spi: spi-fsl-qspi: Reduce devm_ioremap size to 4 times AHB buffer size
Subsystems (2)
PATCH v3 1/1 spi: spi-fsl-qspi: Reduce devm_ioremap size to 4 times AHB buffer size
Reduce devm_ioremap size to (4 * AHB_BUFER_SIZE) rather than mapping complete QSPI-Memmory as driver is now independent of flash size. Flash of any size can be accessed.
Issue was reported on platform where devm_ioremap failure is observed with size > 256M.
Error log on LS1021ATWR :
fsl-quadspi 1550000.spi: ioremap failed for resource [mem 0x40000000-0x7fffffff] fsl-quadspi 1550000.spi: Freescale QuadSPI probe failed
fsl-quadspi: probe of 1550000.spi failed with error -12
This change was also suggested previously:
https://patchwork.kernel.org/patch/10508753/#22166385
---
v3:
Update comment
v2:
Add Suggested-by: Boris Brezillon <[email protected]> Incorrporate review comments from Frieder
drivers/spi/spi-fsl-qspi.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/spi/spi-fsl-qspi.c +4 -3
@@ -859,14 +859,15 @@ static int fsl_qspi_probe(struct platform_device *pdev) res =platform_get_resource_byname (pdev,IORESOURCE_MEM ,"QuadSPI-memory" ); - q->ahb_addr =devm_ioremap_resource (dev, res); + q->memmap_phy = res->start; +/* Since there are 4 cs, map size required is 4 times ahb_buf_size */ + q->ahb_addr =devm_ioremap (dev, q->memmap_phy, + (q->devtype_data->ahb_buf_size *4 ));if (IS_ERR (q->ahb_addr)) { ret =PTR_ERR (q->ahb_addr); goto err_put_ctrl; } - q->memmap_phy = res->start; -/* find the clocks */ q->clk_en =devm_clk_get (dev,"qspi_en" );if (IS_ERR (q->clk_en)) {
Signature · 1 line
2.7.4
Quoted 11 lines · Ashish Kumar
Reduce
devm_ioremapsize to (4 *AHB_BUFER_SIZE) rather than mapping complete QSPI-Memmory as driver is now independent of flash size. Flash of any size can be accessed.Issue was reported on platform where
devm_ioremapfailure is observed with size > 256M.
Error log on LS1021ATWR :
fsl-quadspi 1550000.spi: ioremap failed for resource [mem 0x40000000-0x7fffffff] fsl-quadspi 1550000.spi: Freescale QuadSPI probe failed
fsl-quadspi: probe of 1550000.spi failed with error -12
Quoted 6 lines
This change was also suggested previously:
https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.kernel.org%2Fpatch%2F10508753%2F%2322166385&data=02%7C01%7Cfrieder.schrempf%40kontron.de%7Cf2c2455908884198277708d7e1fb6146%7C8c9d3c973fd941c8a2b1646f3942daf1%7C0%7C0%7C637226342094777031&sdata=QeApGgupC4RwfbSnQLIXs41o7VYKK747NCrZzn%2FRZKQ%3D&reserved=0Suggested-by Boris Brezillon <[email protected]>Signed-off-by Kuldeep Singh <[email protected]>Signed-off-by Ashish Kumar <[email protected]>
Quoted 33 lines
---
v3:
Update comment
v2:
Add Suggested-by: Boris Brezillon <[email protected]> Incorrporate review comments from Friederdrivers/spi/spi-fsl-qspi.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)drivers/spi/spi-fsl-qspi.c +4
-3@@ -859,14 +859,15 @@ static int fsl_qspi_probe(struct platform_device *pdev) res =platform_get_resource_byname (pdev,IORESOURCE_MEM ,"QuadSPI-memory" ); - q->ahb_addr =devm_ioremap_resource (dev, res); + q->memmap_phy = res->start; +/* Since there are 4 cs, map size required is 4 times ahb_buf_size */ + q->ahb_addr =devm_ioremap (dev, q->memmap_phy, + (q->devtype_data->ahb_buf_size *4 ));if (IS_ERR (q->ahb_addr)) { ret =PTR_ERR (q->ahb_addr); goto err_put_ctrl; } - q->memmap_phy = res->start; -/* find the clocks */ q->clk_en =devm_clk_get (dev,"qspi_en" );if (IS_ERR (q->clk_en)) {
Quoted 36 lines · On Thu, 16 Apr 2020 17:13:19 +0530 Ashish Kumar <[email protected]> wrote:
Reduce
devm_ioremapsize to (4 *AHB_BUFER_SIZE) rather than mapping complete QSPI-Memmory as driver is now independent of flash size. Flash of any size can be accessed.Issue was reported on platform where
devm_ioremapfailure is observed with size > 256M.
Error log on LS1021ATWR :
fsl-quadspi 1550000.spi: ioremap failed for resource [mem 0x40000000-0x7fffffff] fsl-quadspi 1550000.spi: Freescale QuadSPI probe failed
fsl-quadspi: probe of 1550000.spi failed with error -12This change was also suggested previously:
https://patchwork.kernel.org/patch/10508753/#22166385Suggested-by Boris Brezillon <[email protected]>Signed-off-by Kuldeep Singh <[email protected]>Signed-off-by Ashish Kumar <[email protected]>---
v3:
Update comment
v2:
Add Suggested-by: Boris Brezillon <[email protected]> Incorrporate review comments from Friederdrivers/spi/spi-fsl-qspi.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)drivers/spi/spi-fsl-qspi.c +1
-1@@ -859,14 +859,15 @@ static int fsl_qspi_probe(struct platform_device *pdev) res =platform_get_resource_byname (pdev,IORESOURCE_MEM ,"QuadSPI-memory" ); - q->ahb_addr =devm_ioremap_resource (dev, res); + q->memmap_phy = res->start;
drivers/spi/spi-fsl-qspi.c static int fsl_qspi_probe(struct platform_device *pdev) · line 869
Quoted 10 lines
drivers/spi/spi-fsl-qspi.c +3
-2+/* Since there are 4 cs, map size required is 4 times ahb_buf_size */ + q->ahb_addr =devm_ioremap (dev, q->memmap_phy, + (q->devtype_data->ahb_buf_size *4 ));if (IS_ERR (q->ahb_addr)) { ret =PTR_ERR (q->ahb_addr); goto err_put_ctrl; } - q->memmap_phy = res->start; -
Looks like this line move is unrelated to the ioremap range change. Not a big but I thought I'd mention it. In any case,
Quoted 3 lines
drivers/spi/spi-fsl-qspi.c +0
-0/* find the clocks */ q->clk_en =devm_clk_get (dev,"qspi_en" );if (IS_ERR (q->clk_en)) {
Quoted 4 lines · Ashish Kumar
Reduce
devm_ioremapsize to (4 *AHB_BUFER_SIZE) rather than mapping complete QSPI-Memmory as driver is now independent of flash size. Flash of any size can be accessed.
Quoted 8 lines
Issue was reported on platform where
devm_ioremapfailure is observed with size > 256M.
Error log on LS1021ATWR :
fsl-quadspi 1550000.spi: ioremap failed for resource [mem 0x40000000-0x7fffffff] fsl-quadspi 1550000.spi: Freescale QuadSPI probe failed
fsl-quadspi: probe of 1550000.spi failed with error -12[...]
Applied, thanks!
[1/1] spi: spi-fsl-qspi: Reduce devm_ioremap size to 4 times AHB buffer size
commit: 858e26a515c28df3ef542d9c09493b54a329d6cf
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark