ath11k: rx path optimizations
PATCH 1/1 ath11k: rx path optimizations
During RX, accessing the reo dest ring descriptor directly is consuming a lot of CPU cycles. Accessing the descriptor after copying it locally has improved CPU usage by around ~10-15% while measuring throughput in RX DBTC test cases(all radios are involved in the throughput measurement).
HW tested: IPQ8074
--- drivers/net/wireless/ath/ath11k/dp_rx.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/net/wireless/ath/ath11k/dp_rx.c +7 -7
@@ -2403,12 +2403,12 @@ int ath11k_dp_process_rx(struct ath11k_base *ab, int ring_id, try_again:while ((rx_desc =ath11k_hal_srng_dst_get_next_entry (ab, srng))) { -struct hal_reo_dest_ring *desc = (struct hal_reo_dest_ring *)rx_desc; +struct hal_reo_dest_ring desc = *(struct hal_reo_dest_ring *)rx_desc;enum hal_reo_dest_ring_push_reason push_reason;u32 cookie; cookie =FIELD_GET (BUFFER_ADDR_INFO1_SW_COOKIE , - desc->buf_addr_info.info1); + desc.buf_addr_info.info1); buf_id =FIELD_GET (DP_RXDMA_BUF_COOKIE_BUF_ID , cookie); mac_id =FIELD_GET (DP_RXDMA_BUF_COOKIE_PDEV_ID , cookie);
@@ -2436,7 +2436,7 @@ int ath11k_dp_process_rx(struct ath11k_base *ab, int ring_id, total_msdu_reaped++; push_reason =FIELD_GET (HAL_REO_DEST_RING_INFO0_PUSH_REASON , - desc->info0); + desc.info0);if (push_reason !=HAL_REO_DEST_RING_PUSH_REASON_ROUTING_INSTRUCTION ) {dev_kfree_skb_any (msdu);
@@ -2444,15 +2444,15 @@ int ath11k_dp_process_rx(struct ath11k_base *ab, int ring_id,continue ; } - rxcb->is_first_msdu = !!(desc->rx_msdu_info.info0 & + rxcb->is_first_msdu = !!(desc.rx_msdu_info.info0 &RX_MSDU_DESC_INFO0_FIRST_MSDU_IN_MPDU ); - rxcb->is_last_msdu = !!(desc->rx_msdu_info.info0 & + rxcb->is_last_msdu = !!(desc.rx_msdu_info.info0 &RX_MSDU_DESC_INFO0_LAST_MSDU_IN_MPDU ); - rxcb->is_continuation = !!(desc->rx_msdu_info.info0 & + rxcb->is_continuation = !!(desc.rx_msdu_info.info0 &RX_MSDU_DESC_INFO0_MSDU_CONTINUATION ); rxcb->mac_id = mac_id; rxcb->tid =FIELD_GET (HAL_REO_DEST_RING_INFO0_RX_QUEUE_NUM , - desc->info0); + desc.info0);__skb_queue_tail (&msdu_list, msdu);
Signature · 6 lines
2.7.4 _______________________________________________ ath11k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath11k
Quoted 10 lines · Manikanta Pubbisetty
During RX, accessing the reo dest ring descriptor directly is consuming a lot of CPU cycles. Accessing the descriptor after copying it locally has improved CPU usage by around ~10-15% while measuring throughput in RX DBTC test cases(all radios are involved in the throughput measurement).
HW tested: IPQ8074
Signed-off-by Manikanta Pubbisetty <[email protected]>Signed-off-by Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
7395fb496577 ath11k: rx path optimizations
Signature · 3 lines
https://patchwork.kernel.org/patch/11481425/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Quoted 10 lines · Manikanta Pubbisetty
During RX, accessing the reo dest ring descriptor directly is consuming a lot of CPU cycles. Accessing the descriptor after copying it locally has improved CPU usage by around ~10-15% while measuring throughput in RX DBTC test cases(all radios are involved in the throughput measurement).
HW tested: IPQ8074
Signed-off-by Manikanta Pubbisetty <[email protected]>Signed-off-by Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
7395fb496577 ath11k: rx path optimizations
Signature · 8 lines
https://patchwork.kernel.org/patch/11481425/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath11k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath11k