Skip to contentSkip to conversation

LUKS2 cleanups

PATCH In review Patrick Steinhardt 2 participants 10 messages Apr 7, 2020 – Apr 16, 2020

lore
Share & tools
lore
#0 lore raw

cover LUKS2 cleanups

Hi,

here's two small improvements for LUKS2 support:

- The first patch introduces better error reporting, as I've noticed it's quite hard to determine why decryption failed in case there's any misconfiguration.

- The second is a result of my upstream pull request in jsmn, which got accepted last week. As a result, we can now remove all the jmntok_t casts in our json library.

Patrick

Patrick Steinhardt (2):
luks2: Improve error reporting when decrypting/verifying key
json: Update jsmn library to get rid of casts

 grub-core/disk/luks2.c    | 8 +++++---
 grub-core/lib/json/jsmn.h | 7 +++++--
 grub-core/lib/json/json.c | 8 ++++----
 grub-core/lib/json/json.h | 4 +++-
 4 files changed, 17 insertions(+), 10 deletions(-)
Signature · 1 line
2.26.0
#1 lore raw

PATCH 1/2 luks2: Improve error reporting when decrypting/verifying key

While we already set up error messages in both luks2_verify_key() and luks2_decrypt_key(), we do not ever print them. This makes it really hard to discover why a given key actually failed to decrypt a disk.

Improve this by including the error message in the user-visible output.

---
 grub-core/disk/luks2.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
grub-core/disk/luks2.c +5 -3
index 65c4f0aac..58ac7bae1 100644
@@ -487,7 +487,7 @@ luks2_decrypt_key (grub_uint8_t *out_key,
   ret = grub_disk_read (disk, 0, k->area.offset, k->area.size, split_key);
   if (ret)
     {
-      grub_dprintf ("luks2", "Read error: %s\n", grub_errmsg);
+      grub_error (GRUB_ERR_IO, "luks2", "Read error: %s\n", grub_errmsg);
       goto err;
     }
 
@@ -610,14 +610,16 @@ luks2_recover_key (grub_disk_t disk,
 			       (const grub_uint8_t *) passphrase, grub_strlen (passphrase));
       if (ret)
 	{
-	  grub_dprintf ("luks2", "Decryption with keyslot %"PRIuGRUB_SIZE" failed\n", i);
+	  grub_dprintf ("luks2", "Decryption with keyslot %"PRIuGRUB_SIZE" failed: %s\n",
+			i, grub_errmsg);
 	  continue;
 	}
 
       ret = luks2_verify_key (&digest, candidate_key, keyslot.key_size);
       if (ret)
 	{
-	  grub_dprintf ("luks2", "Could not open keyslot %"PRIuGRUB_SIZE"\n", i);
+	  grub_dprintf ("luks2", "Could not open keyslot %"PRIuGRUB_SIZE": %s\n",
+			i, grub_errmsg);
 	  continue;
 	}
 
Signature · 1 line
2.26.0
#2 lore raw

Re: [PATCH 1/2] luks2: Improve error reporting when decrypting/verifying key

Quoted 14 lines · Patrick Steinhardt

While we already set up error messages in both luks2_verify_key() and luks2_decrypt_key(), we do not ever print them. This makes it really hard to discover why a given key actually failed to decrypt a disk.

Improve this by including the error message in the user-visible output.

---
 grub-core/disk/luks2.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
grub-core/disk/luks2.c +0 -0
index 65c4f0aac..58ac7bae1 100644

grub-core/disk/luks2.c luks2_decrypt_key (grub_uint8_t *out_key, · line 490

Quoted 5 lines
grub-core/disk/luks2.c +1 -1
@@ -487,7 +487,7 @@ luks2_decrypt_key (grub_uint8_t *out_key,
   ret = grub_disk_read (disk, 0, k->area.offset, k->area.size, split_key);
   if (ret)
     {
-      grub_dprintf ("luks2", "Read error: %s\n", grub_errmsg);
+      grub_error (GRUB_ERR_IO, "luks2", "Read error: %s\n", grub_errmsg);

I think that you should drop "luks2" here.

