add clock and emmc/sd nodes for SC9863A
Subsystems (2)
[email protected]
reviewercover add clock and emmc/sd nodes for SC9863A
From: Chunyan Zhang <[email protected]>
SC9863A clock driver got merged, this patch-set adds clock nodes, emmc and sd card nodes, so that we can startup debian on SC9863A.
Chunyan Zhang (2):
arm64: dts: Add SC9863A clock nodes
arm64: dts: Add SC9863A emmc and sd card nodes
arch/arm64/boot/dts/sprd/sc9863a.dtsi | 66 +++++++++++ arch/arm64/boot/dts/sprd/sharkl3.dtsi | 164 ++++++++++++++++++++++++++ 2 files changed, 230 insertions(+)
Signature · 1 line
2.20.1
[email protected]
reviewerPATCH RESEND 1/2 arm64: dts: Add SC9863A clock nodes
From: Chunyan Zhang <[email protected]>
add clock devicetree nodes for SC9863A.
Signed-off-by Chunyan Zhang <[email protected]>
--- arch/arm64/boot/dts/sprd/sc9863a.dtsi | 24 ++++ arch/arm64/boot/dts/sprd/sharkl3.dtsi | 164 ++++++++++++++++++++++++++ 2 files changed, 188 insertions(+)
arch/arm64/boot/dts/sprd/sc9863a.dtsi +24 -0
@@ -159,6 +159,30 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + ap_clk: clock-controller@21500000 { + compatible = "sprd,sc9863a-ap-clk"; + reg = <0 0x21500000 0 0x1000>; + clocks = <&ext_32k>, <&ext_26m>; + clock-names = "ext-32k", "ext-26m"; + #clock-cells = <1>; + }; + + aon_clk: clock-controller@402d0000 { + compatible = "sprd,sc9863a-aon-clk"; + reg = <0 0x402d0000 0 0x1000>; + clocks = <&ext_26m>, <&rco_100m>, + <&ext_32k>, <&ext_4m>; + clock-names = "ext-26m", "rco-100m", + "ext-32k", "ext-4m"; + #clock-cells = <1>; + }; + + mm_clk: clock-controller@60900000 { + compatible = "sprd,sc9863a-mm-clk"; + reg = <0 0x60900000 0 0x1000>; + #clock-cells = <1>; + }; + funnel@10001000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x10001000 0 0x1000>;
arch/arm64/boot/dts/sprd/sharkl3.dtsi +164 -0
174 lines not on this page · raw message
Signature · 1 line
2.20.1
[email protected]
reviewerPATCH RESEND 2/2 arm64: dts: Add SC9863A emmc and sd card nodes
In reply to [email protected]From: Chunyan Zhang <[email protected]>
Add emmc and sd card devicetree nodes for SC9863A.
Signed-off-by Chunyan Zhang <[email protected]>
--- arch/arm64/boot/dts/sprd/sc9863a.dtsi | 42 +++++++++++++++++++++++++++ 1 file changed, 42 insertions(+)
arch/arm64/boot/dts/sprd/sc9863a.dtsi +42 -0
@@ -5,6 +5,7 @@ * Copyright (C) 2019, Unisoc Inc. */ +#include <dt-bindings/clock/sprd,sc9863a-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "sharkl3.dtsi"
@@ -543,5 +544,46 @@ }; }; }; + + ap-ahb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + sdio0: sdio@20300000 { + compatible = "sprd,sdhci-r11"; + reg = <0 0x20300000 0 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + + clock-names = "sdio", "enable"; + clocks = <&aon_clk CLK_SDIO0_2X>, + <&apahb_gate CLK_SDIO0_EB>; + assigned-clocks = <&aon_clk CLK_SDIO0_2X>; + assigned-clock-parents = <&rpll CLK_RPLL_390M>; + + bus-width = <4>; + no-sdio; + no-mmc; + }; + + sdio3: sdio@20600000 { + compatible = "sprd,sdhci-r11"; + reg = <0 0x20600000 0 0x1000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + + clock-names = "sdio", "enable"; + clocks = <&aon_clk CLK_EMMC_2X>, + <&apahb_gate CLK_EMMC_EB>; + assigned-clocks = <&aon_clk CLK_EMMC_2X>; + assigned-clock-parents = <&rpll CLK_RPLL_390M>; + + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + cap-mmc-hw-reset; + }; + }; }; };
Signature · 1 line
2.20.1