Skip to contentSkip to conversation

net: phy: at803x: add support for AR8032 PHY

PATCH Applied David Bauer 3 participants 3 messages Apr 17, 2020 – Apr 18, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 net: phy: at803x: add support for AR8032 PHY

This adds support for the Qualcomm Atheros AR8032 Fast Ethernet PHY.

It shares many similarities with the already supported AR8030 PHY but additionally supports MII connection to the MAC.

---
Accidentally sent a very old WIP as v1.

 drivers/net/phy/at803x.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
drivers/net/phy/at803x.c +17 -0
index 31f731e6df72..31b6edcc1fd1 100644
@@ -106,6 +106,7 @@
 #define ATH9331_PHY_ID 0x004dd041
 #define ATH8030_PHY_ID 0x004dd076
 #define ATH8031_PHY_ID 0x004dd074
+#define ATH8032_PHY_ID 0x004dd023
 #define ATH8035_PHY_ID 0x004dd072
 #define AT803X_PHY_ID_MASK			0xffffffef
 
@@ -762,6 +763,21 @@ static struct phy_driver at803x_driver[] = {
 	.aneg_done		= at803x_aneg_done,
 	.ack_interrupt		= &at803x_ack_interrupt,
 	.config_intr		= &at803x_config_intr,
+}, {
+	/* Qualcomm Atheros AR8032 */
+	PHY_ID_MATCH_EXACT(ATH8032_PHY_ID),
+	.name			= "Qualcomm Atheros AR8032",
+	.probe			= at803x_probe,
+	.remove			= at803x_remove,
+	.config_init		= at803x_config_init,
+	.link_change_notify	= at803x_link_change_notify,
+	.set_wol		= at803x_set_wol,
+	.get_wol		= at803x_get_wol,
+	.suspend		= at803x_suspend,
+	.resume			= at803x_resume,
+	/* PHY_BASIC_FEATURES */
+	.ack_interrupt		= at803x_ack_interrupt,
+	.config_intr		= at803x_config_intr,
 }, {
 	/* ATHEROS AR9331 */
 	PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
@@ -778,6 +794,7 @@ module_phy_driver(at803x_driver);
 static struct mdio_device_id __maybe_unused atheros_tbl[] = {
 	{ ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
 	{ ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
+	{ PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) },
 	{ ATH8035_PHY_ID, AT803X_PHY_ID_MASK },
 	{ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) },
 	{ }
Signature · 1 line
2.26.0
maintainer Reviewed-by on v2 1/1
#1 lore raw
Quoted 4 lines · David Bauer

This adds support for the Qualcomm Atheros AR8032 Fast Ethernet PHY.

It shares many similarities with the already supported AR8030 PHY but additionally supports MII connection to the MAC.

Hi David

This looks good. However, next time please put in the patch subject which tree this is for

[PATCH net-next 1/1]

Andrew