoted 19 lines
Signed-off-by youling257 <[email protected]>--- ucm2/codecs/es8316/EnableSeq.conf | 2 -- 1 file changed, 2 deletions(-)ucm2/codecs/es8316/EnableSeq.conf +0
-2@@ -1,6 +1,4 @@ # Disable all inputs / outputs -cset "name='Speaker Switch' off" -cset "name='Headphone Switch' off" cset "name='Headset Mic Switch' off" cset "name='Internal Mic Switch' off"