Skip to contentSkip to conversation

mtd: spi-nor: Add 4B_OPCODES flag to n25q256a

PATCH In review Daniel Walker 2 participants 5 messages Apr 17, 2020 – Apr 21, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mtd: spi-nor: Add 4B_OPCODES flag to n25q256a

The n25q256a supports 4-byte opcodes so lets add the flag. Tested on Cisco IoT platform hardware using Marvell A7040 SoC.

This patch was base on one from Guo Yi <[email protected]>.

---
 drivers/mtd/spi-nor/micron-st.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mtd/spi-nor/micron-st.c +1 -1
index 6c034b9718e2..471fe2bc2ba4 100644
@@ -37,7 +37,7 @@ static const struct flash_info st_parts[] = {
 			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
 	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K |
 			      USE_FSR | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
+			      SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
 	{ "mt25qu256a",  INFO6(0x20bb19, 0x104400, 64 * 1024,  512,
 			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
 			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
Signature · 6 lines
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
#1 lore raw

Hi, Daniel,

Quoted 4 lines · EEST Daniel Walker

EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

The n25q256a supports 4-byte opcodes so lets add the flag.

This is not true for all the n25q256a flashes. SPINOR_OP_PP_4B, SPINOR_OP_BE_4K_4B and SPINOR_OP_SE_4B are valid just for the part numbers N25Q256A83ESF40x, N25Q256A83E1240x, and N25Q256A83ESFA0F.

You need to differentiate between the aforementioned flashes and the rest in the n25q256a, in order to add the 4-byte opcodes flag.

Cheers,
ta

Quoted 25 lines

Tested on Cisco IoT platform hardware using Marvell A7040 SoC.

This patch was base on one from Guo Yi <[email protected]>.

---
 drivers/mtd/spi-nor/micron-st.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
(quoted diff) +0 -0

b/drivers/mtd/spi-nor/micron-st.c index 6c034b9718e2..471fe2bc2ba4 100644

drivers/mtd/spi-nor/micron-st.c +1 -2
@@ -37,7 +37,7 @@ static const struct flash_info st_parts[] = {
                               SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
        { "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K |
                              USE_FSR | SPI_NOR_DUAL_READ |
-                             SPI_NOR_QUAD_READ) },
+                             SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
        { "mt25qu256a",  INFO6(0x20bb19, 0x104400, 64 * 1024,  512,
                               SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
                               SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
--

2.17.1

#2 lore raw
Quoted 6 lines · On Mon, Apr 20, 2020 at 03:45:59PM +0000, [email protected] wrote:

Hi, Daniel,

Quoted 3 lines · EEST Daniel Walker

EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

Quoted 8 lines
Quoted 1 line

The n25q256a supports 4-byte opcodes so lets add the flag.

This is not true for all the n25q256a flashes. SPINOR_OP_PP_4B, SPINOR_OP_BE_4K_4B and SPINOR_OP_SE_4B are valid just for the part numbers N25Q256A83ESF40x, N25Q256A83E1240x, and N25Q256A83ESFA0F.

You need to differentiate between the aforementioned flashes and the rest in the n25q256a, in order to add the 4-byte opcodes flag.

How do you suggest I do that ? Can I add a new entry into this table with more specific information about the chips ?

Daniel
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

#3 lore raw
Quoted 16 lines · EEST Daniel Walker (danielwa)

EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

Quoted 13 lines · On Mon, Apr 20, 2020 at 03:45:59PM +0000, [email protected] wrote:

Hi, Daniel,

Quoted 5 lines · EEST Daniel Walker

EXTERNAL EMAIL: Do not click links or open attachments unless you know the
content is safe

The n25q256a supports 4-byte opcodes so lets add the flag.

This is not true for all the n25q256a flashes. SPINOR_OP_PP_4B, SPINOR_OP_BE_4K_4B and SPINOR_OP_SE_4B are valid just for the part numbers N25Q256A83ESF40x, N25Q256A83E1240x, and N25Q256A83ESFA0F.

Quoted 6 lines
Quoted 2 lines

You need to differentiate between the aforementioned flashes and the rest in the n25q256a, in order to add the 4-byte opcodes flag.

How do you suggest I do that ? Can I add a new entry into this table with more specific information about the chips ?

We need to find a differentiator at runtime. If we are lucky, there might be
some SFDP changes between the 4-byte opcodes capable flashes and the rest.
Please dump all the sfdp tables, we can start from there. There's a thread
that might interest you, see http://u-boot.10912.n7.nabble.com/Regressions-in-MTD-SPI-FLASH-td382956.html#a383126.

A more elegant way to solve it, is by parsing the 4bait sfdp table, but I haven't checked if this flash supports it or not. Anyway, not something that we can control, the manufacturer should add it.

Cheers,
ta

#4 lore raw
Quoted 20 lines · On Tue, Apr 21, 2020 at 04:52:01AM +0000, [email protected] wrote:
Quoted 19 lines · EEST Daniel Walker (danielwa)

EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

Quoted 15 lines · On Mon, Apr 20, 2020 at 03:45:59PM +0000, [email protected] wrote:

Hi, Daniel,

Quoted 5 lines · EEST Daniel Walker

EXTERNAL EMAIL: Do not click links or open attachments unless you know the
content is safe

The n25q256a supports 4-byte opcodes so lets add the flag.

This is not true for all the n25q256a flashes. SPINOR_OP_PP_4B, SPINOR_OP_BE_4K_4B and SPINOR_OP_SE_4B are valid just for the part numbers N25Q256A83ESF40x, N25Q256A83E1240x, and N25Q256A83ESFA0F.

You need to differentiate between the aforementioned flashes and the rest in the n25q256a, in order to add the 4-byte opcodes flag.

Quoted 8 lines
Quoted 3 lines

How do you suggest I do that ? Can I add a new entry into this table with more specific information about the chips ?

We need to find a differentiator at runtime. If we are lucky, there might be
some SFDP changes between the 4-byte opcodes capable flashes and the rest.
Please dump all the sfdp tables, we can start from there. There's a thread
that might interest you, see http://u-boot.10912.n7.nabble.com/Regressions-in-MTD-SPI-FLASH-td382956.html#a383126.

The thread seems to indicate that it's not easy to identify the chips which support this.

Inside our device tree we identify that our flash is compatible with, compatible = "jedec,spi-nor";

Would it make sense to add further identification of the chips into the device tree, or allow some level of control over the SPI_NOR_4B_OPCODES flag into the device tree. Since it would seems identification of the chips is not trivial.

Quoted 3 lines

A more elegant way to solve it, is by parsing the 4bait sfdp table, but I haven't checked if this flash supports it or not. Anyway, not something that we can control, the manufacturer should add it.

We can investigate, our hardware team is claiming the only way to know if physically reading what's on the chip.

Daniel