target/i386: Fix the CPUID leaf CPUID_Fn80000008
PATCH 1/1 target/i386: Fix the CPUID leaf CPUID_Fn80000008
CPUID leaf CPUID_Fn80000008_ECX provides information about the number of threads supported by the processor. It was found that the field ApicIdSize(bits 15-12) was not set correctly.
ApicIdSize is defined as the number of bits required to represent all the ApicId values within a package.
Valid Values: Value Description
3h-0h Reserved.
4h up to 16 threads.
5h up to 32 threads.
6h up to 64 threads.
7h up to 128 threads.
Fh-8h Reserved.
Fix the bit appropriately.
This came up during following thread.
https://lore.kernel.org/qemu-devel/158643709116.17430.15995069125716778943.malonedeb@wampee.canonical.com/#t
Refer the Processor Programming Reference (PPR) for AMD Family 17h Model 01h, Revision B1 Processors. The documentation is available from the bugzilla Link below.
--- target/i386/cpu.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
target/i386/cpu.c +9 -3
@@ -5830,11 +5830,17 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count, *eax = cpu->phys_bits; } *ebx = env->features[FEAT_8000_0008_EBX ]; - *ecx =0 ; - *edx =0 ;if (cs->nr_cores * cs->nr_threads >1 ) { - *ecx |= (cs->nr_cores * cs->nr_threads) -1 ; +unsigned int max_apicids, bits_required; + + max_apicids = (cs->nr_cores * cs->nr_threads) -1 ; +/* Find out the number of bits to represent all the apicids */ + bits_required =32 -clz32 (max_apicids); + *ecx = bits_required <<12 | max_apicids; + }else { + *ecx =0 ; } + *edx =0 ;break ;case 0x8000000A :if (env->features[FEAT_8000_0001_ECX ] &CPUID_EXT3_SVM ) {
Good catch, thanks for the patch. Comments below:
Quoted 36 lines · Babu Moger
CPUID leaf
CPUID_Fn80000008_ECXprovides information about the number of threads supported by the processor. It was found that the field ApicIdSize(bits 15-12) was not set correctly.ApicIdSize is defined as the number of bits required to represent all the ApicId values within a package.
Valid Values: Value Description
3h-0h Reserved.
4h up to 16 threads.
5h up to 32 threads.
6h up to 64 threads.
7h up to 128 threads.
Fh-8h Reserved.Fix the bit appropriately.
This came up during following thread.
https://lore.kernel.org/qemu-devel/158643709116.17430.15995069125716778943.malonedeb@wampee.canonical.com/#tRefer the Processor Programming Reference (PPR) for AMD Family 17h Model 01h, Revision B1 Processors. The documentation is available from the bugzilla Link below.
Reported-by Philipp Eppelt <[email protected]>Signed-off-by Babu Moger <[email protected]>--- target/i386/cpu.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)target/i386/cpu.c +0
-0
target/i386/cpu.c void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count, · line 5836
Quoted 7 lines
target/i386/cpu.c +0
-3@@ -5830,11 +5830,17 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count, *eax = cpu->phys_bits; } *ebx = env->features[FEAT_8000_0008_EBX ]; - *ecx =0 ; - *edx =0 ;if (cs->nr_cores * cs->nr_threads >1 ) { - *ecx |= (cs->nr_cores * cs->nr_threads) -1 ;
I'm not sure we want a compatibility flag to keep ABI on older machine types, here. Strictly speaking, CPUID must never change on older machine types, but sometimes trying hard to emulate bugs of old QEMU versions is a pointless exercise.
target/i386/cpu.c void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count, · line 5838
Quoted 5 lines
target/i386/cpu.c +5
-0+unsigned int max_apicids, bits_required; + + max_apicids = (cs->nr_cores * cs->nr_threads) -1 ; +/* Find out the number of bits to represent all the apicids */ + bits_required =32 -clz32 (max_apicids);
This won't work if nr_cores > 1 and nr_threads is not a power of 2, will it?
For reference, the field is documented[1] as:
"The number of bits in the initial Core::X86::Apic::ApicId[ApicId] value that indicate thread ID within a package"
This sounds like the value already stored atCPUX86State::pkg_offset.
target/i386/cpu.c void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count, · line 5839
Quoted 1 line
target/i386/cpu.c +1
-0+ *ecx = bits_required <<12 | max_apicids;
Bits 7:0 are documented as "The number of threads in the package is NC+1", with no reference to APIC IDs at all.
Using ((nr_cores * nr_threads) - 1) for bits 7:0 sounds correct, but the variable name seems misleading.
target/i386/cpu.c void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count, · line 5846
Quoted 9 lines
target/i386/cpu.c +3
-0+ }else { + *ecx =0 ; } + *edx =0 ;break ;case 0x8000000A :if (env->features[FEAT_8000_0001_ECX ] &CPUID_EXT3_SVM ) {
References:
[1] Processor Programming Reference (PPR) for
AMD Family 17h Model 18h, Revision B1 Processors
55570-B1 Rev 3.14 - Sep 26, 2019
https://bugzilla.kernel.org/attachment.cgi?id=287395&action=editSignature · 1 line
Eduardo
Quoted 43 lines · Eduardo Habkost
Good catch, thanks for the patch. Comments below:
Quoted 40 lines · Babu Moger
CPUID leaf
CPUID_Fn80000008_ECXprovides information about the number of threads supported by the processor. It was found that the field ApicIdSize(bits 15-12) was not set correctly.ApicIdSize is defined as the number of bits required to represent all the ApicId values within a package.
Valid Values: Value Description
3h-0h Reserved.
4h up to 16 threads.
5h up to 32 threads.
6h up to 64 threads.
7h up to 128 threads.
Fh-8h Reserved.Fix the bit appropriately.
Refer the Processor Programming Reference (PPR) for AMD Family 17h Model 01h, Revision B1 Processors. The documentation is available from the bugzilla Link below.
Reported-by Philipp Eppelt <[email protected]>Signed-off-by Babu Moger <[email protected]>--- target/i386/cpu.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)target/i386/cpu.c +0
-1@@ -5830,11 +5830,17 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count, *eax = cpu->phys_bits; } *ebx = env->features[FEAT_8000_0008_EBX ]; - *ecx =0 ;
Quoted 8 lines
target/i386/cpu.c void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count, · line 5836
Quoted 3 lines
target/i386/cpu.c +0
-2- *edx =0 ;if (cs->nr_cores * cs->nr_threads >1 ) { - *ecx |= (cs->nr_cores * cs->nr_threads) -1 ;I'm not sure we want a compatibility flag to keep ABI on older machine types, here. Strictly speaking, CPUID must never change on older machine types, but sometimes trying hard to emulate bugs of old QEMU versions is a pointless exercise.
Not sure about this. But it seemed like nobody cared about this field before.
Quoted 10 lines
target/i386/cpu.c void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count, · line 5838
Quoted 7 lines
target/i386/cpu.c +5
-0+unsigned int max_apicids, bits_required; + + max_apicids = (cs->nr_cores * cs->nr_threads) -1 ; +/* Find out the number of bits to represent all the apicids */ + bits_required =32 -clz32 (max_apicids);This won't work if
nr_cores> 1 andnr_threadsis not a power of 2, will it?
It seem to work. Tested with threads=5,cores=3.
Quoted 8 lines
For reference, the field is documented[1] as:
"The number of bits in the initial Core::X86::Apic::ApicId[ApicId] value that indicate thread ID within a package"
This sounds like the value already stored at
CPUX86State::pkg_offset.
Yes, it is already in pkg_offset. We can use it.
Quoted 9 lines
target/i386/cpu.c void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count, · line 5839
Quoted 3 lines
target/i386/cpu.c +1
-0+ *ecx = bits_required <<12 | max_apicids;Bits 7:0 are documented as "The number of threads in the package is NC+1", with no reference to APIC IDs at all.
Using ((
nr_cores*nr_threads) - 1) for bits 7:0 sounds correct, but the variable name seems misleading.
I can change the variable name to num_threads.
Quoted 20 lines
target/i386/cpu.c void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count, · line 5846
Quoted 11 lines
target/i386/cpu.c +3
-0+ }else { + *ecx =0 ; } + *edx =0 ;break ;case 0x8000000A :if (env->features[FEAT_8000_0001_ECX ] &CPUID_EXT3_SVM ) {References:
[1] Processor Programming Reference (PPR) for
AMD Family 17h Model 18h, Revision B1 Processors 55570-B1 Rev 3.14 - Sep 26, 2019 https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbugzilla.kernel.org%2Fattachment.cgi%3Fid%3D287395%26action%3Dedit&data=02%7C01%7Cbabu.moger%40amd.com%7C1b8d59370cdb403dd54308d7e303adb7%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637227477274521298&sdata=UsM3h4vp3dTgigqOvt7GrGiIUHvH8Kn1g%2BO%2FfGMav%2Bc%3D&reserved=0