configs/nenopi_neo4: new updated defconfig
PATCH v4 1/1 configs/nenopi_neo4: new updated defconfig
This patch revert 8af7b11bd8a95bc41e4de46f727f3b0afde465a4 and add extra options to have build working
Updates:
- enable BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN
- bump kernel to 5.4
- increase default rootfs size to 70M
- use mainline u-boot
- added myself as maintainer (original author was removed from DEVELOPERS list)
--- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/friendlyarm/nanopi-neo4/extlinux.conf | 4 +++ board/friendlyarm/nanopi-neo4/genimage.cfg | 22 ++++++++++++ board/friendlyarm/nanopi-neo4/post-build.sh | 5 +++ board/friendlyarm/nanopi-neo4/readme.txt | 53 +++++++++++++++++++++++++++ configs/nanopi_neo4_defconfig | 56 +++++++++++++++++++++++++++++ 7 files changed, 143 insertions(+) create mode 100644 board/friendlyarm/nanopi-neo4/extlinux.conf create mode 100644 board/friendlyarm/nanopi-neo4/genimage.cfg create mode 100755 board/friendlyarm/nanopi-neo4/post-build.sh create mode 100644 board/friendlyarm/nanopi-neo4/readme.txt create mode 100644 configs/nanopi_neo4_defconfig
.gitlab-ci.yml +1 -0
@@ -226,6 +226,7 @@ mx6sx_udoo_neo_defconfig: { extends: .defconfig } mx6udoo_defconfig: { extends: .defconfig } nanopi_m1_defconfig: { extends: .defconfig } nanopi_m1_plus_defconfig: { extends: .defconfig } +nanopi_neo4_defconfig: { extends: .defconfig } nanopi_neo_defconfig: { extends: .defconfig } nanopi_r1_defconfig: { extends: .defconfig } nexbox_a95x_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
@@ -1605,6 +1605,8 @@ F: package/libatasmart/ F: package/polkit/ F: package/sg3_utils/ F: package/udisks/ +F: board/friendlyarm/nanopi-m4/ +F: configs/nanopi_neo4_defconfig N: Mario Lang <[email protected]> F: package/brltty/
board/friendlyarm/nanopi-neo4/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label NanoPi Neo4 linux + kernel /boot/Image + devicetree /boot/rk3399-nanopi-neo4.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait
board/friendlyarm/nanopi-neo4/genimage.cfg new file +22 -0
@@ -0,0 +1,22 @@ +image sdcard.img { + hdimage { + } + + partition u-boot-tpl-spl-dtb { + in-partition-table = "no" + image = "idbloader.img" + offset = 32K + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot.itb" + offset = 8M + size = 30M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/friendlyarm/nanopi-neo4/post-build.sh new file +5 -0
@@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
board/friendlyarm/nanopi-neo4/readme.txt new file +53 -0
53 lines not on this page · raw message
configs/nanopi_neo4_defconfig new file +56 -0
56 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v4 1/1 configs/nenopi_neo4: new updated defconfig
Hello Marek,
I've applied, with some very minor tweaks.
First, typo in the commit title nenopi -> nanopi
Quoted 2 lines · On Tue, 14 Apr 2020 21:03:29 +0200 Marek Belisko…
This patch revert
8af7b11bd8a95bc41e4de46f727f3b0afde465a4and add extra options to have build working
I've improved the wording a bit, because this is not just about reverting a previous patch.
DEVELOPERS F: package/libatasmart/ · line 1609
Quoted 10 lines
DEVELOPERS +2
-0@@ -1605,6 +1605,8 @@ F: package/libatasmart/ F: package/polkit/ F: package/sg3_utils/ F: package/udisks/ +F: board/friendlyarm/nanopi-m4/ +F: configs/nanopi_neo4_defconfig
Alphabetic ordering was not good here.
So I fixed those minor details, and applied. Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH v4 1/1 configs/nenopi_neo4: new updated defconfig
Hi Thomas.
Quoted 4 lines · Thomas Petazzoni
Hello Marek,
I've applied, with some very minor tweaks.
Thanks a lot for fixes and for everything.
Quoted 25 lines
First, typo in the commit title nenopi -> nanopi
Quoted 2 lines · On Tue, 14 Apr 2020 21:03:29 +0200 Marek Belisko…
This patch revert
8af7b11bd8a95bc41e4de46f727f3b0afde465a4and add extra options to have build workingI've improved the wording a bit, because this is not just about reverting a previous patch.
DEVELOPERS F: package/libatasmart/ · line 1609
Quoted 10 lines
DEVELOPERS +2
-0@@ -1605,6 +1605,8 @@ F: package/libatasmart/ F: package/polkit/ F: package/sg3_utils/ F: package/udisks/ +F: board/friendlyarm/nanopi-m4/ +F: configs/nanopi_neo4_defconfigAlphabetic ordering was not good here.
Quoted 7 lines
So I fixed those minor details, and applied. Thanks!
Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
BR,
marek
Signature · 10 lines
as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite twitter: #opennandra web: http://open-nandra.com