drm/i915: Flatten intel_dp_check_mst_status() a bit
Subsystems (3)
PATCH 1/2 drm/i915: Flatten intel_dp_check_mst_status() a bit
From: Ville Syrjälä <[email protected]>
Make intel_dp_check_mst_status() somewhat legible by humans.
Note that the return value of drm_dp_mst_hpd_irq() is always either 0 or -ENOMEM, and we never did anything with the latter so we can just ignore the whole thing.
We can also get rid of the direct drm_dp_mst_topology_mgr_set_mst(false) call since returning -EINVAL causes the caller to do the very same call for us.
--- drivers/gpu/drm/i915/display/intel_dp.c | 88 ++++++++++++------------- 1 file changed, 41 insertions(+), 47 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +41 -47
@@ -5628,61 +5628,55 @@ static int intel_dp_check_mst_status(struct intel_dp *intel_dp) {struct drm_i915_private *i915 =dp_to_i915 (intel_dp); -bool bret; -if (intel_dp->is_mst) { -u8 esi[DP_DPRX_ESI_LEN ] = {0 }; -int ret =0 ; +if (!intel_dp->is_mst) +return -EINVAL ; + +WARN_ON_ONCE (intel_dp->active_mst_links <0 ); + +for (;;) { +u8 esi[DP_DPRX_ESI_LEN ] = {}; +bool bret, handled;int retry; -bool handled; -WARN_ON_ONCE (intel_dp->active_mst_links <0 ); bret =intel_dp_get_sink_irq_esi (intel_dp, esi); -go_again: -if (bret == true) { - -/* check link status - esi[10] = 0x200c */ -if (intel_dp->active_mst_links >0 && - !drm_dp_channel_eq_ok (&esi[10 ], intel_dp->lane_count)) { -drm_dbg_kms (&i915->drm, -"channel EQ not ok, retraining\n" ); -intel_dp_start_link_train (intel_dp); -intel_dp_stop_link_train (intel_dp); - } - -drm_dbg_kms (&i915->drm,"got esi %3ph\n" , esi); - ret =drm_dp_mst_hpd_irq (&intel_dp->mst_mgr, esi, &handled); - -if (handled) { -for (retry =0 ; retry <3 ; retry++) { -int wret; - wret =drm_dp_dpcd_write (&intel_dp->aux, -DP_SINK_COUNT_ESI +1 , - &esi[1 ],3 ); -if (wret ==3 ) { -break ; - } - } - - bret =intel_dp_get_sink_irq_esi (intel_dp, esi); -if (bret == true) { -drm_dbg_kms (&i915->drm, -"got esi2 %3ph\n" , esi); - goto go_again; - } - }else - ret =0 ; - -return ret; - }else { +if (!bret) {drm_dbg_kms (&i915->drm,"failed to get ESI - device may have failed\n" ); - intel_dp->is_mst = false; -drm_dp_mst_topology_mgr_set_mst (&intel_dp->mst_mgr, - intel_dp->is_mst); +return -EINVAL ; + } + +/* check link status - esi[10] = 0x200c */ +/* +* FIXME kill this and use the SST retraining approach +* for MST as well. +*/ +if (intel_dp->active_mst_links >0 && + !drm_dp_channel_eq_ok (&esi[10 ], intel_dp->lane_count)) { +drm_dbg_kms (&i915->drm, +"channel EQ not ok, retraining\n" ); +intel_dp_start_link_train (intel_dp); +intel_dp_stop_link_train (intel_dp); + } + +drm_dbg_kms (&i915->drm,"got esi %3ph\n" , esi); + +drm_dp_mst_hpd_irq (&intel_dp->mst_mgr, esi, &handled); +if (!handled) +break ; + +for (retry =0 ; retry <3 ; retry++) { +int wret; + + wret =drm_dp_dpcd_write (&intel_dp->aux, +DP_SINK_COUNT_ESI +1 , + &esi[1 ],3 ); +if (wret ==3 ) +break ; } } -return -EINVAL ; + +return 0 ; } static bool
Signature · 6 lines
2.24.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/2 drm/i915: Push MST link retraining to the hotplug work
From: Ville Syrjälä <[email protected]>
We shouldn't try to do link retraining from the short hpd handler. We can't take any modeset locks there so this is racy as hell. Push the whole thing into the hotplug work like we do with SST.
We'll just have to adjust the SST retraining code to deal with the MST encoders and multiple pipes.
TODO: I have a feeling we should just rip this all out and do a full modeset instead. Stuff like port sync and the tgl+ MST master transcoder stuff maybe doesn't work well if we try to retrain without following the proper modeset sequence. So far haven't done any actual tests to confirm that though.
--- drivers/gpu/drm/i915/display/intel_dp.c | 165 ++++++++++++++++++------ 1 file changed, 122 insertions(+), 43 deletions(-)
drivers/gpu/drm/i915/display/intel_dp.c +122 -43
@@ -5628,6 +5628,7 @@ static int intel_dp_check_mst_status(struct intel_dp *intel_dp) {struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +bool need_retrain = false;if (!intel_dp->is_mst)return -EINVAL ;
@@ -5647,16 +5648,11 @@ intel_dp_check_mst_status(struct intel_dp *intel_dp) }/* check link status - esi[10] = 0x200c */ -/* -* FIXME kill this and use the SST retraining approach -* for MST as well. -*/ -if (intel_dp->active_mst_links >0 && +if (intel_dp->active_mst_links >0 && !need_retrain && !drm_dp_channel_eq_ok (&esi[10 ], intel_dp->lane_count)) {drm_dbg_kms (&i915->drm,"channel EQ not ok, retraining\n" ); -intel_dp_start_link_train (intel_dp); -intel_dp_stop_link_train (intel_dp); + need_retrain = true; }drm_dbg_kms (&i915->drm,"got esi %3ph\n" , esi);
@@ -5676,7 +5672,7 @@ intel_dp_check_mst_status(struct intel_dp *intel_dp) } } -return 0 ; +return need_retrain; } static bool
@@ -5713,20 +5709,102 @@ intel_dp_needs_link_retrain(struct intel_dp *intel_dp)return !drm_dp_channel_eq_ok (link_status, intel_dp->lane_count); } +static bool intel_dp_has_connector (struct intel_dp *intel_dp, +const struct drm_connector_state *conn_state) +{ +struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +struct intel_encoder *encoder; +enum pipe pipe; + +if (!conn_state->best_encoder) +return false; + +/* SST */ + encoder = &dp_to_dig_port (intel_dp)->base; +if (conn_state->best_encoder == &encoder->base) +return true; + +/* MST */ +for_each_pipe (i915, pipe) { + encoder = &intel_dp->mst_encoders[pipe]->base; +if (conn_state->best_encoder == &encoder->base) +return true; + } + +return false; +} + +static int intel_dp_prep_link_retrain (struct intel_dp *intel_dp, +struct drm_modeset_acquire_ctx *ctx, +u32 *crtc_mask) +{ +struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +struct drm_connector_list_iter conn_iter; +struct intel_connector *connector; +int ret =0 ; + + *crtc_mask =0 ; + +if (!intel_dp_needs_link_retrain (intel_dp)) +return 0 ; + +drm_connector_list_iter_begin (&i915->drm, &conn_iter); +for_each_intel_connector_iter (connector, &conn_iter) { +struct drm_connector_state *conn_state = + connector->base.state; +struct intel_crtc_state *crtc_state; +struct intel_crtc *crtc; + +if (!intel_dp_has_connector (intel_dp, conn_state)) +continue ; + + crtc =to_intel_crtc (conn_state->crtc); +if (!crtc) +continue ; + + ret =drm_modeset_lock (&crtc->base.mutex, ctx); +if (ret) +break ; + + crtc_state =to_intel_crtc_state (crtc->base.state); + +drm_WARN_ON (&i915->drm, !intel_crtc_has_dp_encoder (crtc_state)); + +if (!crtc_state->hw.active) +continue ; + +if (conn_state->commit && + !try_wait_for_completion (&conn_state->commit->hw_done)) +continue ; + + *crtc_mask |=drm_crtc_mask (&crtc->base); + } +drm_connector_list_iter_end (&conn_iter); + +if (!intel_dp_needs_link_retrain (intel_dp)) + *crtc_mask =0 ; + +return ret; +} + +static bool intel_dp_is_connected (struct intel_dp *intel_dp) +{ +struct intel_connector *connector = intel_dp->attached_connector; + +return connector->base.status == connector_status_connected || + intel_dp->is_mst; +} +int intel_dp_retrain_link (struct intel_encoder *encoder,struct drm_modeset_acquire_ctx *ctx) {struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);struct intel_dp *intel_dp =enc_to_intel_dp (encoder); -struct intel_connector *connector = intel_dp->attached_connector; -struct drm_connector_state *conn_state; -struct intel_crtc_state *crtc_state;struct intel_crtc *crtc; +u32 crtc_mask;int ret; -/* FIXME handle the MST connectors as well */ - -if (!connector || connector->base.status != connector_status_connected) +if (!intel_dp_is_connected (intel_dp))return 0 ; ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex,
@@ -5734,46 +5812,42 @@ int intel_dp_retrain_link(struct intel_encoder *encoder,if (ret)return ret; - conn_state = connector->base.state; - - crtc =to_intel_crtc (conn_state->crtc); -if (!crtc) -return 0 ; - - ret =drm_modeset_lock (&crtc->base.mutex, ctx); + ret =intel_dp_prep_link_retrain (intel_dp, ctx, &crtc_mask);if (ret)return ret; - crtc_state =to_intel_crtc_state (crtc->base.state); - -drm_WARN_ON (&dev_priv->drm, !intel_crtc_has_dp_encoder (crtc_state)); - -if (!crtc_state->hw.active) +if (crtc_mask ==0 )return 0 ; -if (conn_state->commit && - !try_wait_for_completion (&conn_state->commit->hw_done)) -return 0 ; +drm_dbg_kms (&dev_priv->drm,"[ENCODER:%d:%s] retraining link\n" , + encoder->base.base.id, encoder->base.name); -if (!intel_dp_needs_link_retrain (intel_dp)) -return 0 ; +for_each_intel_crtc_mask (&dev_priv->drm, crtc, crtc_mask) { +const struct intel_crtc_state *crtc_state = +to_intel_crtc_state (crtc->base.state); -/* Suppress underruns caused by re-training */ -intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, false); -if (crtc_state->has_pch_encoder) -intel_set_pch_fifo_underrun_reporting (dev_priv, -intel_crtc_pch_transcoder (crtc), false); +/* Suppress underruns caused by re-training */ +intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, false); +if (crtc_state->has_pch_encoder) +intel_set_pch_fifo_underrun_reporting (dev_priv, +intel_crtc_pch_transcoder (crtc), false); + }intel_dp_start_link_train (intel_dp);intel_dp_stop_link_train (intel_dp); -/* Keep underrun reporting disabled until things are stable */ -intel_wait_for_vblank (dev_priv, crtc->pipe); +for_each_intel_crtc_mask (&dev_priv->drm, crtc, crtc_mask) { +const struct intel_crtc_state *crtc_state = +to_intel_crtc_state (crtc->base.state); -intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, true); -if (crtc_state->has_pch_encoder) -intel_set_pch_fifo_underrun_reporting (dev_priv, -intel_crtc_pch_transcoder (crtc), true); +/* Keep underrun reporting disabled until things are stable */ +intel_wait_for_vblank (dev_priv, crtc->pipe); + +intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, true); +if (crtc_state->has_pch_encoder) +intel_set_pch_fifo_underrun_reporting (dev_priv, +intel_crtc_pch_transcoder (crtc), true); + }return 0 ; }
@@ -7415,7 +7489,8 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) }if (intel_dp->is_mst) { -if (intel_dp_check_mst_status (intel_dp) == -EINVAL ) { +switch (intel_dp_check_mst_status (intel_dp)) { +case -EINVAL :/* * If we were in MST mode, and device is not * there, get out of MST mode
@@ -7429,6 +7504,10 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) intel_dp->is_mst);return IRQ_NONE ; +case 1 : +return IRQ_NONE ; +default : +break ; } }
Signature · 6 lines
2.24.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH 2/2] drm/i915: Push MST link retraining to the hotplug work
Quoted 6 lines · Ville Syrjala
From: Ville Syrjälä <[email protected]>
We shouldn't try to do link retraining from the short hpd handler. We can't take any modeset locks there so this is racy as hell. Push the whole thing into the hotplug work like we do with SST.
