clocksource/drivers/timer-atmel-tcb: add sama5d2 support
Subsystems (5)
Alexandre Belloni
maintainerv2 cover clocksource/drivers/timer-atmel-tcb: add sama5d2 support
This series mainly adds sama5d2 support where we need to avoid using clock index 0 because that clock is never enabled by the driver.
There is also a rework of the 32khz clock handling so it is not used for clockevents on 32 bit counter because the increased rate improves the resolution and doesn't have any drawback with that counter width. This replaces a patch that has been carried in the linux-rt tree for a while.
Changes in v2:
- Rebased on v5.7-rc1
- Moved the binding documentation to its proper place
- Added back the atmel,tcb-timer child node documentation
Alexandre Belloni (8):
dt-bindings: atmel-tcb: convert bindings to json-schema
dt-bindings: microchip: atmel,at91rm9200-tcb: add sama5d2 compatible
ARM: dts: at91: sama5d2: add TCB GCLK clocksource/drivers/timer-atmel-tcb: rework 32khz clock selection clocksource/drivers/timer-atmel-tcb: fill tcb_config clocksource/drivers/timer-atmel-tcb: stop using the 32kHz for
clockevents
clocksource/drivers/timer-atmel-tcb: allow selecting first divider clocksource/drivers/timer-atmel-tcb: add sama5d2 support
Kamel Bouhara (1):
ARM: at91: add atmel tcb capabilities
.../devicetree/bindings/mfd/atmel-tcb.txt | 56 --------- .../soc/microchip/atmel,at91rm9200-tcb.yaml | 113 ++++++++++++++++++ .../bindings/timer/atmel,tcb-timer.yaml | 51 ++++++++ arch/arm/boot/dts/sama5d2.dtsi | 12 +- drivers/clocksource/timer-atmel-tcb.c | 101 +++++++++------- include/soc/at91/atmel_tcb.h | 5 + 6 files changed, 233 insertions(+), 105 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-tcb.txt create mode 100644 Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml create mode 100644 Documentation/devicetree/bindings/timer/atmel,tcb-timer.yaml
Signature · 1 line
2.25.2
Alexandre Belloni
maintainerPATCH v2 1/9 dt-bindings: atmel-tcb: convert bindings to json-schema
Convert Atmel Timer Counter Blocks bindings to DT schema format using json-schema.
Also move it out of mfd as it is not and has never been related to mfd.
---
Cc: Rob Herring <[email protected]>
Changes in v2:
- Rebased on v5.7-rc1
- Moved the binding documentation to its proper place
- Added back the atmel,tcb-timer child node documentation
.../devicetree/bindings/mfd/atmel-tcb.txt | 56 ------------ .../soc/microchip/atmel,at91rm9200-tcb.yaml | 89 +++++++++++++++++++ .../bindings/timer/atmel,tcb-timer.yaml | 51 +++++++++++ 3 files changed, 140 insertions(+), 56 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-tcb.txt create mode 100644 Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml create mode 100644 Documentation/devicetree/bindings/timer/atmel,tcb-timer.yaml
Documentation/devicetree/bindings/mfd/atmel-tcb.txt deleted +0 -56
@@ -1,56 +0,0 @@ -* Device tree bindings for Atmel Timer Counter Blocks -- compatible: Should be "atmel,<chip>-tcb", "simple-mfd", "syscon". - <chip> can be "at91rm9200" or "at91sam9x5" -- reg: Should contain registers location and length -- #address-cells: has to be 1 -- #size-cells: has to be 0 -- interrupts: Should contain all interrupts for the TC block - Note that you can specify several interrupt cells if the TC - block has one interrupt per channel. -- clock-names: tuple listing input clock names. - Required elements: "t0_clk", "slow_clk" - Optional elements: "t1_clk", "t2_clk" -- clocks: phandles to input clocks. - -The TCB can expose multiple subdevices: - * a timer - - compatible: Should be "atmel,tcb-timer" - - reg: Should contain the TCB channels to be used. If the - counter width is 16 bits (at91rm9200-tcb), two consecutive - channels are needed. Else, only one channel will be used. - -Examples: - -One interrupt per TC block: - tcb0: timer@fff7c000 { - compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xfff7c000 0x100>; - interrupts = <18 4>; - clocks = <&tcb0_clk>, <&clk32k>; - clock-names = "t0_clk", "slow_clk"; - - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>, <1>; - }; - - timer@2 { - compatible = "atmel,tcb-timer"; - reg = <2>; - }; - }; - -One interrupt per TC channel in a TC block: - tcb1: timer@fffdc000 { - compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xfffdc000 0x100>; - interrupts = <26 4>, <27 4>, <28 4>; - clocks = <&tcb1_clk>, <&clk32k>; - clock-names = "t0_clk", "slow_clk"; - }; - -
Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml new file +89 -0
89 lines not on this page · raw message
Documentation/devicetree/bindings/timer/atmel,tcb-timer.yaml new file +51 -0
51 lines not on this page · raw message
Signature · 7 lines
2.25.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Rob Herring
maintainerRe: [PATCH v2 1/9] dt-bindings: atmel-tcb: convert bindings to json-schema
Quoted 57 lines · Alexandre Belloni
Convert Atmel Timer Counter Blocks bindings to DT schema format using json-schema.
Also move it out of mfd as it is not and has never been related to mfd.
Signed-off-by Alexandre Belloni <[email protected]>---
Cc: Rob Herring <[email protected]>Changes in v2:
- Rebased on v5.7-rc1
- Moved the binding documentation to its proper place
- Added back the atmel,tcb-timer child node documentation.../devicetree/bindings/mfd/atmel-tcb.txt | 56 ------------ .../soc/microchip/atmel,at91rm9200-tcb.yaml | 89 +++++++++++++++++++ .../bindings/timer/atmel,tcb-timer.yaml | 51 +++++++++++ 3 files changed, 140 insertions(+), 56 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-tcb.txt create mode 100644 Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml create mode 100644 Documentation/devicetree/bindings/timer/atmel,tcb-timer.yamlDocumentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml new file +28
-0@@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Atmel Timer Counter Block + +maintainers: + - Alexandre Belloni <[email protected]> + +description: | + The Atmel (now Microchip) SoCs have timers named Timer Counter Block. Each + timer has three channels with two counters each. + +properties: + compatible: + items: + - enum: + - atmel,at91rm9200-tcb + - atmel,at91sam9x5-tcb + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + interrupts:
Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml line 38
Quoted 10 lines
Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml new file +10
-0+ description: + List of interrupts. One interrupt per TCB channel if available or one + interrupt for the TC block + minItems: 1 + maxItems: 3 + + clock-names: + description: + List of clock names. Always includes t0_clk and slow clk. Also includes + t1_clk and t2_clk if a clock per channel is available.
This description can be expressed as:
allOf:
- contains:
const: t0_clk
- contains:
const: slow_clk
However, if there's only 2 combinations to support with either 2 clocks or 4 clocks, then a 'oneOf' listing the 2 exact items lists would be better.
Quoted 17 lines
Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml new file +17
-0+ minItems: 2 + maxItems: 4 + items: + enum: + - t0_clk + - t1_clk + - t2_clk + - slow_clk + + clocks: + minItems: 2 + maxItems: 4 + + '#address-cells': + const: 1 + + '#size-cells':
Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml line 65
Quoted 10 lines
Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml new file +10
-0+ const: 0 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - '#address-cells' + - '#size-cells'
additionalProperties: false
Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml line 71
Quoted 6 lines
Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml new file +6
-0+ +examples: + - | + /* One interrupt per TC block: */ + tcb0: timer@fff7c000 { + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
A simple-mfd without child nodes?
Quoted 43 lines
Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml new file +18
-0+ #address-cells = <1>; + #size-cells = <0>; + reg = <0xfff7c000 0x100>; + interrupts = <18 4>; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + }; + + /* One interrupt per TC channel in a TC block: */ + tcb1: timer@fffdc000 { + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfffdc000 0x100>; + interrupts = <26 4>, <27 4>, <28 4>; + clocks = <&tcb1_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + };Documentation/devicetree/bindings/timer/atmel,tcb-timer.yaml new file +19
-0@@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/timer/atmel,tcb-timer.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Atmel Timer Counter Block timer channel + +maintainers: + - Alexandre Belloni <[email protected]> + +description: | + The Atmel (now Microchip) Timer Counter Block have multiple channels that can + be used as timers. + +properties: + compatible: + const: atmel,tcb-timer + reg:
Documentation/devicetree/bindings/timer/atmel,tcb-timer.yaml line 29
Quoted 10 lines
Documentation/devicetree/bindings/timer/atmel,tcb-timer.yaml new file +10
-0+ description: + List of channels to use for this particular timer. + minItems: 1 + maxItems: 3 + +required: + - compatible + - reg + +additionalProperties: false
This should just be merged into the 1st schema with this being defined as child nodes.
