ARM: dts: ux500: samsung-golden: Add proximity sensor
Subsystems (2)
PATCH 1/2 ARM: dts: ux500: samsung-golden: Add proximity sensor
samsung-golden has the same sharp,gp2ap002s00f proximity sensor that is also used in samsung-skomer.
A driver was added for it in
commit 97d642e23037 ("iio: light: Add a driver for Sharp GP2AP002x00F").
Now that it was merged we can add an entry for it in the device tree for samsung-golden.
--- .../arm/boot/dts/ste-ux500-samsung-golden.dts | 35 +++++++++++++++++++ 1 file changed, 35 insertions(+)
arch/arm/boot/dts/ste-ux500-samsung-golden.dts +35 -0
@@ -146,6 +146,32 @@ uart@80007000 { pinctrl-1 = <&u2rxtx_c_1_sleep>; }; + i2c@80004000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c0_a_1_default>; + pinctrl-1 = <&i2c0_a_1_sleep>; + + proximity@44 { + compatible = "sharp,gp2ap002s00f"; + reg = <0x44>; + + /* GPIO146 (PS_INT) */ + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&ab8500_ldo_aux1_reg>; + vio-supply = <&ab8500_ldo_aux8_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&proximity_default>; + + sharp,proximity-far-hysteresis = <0x40>; + sharp,proximity-close-hysteresis = <0x0f>; + }; + }; + i2c@80128000 { status = "okay";
@@ -375,6 +401,15 @@ golden_cfg1 { }; }; + proximity { + proximity_default: proximity_default { + golden_cfg1 { + pins = "GPIO146_D13"; /* PS_INT */ + ste,config = <&gpio_in_nopull>; + }; + }; + }; + imu { imu_default: imu_default { golden_cfg1 {
Signature · 1 line
2.26.0
PATCH 2/2 ARM: defconfig: u8500: Enable CONFIG_GP2AP002
sharp,gp2ap002s00f is used as a proximity sensor in samsung-golden and samsung-skomer.
--- arch/arm/configs/u8500_defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm/configs/u8500_defconfig +1 -0
@@ -125,6 +125,7 @@ CONFIG_IIO_ST_ACCEL_3AXIS=y CONFIG_IIO_ST_GYRO_3AXIS=y CONFIG_INV_MPU6050_I2C=y CONFIG_BH1780=y +CONFIG_GP2AP002=y CONFIG_AK8974=y CONFIG_IIO_ST_MAGN_3AXIS=y CONFIG_IIO_HRTIMER_TRIGGER=y
Signature · 1 line
2.26.0
Re: [PATCH 2/2] ARM: defconfig: u8500: Enable CONFIG_GP2AP002
Quoted 4 lines · Stephan Gerhold
sharp,gp2ap002s00f is used as a proximity sensor in samsung-golden and samsung-skomer.
Signed-off-by Stephan Gerhold <[email protected]>
Ooops I saw now that I already had this in my "Skomer and misc" enablement patch. (rebasing my trees today).
I can put this in front of that patch and take it out of mine if you prefer stepwise enablement.
Yours,
Linus Walleij
Re: [PATCH 2/2] ARM: defconfig: u8500: Enable CONFIG_GP2AP002
Quoted 5 lines · Linus Walleij
Quoted 3 lines · Stephan Gerhold
sharp,gp2ap002s00f is used as a proximity sensor in samsung-golden and samsung-skomer.
Quoted 8 lines
Quoted 1 line
Signed-off-by Stephan Gerhold <[email protected]>Ooops I saw now that I already had this in my "Skomer and misc" enablement patch. (rebasing my trees today).
I can put this in front of that patch and take it out of mine if you prefer stepwise enablement.
Do you mean the "ARM: defconfig: u8500: Enable new drivers for ux500" patch? It doesn't matter which commit/patch adds it, as long as it ends up in the u8500_defconfig :)
Thanks,
Stephan
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 10 lines · Stephan Gerhold
samsung-golden has the same sharp,gp2ap002s00f proximity sensor that is also used in samsung-skomer.
A driver was added for it in
commit97d642e23037("iio: light: Add a driver for Sharp GP2AP002x00F").Now that it was merged we can add an entry for it in the device tree for samsung-golden.
Signed-off-by Stephan Gerhold <[email protected]>
Patch applied!
Yours,
Linus Walleij
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel