Skip to contentSkip to conversation

arm64: dts: lx2160a: add more thermal zone support

PATCH Applied Yuantian Tang 2 participants 3 messages Apr 17, 2020 – May 11, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: lx2160a: add more thermal zone support

There are 7 thermal zones in lx2160a soc. Add the rest thermal zone node to enable them.
Also correct one of the values for tmu-calibration property.

---
 .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 130 +++++++++++++++++-
 1 file changed, 125 insertions(+), 5 deletions(-)
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +125 -5
index ae1b113ab162..abaeb587de48 100644
@@ -436,19 +436,19 @@
 	};
 
 	thermal-zones {
-		core_thermal1: core-thermal1 {
+		cluster6-7 {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
 
 			trips {
-				core_cluster_alert: core-cluster-alert {
+				cluster6_7_alert: cluster6-7-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				core_cluster_crit: core-cluster-crit {
+				cluster6_7_crit: cluster6-7-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -457,7 +457,7 @@
 
 			cooling-maps {
 				map0 {
-					trip = <&core_cluster_alert>;
+					trip = <&cluster6_7_alert>;
 					cooling-device =
 						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -478,6 +478,126 @@
 				};
 			};
 		};
+
+		ddr-cluster5 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				ddr-cluster5-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-cluster5-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wriop {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				wriop-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				wriop-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		dce-qbman-hsio2 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 3>;
+
+			trips {
+				dce-qbman-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				dce-qbman-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ccn-dpaa-tbu {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				ccn-dpaa-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ccn-dpaa-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster4-hsio3 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 5>;
+
+			trips {
+				clust4-hsio3-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				clust4-hsio3-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster2-3 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 6>;
+
+			trips {
+				cluster2-3-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster2-3-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 
 	soc {
@@ -549,7 +669,7 @@
 				/* Calibration data group 1 */
 				<0x00000000 0x00000035
 				/* Calibration data group 2 */
-				0x00010001 0x00000154>;
+				0x00000001 0x00000154>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
Signature · 1 line
2.17.1
author
#1 lore raw

PING.

BR,
Andy

Quoted 194 lines

-----Original Message-----
From: Yuantian Tang <[email protected]>
Sent: 2020年4月17日 14:16
To: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]
Cc: [email protected]; [email protected]; [email protected]; Andy Tang <[email protected]>
Subject: [PATCH] arm64: dts: lx2160a: add more thermal zone support

There are 7 thermal zones in lx2160a soc. Add the rest thermal zone node to enable them.
Also correct one of the values for tmu-calibration property.

---
 .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 130 +++++++++++++++++-
 1 file changed, 125 insertions(+), 5 deletions(-)
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +4 -4
index ae1b113ab162..abaeb587de48 100644
@@ -436,19 +436,19 @@
 	};
 
 	thermal-zones {
-		core_thermal1: core-thermal1 {
+		cluster6-7 {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
 
 			trips {
-				core_cluster_alert: core-cluster-alert {
+				cluster6_7_alert: cluster6-7-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				core_cluster_crit: core-cluster-crit {
+				cluster6_7_crit: cluster6-7-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -457,7 +457,7 @@
 
 			cooling-maps {
 				map0 {
-					trip = <&core_cluster_alert>;
+					trip = <&cluster6_7_alert>;
 					cooling-device =
 						<&cpu0 THERMAL_NO_LIMIT
 THERMAL_NO_LIMIT>,

<&cpu1 THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>, @@ -478,6 +478,126 @@

arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +121 -2
 				};
 			};
 		};
+
+		ddr-cluster5 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				ddr-cluster5-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-cluster5-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wriop {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				wriop-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				wriop-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		dce-qbman-hsio2 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 3>;
+
+			trips {
+				dce-qbman-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				dce-qbman-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ccn-dpaa-tbu {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				ccn-dpaa-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ccn-dpaa-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster4-hsio3 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 5>;
+
+			trips {
+				clust4-hsio3-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				clust4-hsio3-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster2-3 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 6>;
+
+			trips {
+				cluster2-3-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster2-3-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 
 	soc {
@@ -549,7 +669,7 @@
 				/* Calibration data group 1 */
 				<0x00000000 0x00000035
 				/* Calibration data group 2 */
-				0x00010001 0x00000154>;
+				0x00000001 0x00000154>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
--

2.17.1