Quoted 8 lines
We'll just have to adjust the SST retraining code to deal with the MST encoders and multiple pipes.
TODO: I have a feeling we should just rip this all out and do a full modeset instead. Stuff like port sync and the tgl+ MST master transcoder stuff maybe doesn't work well if we try to retrain without following the proper modeset sequence. So far haven't done any actual tests to confirm that though.
To answer your feeling here: yes-we should, I have some branches for doing this sort of thing with i915 but they are ancient at this point. Once I get to fallback link retraining we should be able to use this in i915 to handle figuring out what all needs to be reset for an MST training.
fwiw - If you have some need for fallback link retraining soon I can move it up on my todo list for MST. I've got the hard design parts already figured out from the last time I tried implementing it, so writing new patches shouldn't be too difficult.
(note - this patch is still worth merging I'd imagine, since this looks like it should at least handle retraining an MST topology at the same link rate just fine)
Quoted 119 lines
Cc Lyude Paul <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/i915/display/intel_dp.c | 165 ++++++++++++++++++------ 1 file changed, 122 insertions(+), 43 deletions(-)drivers/gpu/drm/i915/display/intel_dp.c +68
-8@@ -5628,6 +5628,7 @@ static int intel_dp_check_mst_status(struct intel_dp *intel_dp) {struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +bool need_retrain = false;if (!intel_dp->is_mst)return -EINVAL ;@@ -5647,16 +5648,11 @@ intel_dp_check_mst_status(struct intel_dp *intel_dp) }/* check link status - esi[10] = 0x200c */ -/* -* FIXME kill this and use the SST retraining approach -* for MST as well. -*/ -if (intel_dp->active_mst_links >0 && +if (intel_dp->active_mst_links >0 && !need_retrain && !drm_dp_channel_eq_ok (&esi[10 ], intel_dp->lane_count)) {drm_dbg_kms (&i915->drm,"channel EQ not ok, retraining\n" ); -intel_dp_start_link_train (intel_dp); -intel_dp_stop_link_train (intel_dp); + need_retrain = true; }drm_dbg_kms (&i915->drm,"got esi %3ph\n" , esi);@@ -5676,7 +5672,7 @@ intel_dp_check_mst_status(struct intel_dp *intel_dp) } } -return 0 ; +return need_retrain; } static bool@@ -5713,20 +5709,102 @@ intel_dp_needs_link_retrain(struct intel_dp *intel_dp)return !drm_dp_channel_eq_ok (link_status, intel_dp->lane_count); } +static bool intel_dp_has_connector (struct intel_dp *intel_dp, +const struct drm_connector_state *conn_state) +{ +struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +struct intel_encoder *encoder; +enum pipe pipe; + +if (!conn_state->best_encoder) +return false; + +/* SST */ + encoder = &dp_to_dig_port (intel_dp)->base; +if (conn_state->best_encoder == &encoder->base) +return true; + +/* MST */ +for_each_pipe (i915, pipe) { + encoder = &intel_dp->mst_encoders[pipe]->base; +if (conn_state->best_encoder == &encoder->base) +return true; + } + +return false; +} + +static int intel_dp_prep_link_retrain (struct intel_dp *intel_dp, +struct drm_modeset_acquire_ctx *ctx, +u32 *crtc_mask) +{ +struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +struct drm_connector_list_iter conn_iter; +struct intel_connector *connector; +int ret =0 ; + + *crtc_mask =0 ; + +if (!intel_dp_needs_link_retrain (intel_dp)) +return 0 ; + +drm_connector_list_iter_begin (&i915->drm, &conn_iter); +for_each_intel_connector_iter (connector, &conn_iter) { +struct drm_connector_state *conn_state = + connector->base.state; +struct intel_crtc_state *crtc_state; +struct intel_crtc *crtc; + +if (!intel_dp_has_connector (intel_dp, conn_state)) +continue ; + + crtc =to_intel_crtc (conn_state->crtc); +if (!crtc) +continue ; + + ret =drm_modeset_lock (&crtc->base.mutex, ctx); +if (ret) +break ; + + crtc_state =to_intel_crtc_state (crtc->base.state); + +drm_WARN_ON (&i915->drm, !intel_crtc_has_dp_encoder (crtc_state)); + +if (!crtc_state->hw.active) +continue ; +
drivers/gpu/drm/i915/display/intel_dp.c intel_dp_needs_link_retrain(struct intel_dp · line 5788
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp.c +10
-0+if (conn_state->commit && + !try_wait_for_completion (&conn_state->commit->hw_done)) +continue ; + + *crtc_mask |=drm_crtc_mask (&crtc->base); + } +drm_connector_list_iter_end (&conn_iter); + +if (!intel_dp_needs_link_retrain (intel_dp)) + *crtc_mask =0 ;
Also fwiw ^ this is the kind of logic I was thinking for the MST helpers (e.g. having helpers (+ setting link_status for each affected connector, etc. et.). again though-it's fine if this stays in i915 for now, but we should move it in the future.
Quoted 133 lines
drivers/gpu/drm/i915/display/intel_dp.c +13
-6+ +return ret; +} + +static bool intel_dp_is_connected (struct intel_dp *intel_dp) +{ +struct intel_connector *connector = intel_dp->attached_connector; + +return connector->base.status == connector_status_connected || + intel_dp->is_mst; +} +int intel_dp_retrain_link (struct intel_encoder *encoder,struct drm_modeset_acquire_ctx *ctx) {struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);struct intel_dp *intel_dp =enc_to_intel_dp (encoder); - struct intel_connector *connector = intel_dp->attached_connector; - struct drm_connector_state *conn_state; - struct intel_crtc_state *crtc_state;struct intel_crtc *crtc; +u32 crtc_mask;int ret; - /* FIXME handle the MST connectors as well */ - - if (!connector || connector->base.status !=
connector_status_connected)drivers/gpu/drm/i915/display/intel_dp.c +17
-28+if (!intel_dp_is_connected (intel_dp))return 0 ; ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex,@@ -5734,46 +5812,42 @@ int intel_dp_retrain_link(struct intel_encoder *encoder, if (ret)return ret; - conn_state = connector->base.state; - - crtc =to_intel_crtc (conn_state->crtc); -if (!crtc) -return 0 ; - - ret =drm_modeset_lock (&crtc->base.mutex, ctx); + ret =intel_dp_prep_link_retrain (intel_dp, ctx, &crtc_mask);if (ret)return ret; - crtc_state =to_intel_crtc_state (crtc->base.state); - -drm_WARN_ON (&dev_priv->drm, !intel_crtc_has_dp_encoder (crtc_state)); - -if (!crtc_state->hw.active) +if (crtc_mask ==0 )return 0 ; -if (conn_state->commit && - !try_wait_for_completion (&conn_state->commit->hw_done)) -return 0 ; +drm_dbg_kms (&dev_priv->drm,"[ENCODER:%d:%s] retraining link\n" , + encoder->base.base.id, encoder->base.name); -if (!intel_dp_needs_link_retrain (intel_dp)) -return 0 ; +for_each_intel_crtc_mask (&dev_priv->drm, crtc, crtc_mask) { +const struct intel_crtc_state *crtc_state = +to_intel_crtc_state (crtc->base.state); -/* Suppress underruns caused by re-training */ -intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, false); -if (crtc_state->has_pch_encoder) -intel_set_pch_fifo_underrun_reporting (dev_priv, - intel_crtc_pch_transcode r(crtc), false); +/* Suppress underruns caused by re-training */ +intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, false); +if (crtc_state->has_pch_encoder) +intel_set_pch_fifo_underrun_reporting (dev_priv, + intel_crtc_pch_transcoder (crtc), false); + }intel_dp_start_link_train (intel_dp);intel_dp_stop_link_train (intel_dp); -/* Keep underrun reporting disabled until things are stable */ -intel_wait_for_vblank (dev_priv, crtc->pipe); +for_each_intel_crtc_mask (&dev_priv->drm, crtc, crtc_mask) { +const struct intel_crtc_state *crtc_state = +to_intel_crtc_state (crtc->base.state); -intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, true); -if (crtc_state->has_pch_encoder) -intel_set_pch_fifo_underrun_reporting (dev_priv, - intel_crtc_pch_transcoder(crtc), true);
drivers/gpu/drm/i915/display/intel_dp.c +4
-0+/* Keep underrun reporting disabled until things are stable */ +intel_wait_for_vblank (dev_priv, crtc->pipe); + + intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe,true);
drivers/gpu/drm/i915/display/intel_dp.c +3
-0+if (crtc_state->has_pch_encoder) +intel_set_pch_fifo_underrun_reporting (dev_priv, + intel_crtc_pch_transcoder(crtc), true);
drivers/gpu/drm/i915/display/intel_dp.c +3
-1+ }return 0 ; }@@ -7415,7 +7489,8 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) }if (intel_dp->is_mst) { -if (intel_dp_check_mst_status (intel_dp) == -EINVAL ) { +switch (intel_dp_check_mst_status (intel_dp)) { +case -EINVAL :/* * If we were in MST mode, and device is not drivers/gpu/drm/i915/display/intel_dp.c +4
-0* there, get out of MST mode @@ -7429,6 +7504,10 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) intel_dp->is_mst);return IRQ_NONE ; +case 1 : +return IRQ_NONE ; +default : +break ; } }
Signature · 8 lines
Cheers, Lyude Paul (she/her) Associate Software Engineer at Red Hat _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Lyude Paul
Reviewed-byRe: [Intel-gfx] [PATCH 2/2] drm/i915: Push MST link retraining to the hotplug work
...completely forgot to actually put my r-b here as well, oops
Quoted 303 lines · Lyude Paul
Quoted 6 lines · Ville Syrjala
From: Ville Syrjälä <[email protected]>
We shouldn't try to do link retraining from the short hpd handler. We can't take any modeset locks there so this is racy as hell. Push the whole thing into the hotplug work like we do with SST.
Quoted 8 lines
We'll just have to adjust the SST retraining code to deal with the MST encoders and multiple pipes.
TODO: I have a feeling we should just rip this all out and do a full modeset instead. Stuff like port sync and the tgl+ MST master transcoder stuff maybe doesn't work well if we try to retrain without following the proper modeset sequence. So far haven't done any actual tests to confirm that though.
To answer your feeling here: yes-we should, I have some branches for doing this sort of thing with i915 but they are ancient at this point. Once I get to
fallback link retraining we should be able to use this in i915 to handle figuring out what all needs to be reset for an MST training.fwiw - If you have some need for fallback link retraining soon I can move it up on my todo list for MST. I've got the hard design parts already figured out
from the last time I tried implementing it, so writing new patches shouldn't be too difficult.(note - this patch is still worth merging I'd imagine, since this looks like it should at least handle retraining an MST topology at the same link rate just fine)
Quoted 119 lines
Cc Lyude Paul <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/i915/display/intel_dp.c | 165 ++++++++++++++++++------ 1 file changed, 122 insertions(+), 43 deletions(-)drivers/gpu/drm/i915/display/intel_dp.c +3
-7@@ -5628,6 +5628,7 @@ static int intel_dp_check_mst_status(struct intel_dp *intel_dp) {struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +bool need_retrain = false;if (!intel_dp->is_mst)return -EINVAL ;@@ -5647,16 +5648,11 @@ intel_dp_check_mst_status(struct intel_dp *intel_dp) }/* check link status - esi[10] = 0x200c */ -/* -* FIXME kill this and use the SST retraining approach -* for MST as well. -*/ -if (intel_dp->active_mst_links >0 && +if (intel_dp->active_mst_links >0 && !need_retrain && !drm_dp_channel_eq_ok (&esi[10 ], intel_dp->lane_count)) {drm_dbg_kms (&i915->drm,"channel EQ not ok, retraining\n" ); -intel_dp_start_link_train (intel_dp); -intel_dp_stop_link_train (intel_dp); + need_retrain = true; }drivers/gpu/drm/i915/display/intel_dp.c +65
-1drm_dbg_kms (&i915->drm,"got esi %3ph\n" , esi);@@ -5676,7 +5672,7 @@ intel_dp_check_mst_status(struct intel_dp *intel_dp) } } -return 0 ; +return need_retrain; } static bool@@ -5713,20 +5709,102 @@ intel_dp_needs_link_retrain(struct intel_dp *intel_dp)return !drm_dp_channel_eq_ok (link_status, intel_dp->lane_count); } +static bool intel_dp_has_connector (struct intel_dp *intel_dp, +const struct drm_connector_state *conn_state) +{ +struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +struct intel_encoder *encoder; +enum pipe pipe; + +if (!conn_state->best_encoder) +return false; + +/* SST */ + encoder = &dp_to_dig_port (intel_dp)->base; +if (conn_state->best_encoder == &encoder->base) +return true; + +/* MST */ +for_each_pipe (i915, pipe) { + encoder = &intel_dp->mst_encoders[pipe]->base; +if (conn_state->best_encoder == &encoder->base) +return true; + } + +return false; +} + +static int intel_dp_prep_link_retrain (struct intel_dp *intel_dp, +struct drm_modeset_acquire_ctx *ctx, +u32 *crtc_mask) +{ +struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +struct drm_connector_list_iter conn_iter; +struct intel_connector *connector; +int ret =0 ; + + *crtc_mask =0 ; + +if (!intel_dp_needs_link_retrain (intel_dp)) +return 0 ; + +drm_connector_list_iter_begin (&i915->drm, &conn_iter); +for_each_intel_connector_iter (connector, &conn_iter) { +struct drm_connector_state *conn_state = + connector->base.state; +struct intel_crtc_state *crtc_state; +struct intel_crtc *crtc; + +if (!intel_dp_has_connector (intel_dp, conn_state)) +continue ; + + crtc =to_intel_crtc (conn_state->crtc); +if (!crtc) +continue ; + + ret =drm_modeset_lock (&crtc->base.mutex, ctx); +if (ret) +break ; + + crtc_state =to_intel_crtc_state (crtc->base.state); + +drm_WARN_ON (&i915->drm, !intel_crtc_has_dp_encoder (crtc_state)); + +if (!crtc_state->hw.active) +continue ; +drivers/gpu/drm/i915/display/intel_dp.c intel_dp_needs_link_retrain(struct intel_dp · line 5788
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp.c +10
-0+if (conn_state->commit && + !try_wait_for_completion (&conn_state->commit->hw_done)) +continue ; + + *crtc_mask |=drm_crtc_mask (&crtc->base); + } +drm_connector_list_iter_end (&conn_iter); + +if (!intel_dp_needs_link_retrain (intel_dp)) + *crtc_mask =0 ;Also fwiw ^ this is the kind of logic I was thinking for the MST helpers (e.g.
having helpers (+ settinglink_statusfor each affected connector, etc. et.).
again though-it's fine if this stays in i915 for now, but we should move it in
the future.Quoted 133 lines
drivers/gpu/drm/i915/display/intel_dp.c +13
-6+ +return ret; +} + +static bool intel_dp_is_connected (struct intel_dp *intel_dp) +{ +struct intel_connector *connector = intel_dp->attached_connector; + +return connector->base.status == connector_status_connected || + intel_dp->is_mst; +} +int intel_dp_retrain_link (struct intel_encoder *encoder,struct drm_modeset_acquire_ctx *ctx) {struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);struct intel_dp *intel_dp =enc_to_intel_dp (encoder); - struct intel_connector *connector = intel_dp->attached_connector; - struct drm_connector_state *conn_state; - struct intel_crtc_state *crtc_state;struct intel_crtc *crtc; +u32 crtc_mask;int ret; - /* FIXME handle the MST connectors as well */ - - if (!connector || connector->base.status !=
connector_status_connected)drivers/gpu/drm/i915/display/intel_dp.c +17
-28+if (!intel_dp_is_connected (intel_dp))return 0 ; ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex,@@ -5734,46 +5812,42 @@ int intel_dp_retrain_link(struct intel_encoder *encoder, if (ret)return ret; - conn_state = connector->base.state; - - crtc =to_intel_crtc (conn_state->crtc); -if (!crtc) -return 0 ; - - ret =drm_modeset_lock (&crtc->base.mutex, ctx); + ret =intel_dp_prep_link_retrain (intel_dp, ctx, &crtc_mask);if (ret)return ret; - crtc_state =to_intel_crtc_state (crtc->base.state); - -drm_WARN_ON (&dev_priv->drm, !intel_crtc_has_dp_encoder (crtc_state)); - -if (!crtc_state->hw.active) +if (crtc_mask ==0 )return 0 ; -if (conn_state->commit && - !try_wait_for_completion (&conn_state->commit->hw_done)) -return 0 ; +drm_dbg_kms (&dev_priv->drm,"[ENCODER:%d:%s] retraining link\n" , + encoder->base.base.id, encoder->base.name); -if (!intel_dp_needs_link_retrain (intel_dp)) -return 0 ; +for_each_intel_crtc_mask (&dev_priv->drm, crtc, crtc_mask) { +const struct intel_crtc_state *crtc_state = +to_intel_crtc_state (crtc->base.state); -/* Suppress underruns caused by re-training */ -intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, false); -if (crtc_state->has_pch_encoder) -intel_set_pch_fifo_underrun_reporting (dev_priv, - intel_crtc_pch_transcode r(crtc), false); +/* Suppress underruns caused by re-training */ +intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, false); +if (crtc_state->has_pch_encoder) +intel_set_pch_fifo_underrun_reporting (dev_priv, + intel_crtc_pch_transcoder (crtc), false); + }intel_dp_start_link_train (intel_dp);intel_dp_stop_link_train (intel_dp); -/* Keep underrun reporting disabled until things are stable */ -intel_wait_for_vblank (dev_priv, crtc->pipe); +for_each_intel_crtc_mask (&dev_priv->drm, crtc, crtc_mask) { +const struct intel_crtc_state *crtc_state = +to_intel_crtc_state (crtc->base.state); -intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, true); -if (crtc_state->has_pch_encoder) -intel_set_pch_fifo_underrun_reporting (dev_priv, - intel_crtc_pch_transcoder(crtc), true);
drivers/gpu/drm/i915/display/intel_dp.c +4
-0+/* Keep underrun reporting disabled until things are stable */ +intel_wait_for_vblank (dev_priv, crtc->pipe); + + intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe,true);
drivers/gpu/drm/i915/display/intel_dp.c +3
-0+if (crtc_state->has_pch_encoder) +intel_set_pch_fifo_underrun_reporting (dev_priv, + intel_crtc_pch_transcoder(crtc), true);
drivers/gpu/drm/i915/display/intel_dp.c +3
-1+ }return 0 ; }@@ -7415,7 +7489,8 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) }if (intel_dp->is_mst) { -if (intel_dp_check_mst_status (intel_dp) == -EINVAL ) { +switch (intel_dp_check_mst_status (intel_dp)) { +case -EINVAL :/* * If we were in MST mode, and device is not drivers/gpu/drm/i915/display/intel_dp.c +4
-0* there, get out of MST mode @@ -7429,6 +7504,10 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) intel_dp->is_mst);return IRQ_NONE ; +case 1 : +return IRQ_NONE ; +default : +break ; } }
Signature · 8 lines
Cheers, Lyude Paul (she/her) Associate Software Engineer at Red Hat _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH 2/2] drm/i915: Push MST link retraining to the hotplug work
In reply to Lyude PaulQuoted 16 lines · Lyude Paul
Quoted 6 lines · Ville Syrjala
From: Ville Syrjälä <[email protected]>
We shouldn't try to do link retraining from the short hpd handler. We can't take any modeset locks there so this is racy as hell. Push the whole thing into the hotplug work like we do with SST.
