armv8: ls1028a: define esdhc_status_fixup
PATCH 1/1 armv8: ls1028a: define esdhc_status_fixup
From: Yinbo Zhu <[email protected]>
This patch is to define esdhc_status_fixup function for ls1028a to disable SDHC1/SDHC2 status in device tree node if not selected.
--- .../include/asm/arch-fsl-layerscape/immap_lsch3.h | 5 +++ board/freescale/ls1028a/ls1028a.c | 40 ++++++++++++++++++++++ 2 files changed, 45 insertions(+)
arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +5 -0
@@ -232,7 +232,12 @@#define DCFG_PORSR1 0x000#define DCFG_PORSR1_RCW_SRC 0xff800000#define DCFG_PORSR1_RCW_SRC_NOR 0x12f00000 +#define DCFG_RCWSR12 0x12c +#define DCFG_RCWSR12_SDHC_SHIFT 24 +#define DCFG_RCWSR12_SDHC_MASK 0x7#define DCFG_RCWSR13 0x130 +#define DCFG_RCWSR13_SDHC_SHIFT 3 +#define DCFG_RCWSR13_SDHC_MASK 0x7#define DCFG_RCWSR13_DSPI (0 << 8)#define DCFG_RCWSR15 0x138#define DCFG_RCWSR15_IFCGRPABASE_QSPI 0x3
board/freescale/ls1028a/ls1028a.c +40 -0
@@ -135,6 +135,46 @@ void detail_board_ddr_info(void)print_ddr_info (0 ); } +int esdhc_status_fixup (void *blob,const char *compat) +{ +void __iomem *dcfg_ccsr = (void __iomem *)DCFG_BASE ; +char esdhc1_path[] ="/soc/mmc at 2140000" ; +char esdhc2_path[] ="/soc/mmc at 2150000" ; +char dspi1_path[] ="/soc/spi at 2100000" ; +char dspi2_path[] ="/soc/spi@2110000" ; +u32 mux_sdhc1, mux_sdhc2; +u32 io =0 ; + +/* +* The PMUX IO-expander for mux select is used to control +* the muxing of various onboard interfaces. +*/ + + io =in_le32 (dcfg_ccsr +DCFG_RCWSR12 ); + mux_sdhc1 = (io >>DCFG_RCWSR12_SDHC_SHIFT ) &DCFG_RCWSR12_SDHC_MASK ; + +/* Disable esdhc1/dspi1 if not selected. */ +if (mux_sdhc1 !=0 ) +do_fixup_by_path (blob, esdhc1_path,"status" ,"disabled" , +sizeof ("disabled" ),1 ); +if (mux_sdhc1 !=2 ) +do_fixup_by_path (blob, dspi1_path,"status" ,"disabled" , +sizeof ("disabled" ),1 ); + + io =in_le32 (dcfg_ccsr +DCFG_RCWSR13 ); + mux_sdhc2 = (io >>DCFG_RCWSR13_SDHC_SHIFT ) &DCFG_RCWSR13_SDHC_MASK ; + +/* Disable esdhc2/dspi2 if not selected. */ +if (mux_sdhc2 !=0 ) +do_fixup_by_path (blob, esdhc2_path,"status" ,"disabled" , +sizeof ("disabled" ),1 ); +if (mux_sdhc2 !=2 ) +do_fixup_by_path (blob, dspi2_path,"status" ,"disabled" , +sizeof ("disabled" ),1 ); + +return 0 ; +} +#ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup (void *blob,bd_t *bd) {
Signature · 1 line
2.9.5
Priyanka Jain (OSS)
AppliedPATCH 1/1 armv8: ls1028a: define esdhc_status_fixup
Quoted 12 lines
-----Original Message-----
From: U-Boot <[email protected]> On Behalf Of Xiaowei Bao
Sent: Tuesday, April 14, 2020 2:55 PM
To: Sudhanshu Gupta <[email protected]>; Harninder Rai <[email protected]>; rajesh.bhagat at nxp.co; Andy Tang <[email protected]>; u-boot at lists.denx.de
Cc: Yinbo Zhu <[email protected]>; Xiaowei Bao <[email protected]>; Y.b. Lu <[email protected]>
Subject: [PATCH] armv8: ls1028a: defineesdhc_status_fixupFrom: Yinbo Zhu <[email protected]>
Quoted 7 lines
This patch is to define
esdhc_status_fixupfunction for ls1028a to disable SDHC1/SDHC2 status in device tree node if not selected.Signed-off-by Yinbo Zhu <[email protected]>Signed-off-by Xiaowei Bao <[email protected]>Signed-off-by Yangbo Lu <[email protected]>---
Applied to fsl-qoriq. Awaiting upstream.
Thanks
Priyanka