Quoted 25 lines
Documentation/devicetree/bindings/timer/atmel,tcb-timer.yaml new file +22
-0+ +examples: + - | + timer@fff7c000 { + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfff7c000 0x100>; + interrupts = <18 4>; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + };Signature · 1 line
2.25.2
Alexandre Belloni
maintainerPATCH v2 2/9 dt-bindings: microchip: atmel,at91rm9200-tcb: add sama5d2 compatible
In reply to Alexandre BelloniThe sama5d2 TC block TIMER_CLOCK1 is different from the at91sam9x5 one. Instead of being MCK / 2, it is the TCB GCLK.
---
Cc: Rob Herring <[email protected]>
.../soc/microchip/atmel,at91rm9200-tcb.yaml | 36 +++++++++++++++---- 1 file changed, 30 insertions(+), 6 deletions(-)
Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml +30 -6
@@ -19,6 +19,7 @@ properties: - enum: - atmel,at91rm9200-tcb - atmel,at91sam9x5-tcb + - atmel,sama5d2-tcb - const: simple-mfd - const: syscon
@@ -38,12 +39,6 @@ properties: t1_clk and t2_clk if a clock per channel is available. minItems: 2 maxItems: 4 - items: - enum: - - t0_clk - - t1_clk - - t2_clk - - slow_clk clocks: minItems: 2
@@ -55,6 +50,35 @@ properties: '#size-cells': const: 0 +allOf: + - if: + properties: + compatible: + contains: + const: atmel,sama5d2-tcb + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: t0_clk + - const: gclk + - const: slow_clk + else: + properties: + clocks: + minItems: 2 + maxItems: 4 + clock-names: + items: + enum: + - t0_clk + - t1_clk + - t2_clk + - slow_clk + required: - compatible - reg
Signature · 1 line
2.25.2
Alexandre Belloni
maintainerPATCH v2 3/9 ARM: dts: at91: sama5d2: add TCB GCLK
In reply to Alexandre BelloniThe sama5d2 tcbs take an extra input clock, their gclk.
--- arch/arm/boot/dts/sama5d2.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
arch/arm/boot/dts/sama5d2.dtsi +6 -6
@@ -499,23 +499,23 @@ macb0: ethernet@f8008000 { }; tcb0: timer@f800c000 { - compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon"; #address-cells = <1>; #size-cells = <0>; reg = <0xf800c000 0x100>; interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&clk32k>; - clock-names = "t0_clk", "slow_clk"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_GCK 35>, <&clk32k>; + clock-names = "t0_clk", "gclk", "slow_clk"; }; tcb1: timer@f8010000 { - compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon"; #address-cells = <1>; #size-cells = <0>; reg = <0xf8010000 0x100>; interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&clk32k>; - clock-names = "t0_clk", "slow_clk"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&pmc PMC_TYPE_GCK 36>, <&clk32k>; + clock-names = "t0_clk", "gclk", "slow_clk"; }; hsmc: hsmc@f8014000 {
Signature · 1 line
2.25.2
Alexandre Belloni
maintainerPATCH v2 4/9 ARM: at91: add atmel tcb capabilities
In reply to Alexandre BelloniFrom: Kamel Bouhara <[email protected]>
Some atmel socs have extra tcb capabilities that allow using a generic clock source or enabling a quadrature decoder.
--- include/soc/at91/atmel_tcb.h | 5 +++++ 1 file changed, 5 insertions(+)
include/soc/at91/atmel_tcb.h +5 -0
@@ -36,9 +36,14 @@ struct clk;/** * struct atmel_tcb_config - SoC data for a Timer/Counter Block * @counter_width: size in bits of a timer counter register +* @has_gclk: boolean indicating if a timer counter has a generic clock +* @has_qdec: boolean indicating if a timer counter has a quadrature +* decoder. */ struct atmel_tcb_config {size_t counter_width; +bool has_gclk; +bool has_qdec; };/**
Signature · 1 line
2.25.2
Alexandre Belloni
maintainerPATCH v2 5/9 clocksource/drivers/timer-atmel-tcb: rework 32khz clock selection
In reply to Alexandre BelloniOn all the supported SoCs, the slow clock is always ATMEL_TC_TIMER_CLOCK5, avoid looking it up and pass it directly to setup_clkevents.