Quoted 8 lines
We'll just have to adjust the SST retraining code to deal with the MST encoders and multiple pipes.
TODO: I have a feeling we should just rip this all out and do a full modeset instead. Stuff like port sync and the tgl+ MST master transcoder stuff maybe doesn't work well if we try to retrain without following the proper modeset sequence. So far haven't done any actual tests to confirm that though.
Quoted 4 lines
To answer your feeling here: yes-we should, I have some branches for doing this sort of thing with i915 but they are ancient at this point. Once I get to fallback link retraining we should be able to use this in i915 to handle figuring out what all needs to be reset for an MST training.
Not sure what else we'd have to do but set connectors_changed=true on all the relevant connectors and commit.
Quoted 282 lines
fwiw - If you have some need for fallback link retraining soon I can move it up on my todo list for MST. I've got the hard design parts already figured out from the last time I tried implementing it, so writing new patches shouldn't be too difficult.
(note - this patch is still worth merging I'd imagine, since this looks like it should at least handle retraining an MST topology at the same link rate just fine)
Quoted 119 lines
Cc Lyude Paul <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/i915/display/intel_dp.c | 165 ++++++++++++++++++------ 1 file changed, 122 insertions(+), 43 deletions(-)drivers/gpu/drm/i915/display/intel_dp.c +68
-8@@ -5628,6 +5628,7 @@ static int intel_dp_check_mst_status(struct intel_dp *intel_dp) {struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +bool need_retrain = false;if (!intel_dp->is_mst)return -EINVAL ;@@ -5647,16 +5648,11 @@ intel_dp_check_mst_status(struct intel_dp *intel_dp) }/* check link status - esi[10] = 0x200c */ -/* -* FIXME kill this and use the SST retraining approach -* for MST as well. -*/ -if (intel_dp->active_mst_links >0 && +if (intel_dp->active_mst_links >0 && !need_retrain && !drm_dp_channel_eq_ok (&esi[10 ], intel_dp->lane_count)) {drm_dbg_kms (&i915->drm,"channel EQ not ok, retraining\n" ); -intel_dp_start_link_train (intel_dp); -intel_dp_stop_link_train (intel_dp); + need_retrain = true; }drm_dbg_kms (&i915->drm,"got esi %3ph\n" , esi);@@ -5676,7 +5672,7 @@ intel_dp_check_mst_status(struct intel_dp *intel_dp) } } -return 0 ; +return need_retrain; } static bool@@ -5713,20 +5709,102 @@ intel_dp_needs_link_retrain(struct intel_dp *intel_dp)return !drm_dp_channel_eq_ok (link_status, intel_dp->lane_count); } +static bool intel_dp_has_connector (struct intel_dp *intel_dp, +const struct drm_connector_state *conn_state) +{ +struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +struct intel_encoder *encoder; +enum pipe pipe; + +if (!conn_state->best_encoder) +return false; + +/* SST */ + encoder = &dp_to_dig_port (intel_dp)->base; +if (conn_state->best_encoder == &encoder->base) +return true; + +/* MST */ +for_each_pipe (i915, pipe) { + encoder = &intel_dp->mst_encoders[pipe]->base; +if (conn_state->best_encoder == &encoder->base) +return true; + } + +return false; +} + +static int intel_dp_prep_link_retrain (struct intel_dp *intel_dp, +struct drm_modeset_acquire_ctx *ctx, +u32 *crtc_mask) +{ +struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +struct drm_connector_list_iter conn_iter; +struct intel_connector *connector; +int ret =0 ; + + *crtc_mask =0 ; + +if (!intel_dp_needs_link_retrain (intel_dp)) +return 0 ; + +drm_connector_list_iter_begin (&i915->drm, &conn_iter); +for_each_intel_connector_iter (connector, &conn_iter) { +struct drm_connector_state *conn_state = + connector->base.state; +struct intel_crtc_state *crtc_state; +struct intel_crtc *crtc; + +if (!intel_dp_has_connector (intel_dp, conn_state)) +continue ; + + crtc =to_intel_crtc (conn_state->crtc); +if (!crtc) +continue ; + + ret =drm_modeset_lock (&crtc->base.mutex, ctx); +if (ret) +break ; + + crtc_state =to_intel_crtc_state (crtc->base.state); + +drm_WARN_ON (&i915->drm, !intel_crtc_has_dp_encoder (crtc_state)); + +if (!crtc_state->hw.active) +continue ; +drivers/gpu/drm/i915/display/intel_dp.c intel_dp_needs_link_retrain(struct intel_dp · line 5788
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp.c +10
-0+if (conn_state->commit && + !try_wait_for_completion (&conn_state->commit->hw_done)) +continue ; + + *crtc_mask |=drm_crtc_mask (&crtc->base); + } +drm_connector_list_iter_end (&conn_iter); + +if (!intel_dp_needs_link_retrain (intel_dp)) + *crtc_mask =0 ;Also fwiw ^ this is the kind of logic I was thinking for the MST helpers (e.g. having helpers (+ setting
link_statusfor each affected connector, etc. et.). again though-it's fine if this stays in i915 for now, but we should move it in the future.Quoted 133 lines
drivers/gpu/drm/i915/display/intel_dp.c +13
-6+ +return ret; +} + +static bool intel_dp_is_connected (struct intel_dp *intel_dp) +{ +struct intel_connector *connector = intel_dp->attached_connector; + +return connector->base.status == connector_status_connected || + intel_dp->is_mst; +} +int intel_dp_retrain_link (struct intel_encoder *encoder,struct drm_modeset_acquire_ctx *ctx) {struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);struct intel_dp *intel_dp =enc_to_intel_dp (encoder); - struct intel_connector *connector = intel_dp->attached_connector; - struct drm_connector_state *conn_state; - struct intel_crtc_state *crtc_state;struct intel_crtc *crtc; +u32 crtc_mask;int ret; - /* FIXME handle the MST connectors as well */ - - if (!connector || connector->base.status !=
connector_status_connected)drivers/gpu/drm/i915/display/intel_dp.c +17
-28+if (!intel_dp_is_connected (intel_dp))return 0 ; ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex,@@ -5734,46 +5812,42 @@ int intel_dp_retrain_link(struct intel_encoder *encoder, if (ret)return ret; - conn_state = connector->base.state; - - crtc =to_intel_crtc (conn_state->crtc); -if (!crtc) -return 0 ; - - ret =drm_modeset_lock (&crtc->base.mutex, ctx); + ret =intel_dp_prep_link_retrain (intel_dp, ctx, &crtc_mask);if (ret)return ret; - crtc_state =to_intel_crtc_state (crtc->base.state); - -drm_WARN_ON (&dev_priv->drm, !intel_crtc_has_dp_encoder (crtc_state)); - -if (!crtc_state->hw.active) +if (crtc_mask ==0 )return 0 ; -if (conn_state->commit && - !try_wait_for_completion (&conn_state->commit->hw_done)) -return 0 ; +drm_dbg_kms (&dev_priv->drm,"[ENCODER:%d:%s] retraining link\n" , + encoder->base.base.id, encoder->base.name); -if (!intel_dp_needs_link_retrain (intel_dp)) -return 0 ; +for_each_intel_crtc_mask (&dev_priv->drm, crtc, crtc_mask) { +const struct intel_crtc_state *crtc_state = +to_intel_crtc_state (crtc->base.state); -/* Suppress underruns caused by re-training */ -intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, false); -if (crtc_state->has_pch_encoder) -intel_set_pch_fifo_underrun_reporting (dev_priv, - intel_crtc_pch_transcode r(crtc), false); +/* Suppress underruns caused by re-training */ +intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, false); +if (crtc_state->has_pch_encoder) +intel_set_pch_fifo_underrun_reporting (dev_priv, + intel_crtc_pch_transcoder (crtc), false); + }intel_dp_start_link_train (intel_dp);intel_dp_stop_link_train (intel_dp); -/* Keep underrun reporting disabled until things are stable */ -intel_wait_for_vblank (dev_priv, crtc->pipe); +for_each_intel_crtc_mask (&dev_priv->drm, crtc, crtc_mask) { +const struct intel_crtc_state *crtc_state = +to_intel_crtc_state (crtc->base.state); -intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, true); -if (crtc_state->has_pch_encoder) -intel_set_pch_fifo_underrun_reporting (dev_priv, - intel_crtc_pch_transcoder(crtc), true);
drivers/gpu/drm/i915/display/intel_dp.c +4
-0+/* Keep underrun reporting disabled until things are stable */ +intel_wait_for_vblank (dev_priv, crtc->pipe); + + intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe,true);
drivers/gpu/drm/i915/display/intel_dp.c +3
-0+if (crtc_state->has_pch_encoder) +intel_set_pch_fifo_underrun_reporting (dev_priv, + intel_crtc_pch_transcoder(crtc), true);
drivers/gpu/drm/i915/display/intel_dp.c +3
-1+ }return 0 ; }@@ -7415,7 +7489,8 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) }if (intel_dp->is_mst) { -if (intel_dp_check_mst_status (intel_dp) == -EINVAL ) { +switch (intel_dp_check_mst_status (intel_dp)) { +case -EINVAL :/* * If we were in MST mode, and device is not drivers/gpu/drm/i915/display/intel_dp.c +4
-0* there, get out of MST mode @@ -7429,6 +7504,10 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) intel_dp->is_mst);return IRQ_NONE ; +case 1 : +return IRQ_NONE ; +default : +break ; } }Signature · 3 lines
Cheers, Lyude Paul (she/her) Associate Software Engineer at Red Hat
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH 2/2] drm/i915: Push MST link retraining to the hotplug work
Quoted 17 lines · Ville Syrjälä
Quoted 16 lines · Lyude Paul
Quoted 14 lines · Ville Syrjala
From: Ville Syrjälä <[email protected]>
We shouldn't try to do link retraining from the short hpd handler. We can't take any modeset locks there so this is racy as hell. Push the whole thing into the hotplug work like we do with SST.