Quoted 9 lines
grub-core/disk/luks2.c +1 -1
       goto err;
     }
 
@@ -610,14 +610,16 @@ luks2_recover_key (grub_disk_t disk,
 			       (const grub_uint8_t *) passphrase, grub_strlen (passphrase));
       if (ret)
 	{
-	  grub_dprintf ("luks2", "Decryption with keyslot %"PRIuGRUB_SIZE" failed\n", i);
+	  grub_dprintf ("luks2", "Decryption with keyslot %"PRIuGRUB_SIZE" failed: %s\n",

grub-core/disk/luks2.c luks2_recover_key (grub_disk_t disk, · line 622

Quoted 10 lines
grub-core/disk/luks2.c +3 -1
+			i, grub_errmsg);
 	  continue;
 	}
 
       ret = luks2_verify_key (&digest, candidate_key, keyslot.key_size);
       if (ret)
 	{
-	  grub_dprintf ("luks2", "Could not open keyslot %"PRIuGRUB_SIZE"\n", i);
+	  grub_dprintf ("luks2", "Could not open keyslot %"PRIuGRUB_SIZE": %s\n",
+			i, grub_errmsg);

This messages will be printed only if debugging is enabled. Is it what you expect?

Daniel

#3 lore raw

Re: [PATCH 1/2] luks2: Improve error reporting when decrypting/verifying key

Quoted 10 lines · Daniel Kiper
Quoted 9 lines · Patrick Steinhardt

While we already set up error messages in both luks2_verify_key() and luks2_decrypt_key(), we do not ever print them. This makes it really hard to discover why a given key actually failed to decrypt a disk.

Improve this by including the error message in the user-visible output.

---
 grub-core/disk/luks2.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
Quoted 12 lines

grub-core/disk/luks2.c luks2_decrypt_key (grub_uint8_t *out_key, · line 490

Quoted 10 lines
grub-core/disk/luks2.c +1 -1
index 65c4f0aac..58ac7bae1 100644
@@ -487,7 +487,7 @@ luks2_decrypt_key (grub_uint8_t *out_key,
   ret = grub_disk_read (disk, 0, k->area.offset, k->area.size, split_key);
   if (ret)
     {
-      grub_dprintf ("luks2", "Read error: %s\n", grub_errmsg);
+      grub_error (GRUB_ERR_IO, "luks2", "Read error: %s\n", grub_errmsg);

I think that you should drop "luks2" here.

Oops, yes, obviously.

Quoted 13 lines
Quoted 13 lines
grub-core/disk/luks2.c +2 -1
       goto err;
     }
 
@@ -610,14 +610,16 @@ luks2_recover_key (grub_disk_t disk,
 			       (const grub_uint8_t *) passphrase, grub_strlen (passphrase));
       if (ret)
 	{
-	  grub_dprintf ("luks2", "Decryption with keyslot %"PRIuGRUB_SIZE" failed\n", i);
+	  grub_dprintf ("luks2", "Decryption with keyslot %"PRIuGRUB_SIZE" failed: %s\n",
+			i, grub_errmsg);
 	  continue;
 	}
 
Quoted 9 lines

grub-core/disk/luks2.c luks2_recover_key (grub_disk_t disk, · line 622

Quoted 6 lines
grub-core/disk/luks2.c +2 -1
       ret = luks2_verify_key (&digest, candidate_key, keyslot.key_size);
       if (ret)
 	{
-	  grub_dprintf ("luks2", "Could not open keyslot %"PRIuGRUB_SIZE"\n", i);
+	  grub_dprintf ("luks2", "Could not open keyslot %"PRIuGRUB_SIZE": %s\n",
+			i, grub_errmsg);

This messages will be printed only if debugging is enabled. Is it what you expect?

Well, I'm honestly not quite sure. The thing is that we potentially have a number of different keyslots, not only one. So when we try keyslots in turn, it's not unexpected for the first n-1 keyslots to not work if the nth keyslot is the one we're trying to unlock.

The above is probably just an edge case as I expect most users to use a single keyslot, only. And in that case it would probably we useful to always print those messages, not only in case debugging is turned on.

What do you think?

Patrick

#4 lore raw

Re: [PATCH 1/2] luks2: Improve error reporting when decrypting/verifying key

Quoted 54 lines · Patrick Steinhardt
Quoted 10 lines · Daniel Kiper
Quoted 9 lines · Patrick Steinhardt

While we already set up error messages in both luks2_verify_key() and luks2_decrypt_key(), we do not ever print them. This makes it really hard to discover why a given key actually failed to decrypt a disk.

Improve this by including the error message in the user-visible output.

---
 grub-core/disk/luks2.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
Quoted 12 lines

grub-core/disk/luks2.c luks2_decrypt_key (grub_uint8_t *out_key, · line 490

Quoted 10 lines
grub-core/disk/luks2.c +1 -1
index 65c4f0aac..58ac7bae1 100644
@@ -487,7 +487,7 @@ luks2_decrypt_key (grub_uint8_t *out_key,
   ret = grub_disk_read (disk, 0, k->area.offset, k->area.size, split_key);
   if (ret)
     {
-      grub_dprintf ("luks2", "Read error: %s\n", grub_errmsg);
+      grub_error (GRUB_ERR_IO, "luks2", "Read error: %s\n", grub_errmsg);

I think that you should drop "luks2" here.

Oops, yes, obviously.

Quoted 13 lines
Quoted 13 lines
grub-core/disk/luks2.c +2 -1
       goto err;
     }
 
@@ -610,14 +610,16 @@ luks2_recover_key (grub_disk_t disk,
 			       (const grub_uint8_t *) passphrase, grub_strlen (passphrase));
       if (ret)
 	{
-	  grub_dprintf ("luks2", "Decryption with keyslot %"PRIuGRUB_SIZE" failed\n", i);
+	  grub_dprintf ("luks2", "Decryption with keyslot %"PRIuGRUB_SIZE" failed: %s\n",
+			i, grub_errmsg);
 	  continue;
 	}
 
Quoted 9 lines

grub-core/disk/luks2.c luks2_recover_key (grub_disk_t disk, · line 622

Quoted 6 lines
grub-core/disk/luks2.c +2 -1
       ret = luks2_verify_key (&digest, candidate_key, keyslot.key_size);
       if (ret)
 	{
-	  grub_dprintf ("luks2", "Could not open keyslot %"PRIuGRUB_SIZE"\n", i);
+	  grub_dprintf ("luks2", "Could not open keyslot %"PRIuGRUB_SIZE": %s\n",
+			i, grub_errmsg);

This messages will be printed only if debugging is enabled. Is it what you expect?

Well, I'm honestly not quite sure. The thing is that we potentially have a number of different keyslots, not only one. So when we try keyslots in turn, it's not unexpected for the first n-1 keyslots to not work if the nth keyslot is the one we're trying to unlock.

Quoted 5 lines

The above is probably just an edge case as I expect most users to use a single keyslot, only. And in that case it would probably we useful to always print those messages, not only in case debugging is turned on.

What do you think?

Should not we print an error unconditionally if all n slots failed? Then user will know that decryption is not possible but will not be bothered by subsequent keyslot failures. However, I would still print error for each keyslot if debugging is enabled. Then if you have some problems you can enable debugging and see which keyslots fail. Does it make sense?

Daniel

#5 lore raw

Re: [PATCH 1/2] luks2: Improve error reporting when decrypting/verifying key

Quoted 61 lines · Daniel Kiper
Quoted 54 lines · Patrick Steinhardt
Quoted 10 lines · Daniel Kiper
Quoted 9 lines · Patrick Steinhardt

While we already set up error messages in both luks2_verify_key() and luks2_decrypt_key(), we do not ever print them. This makes it really hard to discover why a given key actually failed to decrypt a disk.

Improve this by including the error message in the user-visible output.

---
 grub-core/disk/luks2.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
Quoted 12 lines

grub-core/disk/luks2.c luks2_decrypt_key (grub_uint8_t *out_key, · line 490

Quoted 10 lines
grub-core/disk/luks2.c +1 -1
index 65c4f0aac..58ac7bae1 100644
@@ -487,7 +487,7 @@ luks2_decrypt_key (grub_uint8_t *out_key,
   ret = grub_disk_read (disk, 0, k->area.offset, k->area.size, split_key);
   if (ret)
     {
-      grub_dprintf ("luks2", "Read error: %s\n", grub_errmsg);
+      grub_error (GRUB_ERR_IO, "luks2", "Read error: %s\n", grub_errmsg);

I think that you should drop "luks2" here.

Oops, yes, obviously.

Quoted 13 lines
Quoted 13 lines
grub-core/disk/luks2.c +2 -1
       goto err;
     }
 
@@ -610,14 +610,16 @@ luks2_recover_key (grub_disk_t disk,
 			       (const grub_uint8_t *) passphrase, grub_strlen (passphrase));
       if (ret)
 	{
-	  grub_dprintf ("luks2", "Decryption with keyslot %"PRIuGRUB_SIZE" failed\n", i);
+	  grub_dprintf ("luks2", "Decryption with keyslot %"PRIuGRUB_SIZE" failed: %s\n",
+			i, grub_errmsg);
 	  continue;
 	}
 
Quoted 9 lines

grub-core/disk/luks2.c luks2_recover_key (grub_disk_t disk, · line 622

Quoted 6 lines
grub-core/disk/luks2.c +2 -1
       ret = luks2_verify_key (&digest, candidate_key, keyslot.key_size);
       if (ret)
 	{
-	  grub_dprintf ("luks2", "Could not open keyslot %"PRIuGRUB_SIZE"\n", i);
+	  grub_dprintf ("luks2", "Could not open keyslot %"PRIuGRUB_SIZE": %s\n",
+			i, grub_errmsg);

This messages will be printed only if debugging is enabled. Is it what you expect?

Well, I'm honestly not quite sure. The thing is that we potentially have a number of different keyslots, not only one. So when we try keyslots in turn, it's not unexpected for the first n-1 keyslots to not work if the nth keyslot is the one we're trying to unlock.

Quoted 5 lines

The above is probably just an edge case as I expect most users to use a single keyslot, only. And in that case it would probably we useful to always print those messages, not only in case debugging is turned on.

What do you think?

Quoted 8 lines

Should not we print an error unconditionally if all n slots failed? Then user will know that decryption is not possible but will not be bothered by subsequent keyslot failures. However, I would still print error for each keyslot if debugging is enabled. Then if you have some problems you can enable debugging and see which keyslots fail. Does it make sense?

Daniel

Okay, so that's exactly how it works right now: in case no slot succeeds, we print "Invalid passphrase" to let the user know about it. If he turns on debugging, he'll see why each of the individual keyslots has failed, and this patch only increases the verbosity to actually include useful information.

I'll resend this patch separate from the jsmn updates with the SOB and the above fix for grub_error().

Patrick

#6 lore raw

PATCH 2/2 json: Update jsmn library to get rid of casts

In reply to Patrick Steinhardt

Update our embedded version of the jsmn library to upstream commit 053d3cd (Merge pull request #175 from pks-t/pks/struct-type, 2020-04-02). The update adds a name for the jsmntok struct, which allows us to add a forward declaration for the struct's typedef. As a result, we can now convert the void * tokens member of struct grub_json to jsmntok_t * and remove all casts.

---
 grub-core/lib/json/jsmn.h | 7 +++++--
 grub-core/lib/json/json.c | 8 ++++----
 grub-core/lib/json/json.h | 4 +++-
 3 files changed, 12 insertions(+), 7 deletions(-)
grub-core/lib/json/jsmn.h +5 -2
index b95368a20..3178dcc97 100644
@@ -66,7 +66,7 @@ enum jsmnerr {
  * start	start position in JSON data string
  * end		end position in JSON data string
  */
-typedef struct {
+typedef struct jsmntok {
   jsmntype_t type;
   int start;
   int end;
@@ -80,7 +80,7 @@ typedef struct {
  * JSON parser. Contains an array of token blocks available. Also stores
  * the string being parsed now and current position in that string.
  */
-typedef struct {
+typedef struct jsmn_parser {
   unsigned int pos;     /* offset in the JSON string */
   unsigned int toknext; /* next token to allocate */
   int toksuper;         /* superior token node, e.g. parent object or array */
@@ -154,6 +154,9 @@ static int jsmn_parse_primitive(jsmn_parser *parser, const char *js,
     case ']':
     case '}':
       goto found;
+    default:
+                   /* to quiet a warning from gcc*/
+      break;
     }
     if (js[parser->pos] < 32 || js[parser->pos] >= 127) {
       parser->pos = start;
grub-core/lib/json/json.c +4 -4
index 15c0d9949..694af4f3a 100644
@@ -95,7 +95,7 @@ grub_json_getsize (grub_size_t *out, const grub_json_t *json)
 {
   int size;
 
-  size = ((jsmntok_t *)json->tokens)[json->idx].size;
+  size = json->tokens[json->idx].size;
   if (size < 0)
     return GRUB_ERR_OUT_OF_RANGE;
 
@@ -106,7 +106,7 @@ grub_json_getsize (grub_size_t *out, const grub_json_t *json)
 grub_err_t
 grub_json_gettype (grub_json_type_t *out, const grub_json_t *json)
 {
-  switch (((jsmntok_t *)json->tokens)[json->idx].type)
+  switch (json->tokens[json->idx].type)
     {
     case JSMN_OBJECT:
       *out = GRUB_JSON_OBJECT;
@@ -142,7 +142,7 @@ grub_json_getchild (grub_json_t *out, const grub_json_t *parent, grub_size_t n)
    * array), as well. We thus add the children's size to n on
    * each iteration.
    */
-  p = &((jsmntok_t *)parent->tokens)[parent->idx];
+  p = &parent->tokens[parent->idx];
   while (n--)
     n += p[offset++].size;
 
@@ -197,7 +197,7 @@ get_value (grub_json_type_t *out_type, const char **out_string, const grub_json_
       p = &child;
     }
 
-  tok = &((jsmntok_t *) p->tokens)[p->idx];
+  tok = &p->tokens[p->idx];
   p->string[tok->end] = '\0';
 
   *out_string = p->string + tok->start;
grub-core/lib/json/json.h +3 -1
index 358e4bca3..d9f99454d 100644
@@ -36,9 +36,11 @@ enum grub_json_type
 };
 typedef enum grub_json_type grub_json_type_t;
 
+typedef struct jsmntok jsmntok_t;
+
 struct grub_json
 {
-  void	      *tokens;
+  jsmntok_t   *tokens;
   char	      *string;
   grub_size_t idx;
 };
Signature · 1 line
2.26.0
#7 lore raw

Re: [PATCH 2/2] json: Update jsmn library to get rid of casts

Quoted 6 lines · Patrick Steinhardt

Update our embedded version of the jsmn library to upstream commit 053d3cd (Merge pull request #175 from pks-t/pks/struct-type, 2020-04-02). The update adds a name for the jsmntok struct, which allows us to add a forward declaration for the struct's typedef. As a result, we can now convert the void * tokens member of struct grub_json to jsmntok_t * and remove all casts.

Missing SOB...

Quoted 20 lines
---
 grub-core/lib/json/jsmn.h | 7 +++++--
 grub-core/lib/json/json.c | 8 ++++----
 grub-core/lib/json/json.h | 4 +++-
 3 files changed, 12 insertions(+), 7 deletions(-)
grub-core/lib/json/jsmn.h +1 -1
index b95368a20..3178dcc97 100644
@@ -66,7 +66,7 @@ enum jsmnerr {
  * start	start position in JSON data string
  * end		end position in JSON data string
  */
-typedef struct {
+typedef struct jsmntok {
   jsmntype_t type;
   int start;
   int end;

grub-core/lib/json/jsmn.h typedef struct { · line 83

Quoted 5 lines
grub-core/lib/json/jsmn.h +1 -1
@@ -80,7 +80,7 @@ typedef struct {
  * JSON parser. Contains an array of token blocks available. Also stores
  * the string being parsed now and current position in that string.
  */
-typedef struct {
+typedef struct jsmn_parser {

Commit message says about jsmntok only. Here you add jsmn_parser too. If it is needed then it should go into separate patch.

grub-core/lib/json/jsmn.h static int jsmn_parse_primitive(jsmn_parser *parser, const char *js, · line 159

Quoted 10 lines
grub-core/lib/json/jsmn.h +3 -0
   unsigned int pos;     /* offset in the JSON string */
   unsigned int toknext; /* next token to allocate */
   int toksuper;         /* superior token node, e.g. parent object or array */
@@ -154,6 +154,9 @@ static int jsmn_parse_primitive(jsmn_parser *parser, const char *js,
     case ']':
     case '}':
       goto found;
+    default:
+                   /* to quiet a warning from gcc*/
+      break;

It seems to me that this belongs to separate patch.

Quoted 48 lines
grub-core/lib/json/jsmn.h +0 -0
     }
     if (js[parser->pos] < 32 || js[parser->pos] >= 127) {
       parser->pos = start;
grub-core/lib/json/json.c +4 -4
index 15c0d9949..694af4f3a 100644
@@ -95,7 +95,7 @@ grub_json_getsize (grub_size_t *out, const grub_json_t *json)
 {
   int size;
 
-  size = ((jsmntok_t *)json->tokens)[json->idx].size;
+  size = json->tokens[json->idx].size;
   if (size < 0)
     return GRUB_ERR_OUT_OF_RANGE;
 
@@ -106,7 +106,7 @@ grub_json_getsize (grub_size_t *out, const grub_json_t *json)
 grub_err_t
 grub_json_gettype (grub_json_type_t *out, const grub_json_t *json)
 {
-  switch (((jsmntok_t *)json->tokens)[json->idx].type)
+  switch (json->tokens[json->idx].type)
     {
     case JSMN_OBJECT:
       *out = GRUB_JSON_OBJECT;
@@ -142,7 +142,7 @@ grub_json_getchild (grub_json_t *out, const grub_json_t *parent, grub_size_t n)
    * array), as well. We thus add the children's size to n on
    * each iteration.
    */
-  p = &((jsmntok_t *)parent->tokens)[parent->idx];
+  p = &parent->tokens[parent->idx];
   while (n--)
     n += p[offset++].size;
 
@@ -197,7 +197,7 @@ get_value (grub_json_type_t *out_type, const char **out_string, const grub_json_
       p = &child;
     }
 
-  tok = &((jsmntok_t *) p->tokens)[p->idx];
+  tok = &p->tokens[p->idx];
   p->string[tok->end] = '\0';
 
   *out_string = p->string + tok->start;
grub-core/lib/json/json.h +0 -0
index 358e4bca3..d9f99454d 100644

grub-core/lib/json/json.h enum grub_json_type · line 44

Quoted 10 lines
grub-core/lib/json/json.h +3 -1
@@ -36,9 +36,11 @@ enum grub_json_type
 };
 typedef enum grub_json_type grub_json_type_t;
 
+typedef struct jsmntok jsmntok_t;
+
 struct grub_json
 {
-  void	      *tokens;
+  jsmntok_t   *tokens;
   char	      *string;

Something is messed up with tabs and spaces here...

Daniel

#8 lore raw

Re: [PATCH 2/2] json: Update jsmn library to get rid of casts

Quoted 10 lines · Daniel Kiper

grub-core/lib/json/jsmn.h typedef struct { · line 83

Quoted 6 lines · Patrick Steinhardt
grub-core/lib/json/jsmn.h +1 -1
@@ -80,7 +80,7 @@ typedef struct {
  * JSON parser. Contains an array of token blocks available. Also stores
  * the string being parsed now and current position in that string.
  */
-typedef struct {
+typedef struct jsmn_parser {

Commit message says about jsmntok only. Here you add jsmn_parser too. If it is needed then it should go into separate patch.

Note that this is pulled in by the upgrade to the newer jsmn library, bringing in not only the changes I want to make sure of.

Quoted 4 lines
Quoted 4 lines
grub-core/lib/json/jsmn.h +0 -0
   unsigned int pos;     /* offset in the JSON string */
   unsigned int toknext; /* next token to allocate */
   int toksuper;         /* superior token node, e.g. parent object or array */
@@ -154,6 +154,9 @@ static int jsmn_parse_primitive(jsmn_parser *parser, const char *js,
Quoted 8 lines

grub-core/lib/json/jsmn.h static int jsmn_parse_primitive(jsmn_parser *parser, const char *js, · line 159

Quoted 6 lines
grub-core/lib/json/jsmn.h +3 -0
     case ']':
     case '}':
       goto found;
+    default:
+                   /* to quiet a warning from gcc*/
+      break;

It seems to me that this belongs to separate patch.

See above. This is brought in by the update to 053d3cd. I could split this up into two parts, though. First the update of "jsmn.h", followed by our own changes in our wrapper. That would probably clear things up?

Patrick

#9 lore raw

Re: [PATCH 2/2] json: Update jsmn library to get rid of casts

Quoted 28 lines · Patrick Steinhardt
Quoted 10 lines · Daniel Kiper

grub-core/lib/json/jsmn.h typedef struct { · line 83

Quoted 6 lines · Patrick Steinhardt
grub-core/lib/json/jsmn.h +1 -1
@@ -80,7 +80,7 @@ typedef struct {
  * JSON parser. Contains an array of token blocks available. Also stores
  * the string being parsed now and current position in that string.
  */
-typedef struct {
+typedef struct jsmn_parser {

Commit message says about jsmntok only. Here you add jsmn_parser too. If it is needed then it should go into separate patch.

Note that this is pulled in by the upgrade to the newer jsmn library, bringing in not only the changes I want to make sure of.

Quoted 4 lines
Quoted 4 lines
grub-core/lib/json/jsmn.h +0 -0
   unsigned int pos;     /* offset in the JSON string */
   unsigned int toknext; /* next token to allocate */
   int toksuper;         /* superior token node, e.g. parent object or array */
@@ -154,6 +154,9 @@ static int jsmn_parse_primitive(jsmn_parser *parser, const char *js,
Quoted 8 lines

grub-core/lib/json/jsmn.h static int jsmn_parse_primitive(jsmn_parser *parser, const char *js, · line 159

Quoted 6 lines
grub-core/lib/json/jsmn.h +3 -0
     case ']':
     case '}':
       goto found;
+    default:
+                   /* to quiet a warning from gcc*/
+      break;

It seems to me that this belongs to separate patch.

Quoted 3 lines

See above. This is brought in by the update to 053d3cd. I could split this up into two parts, though. First the update of "jsmn.h", followed by our own changes in our wrapper. That would probably clear things up?

Yes, please split this patch into separate logical changes and post as a separate patchset with cover letter saying that this aligns the GRUB jsmn code with update 053d3cd.

Daniel