--- drivers/clocksource/timer-atmel-tcb.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-)
drivers/clocksource/timer-atmel-tcb.c +2 -9
@@ -346,7 +346,7 @@ static void __init tcb_setup_single_chan(struct atmel_tc *tc, int mck_divisor_idwritel (ATMEL_TC_SYNC , tcaddr +ATMEL_TC_BCR ); } -static const u8 atmel_tcb_divisors[5 ] = {2 ,8 ,32 ,128 ,0 , }; +static const u8 atmel_tcb_divisors[] = {2 ,8 ,32 ,128 };static const struct of_device_id atmel_tcb_of_match[] = { { .compatible ="atmel,at91rm9200-tcb" , .data = (void *)16 , },
@@ -362,7 +362,6 @@ static int __init tcb_clksrc_init(struct device_node *node)u64 (*tc_sched_clock)(void);u32 rate, divided_rate =0 ;int best_divisor_idx =-1 ; -int clk32k_divisor_idx =-1 ;int bits;int i;int ret;
@@ -416,12 +415,6 @@ static int __init tcb_clksrc_init(struct device_node *node)unsigned divisor = atmel_tcb_divisors[i];unsigned tmp; -/* remember 32 KiHz clock for later */ -if (!divisor) { - clk32k_divisor_idx = i; -continue ; - } - tmp = rate / divisor;pr_debug ("TC: %u / %-3u [%d] --> %u\n" , rate, divisor, i, tmp);if (best_divisor_idx >0 ) {
@@ -467,7 +460,7 @@ static int __init tcb_clksrc_init(struct device_node *node) goto err_disable_t1;/* channel 2: periodic and oneshot timer support */ - ret =setup_clkevents (&tc, clk32k_divisor_idx); + ret =setup_clkevents (&tc,ATMEL_TC_TIMER_CLOCK5 );if (ret) goto err_unregister_clksrc;
Signature · 7 lines
2.25.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Alexandre Belloni
maintainerPATCH v2 6/9 clocksource/drivers/timer-atmel-tcb: fill tcb_config
In reply to Alexandre BelloniUse the tcb_config and struct atmel_tcb_config to get the timer counter width. This is necessary because atmel_tcb_config will be extended later on.
--- drivers/clocksource/timer-atmel-tcb.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-)
drivers/clocksource/timer-atmel-tcb.c +15 -3
@@ -348,9 +348,17 @@ static void __init tcb_setup_single_chan(struct atmel_tc *tc, int mck_divisor_idstatic const u8 atmel_tcb_divisors[] = {2 ,8 ,32 ,128 }; +static struct atmel_tcb_config tcb_rm9200_config = { + .counter_width =16 , +}; + +static struct atmel_tcb_config tcb_sam9x5_config = { + .counter_width =32 , +}; +static const struct of_device_id atmel_tcb_of_match[] = { - { .compatible ="atmel,at91rm9200-tcb" , .data = (void *)16 , }, - { .compatible ="atmel,at91sam9x5-tcb" , .data = (void *)32 , }, + { .compatible ="atmel,at91rm9200-tcb" , .data = &tcb_rm9200_config, }, + { .compatible ="atmel,at91sam9x5-tcb" , .data = &tcb_sam9x5_config, }, {/* sentinel */ } };
@@ -398,7 +406,11 @@ static int __init tcb_clksrc_init(struct device_node *node) } match =of_match_node (atmel_tcb_of_match, node->parent); - bits = (uintptr_t )match->data; +if (!match) +return -ENODEV ; + + tc.tcb_config = match->data; + bits = tc.tcb_config->counter_width;for (i =0 ; i <ARRAY_SIZE (tc.irq); i++)writel (ATMEL_TC_ALL_IRQ , tc.regs +ATMEL_TC_REG (i,IDR ));
Signature · 7 lines
2.25.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Alexandre Belloni
maintainerPATCH v2 7/9 clocksource/drivers/timer-atmel-tcb: stop using the 32kHz for clockevents
In reply to Alexandre BelloniStop using the slow clock as the clock source for 32 bit counters because even at 10MHz, they are able to handle delays up to two minutes. This provides a way better resolution.
--- drivers/clocksource/timer-atmel-tcb.c | 61 ++++++++++++++------------- 1 file changed, 32 insertions(+), 29 deletions(-)
drivers/clocksource/timer-atmel-tcb.c +32 -29
@@ -27,9 +27,10 @@* - Some chips support 32 bit counter. A single channel is used for * this 32 bit free-running counter. the second channel is not used. * -* - The third channel may be used to provide a 16-bit clockevent -* source, used in either periodic or oneshot mode. This runs -* at 32 KiHZ, and can handle delays of up to two seconds. +* - The third channel may be used to provide a clockevent source, used in +* either periodic or oneshot mode. For 16-bit counter its runs at 32 KiHZ, +* and can handle delays of up to two seconds. For 32-bit counters, it runs at +* the same rate as the clocksource * * REVISIT behavior during system suspend states... we should disable * all clocks and save the power. Easily done for clockevent devices,
@@ -47,6 +48,8 @@ static struct } tcb_cache[3 ];static u32 bmr_cache; +static const u8 atmel_tcb_divisors[] = {2 ,8 ,32 ,128 }; +static u64 tc_get_cycles (struct clocksource *cs) {unsigned long flags;
@@ -151,13 +154,6 @@ static struct tc_clkevt_device *to_tc_clkevt(struct clock_event_device *clkevt) return container_of(clkevt, struct tc_clkevt_device, clkevt); } -/* For now, we always use the 32K clock ... this optimizes for NO_HZ, -* because using one of the divided clocks would usually mean the -* tick rate can never be less than several dozen Hz (vs 0.5 Hz). -* -* A divided clock could be good for high resolution timers, since -* 30.5 usec resolution can seem "low". -*/ static u32 timer_clock;static int tc_shutdown (struct clock_event_device *d)
@@ -183,7 +179,7 @@ static int tc_set_oneshot(struct clock_event_device *d)clk_enable (tcd->clk); -/* slow clock, count up to RC, then irq and stop */ +/* count up to RC, then irq and stop */ writel (timer_clock |ATMEL_TC_CPCSTOP |ATMEL_TC_WAVE |ATMEL_TC_WAVESEL_UP_AUTO , regs +ATMEL_TC_REG (2 ,CMR ));writel (ATMEL_TC_CPCS , regs +ATMEL_TC_REG (2 ,IER ));
@@ -205,7 +201,7 @@ static int tc_set_periodic(struct clock_event_device *d)*/ clk_enable (tcd->clk); -/* slow clock, count up to RC, then irq and restart */ +/* count up to RC, then irq and restart */ writel (timer_clock |ATMEL_TC_WAVE |ATMEL_TC_WAVESEL_UP_AUTO , regs +ATMEL_TC_REG (2 ,CMR ));writel ((32768 +HZ /2 ) /HZ , tcaddr +ATMEL_TC_REG (2 ,RC ));
@@ -256,47 +252,56 @@ static irqreturn_t ch2_irq(int irq, void *handle)return IRQ_NONE ; } -static int __init setup_clkevents (struct atmel_tc *tc,int clk32k_divisor_idx) +static int __init setup_clkevents (struct atmel_tc *tc,int divisor_idx) { +u32 rate;int ret;struct clk *t2_clk = tc->clk[2 ];int irq = tc->irq[2 ]; - - ret =clk_prepare_enable (tc->slow_clk); -if (ret) -return ret; +int bits = tc->tcb_config->counter_width;/* try to enable t2 clk to avoid future errors in mode change */ ret =clk_prepare_enable (t2_clk); -if (ret) { -clk_disable_unprepare (tc->slow_clk); +if (ret)return ret; - } - -clk_disable (t2_clk); clkevt.regs = tc->regs; clkevt.clk = t2_clk; - timer_clock = clk32k_divisor_idx; +if (bits ==32 ) { + timer_clock = divisor_idx; + rate =clk_get_rate (t2_clk) / atmel_tcb_divisors[divisor_idx]; + }else { + ret =clk_prepare_enable (tc->slow_clk); +if (ret) { +clk_disable_unprepare (t2_clk); +return ret; + } + + rate =clk_get_rate (tc->slow_clk); + timer_clock =ATMEL_TC_TIMER_CLOCK5 ; + } + +clk_disable (t2_clk); clkevt.clkevt.cpumask =cpumask_of (0 ); ret =request_irq (irq, ch2_irq,IRQF_TIMER ,"tc_clkevt" , &clkevt);if (ret) {clk_unprepare (t2_clk); -clk_disable_unprepare (tc->slow_clk); +if (bits !=32 ) +clk_disable_unprepare (tc->slow_clk);return ret; } -clockevents_config_and_register (&clkevt.clkevt,32768 ,1 ,0xffff ); +clockevents_config_and_register (&clkevt.clkevt, rate,1 ,BIT (bits) -1 );return ret; }#else /* !CONFIG_GENERIC_CLOCKEVENTS */ -static int __init setup_clkevents (struct atmel_tc *tc,int clk32k_divisor_idx) +static int __init setup_clkevents (struct atmel_tc *tc,int divisor_idx) {/* NOTHING */ return 0 ;
@@ -346,8 +351,6 @@ static void __init tcb_setup_single_chan(struct atmel_tc *tc, int mck_divisor_idwritel (ATMEL_TC_SYNC , tcaddr +ATMEL_TC_BCR ); } -static const u8 atmel_tcb_divisors[] = {2 ,8 ,32 ,128 }; -static struct atmel_tcb_config tcb_rm9200_config = { .counter_width =16 , };
@@ -472,7 +475,7 @@ static int __init tcb_clksrc_init(struct device_node *node) goto err_disable_t1;/* channel 2: periodic and oneshot timer support */ - ret =setup_clkevents (&tc,ATMEL_TC_TIMER_CLOCK5 ); + ret =setup_clkevents (&tc, best_divisor_idx);if (ret) goto err_unregister_clksrc;
Signature · 1 line
2.25.2
Alexandre Belloni
maintainerPATCH v2 8/9 clocksource/drivers/timer-atmel-tcb: allow selecting first divider
In reply to Alexandre BelloniThe divider selection algorithm never allowed to get index 0. It was also continuing to look for dividers, trying to find the slow clock selection. This is not necessary anymore.
--- drivers/clocksource/timer-atmel-tcb.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/clocksource/timer-atmel-tcb.c +2 -4
@@ -432,10 +432,8 @@ static int __init tcb_clksrc_init(struct device_node *node) tmp = rate / divisor;pr_debug ("TC: %u / %-3u [%d] --> %u\n" , rate, divisor, i, tmp); -if (best_divisor_idx >0 ) { -if (tmp <5 *1000 *1000 ) -continue ; - } +if ((best_divisor_idx >=0 ) && (tmp <5 *1000 *1000 )) +break ; divided_rate = tmp; best_divisor_idx = i; }
Signature · 1 line
2.25.2
Alexandre Belloni
maintainerPATCH v2 9/9 clocksource/drivers/timer-atmel-tcb: add sama5d2 support
In reply to Alexandre BelloniThe first divisor for the sama5d2 is actually the gclk selector. Because the currently remaining divisors are fitting the use case, currently ensure it is skipped.
--- drivers/clocksource/timer-atmel-tcb.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/clocksource/timer-atmel-tcb.c +10 -1
@@ -359,9 +359,15 @@ static struct atmel_tcb_config tcb_sam9x5_config = { .counter_width = 32, }; +static struct atmel_tcb_config tcb_sama5d2_config = { + .counter_width =32 , + .has_gclk =1 , +}; +static const struct of_device_id atmel_tcb_of_match[] = { { .compatible ="atmel,at91rm9200-tcb" , .data = &tcb_rm9200_config, }, { .compatible ="atmel,at91sam9x5-tcb" , .data = &tcb_sam9x5_config, }, + { .compatible ="atmel,sama5d2-tcb" , .data = &tcb_sama5d2_config, }, {/* sentinel */ } };
@@ -426,7 +432,10 @@ static int __init tcb_clksrc_init(struct device_node *node)/* How fast will we be counting? Pick something over 5 MHz. */ rate = (u32 )clk_get_rate (t0_clk); -for (i =0 ; i <ARRAY_SIZE (atmel_tcb_divisors); i++) { + i =0 ; +if (tc.tcb_config->has_gclk) + i =1 ; +for (; i <ARRAY_SIZE (atmel_tcb_divisors); i++) {unsigned divisor = atmel_tcb_divisors[i];unsigned tmp;
Signature · 1 line
2.25.2