We'll just have to adjust the SST retraining code to deal with the MST encoders and multiple pipes.
TODO: I have a feeling we should just rip this all out and do a full modeset instead. Stuff like port sync and the tgl+ MST master transcoder stuff maybe doesn't work well if we try to retrain without following the proper modeset sequence. So far haven't done any actual tests to confirm that though.
Quoted 8 lines
Quoted 5 lines
To answer your feeling here: yes-we should, I have some branches for doing this sort of thing with i915 but they are ancient at this point. Once I get to
fallback link retraining we should be able to use this in i915 to handle figuring out what all needs to be reset for an MST training.Not sure what else we'd have to do but set connectors_changed=true on all the relevant connectors and commit.
Well that's all that needs to be done in this patch, since it only handles the case where we need to retrain the link at the same link rate as before. On hardware that ends up having a lower link rate then it reported though (I've unfortunately seen this happen with some DP concentrators + MST hubs), we'd also need to go through and recalculate the bandwidth requirements for each connector on the topology to figure out if they need to have their display configuration changed (and as such-we would set link_status=bad) or not in order to fit in the new bw constraints
Quoted 290 lines
Quoted 290 lines
fwiw - If you have some need for fallback link retraining soon I can move it
up on my todo list for MST. I've got the hard design parts already figured out
from the last time I tried implementing it, so writing new patches shouldn't
be too difficult.(note - this patch is still worth merging I'd imagine, since this looks like
it should at least handle retraining an MST topology at the same link rate just fine)Quoted 120 lines
Cc Lyude Paul <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/i915/display/intel_dp.c | 165 ++++++++++++++++++------ 1 file changed, 122 insertions(+), 43 deletions(-)drivers/gpu/drm/i915/display/intel_dp.c +3
-7@@ -5628,6 +5628,7 @@ static int intel_dp_check_mst_status(struct intel_dp *intel_dp) {struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +bool need_retrain = false;if (!intel_dp->is_mst)return -EINVAL ;@@ -5647,16 +5648,11 @@ intel_dp_check_mst_status(struct intel_dp *intel_dp) }/* check link status - esi[10] = 0x200c */ -/* -* FIXME kill this and use the SST retraining approach -* for MST as well. -*/ -if (intel_dp->active_mst_links >0 && +if (intel_dp->active_mst_links >0 && !need_retrain && !drm_dp_channel_eq_ok (&esi[10 ], intel_dp->lane_count)) {drm_dbg_kms (&i915->drm,"channel EQ not ok, retraining\n" ); -intel_dp_start_link_train (intel_dp); -intel_dp_stop_link_train (intel_dp); + need_retrain = true; }drivers/gpu/drm/i915/display/intel_dp.c +1
-1drm_dbg_kms (&i915->drm,"got esi %3ph\n" , esi);@@ -5676,7 +5672,7 @@ intel_dp_check_mst_status(struct intel_dp *intel_dp) } } -return 0 ; +return need_retrain; }static bool
drivers/gpu/drm/i915/display/intel_dp.c +64
-0@@ -5713,20 +5709,102 @@ intel_dp_needs_link_retrain(struct intel_dp *intel_dp)return !drm_dp_channel_eq_ok (link_status, intel_dp->lane_count); } +static bool intel_dp_has_connector (struct intel_dp *intel_dp, +const struct drm_connector_state *conn_state) +{ +struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +struct intel_encoder *encoder; +enum pipe pipe; + +if (!conn_state->best_encoder) +return false; + +/* SST */ + encoder = &dp_to_dig_port (intel_dp)->base; +if (conn_state->best_encoder == &encoder->base) +return true; + +/* MST */ +for_each_pipe (i915, pipe) { + encoder = &intel_dp->mst_encoders[pipe]->base; +if (conn_state->best_encoder == &encoder->base) +return true; + } + +return false; +} + +static int intel_dp_prep_link_retrain (struct intel_dp *intel_dp, +struct drm_modeset_acquire_ctx *ctx, +u32 *crtc_mask) +{ +struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +struct drm_connector_list_iter conn_iter; +struct intel_connector *connector; +int ret =0 ; + + *crtc_mask =0 ; + +if (!intel_dp_needs_link_retrain (intel_dp)) +return 0 ; + +drm_connector_list_iter_begin (&i915->drm, &conn_iter); +for_each_intel_connector_iter (connector, &conn_iter) { +struct drm_connector_state *conn_state = + connector->base.state; +struct intel_crtc_state *crtc_state; +struct intel_crtc *crtc; + +if (!intel_dp_has_connector (intel_dp, conn_state)) +continue ; + + crtc =to_intel_crtc (conn_state->crtc); +if (!crtc) +continue ; + + ret =drm_modeset_lock (&crtc->base.mutex, ctx); +if (ret) +break ; + + crtc_state =to_intel_crtc_state (crtc->base.state); + +drm_WARN_ON (&i915->drm, !intel_crtc_has_dp_encoder (crtc_state)); + +if (!crtc_state->hw.active) +continue ; +drivers/gpu/drm/i915/display/intel_dp.c intel_dp_needs_link_retrain(struct intel_dp · line 5788
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp.c +10
-0+if (conn_state->commit && + !try_wait_for_completion (&conn_state->commit->hw_done)) +continue ; + + *crtc_mask |=drm_crtc_mask (&crtc->base); + } +drm_connector_list_iter_end (&conn_iter); + +if (!intel_dp_needs_link_retrain (intel_dp)) + *crtc_mask =0 ;Also fwiw ^ this is the kind of logic I was thinking for the MST helpers (e.g.
having helpers (+ settinglink_statusfor each affected connector, etc. et.).
again though-it's fine if this stays in i915 for now, but we should move it in
the future.Quoted 133 lines
drivers/gpu/drm/i915/display/intel_dp.c +13
-6+ +return ret; +} + +static bool intel_dp_is_connected (struct intel_dp *intel_dp) +{ +struct intel_connector *connector = intel_dp->attached_connector; + +return connector->base.status == connector_status_connected || + intel_dp->is_mst; +} +int intel_dp_retrain_link (struct intel_encoder *encoder,struct drm_modeset_acquire_ctx *ctx) {struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);struct intel_dp *intel_dp =enc_to_intel_dp (encoder); - struct intel_connector *connector = intel_dp->attached_connector; - struct drm_connector_state *conn_state; - struct intel_crtc_state *crtc_state;struct intel_crtc *crtc; +u32 crtc_mask;int ret; - /* FIXME handle the MST connectors as well */ - - if (!connector || connector->base.status !=
connector_status_connected)drivers/gpu/drm/i915/display/intel_dp.c +17
-28+if (!intel_dp_is_connected (intel_dp))return 0 ; ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex,@@ -5734,46 +5812,42 @@ int intel_dp_retrain_link(struct intel_encoder *encoder, if (ret)return ret; - conn_state = connector->base.state; - - crtc =to_intel_crtc (conn_state->crtc); -if (!crtc) -return 0 ; - - ret =drm_modeset_lock (&crtc->base.mutex, ctx); + ret =intel_dp_prep_link_retrain (intel_dp, ctx, &crtc_mask);if (ret)return ret; - crtc_state =to_intel_crtc_state (crtc->base.state); - -drm_WARN_ON (&dev_priv->drm, !intel_crtc_has_dp_encoder (crtc_state)); - -if (!crtc_state->hw.active) +if (crtc_mask ==0 )return 0 ; -if (conn_state->commit && - !try_wait_for_completion (&conn_state->commit->hw_done)) -return 0 ; +drm_dbg_kms (&dev_priv->drm,"[ENCODER:%d:%s] retraining link\n" , + encoder->base.base.id, encoder->base.name); -if (!intel_dp_needs_link_retrain (intel_dp)) -return 0 ; +for_each_intel_crtc_mask (&dev_priv->drm, crtc, crtc_mask) { +const struct intel_crtc_state *crtc_state = +to_intel_crtc_state (crtc->base.state); -/* Suppress underruns caused by re-training */ -intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, false); -if (crtc_state->has_pch_encoder) -intel_set_pch_fifo_underrun_reporting (dev_priv, - intel_crtc_pch_transcode r(crtc), false); +/* Suppress underruns caused by re-training */ +intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, false); +if (crtc_state->has_pch_encoder) +intel_set_pch_fifo_underrun_reporting (dev_priv, + intel_crtc_pch_transcoder (crtc), false); + }intel_dp_start_link_train (intel_dp);intel_dp_stop_link_train (intel_dp); -/* Keep underrun reporting disabled until things are stable */ -intel_wait_for_vblank (dev_priv, crtc->pipe); +for_each_intel_crtc_mask (&dev_priv->drm, crtc, crtc_mask) { +const struct intel_crtc_state *crtc_state = +to_intel_crtc_state (crtc->base.state); -intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, true); -if (crtc_state->has_pch_encoder) -intel_set_pch_fifo_underrun_reporting (dev_priv, - intel_crtc_pch_transcoder(crtc), true);
drivers/gpu/drm/i915/display/intel_dp.c +4
-0+/* Keep underrun reporting disabled until things are stable */ +intel_wait_for_vblank (dev_priv, crtc->pipe); + + intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe,true);
drivers/gpu/drm/i915/display/intel_dp.c +3
-0+if (crtc_state->has_pch_encoder) +intel_set_pch_fifo_underrun_reporting (dev_priv, + intel_crtc_pch_transcoder(crtc), true);
drivers/gpu/drm/i915/display/intel_dp.c +3
-1+ }return 0 ; }@@ -7415,7 +7489,8 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) }if (intel_dp->is_mst) { -if (intel_dp_check_mst_status (intel_dp) == -EINVAL ) { +switch (intel_dp_check_mst_status (intel_dp)) { +case -EINVAL :/* * If we were in MST mode, and device is not drivers/gpu/drm/i915/display/intel_dp.c +4
-0* there, get out of MST mode @@ -7429,6 +7504,10 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) intel_dp->is_mst);return IRQ_NONE ; +case 1 : +return IRQ_NONE ; +default : +break ; } }Signature · 3 lines
Cheers, Lyude Paul (she/her) Associate Software Engineer at Red Hat
Signature · 8 lines
Cheers, Lyude Paul (she/her) Associate Software Engineer at Red Hat _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH 2/2] drm/i915: Push MST link retraining to the hotplug work
Quoted 27 lines · Lyude Paul
Quoted 17 lines · Ville Syrjälä
Quoted 16 lines · Lyude Paul
Quoted 14 lines · Ville Syrjala
From: Ville Syrjälä <[email protected]>
We shouldn't try to do link retraining from the short hpd handler. We can't take any modeset locks there so this is racy as hell. Push the whole thing into the hotplug work like we do with SST.
We'll just have to adjust the SST retraining code to deal with the MST encoders and multiple pipes.
TODO: I have a feeling we should just rip this all out and do a full modeset instead. Stuff like port sync and the tgl+ MST master transcoder stuff maybe doesn't work well if we try to retrain without following the proper modeset sequence. So far haven't done any actual tests to confirm that though.
Quoted 8 lines
Quoted 5 lines
To answer your feeling here: yes-we should, I have some branches for doing this sort of thing with i915 but they are ancient at this point. Once I get to
fallback link retraining we should be able to use this in i915 to handle figuring out what all needs to be reset for an MST training.Not sure what else we'd have to do but set connectors_changed=true on all the relevant connectors and commit.
Quoted 8 lines
Well that's all that needs to be done in this patch, since it only handles the case where we need to retrain the link at the same link rate as before. On hardware that ends up having a lower link rate then it reported though (I've unfortunately seen this happen with some DP concentrators + MST hubs), we'd also need to go through and recalculate the bandwidth requirements for each connector on the topology to figure out if they need to have their display configuration changed (and as such-we would set link_status=bad) or not in order to fit in the new bw constraints
Yeah, the whole MST bandwidth calculation is currently non-existent, which is why I had to revert the deep color stuff for MST. So far my simplistic plan for that (should I ever get to it), would be to just cap the bpp across all streams, then keep looping the state computation while reducing the bpp cap until everything fits. Not entirely optimal in all cases but should work and should be pretty easy to implement.
And as far as training at a lower clock/lanes, we should have the driver provide that information to the topology mgr. Currently it just assumes it can use as much as the DPCD caps indicate. With that the reduction stuff i915 already does for SST should just work (tm).
Quoted 294 lines
Quoted 290 lines
Quoted 290 lines
fwiw - If you have some need for fallback link retraining soon I can move it
up on my todo list for MST. I've got the hard design parts already figured out
from the last time I tried implementing it, so writing new patches shouldn't
be too difficult.(note - this patch is still worth merging I'd imagine, since this looks like
it should at least handle retraining an MST topology at the same link rate just fine)Quoted 120 lines
Cc Lyude Paul <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/i915/display/intel_dp.c | 165 ++++++++++++++++++------ 1 file changed, 122 insertions(+), 43 deletions(-)drivers/gpu/drm/i915/display/intel_dp.c +3
-7@@ -5628,6 +5628,7 @@ static int intel_dp_check_mst_status(struct intel_dp *intel_dp) {struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +bool need_retrain = false;if (!intel_dp->is_mst)return -EINVAL ;@@ -5647,16 +5648,11 @@ intel_dp_check_mst_status(struct intel_dp *intel_dp) }/* check link status - esi[10] = 0x200c */ -/* -* FIXME kill this and use the SST retraining approach -* for MST as well. -*/ -if (intel_dp->active_mst_links >0 && +if (intel_dp->active_mst_links >0 && !need_retrain && !drm_dp_channel_eq_ok (&esi[10 ], intel_dp->lane_count)) {drm_dbg_kms (&i915->drm,"channel EQ not ok, retraining\n" ); -intel_dp_start_link_train (intel_dp); -intel_dp_stop_link_train (intel_dp); + need_retrain = true; }drivers/gpu/drm/i915/display/intel_dp.c +1
-1drm_dbg_kms (&i915->drm,"got esi %3ph\n" , esi);@@ -5676,7 +5672,7 @@ intel_dp_check_mst_status(struct intel_dp *intel_dp) } } -return 0 ; +return need_retrain; }static bool
drivers/gpu/drm/i915/display/intel_dp.c +64
-0@@ -5713,20 +5709,102 @@ intel_dp_needs_link_retrain(struct intel_dp *intel_dp)return !drm_dp_channel_eq_ok (link_status, intel_dp->lane_count); } +static bool intel_dp_has_connector (struct intel_dp *intel_dp, +const struct drm_connector_state *conn_state) +{ +struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +struct intel_encoder *encoder; +enum pipe pipe; + +if (!conn_state->best_encoder) +return false; + +/* SST */ + encoder = &dp_to_dig_port (intel_dp)->base; +if (conn_state->best_encoder == &encoder->base) +return true; + +/* MST */ +for_each_pipe (i915, pipe) { + encoder = &intel_dp->mst_encoders[pipe]->base; +if (conn_state->best_encoder == &encoder->base) +return true; + } + +return false; +} + +static int intel_dp_prep_link_retrain (struct intel_dp *intel_dp, +struct drm_modeset_acquire_ctx *ctx, +u32 *crtc_mask) +{ +struct drm_i915_private *i915 =dp_to_i915 (intel_dp); +struct drm_connector_list_iter conn_iter; +struct intel_connector *connector; +int ret =0 ; + + *crtc_mask =0 ; + +if (!intel_dp_needs_link_retrain (intel_dp)) +return 0 ; + +drm_connector_list_iter_begin (&i915->drm, &conn_iter); +for_each_intel_connector_iter (connector, &conn_iter) { +struct drm_connector_state *conn_state = + connector->base.state; +struct intel_crtc_state *crtc_state; +struct intel_crtc *crtc; + +if (!intel_dp_has_connector (intel_dp, conn_state)) +continue ; + + crtc =to_intel_crtc (conn_state->crtc); +if (!crtc) +continue ; + + ret =drm_modeset_lock (&crtc->base.mutex, ctx); +if (ret) +break ; + + crtc_state =to_intel_crtc_state (crtc->base.state); + +drm_WARN_ON (&i915->drm, !intel_crtc_has_dp_encoder (crtc_state)); + +if (!crtc_state->hw.active) +continue ; +drivers/gpu/drm/i915/display/intel_dp.c intel_dp_needs_link_retrain(struct intel_dp · line 5788
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp.c +10
-0+if (conn_state->commit && + !try_wait_for_completion (&conn_state->commit->hw_done)) +continue ; + + *crtc_mask |=drm_crtc_mask (&crtc->base); + } +drm_connector_list_iter_end (&conn_iter); + +if (!intel_dp_needs_link_retrain (intel_dp)) + *crtc_mask =0 ;Also fwiw ^ this is the kind of logic I was thinking for the MST helpers (e.g.
having helpers (+ settinglink_statusfor each affected connector, etc. et.).
again though-it's fine if this stays in i915 for now, but we should move it in
the future.Quoted 133 lines
drivers/gpu/drm/i915/display/intel_dp.c +13
-6+ +return ret; +} + +static bool intel_dp_is_connected (struct intel_dp *intel_dp) +{ +struct intel_connector *connector = intel_dp->attached_connector; + +return connector->base.status == connector_status_connected || + intel_dp->is_mst; +} +int intel_dp_retrain_link (struct intel_encoder *encoder,struct drm_modeset_acquire_ctx *ctx) {struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev);struct intel_dp *intel_dp =enc_to_intel_dp (encoder); - struct intel_connector *connector = intel_dp->attached_connector; - struct drm_connector_state *conn_state; - struct intel_crtc_state *crtc_state;struct intel_crtc *crtc; +u32 crtc_mask;int ret; - /* FIXME handle the MST connectors as well */ - - if (!connector || connector->base.status !=
connector_status_connected)drivers/gpu/drm/i915/display/intel_dp.c +17
-28+if (!intel_dp_is_connected (intel_dp))return 0 ; ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex,@@ -5734,46 +5812,42 @@ int intel_dp_retrain_link(struct intel_encoder *encoder, if (ret)return ret; - conn_state = connector->base.state; - - crtc =to_intel_crtc (conn_state->crtc); -if (!crtc) -return 0 ; - - ret =drm_modeset_lock (&crtc->base.mutex, ctx); + ret =intel_dp_prep_link_retrain (intel_dp, ctx, &crtc_mask);if (ret)return ret; - crtc_state =to_intel_crtc_state (crtc->base.state); - -drm_WARN_ON (&dev_priv->drm, !intel_crtc_has_dp_encoder (crtc_state)); - -if (!crtc_state->hw.active) +if (crtc_mask ==0 )return 0 ; -if (conn_state->commit && - !try_wait_for_completion (&conn_state->commit->hw_done)) -return 0 ; +drm_dbg_kms (&dev_priv->drm,"[ENCODER:%d:%s] retraining link\n" , + encoder->base.base.id, encoder->base.name); -if (!intel_dp_needs_link_retrain (intel_dp)) -return 0 ; +for_each_intel_crtc_mask (&dev_priv->drm, crtc, crtc_mask) { +const struct intel_crtc_state *crtc_state = +to_intel_crtc_state (crtc->base.state); -/* Suppress underruns caused by re-training */ -intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, false); -if (crtc_state->has_pch_encoder) -intel_set_pch_fifo_underrun_reporting (dev_priv, - intel_crtc_pch_transcode r(crtc), false); +/* Suppress underruns caused by re-training */ +intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, false); +if (crtc_state->has_pch_encoder) +intel_set_pch_fifo_underrun_reporting (dev_priv, + intel_crtc_pch_transcoder (crtc), false); + }intel_dp_start_link_train (intel_dp);intel_dp_stop_link_train (intel_dp); -/* Keep underrun reporting disabled until things are stable */ -intel_wait_for_vblank (dev_priv, crtc->pipe); +for_each_intel_crtc_mask (&dev_priv->drm, crtc, crtc_mask) { +const struct intel_crtc_state *crtc_state = +to_intel_crtc_state (crtc->base.state); -intel_set_cpu_fifo_underrun_reporting (dev_priv, crtc->pipe, true); -if (crtc_state->has_pch_encoder) -intel_set_pch_fifo_underrun_reporting (dev_priv, - intel_crtc_pch_transcoder(crtc), true);
drivers/gpu/drm/i915/display/intel_dp.c +4
-0+/* Keep underrun reporting disabled until things are stable */ +intel_wait_for_vblank (dev_priv, crtc->pipe); + + intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe,true);
drivers/gpu/drm/i915/display/intel_dp.c +3
-0+if (crtc_state->has_pch_encoder) +intel_set_pch_fifo_underrun_reporting (dev_priv, + intel_crtc_pch_transcoder(crtc), true);
drivers/gpu/drm/i915/display/intel_dp.c +3
-1+ }return 0 ; }@@ -7415,7 +7489,8 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) }if (intel_dp->is_mst) { -if (intel_dp_check_mst_status (intel_dp) == -EINVAL ) { +switch (intel_dp_check_mst_status (intel_dp)) { +case -EINVAL :/* * If we were in MST mode, and device is not drivers/gpu/drm/i915/display/intel_dp.c +4
