dt-bindings: display: convert rockchip rk3066 hdmi bindings to yaml
Subsystems (5)
PATCH v2 1/1 dt-bindings: display: convert rockchip rk3066 hdmi bindings to yaml
Current dts files with 'hdmi' nodes for rk3066 are manually verified. In order to automate this process rockchip,rk3066-hdmi.txt has to be converted to yaml.
---
Changes v2:
Fix irq.h already included in arm-gic.h
--- .../display/rockchip/rockchip,rk3066-hdmi.txt | 72 ----------- .../display/rockchip/rockchip,rk3066-hdmi.yaml | 140 +++++++++++++++++++++ 2 files changed, 140 insertions(+), 72 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt deleted +0 -72
@@ -1,72 +0,0 @@ -Rockchip specific extensions for rk3066 HDMI -============================================ - -Required properties: -- compatible: - "rockchip,rk3066-hdmi"; -- reg: - Physical base address and length of the controller's registers. -- clocks, clock-names: - Phandle to HDMI controller clock, name should be "hclk". -- interrupts: - HDMI interrupt number. -- power-domains: - Phandle to the RK3066_PD_VIO power domain. -- rockchip,grf: - This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1. -- ports: - Contains one port node with two endpoints, numbered 0 and 1, - connected respectively to vop0 and vop1. - Contains one port node with one endpoint - connected to a hdmi-connector node. -- pinctrl-0, pinctrl-name: - Switch the iomux for the HPD/I2C pins to HDMI function. - -Example: - hdmi: hdmi@10116000 { - compatible = "rockchip,rk3066-hdmi"; - reg = <0x10116000 0x2000>; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_HDMI>; - clock-names = "hclk"; - power-domains = <&power RK3066_PD_VIO>; - rockchip,grf = <&grf>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - hdmi_in: port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - hdmi_in_vop0: endpoint@0 { - reg = <0>; - remote-endpoint = <&vop0_out_hdmi>; - }; - hdmi_in_vop1: endpoint@1 { - reg = <1>; - remote-endpoint = <&vop1_out_hdmi>; - }; - }; - hdmi_out: port@1 { - reg = <1>; - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; - }; - }; - }; - -&pinctrl { - hdmi { - hdmi_hpd: hdmi-hpd { - rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>; - }; - hdmii2c_xfer: hdmii2c-xfer { - rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>, - <0 RK_PA2 1 &pcfg_pull_none>; - }; - }; -};
Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml new file +140 -0
140 lines not on this page · raw message
Signature · 1 line
2.11.0
Quoted 8 lines · Johan Jonker
Current dts files with 'hdmi' nodes for rk3066 are manually verified. In order to automate this process rockchip,rk3066-hdmi.txt has to be converted to yaml.
Signed-off-by Johan Jonker <[email protected]>---
Changes v2:
Fixirq.halready included inarm-gic.h
Quoted 7 lines
--- .../display/rockchip/rockchip,rk3066-hdmi.txt | 72 ----------- .../display/rockchip/rockchip,rk3066-hdmi.yaml | 140 +++++++++++++++++++++ 2 files changed, 140 insertions(+), 72 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
Heiko Stuebner
maintainerHi Johan,
Am Freitag, 3. April 2020, 15:36:30 CEST schrieb Johan Jonker:
Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml line 1
Quoted 9 lines
Current dts files with 'hdmi' nodes for rk3066 are manually verified. In order to automate this process rockchip,rk3066-hdmi.txt has to be converted to yaml.
Signed-off-by Johan Jonker <[email protected]>+++
b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yamlDocumentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml new file +1
-0@@ -0,0 +1,140 @@ +# SPDX-License-Identifier: GPL-2.0
checkpatch complains about the licensing:
-:100: WARNING:SPDX_LICENSE_TAG: DT binding documents should be licensed (GPL-2.0-only OR BSD-2-Clause) #100: FILE: Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml:1:
+# SPDX-License-Identifier: GPL-2.0
please consider adapting the license accordingly
Thanks
Heiko
Hi Heiko,
Quoted 15 lines · Heiko Stuebner
Hi Johan,
Am Freitag, 3. April 2020, 15:36:30 CEST schrieb Johan Jonker:
Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml line 1
Quoted 9 lines
Current dts files with 'hdmi' nodes for rk3066 are manually verified. In order to automate this process rockchip,rk3066-hdmi.txt has to be converted to yaml.
Signed-off-by Johan Jonker <[email protected]>+++
b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yamlDocumentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml new file +1
-0@@ -0,0 +1,140 @@ +# SPDX-License-Identifier: GPL-2.0checkpatch complains about the licensing:
Quoted 5 lines
-:100: WARNING:SPDX_LICENSE_TAG: DT binding documents should be licensed (GPL-2.0-only OR BSD-2-Clause) #100: FILE:
Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml:1:
+# SPDX-License-Identifier: GPL-2.0please consider adapting the license accordingly
This is a conversion of a existing document. => GPL-2.0
Quoted 5 lines
Thanks
Heiko
Quoted 8 lines · Johan Jonker
Current dts files with 'hdmi' nodes for rk3066 are manually verified. In order to automate this process rockchip,rk3066-hdmi.txt has to be converted to yaml.
Signed-off-by Johan Jonker <[email protected]>Reviewed-by Rob Herring <[email protected]>[...]
Applied, thanks!
[1/1] dt-bindings: display: convert rockchip rk3066 hdmi bindings to yaml
commit: 8eea6e26fc2eda6922e5008ccb7f55bc1775d5b3
Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>