arm64: dts: rockchip: add bus-width properties to mmc nodes for px30.dtsi
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: add bus-width properties to mmc nodes for px30.dtsi
'bus-width' and pinctrl containing the bus-pins
should be in the same file, so add them to
all mmc nodes in 'px30.dtsi'.
Signed-off-by Johan Jonker <[email protected]>
--- arch/arm64/boot/dts/rockchip/px30.dtsi | 3 +++ 1 file changed, 3 insertions(+)
arch/arm64/boot/dts/rockchip/px30.dtsi +3 -0
@@ -928,6 +928,7 @@ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + bus-width = <4>; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default";
@@ -943,6 +944,7 @@ clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + bus-width = <4>; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default";
@@ -958,6 +960,7 @@ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + bus-width = <8>; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default";
Signature · 1 line
2.11.0
Quoted 3 lines · Johan Jonker
'bus-width' and pinctrl containing the bus-pins
should be in the same file, so add them to
all mmc nodes in 'px30.dtsi'.
Applied, thanks!
[1/1] arm64: dts: rockchip: add bus-width properties to mmc nodes for px30
commit: fb0ab17f1ab750d9662ec6b9fb3aa541a8ac1f5c
Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>