-0* there, get out of MST mode @@ -7429,6 +7504,10 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd) intel_dp->is_mst);return IRQ_NONE ; +case 1 : +return IRQ_NONE ; +default : +break ; } }Signature · 3 lines
Cheers, Lyude Paul (she/her) Associate Software Engineer at Red HatSignature · 3 lines
Cheers, Lyude Paul (she/her) Associate Software Engineer at Red Hat
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 136 lines · Ville Syrjala
From: Ville Syrjälä <[email protected]>
Make
intel_dp_check_mst_status()somewhat legible by humans.Note that the return value of
drm_dp_mst_hpd_irq()is always either 0 or-ENOMEM, and we never did anything with the latter so we can just ignore the whole thing.We can also get rid of the direct
drm_dp_mst_topology_mgr_set_mst(false)call since returning-EINVALcauses the caller to do the very same call for us.Cc Lyude Paul <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/i915/display/intel_dp.c | 88 ++++++++++++------------- 1 file changed, 41 insertions(+), 47 deletions(-)drivers/gpu/drm/i915/display/intel_dp.c +41
-47@@ -5628,61 +5628,55 @@ static int intel_dp_check_mst_status(struct intel_dp *intel_dp) {struct drm_i915_private *i915 =dp_to_i915 (intel_dp); -bool bret; -if (intel_dp->is_mst) { -u8 esi[DP_DPRX_ESI_LEN ] = {0 }; -int ret =0 ; +if (!intel_dp->is_mst) +return -EINVAL ; + +WARN_ON_ONCE (intel_dp->active_mst_links <0 ); + +for (;;) { +u8 esi[DP_DPRX_ESI_LEN ] = {}; +bool bret, handled;int retry; -bool handled; -WARN_ON_ONCE (intel_dp->active_mst_links <0 ); bret =intel_dp_get_sink_irq_esi (intel_dp, esi); -go_again: -if (bret == true) { - -/* check link status - esi[10] = 0x200c */ -if (intel_dp->active_mst_links >0 && - !drm_dp_channel_eq_ok (&esi[10 ], intel_dp- >lane_count)) { -drm_dbg_kms (&i915->drm, -"channel EQ not ok, retraining\n"); -intel_dp_start_link_train (intel_dp); -intel_dp_stop_link_train (intel_dp); - } - -drm_dbg_kms (&i915->drm,"got esi %3ph\n" , esi); - ret =drm_dp_mst_hpd_irq (&intel_dp->mst_mgr, esi, &handled); - -if (handled) { -for (retry =0 ; retry <3 ; retry++) { -int wret; - wret =drm_dp_dpcd_write (&intel_dp- >aux, - DP_SINK_COUNT _ESI+1 , - &esi[1 ],3 ); -if (wret ==3 ) { -break ; - } - } - - bret =intel_dp_get_sink_irq_esi (intel_dp, esi); -if (bret == true) { -drm_dbg_kms (&i915->drm, -"got esi2 %3ph\n" , esi); - goto go_again; - } - }else - ret =0 ; - -return ret; - }else { +if (!bret) {drm_dbg_kms (&i915->drm,"failed to get ESI - device may have failed\n"); - intel_dp->is_mst = false; -drm_dp_mst_topology_mgr_set_mst (&intel_dp->mst_mgr, - intel_dp->is_mst); +return -EINVAL ; + } + +/* check link status - esi[10] = 0x200c */ +/* +* FIXME kill this and use the SST retraining approach +* for MST as well. +*/ +if (intel_dp->active_mst_links >0 && + !drm_dp_channel_eq_ok (&esi[10 ], intel_dp->lane_count)) { +drm_dbg_kms (&i915->drm, +"channel EQ not ok, retraining\n" ); +intel_dp_start_link_train (intel_dp); +intel_dp_stop_link_train (intel_dp); + } + +drm_dbg_kms (&i915->drm,"got esi %3ph\n" , esi); + +drm_dp_mst_hpd_irq (&intel_dp->mst_mgr, esi, &handled); +if (!handled) +break ; + +for (retry =0 ; retry <3 ; retry++) { +int wret; + + wret =drm_dp_dpcd_write (&intel_dp->aux, +DP_SINK_COUNT_ESI +1 , + &esi[1 ],3 ); +if (wret ==3 ) +break ; } } -return -EINVAL ; + +return 0 ; } static boolSignature · 1 line
2.24.1
Signature · 8 lines
Cheers, Lyude Paul (she/her) Associate Software Engineer at Red Hat _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 2 lines · Lyude Paul
Reviewed-by Lyude Paul <[email protected]>
Thanks. Series pushed to dinq.
Quoted 141 lines · Ville Syrjala
Quoted 136 lines
From: Ville Syrjälä <[email protected]>
Make
intel_dp_check_mst_status()somewhat legible by humans.Note that the return value of
drm_dp_mst_hpd_irq()is always either 0 or-ENOMEM, and we never did anything with the latter so we can just ignore the whole thing.We can also get rid of the direct
drm_dp_mst_topology_mgr_set_mst(false)call since returning-EINVALcauses the caller to do the very same call for us.Cc Lyude Paul <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/i915/display/intel_dp.c | 88 ++++++++++++------------- 1 file changed, 41 insertions(+), 47 deletions(-)drivers/gpu/drm/i915/display/intel_dp.c +41
-47@@ -5628,61 +5628,55 @@ static int intel_dp_check_mst_status(struct intel_dp *intel_dp) {struct drm_i915_private *i915 =dp_to_i915 (intel_dp); -bool bret; -if (intel_dp->is_mst) { -u8 esi[DP_DPRX_ESI_LEN ] = {0 }; -int ret =0 ; +if (!intel_dp->is_mst) +return -EINVAL ; + +WARN_ON_ONCE (intel_dp->active_mst_links <0 ); + +for (;;) { +u8 esi[DP_DPRX_ESI_LEN ] = {}; +bool bret, handled;int retry; -bool handled; -WARN_ON_ONCE (intel_dp->active_mst_links <0 ); bret =intel_dp_get_sink_irq_esi (intel_dp, esi); -go_again: -if (bret == true) { - -/* check link status - esi[10] = 0x200c */ -if (intel_dp->active_mst_links >0 && - !drm_dp_channel_eq_ok (&esi[10 ], intel_dp- >lane_count)) { -drm_dbg_kms (&i915->drm, -"channel EQ not ok, retraining\n"); -intel_dp_start_link_train (intel_dp); -intel_dp_stop_link_train (intel_dp); - } - -drm_dbg_kms (&i915->drm,"got esi %3ph\n" , esi); - ret =drm_dp_mst_hpd_irq (&intel_dp->mst_mgr, esi, &handled); - -if (handled) { -for (retry =0 ; retry <3 ; retry++) { -int wret; - wret =drm_dp_dpcd_write (&intel_dp- >aux, - DP_SINK_COUNT _ESI+1 , - &esi[1 ],3 ); -if (wret ==3 ) { -break ; - } - } - - bret =intel_dp_get_sink_irq_esi (intel_dp, esi); -if (bret == true) { -drm_dbg_kms (&i915->drm, -"got esi2 %3ph\n" , esi); - goto go_again; - } - }else - ret =0 ; - -return ret; - }else { +if (!bret) {drm_dbg_kms (&i915->drm,"failed to get ESI - device may have failed\n"); - intel_dp->is_mst = false; -drm_dp_mst_topology_mgr_set_mst (&intel_dp->mst_mgr, - intel_dp->is_mst); +return -EINVAL ; + } + +/* check link status - esi[10] = 0x200c */ +/* +* FIXME kill this and use the SST retraining approach +* for MST as well. +*/ +if (intel_dp->active_mst_links >0 && + !drm_dp_channel_eq_ok (&esi[10 ], intel_dp->lane_count)) { +drm_dbg_kms (&i915->drm, +"channel EQ not ok, retraining\n" ); +intel_dp_start_link_train (intel_dp); +intel_dp_stop_link_train (intel_dp); + } + +drm_dbg_kms (&i915->drm,"got esi %3ph\n" , esi); + +drm_dp_mst_hpd_irq (&intel_dp->mst_mgr, esi, &handled); +if (!handled) +break ; + +for (retry =0 ; retry <3 ; retry++) { +int wret; + + wret =drm_dp_dpcd_write (&intel_dp->aux, +DP_SINK_COUNT_ESI +1 , + &esi[1 ],3 ); +if (wret ==3 ) +break ; } } -return -EINVAL ; + +return 0 ; } static boolSignature · 1 line
2.24.1Signature · 3 lines
Cheers, Lyude Paul (she/her) Associate Software Engineer at Red Hat
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/2] drm/i915: Flatten intel_dp_check_mst_status() a bit
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915: Flatten intel_dp_check_mst_status() a bit
URL : https://patchwork.freedesktop.org/series/76105/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip d7fc81461f35 drm/i915: Flatten intel_dp_check_mst_status() a bit -:117: CHECK:SPACING: spaces preferred around that '+' (ctx:VxV) #117: FILE: drivers/gpu/drm/i915/display/intel_dp.c:5669: + DP_SINK_COUNT_ESI+1, ^
total: 0 errors, 0 warnings, 1 checks, 101 lines checked bdd0a32afab1 drm/i915: Push MST link retraining to the hotplug work -:219: WARNING:LONG_LINE: line over 100 characters
#219: FILE: drivers/gpu/drm/i915/display/intel_dp.c:5830:
+ intel_crtc_pch_transcoder(crtc), false);
-:241: WARNING:LONG_LINE: line over 100 characters #241: FILE: drivers/gpu/drm/i915/display/intel_dp.c:5846:
+ intel_crtc_pch_transcoder(crtc), true);
total: 0 errors, 2 warnings, 0 checks, 230 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✗ Fi.CI.DOCS: warning for series starting with [1/2] drm/i915: Flatten intel_dp_check_mst_status() a bit
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915: Flatten intel_dp_check_mst_status() a bit
URL : https://patchwork.freedesktop.org/series/76105/
State : warning
== Summary ==
$ make htmldocs 2>&1 > /dev/null | grep i915 /home/cidrm/kernel/Documentation/gpu/i915.rst:610: WARNING: duplicate label gpu/i915:layout, other instance in /home/cidrm/kernel/Documentation/gpu/i915.rst
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915: Flatten intel_dp_check_mst_status() a bit
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915: Flatten intel_dp_check_mst_status() a bit
URL : https://patchwork.freedesktop.org/series/76105/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_8322 -> Patchwork_17356
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/index.html
Changes
-------
No changes found
Participating hosts (51 -> 46)
------------------------------
Additional (1): fi-cml-u2
Missing (6): fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus
Build changes
-------------
* CI: CI-20190529 -> None
* Linux: CI_DRM_8322 -> Patchwork_17356
CI-20190529: 20190529
CI_DRM_8322: fd447e6b1ee13e6a9731bddc7694552640e8a01e @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5599: cdb07101dda33e2fcb0f4c2aa199c47159d88f35 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_17356: bdd0a32afab1c4234d6476e1e86ea4c0ef73a2f4 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
bdd0a32afab1 drm/i915: Push MST link retraining to the hotplug work d7fc81461f35 drm/i915: Flatten intel_dp_check_mst_status() a bit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✓ Fi.CI.IGT: success for series starting with [1/2] drm/i915: Flatten intel_dp_check_mst_status() a bit
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915: Flatten intel_dp_check_mst_status() a bit
URL : https://patchwork.freedesktop.org/series/76105/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_8322_full -> Patchwork_17356_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
Known issues
------------
Here are the changes found in Patchwork_17356_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@i915_selftest@live@requests:
- shard-tglb: [PASS][1] -> [INCOMPLETE][2] ([i915#1531] / [i915#1658])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-tglb5/igt@i915_selftest@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-tglb8/igt@i915_selftest@[email protected]
* igt@kms_cursor_crc@pipe-a-cursor-128x42-random:
- shard-kbl: [PASS][3] -> [FAIL][4] ([i915#54] / [i915#93] / [i915#95])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-kbl1/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-kbl7/igt@[email protected]
* igt@kms_dp_dsc@basic-dsc-enable-edp:
- shard-iclb: [PASS][5] -> [SKIP][6] ([fdo#109349])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-iclb2/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-iclb6/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-suspend:
- shard-kbl: [PASS][7] -> [INCOMPLETE][8] ([i915#155])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-kbl7/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-kbl1/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbcpsr-rgb101010-draw-render:
- shard-tglb: [PASS][9] -> [SKIP][10] ([i915#668]) +6 similar issues
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-tglb1/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-tglb6/igt@[email protected]
* igt@kms_mmap_write_crc@main:
- shard-kbl: [PASS][11] -> [FAIL][12] ([i915#93] / [i915#95])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-kbl4/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-kbl1/igt@[email protected]
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
- shard-skl: [PASS][13] -> [INCOMPLETE][14] ([i915#69])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-skl3/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-skl9/igt@[email protected]
* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-b-planes:
- shard-iclb: [PASS][15] -> [INCOMPLETE][16] ([i915#1185] / [i915#250])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-iclb7/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-iclb3/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-c-coverage-7efc:
- shard-skl: [PASS][17] -> [FAIL][18] ([fdo#108145] / [i915#265])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-skl8/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-skl3/igt@[email protected]
* igt@kms_plane_multiple@atomic-pipe-a-tiling-y:
- shard-apl: [PASS][19] -> [FAIL][20] ([i915#95])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-apl3/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-apl1/igt@[email protected]
* igt@kms_psr@psr2_cursor_render:
- shard-iclb: [PASS][21] -> [SKIP][22] ([fdo#109441]) +1 similar issue
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-iclb2/igt@kms_psr@psr2_cursor_render.html
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-iclb4/igt@kms_psr@psr2_cursor_render.html
* igt@kms_setmode@basic:
- shard-skl: [PASS][23] -> [FAIL][24] ([i915#31])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-skl7/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-skl6/igt@[email protected]
- shard-kbl: [PASS][25] -> [FAIL][26] ([i915#31])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-kbl6/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-kbl7/igt@[email protected]
* igt@kms_vblank@pipe-a-ts-continuation-suspend:
- shard-apl: [PASS][27] -> [DMESG-WARN][28] ([i915#180]) +2 similar issues
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-apl1/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-apl2/igt@[email protected]
#### Possible fixes ####
* igt@gen9_exec_parse@allowed-all:
- shard-glk: [DMESG-WARN][29] ([i915#716]) -> [PASS][30]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-glk8/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-glk6/igt@[email protected]
* igt@kms_cursor_crc@pipe-a-cursor-128x42-offscreen:
- shard-apl: [FAIL][31] ([i915#54] / [i915#95]) -> [PASS][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-apl6/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-apl3/igt@[email protected]
* igt@kms_cursor_crc@pipe-b-cursor-suspend:
- shard-skl: [INCOMPLETE][33] ([i915#300]) -> [PASS][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-skl1/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-skl5/igt@[email protected]
* igt@kms_draw_crc@draw-method-rgb565-render-ytiled:
- shard-glk: [FAIL][35] ([i915#52] / [i915#54]) -> [PASS][36]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-glk6/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-glk8/igt@[email protected]
* {igt@kms_flip@flip-vs-expired-vblank-interruptible@c-edp1}:
- shard-skl: [FAIL][37] ([i915#79]) -> [PASS][38] +1 similar issue
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-skl8/igt@kms_flip@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-skl1/igt@kms_flip@[email protected]
* {igt@kms_flip@flip-vs-suspend-interruptible@c-dp1}:
- shard-apl: [DMESG-WARN][39] ([i915#180]) -> [PASS][40] +4 similar issues
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-apl3/igt@kms_flip@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-apl3/igt@kms_flip@[email protected]
* {igt@kms_flip@plain-flip-ts-check@c-edp1}:
- shard-skl: [FAIL][41] ([i915#34]) -> [PASS][42]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-skl9/igt@kms_flip@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-skl8/igt@kms_flip@[email protected]
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- shard-kbl: [DMESG-WARN][43] ([i915#180]) -> [PASS][44]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-kbl7/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-kbl6/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-a-coverage-7efc:
- shard-skl: [FAIL][45] ([fdo#108145] / [i915#265]) -> [PASS][46]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-skl5/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-skl6/igt@[email protected]
* igt@kms_psr@psr2_sprite_mmap_gtt:
- shard-iclb: [SKIP][47] ([fdo#109441]) -> [PASS][48] +2 similar issues
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-iclb4/igt@kms_psr@psr2_sprite_mmap_gtt.html
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-iclb2/igt@kms_psr@psr2_sprite_mmap_gtt.html
* {igt@perf@polling-parameterized}:
- shard-tglb: [FAIL][49] ([i915#1542]) -> [PASS][50]
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-tglb6/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-tglb7/igt@[email protected]
* {igt@perf@polling-small-buf}:
- shard-iclb: [FAIL][51] -> [PASS][52]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-iclb3/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-iclb8/igt@[email protected]
* {igt@sysfs_timeslice_duration@timeout@vecs0}:
- shard-apl: [FAIL][53] -> [PASS][54]
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-apl2/igt@sysfs_timeslice_duration@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-apl4/igt@sysfs_timeslice_duration@[email protected]
#### Warnings ####
* igt@gem_workarounds@suspend-resume-context:
- shard-kbl: [INCOMPLETE][55] ([i915#155]) -> [INCOMPLETE][56] ([i915#155] / [i915#180])
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-kbl2/igt@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-kbl7/igt@[email protected]
* igt@i915_pm_rpm@drm-resources-equal:
- shard-snb: [SKIP][57] ([fdo#109271]) -> [INCOMPLETE][58] ([i915#82])
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-snb1/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-snb5/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-c-alpha-7efc:
- shard-apl: [FAIL][59] ([fdo#108145] / [i915#265] / [i915#95]) -> [FAIL][60] ([fdo#108145] / [i915#265])
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8322/shard-apl4/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/shard-apl2/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109349]: https://bugs.freedesktop.org/show_bug.cgi?id=109349
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[i915#1185]: https://gitlab.freedesktop.org/drm/intel/issues/1185
[i915#1531]: https://gitlab.freedesktop.org/drm/intel/issues/1531
[i915#1542]: https://gitlab.freedesktop.org/drm/intel/issues/1542
[i915#155]: https://gitlab.freedesktop.org/drm/intel/issues/155
[i915#1658]: https://gitlab.freedesktop.org/drm/intel/issues/1658
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#250]: https://gitlab.freedesktop.org/drm/intel/issues/250
[i915#265]: https://gitlab.freedesktop.org/drm/intel/issues/265
[i915#300]: https://gitlab.freedesktop.org/drm/intel/issues/300
[i915#31]: https://gitlab.freedesktop.org/drm/intel/issues/31
[i915#34]: https://gitlab.freedesktop.org/drm/intel/issues/34
[i915#52]: https://gitlab.freedesktop.org/drm/intel/issues/52
[i915#54]: https://gitlab.freedesktop.org/drm/intel/issues/54
[i915#668]: https://gitlab.freedesktop.org/drm/intel/issues/668
[i915#69]: https://gitlab.freedesktop.org/drm/intel/issues/69
[i915#716]: https://gitlab.freedesktop.org/drm/intel/issues/716
[i915#79]: https://gitlab.freedesktop.org/drm/intel/issues/79
[i915#82]: https://gitlab.freedesktop.org/drm/intel/issues/82
[i915#93]: https://gitlab.freedesktop.org/drm/intel/issues/93
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
Participating hosts (10 -> 10)
------------------------------
No changes in participating hosts
Build changes
-------------
* CI: CI-20190529 -> None
* Linux: CI_DRM_8322 -> Patchwork_17356
CI-20190529: 20190529
CI_DRM_8322: fd447e6b1ee13e6a9731bddc7694552640e8a01e @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5599: cdb07101dda33e2fcb0f4c2aa199c47159d88f35 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_17356: bdd0a32afab1c4234d6476e1e86ea4c0ef73a2f4 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17356/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx