Skip to contentSkip to conversation

iio: vcnl: Add interrupts support for VCNL4010/20.

PATCH Superseded Mathieu Othacehe 3 participants 11 messages Apr 20, 2020 – Apr 21, 2020 IIO

v3 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

v3 cover iio: vcnl: Add interrupts support for VCNL4010/20.

Hello,

Here's a v3 that is rebased on top of recent additions to the vcnl4000 driver.

Thanks,

Mathieu

Changes from v2:
* Rebase on iio testing branch.
* Remove useless test in vcnl4010_probe_trigger.

Changes from v1:
* Split into four different patches.
* Use iio_device_claim_direct_mode to protect
raw access from buffer capture.
* Requesting a sampling frequency above the limit is no longer possible.
* Inline read_isr and write_isr functions.
* Remove IIO_LIGHT data from buffer capture.
* Make sure postenable and predisable functions respect the common form.
* Do not set the trigger by default.
* Remove the devm_iio_triggered_buffer_setup top half.

Mathieu Othacehe (4):
iio: vcnl4000: Factorize data reading and writing.
iio: vcnl4000: Add event support for VCNL4010/20.
iio: vcnl4000: Add sampling frequency support for VCNL4010/20.
iio: vcnl4000: Add buffer support for VCNL4010/20.

 drivers/iio/light/Kconfig    |   2 +
 drivers/iio/light/vcnl4000.c | 890 ++++++++++++++++++++++++++++++++---
 2 files changed, 828 insertions(+), 64 deletions(-)
Signature · 1 line
2.26.0
#1 lore raw

PATCH v3 1/4 iio: vcnl4000: Factorize data reading and writing.

Factorize data reading in vcnl4000_measure into a vcnl4000_read_block_data function. Use it to provide a vcnl4000_read_data function that is able to read sensor data under lock. Also add a vcnl4000_write_data function.

---
 drivers/iio/light/vcnl4000.c | 54 +++++++++++++++++++++++++++++++++---
 1 file changed, 50 insertions(+), 4 deletions(-)
drivers/iio/light/vcnl4000.c +50 -4
index 58e97462e803..4e87d2cf1100 100644
@@ -215,11 +215,59 @@ static int vcnl4200_init(struct vcnl4000_data *data)
 	return 0;
 };
 
+static int vcnl4000_read_block_data(struct vcnl4000_data *data, u8 data_reg,
+				    int *val)
+{
+	__be16 buf;
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(data->client,
+		data_reg, sizeof(buf), (u8 *) &buf);
+	if (ret < 0)
+		goto end;
+
+	*val = be16_to_cpu(buf);
+end:
+	return ret;
+}
+
+static int vcnl4000_read_data(struct vcnl4000_data *data, u8 data_reg,
+			      int *val)
+{
+	int ret;
+
+	mutex_lock(&data->vcnl4000_lock);
+	ret = vcnl4000_read_block_data(data, data_reg, val);
+	mutex_unlock(&data->vcnl4000_lock);
+
+	return ret;
+}
+
+static int vcnl4000_write_data(struct vcnl4000_data *data, u8 data_reg,
+			       u16 val)
+{
+	int ret;
+
+	if (val > U16_MAX)
+		return -ERANGE;
+
+	mutex_lock(&data->vcnl4000_lock);
+
+	ret = i2c_smbus_write_byte_data(data->client, data_reg, val >> 8);
+	if (ret < 0)
+		goto end;
+
+	ret = i2c_smbus_write_byte_data(data->client, data_reg + 1, val);
+end:
+	mutex_unlock(&data->vcnl4000_lock);
+
+	return ret;
+}
+
 static int vcnl4000_measure(struct vcnl4000_data *data, u8 req_mask,
 				u8 rdy_mask, u8 data_reg, int *val)
 {
 	int tries = 20;
-	__be16 buf;
 	int ret;
 
 	mutex_lock(&data->vcnl4000_lock);
@@ -246,13 +294,11 @@ static int vcnl4000_measure(struct vcnl4000_data *data, u8 req_mask,
 		goto fail;
 	}
 
-	ret = i2c_smbus_read_i2c_block_data(data->client,
-		data_reg, sizeof(buf), (u8 *) &buf);
+	ret = vcnl4000_read_block_data(data, data_reg, val);
 	if (ret < 0)
 		goto fail;
 
 	mutex_unlock(&data->vcnl4000_lock);
-	*val = be16_to_cpu(buf);
 
 	return 0;
 
Signature · 1 line
2.26.0
#2 lore raw

Re: [PATCH v3 1/4] iio: vcnl4000: Factorize data reading and writing.

Quoted 3 lines · Mathieu Othacehe

Factorize data reading in vcnl4000_measure into a vcnl4000_read_block_data function. Use it to provide a vcnl4000_read_data function that is able to read sensor data under lock. Also add a vcnl4000_write_data function.

comments below

Quoted 42 lines
---
 drivers/iio/light/vcnl4000.c | 54 +++++++++++++++++++++++++++++++++---
 1 file changed, 50 insertions(+), 4 deletions(-)
drivers/iio/light/vcnl4000.c +29 -0
index 58e97462e803..4e87d2cf1100 100644
@@ -215,11 +215,59 @@ static int vcnl4200_init(struct vcnl4000_data *data)
 	return 0;
 };
 
+static int vcnl4000_read_block_data(struct vcnl4000_data *data, u8 data_reg,
+				    int *val)
+{
+	__be16 buf;
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(data->client,
+		data_reg, sizeof(buf), (u8 *) &buf);
+	if (ret < 0)
+		goto end;
+
+	*val = be16_to_cpu(buf);
+end:
+	return ret;
+}
+
+static int vcnl4000_read_data(struct vcnl4000_data *data, u8 data_reg,
+			      int *val)
+{
+	int ret;
+
+	mutex_lock(&data->vcnl4000_lock);
+	ret = vcnl4000_read_block_data(data, data_reg, val);
+	mutex_unlock(&data->vcnl4000_lock);
+
+	return ret;
+}
+
+static int vcnl4000_write_data(struct vcnl4000_data *data, u8 data_reg,

drivers/iio/light/vcnl4000.c static int vcnl4200_init(struct vcnl4000_data *data) · line 256

Quoted 10 lines
drivers/iio/light/vcnl4000.c +10 -0
+			       u16 val)
+{
+	int ret;
+
+	if (val > U16_MAX)
+		return -ERANGE;
+
+	mutex_lock(&data->vcnl4000_lock);
+
+	ret = i2c_smbus_write_byte_data(data->client, data_reg, val >> 8);

why not use i2c_smbus_write_word_data()?

Quoted 34 lines
drivers/iio/light/vcnl4000.c +11 -4
+	if (ret < 0)
+		goto end;
+
+	ret = i2c_smbus_write_byte_data(data->client, data_reg + 1, val);
+end:
+	mutex_unlock(&data->vcnl4000_lock);
+
+	return ret;
+}
+
 static int vcnl4000_measure(struct vcnl4000_data *data, u8 req_mask,
 				u8 rdy_mask, u8 data_reg, int *val)
 {
 	int tries = 20;
-	__be16 buf;
 	int ret;
 
 	mutex_lock(&data->vcnl4000_lock);
@@ -246,13 +294,11 @@ static int vcnl4000_measure(struct vcnl4000_data *data, u8 req_mask,
 		goto fail;
 	}
 
-	ret = i2c_smbus_read_i2c_block_data(data->client,
-		data_reg, sizeof(buf), (u8 *) &buf);
+	ret = vcnl4000_read_block_data(data, data_reg, val);
 	if (ret < 0)
 		goto fail;
 
 	mutex_unlock(&data->vcnl4000_lock);
-	*val = be16_to_cpu(buf);
 
 	return 0;
 
Signature · 2 lines
Peter Meerwald-Stadler
Mobile: +43 664 24 44 418
#3 lore raw

Re: [PATCH v3 1/4] iio: vcnl4000: Factorize data reading and writing.

In reply to Mathieu Othacehe
Quoted 4 lines · Mathieu Othacehe

Factorize data reading in vcnl4000_measure into a vcnl4000_read_block_data function. Use it to provide a vcnl4000_read_data function that is able to read sensor data under lock. Also add a vcnl4000_write_data function.

...

drivers/iio/light/vcnl4000.c static int vcnl4200_init(struct vcnl4000_data *data)

Quoted 6 lines
drivers/iio/light/vcnl4000.c +5 -0
+       __be16 buf;
+       int ret;
+
+       ret = i2c_smbus_read_i2c_block_data(data->client,
 
+               data_reg, sizeof(buf), (u8 *) &buf);

Why do you need casting?

Quoted 2 lines
(quoted diff) +2 -0
+       if (ret < 0)
+               goto end;
Signature · 2 lines
With Best Regards,
Andy Shevchenko
#4 lore raw

PATCH v3 2/4 iio: vcnl4000: Add event support for VCNL4010/20.

In reply to Mathieu Othacehe

The VCNL4010 and VCNL4020 chips are able to raise interrupts on proximity threshold events. Add support for threshold rising and falling events for those two chips.

---
 drivers/iio/light/vcnl4000.c | 478 ++++++++++++++++++++++++++++++-----
 1 file changed, 418 insertions(+), 60 deletions(-)
drivers/iio/light/vcnl4000.c +418 -60
index 4e87d2cf1100..73a3627d12b8 100644
@@ -23,7 +23,9 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/pm_runtime.h>
+#include <linux/interrupt.h>
 
+#include <linux/iio/events.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 
@@ -44,6 +46,15 @@
 #define VCNL4000_PS_MEAS_FREQ	0x89 /* Proximity test signal frequency */
 #define VCNL4000_PS_MOD_ADJ	0x8a /* Proximity modulator timing adjustment */
 
+#define VCNL4010_PROX_RATE      0x82 /* Proximity rate */
+#define VCNL4010_ALS_PARAM      0x84 /* ALS rate */
+#define VCNL4010_INT_CTRL	0x89 /* Interrupt control */
+#define VCNL4010_LOW_THR_HI     0x8a /* Low threshold, MSB */
+#define VCNL4010_LOW_THR_LO     0x8b /* Low threshold, LSB */
+#define VCNL4010_HIGH_THR_HI    0x8c /* High threshold, MSB */
+#define VCNL4010_HIGH_THR_LO    0x8d /* High threshold, LSB */
+#define VCNL4010_ISR		0x8e /* Interrupt status */
+
 #define VCNL4200_AL_CONF	0x00 /* Ambient light configuration */
 #define VCNL4200_PS_CONF1	0x03 /* Proximity configuration */
 #define VCNL4200_PS_DATA	0x08 /* Proximity data */
@@ -57,6 +68,26 @@
 #define VCNL4000_PS_RDY		BIT(5) /* proximity data ready? */
 #define VCNL4000_AL_OD		BIT(4) /* start on-demand ALS measurement */
 #define VCNL4000_PS_OD		BIT(3) /* start on-demand proximity measurement */
+#define VCNL4000_ALS_EN		BIT(2) /* start ALS measurement */
+#define VCNL4000_PROX_EN	BIT(1) /* start proximity measurement */
+#define VCNL4000_SELF_TIMED_EN	BIT(0) /* start self-timed measurement */
+
+/* Bit masks for interrupt registers. */
+#define VCNL4010_INT_THR_SEL	BIT(0) /* Select threshold interrupt source */
+#define VCNL4010_INT_THR_EN	BIT(1) /* Threshold interrupt type */
+#define VCNL4010_INT_ALS_EN	BIT(2) /* Enable on ALS data ready */
+#define VCNL4010_INT_PROX_EN	BIT(3) /* Enable on proximity data ready */
+
+#define VCNL4010_INT_THR_HIGH	0 /* High threshold exceeded */
+#define VCNL4010_INT_THR_LOW	1 /* Low threshold exceeded */
+#define VCNL4010_INT_ALS	2 /* ALS data ready */
+#define VCNL4010_INT_PROXIMITY	3 /* Proximity data ready */
+
+#define VCNL4010_INT_THR \
+	(BIT(VCNL4010_INT_THR_LOW) | BIT(VCNL4010_INT_THR_HIGH))
+#define VCNL4010_INT_DRDY \
+	(BIT(VCNL4010_INT_PROXIMITY) | BIT(VCNL4010_INT_ALS))
+
 
 #define VCNL4000_SLEEP_DELAY_MS	2000 /* before we enter pm_runtime_suspend */
 
@@ -88,6 +119,10 @@ struct vcnl4000_data {
 
 struct vcnl4000_chip_spec {
 	const char *prod;
+	struct iio_chan_spec const *channels;
+	const int num_channels;
+	const struct iio_info *info;
+	bool irq_support;
 	int (*init)(struct vcnl4000_data *data);
 	int (*measure_light)(struct vcnl4000_data *data, int *val);
 	int (*measure_proximity)(struct vcnl4000_data *data, int *val);
@@ -358,67 +393,23 @@ static int vcnl4200_measure_proximity(struct vcnl4000_data *data, int *val)
 	return vcnl4200_measure(data, &data->vcnl4200_ps, val);
 }
 
-static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
-	[VCNL4000] = {
-		.prod = "VCNL4000",
-		.init = vcnl4000_init,
-		.measure_light = vcnl4000_measure_light,
-		.measure_proximity = vcnl4000_measure_proximity,
-		.set_power_state = vcnl4000_set_power_state,
-	},
-	[VCNL4010] = {
-		.prod = "VCNL4010/4020",
-		.init = vcnl4000_init,
-		.measure_light = vcnl4000_measure_light,
-		.measure_proximity = vcnl4000_measure_proximity,
-		.set_power_state = vcnl4000_set_power_state,
-	},
-	[VCNL4040] = {
-		.prod = "VCNL4040",
-		.init = vcnl4200_init,
-		.measure_light = vcnl4200_measure_light,
-		.measure_proximity = vcnl4200_measure_proximity,
-		.set_power_state = vcnl4200_set_power_state,
-	},
-	[VCNL4200] = {
-		.prod = "VCNL4200",
-		.init = vcnl4200_init,
-		.measure_light = vcnl4200_measure_light,
-		.measure_proximity = vcnl4200_measure_proximity,
-		.set_power_state = vcnl4200_set_power_state,
-	},
-};
-
-static ssize_t vcnl4000_read_near_level(struct iio_dev *indio_dev,
-					uintptr_t priv,
-					const struct iio_chan_spec *chan,
-					char *buf)
+static int vcnl4010_in_periodic_mode(struct vcnl4000_data *data)
 {
-	struct vcnl4000_data *data = iio_priv(indio_dev);
+	int ret;
 
-	return sprintf(buf, "%u\n", data->near_level);
-}
+	mutex_lock(&data->vcnl4000_lock);
 
-static const struct iio_chan_spec_ext_info vcnl4000_ext_info[] = {
-	{
-		.name = "nearlevel",
-		.shared = IIO_SEPARATE,
-		.read = vcnl4000_read_near_level,
-	},
-	{ /* sentinel */ }
-};
+	ret = i2c_smbus_read_byte_data(data->client, VCNL4000_COMMAND);
+	if (ret < 0)
+		goto end;
 
-static const struct iio_chan_spec vcnl4000_channels[] = {
-	{
-		.type = IIO_LIGHT,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
-			BIT(IIO_CHAN_INFO_SCALE),
-	}, {
-		.type = IIO_PROXIMITY,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
-		.ext_info = vcnl4000_ext_info,
-	}
-};
+	ret = (ret & VCNL4000_SELF_TIMED_EN) > 0;
+
+end:
+	mutex_unlock(&data->vcnl4000_lock);
+
+	return ret;
+}
 
 static int vcnl4000_set_pm_runtime_state(struct vcnl4000_data *data, bool on)
 {
@@ -478,10 +469,364 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,
 	}
 }
 
+static int vcnl4010_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	int ret;
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_SCALE:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		/* Protect against event capture. */
+		if (vcnl4010_in_periodic_mode(data)) {
+			ret = -EBUSY;
+		} else {
+			ret = vcnl4000_read_raw(indio_dev, chan, val, val2,
+						mask);
+		}
+
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int vcnl4010_read_event(struct iio_dev *indio_dev,
+			       const struct iio_chan_spec *chan,
+			       enum iio_event_type type,
+			       enum iio_event_direction dir,
+			       enum iio_event_info info,
+			       int *val, int *val2)
+{
+	int ret;
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			ret = vcnl4000_read_data(data, VCNL4010_HIGH_THR_HI,
+						 val);
+			if (ret < 0)
+				return ret;
+			return IIO_VAL_INT;
+		case IIO_EV_DIR_FALLING:
+			ret = vcnl4000_read_data(data, VCNL4010_LOW_THR_HI,
+						 val);
+			if (ret < 0)
+				return ret;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int vcnl4010_write_event(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir,
+				enum iio_event_info info,
+				int val, int val2)
+{
+	int ret;
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			ret = vcnl4000_write_data(data, VCNL4010_HIGH_THR_HI,
+						  val);
+			if (ret < 0)
+				return ret;
+			return IIO_VAL_INT;
+		case IIO_EV_DIR_FALLING:
+			ret = vcnl4000_write_data(data, VCNL4010_LOW_THR_HI,
+						  val);
+			if (ret < 0)
+				return ret;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int vcnl4010_thr_enabled(struct vcnl4000_data *data)
+{
+	int ret;
+
+	mutex_lock(&data->vcnl4000_lock);
+
+	ret = i2c_smbus_read_byte_data(data->client, VCNL4010_INT_CTRL);
+	if (ret < 0)
+		goto end;
+
+	ret = (ret & VCNL4010_INT_THR_EN) > 0;
+
+end:
+	mutex_unlock(&data->vcnl4000_lock);
+
+	return ret;
+}
+
+static int vcnl4010_read_event_config(struct iio_dev *indio_dev,
+				      const struct iio_chan_spec *chan,
+				      enum iio_event_type type,
+				      enum iio_event_direction dir)
+{
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		return vcnl4010_thr_enabled(data);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int vcnl4010_prox_threshold(struct iio_dev *indio_dev, int state)
+{
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+	int ret;
+	int icr;
+	int command;
+
+	if (state) {
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		/* Enable periodic measurement of proximity data. */
+		command = VCNL4000_SELF_TIMED_EN | VCNL4000_PROX_EN;
+
+		/*
+		 * Enable interrupts on threshold, for proximity data by
+		 * default.
+		 */
+		icr = VCNL4010_INT_THR_EN;
+	} else {
+		if (!vcnl4010_thr_enabled(data))
+			return 0;
+
+		command = 0;
+		icr = 0;
+	}
+
+	mutex_lock(&data->vcnl4000_lock);
+
+	ret = i2c_smbus_write_byte_data(data->client, VCNL4000_COMMAND,
+					command);
+	if (ret < 0)
+		goto end;
+
+	ret = i2c_smbus_write_byte_data(data->client, VCNL4010_INT_CTRL, icr);
+
+end:
+	mutex_unlock(&data->vcnl4000_lock);
+
+	if (state)
+		iio_device_release_direct_mode(indio_dev);
+
+	return ret;
+}
+
+static int vcnl4010_write_event_config(struct iio_dev *indio_dev,
+				       const struct iio_chan_spec *chan,
+				       enum iio_event_type type,
+				       enum iio_event_direction dir,
+				       int state)
+{
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		return vcnl4010_prox_threshold(indio_dev, state);
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static ssize_t vcnl4000_read_near_level(struct iio_dev *indio_dev,
+					uintptr_t priv,
+					const struct iio_chan_spec *chan,
+					char *buf)
+{
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+
+	return sprintf(buf, "%u\n", data->near_level);
+}
+
+static const struct iio_chan_spec_ext_info vcnl4000_ext_info[] = {
+	{
+		.name = "nearlevel",
+		.shared = IIO_SEPARATE,
+		.read = vcnl4000_read_near_level,
+	},
+	{ /* sentinel */ }
+};
+
+static const struct iio_event_spec vcnl4000_event_spec[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	}
+};
+
+static const struct iio_chan_spec vcnl4000_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE),
+	}, {
+		.type = IIO_PROXIMITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.ext_info = vcnl4000_ext_info,
+	}
+};
+
+static const struct iio_chan_spec vcnl4010_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.scan_index = -1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE),
+	}, {
+		.type = IIO_PROXIMITY,
+		.scan_index = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.event_spec = vcnl4000_event_spec,
+		.num_event_specs = ARRAY_SIZE(vcnl4000_event_spec),
+		.ext_info = vcnl4000_ext_info,
+	},
+};
+
 static const struct iio_info vcnl4000_info = {
 	.read_raw = vcnl4000_read_raw,
 };
 
+static const struct iio_info vcnl4010_info = {
+	.read_raw = vcnl4010_read_raw,
+	.read_event_value = vcnl4010_read_event,
+	.write_event_value = vcnl4010_write_event,
+	.read_event_config = vcnl4010_read_event_config,
+	.write_event_config = vcnl4010_write_event_config,
+};
+
+static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
+	[VCNL4000] = {
+		.prod = "VCNL4000",
+		.init = vcnl4000_init,
+		.measure_light = vcnl4000_measure_light,
+		.measure_proximity = vcnl4000_measure_proximity,
+		.set_power_state = vcnl4000_set_power_state,
+		.channels = vcnl4000_channels,
+		.num_channels = ARRAY_SIZE(vcnl4000_channels),
+		.info = &vcnl4000_info,
+		.irq_support = false,
+	},
+	[VCNL4010] = {
+		.prod = "VCNL4010/4020",
+		.init = vcnl4000_init,
+		.measure_light = vcnl4000_measure_light,
+		.measure_proximity = vcnl4000_measure_proximity,
+		.set_power_state = vcnl4000_set_power_state,
+		.channels = vcnl4010_channels,
+		.num_channels = ARRAY_SIZE(vcnl4010_channels),
+		.info = &vcnl4010_info,
+		.irq_support = true,
+	},
+	[VCNL4040] = {
+		.prod = "VCNL4040",
+		.init = vcnl4200_init,
+		.measure_light = vcnl4200_measure_light,
+		.measure_proximity = vcnl4200_measure_proximity,
+		.set_power_state = vcnl4200_set_power_state,
+		.channels = vcnl4000_channels,
+		.num_channels = ARRAY_SIZE(vcnl4000_channels),
+		.info = &vcnl4000_info,
+		.irq_support = false,
+	},
+	[VCNL4200] = {
+		.prod = "VCNL4200",
+		.init = vcnl4200_init,
+		.measure_light = vcnl4200_measure_light,
+		.measure_proximity = vcnl4200_measure_proximity,
+		.set_power_state = vcnl4200_set_power_state,
+		.channels = vcnl4000_channels,
+		.num_channels = ARRAY_SIZE(vcnl4000_channels),
+		.info = &vcnl4000_info,
+		.irq_support = false,
+	},
+};
+
+static irqreturn_t vcnl4010_irq_thread(int irq, void *p)
+{
+	struct iio_dev *indio_dev = p;
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+	unsigned long isr;
+	int ret;
+
+	mutex_lock(&data->vcnl4000_lock);
+	ret = i2c_smbus_read_byte_data(data->client, VCNL4010_ISR);
+	mutex_unlock(&data->vcnl4000_lock);
+
+	if (ret < 0)
+		goto end;
+
+	isr = ret;
+
+	if (isr & VCNL4010_INT_THR) {
+		if (test_bit(VCNL4010_INT_THR_LOW, &isr)) {
+			iio_push_event(indio_dev,
+				       IIO_UNMOD_EVENT_CODE(
+					       IIO_PROXIMITY,
+					       1,
+					       IIO_EV_TYPE_THRESH,
+					       IIO_EV_DIR_FALLING),
+				       iio_get_time_ns(indio_dev));
+		}
+
+		if (test_bit(VCNL4010_INT_THR_HIGH, &isr)) {
+			iio_push_event(indio_dev,
+				       IIO_UNMOD_EVENT_CODE(
+					       IIO_PROXIMITY,
+					       1,
+					       IIO_EV_TYPE_THRESH,
+					       IIO_EV_DIR_RISING),
+				       iio_get_time_ns(indio_dev));
+		}
+
+		mutex_lock(&data->vcnl4000_lock);
+		i2c_smbus_write_byte_data(data->client, VCNL4010_ISR,
+					  isr & VCNL4010_INT_THR);
+		mutex_unlock(&data->vcnl4000_lock);
+	}
+
+end:
+	return IRQ_HANDLED;
+}
+
 static int vcnl4000_probe(struct i2c_client *client,
 			  const struct i2c_device_id *id)
 {
@@ -511,12 +856,25 @@ static int vcnl4000_probe(struct i2c_client *client,
 		data->near_level = 0;
 
 	indio_dev->dev.parent = &client->dev;
-	indio_dev->info = &vcnl4000_info;
-	indio_dev->channels = vcnl4000_channels;
-	indio_dev->num_channels = ARRAY_SIZE(vcnl4000_channels);
+	indio_dev->info = data->chip_spec->info;
+	indio_dev->channels = data->chip_spec->channels;
+	indio_dev->num_channels = data->chip_spec->num_channels;
 	indio_dev->name = VCNL4000_DRV_NAME;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
+	if (client->irq && data->chip_spec->irq_support) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL, vcnl4010_irq_thread,
+						IRQF_TRIGGER_FALLING |
+						IRQF_ONESHOT,
+						"vncl4010_irq",
+						indio_dev);
+		if (ret < 0) {
+			dev_err(&client->dev, "irq request failed\n");
+			return ret;
+		}
+	}
+
 	ret = pm_runtime_set_active(&client->dev);
 	if (ret < 0)
 		goto fail_poweroff;
Signature · 1 line
2.26.0
#5 lore raw

Re: [PATCH v3 2/4] iio: vcnl4000: Add event support for VCNL4010/20.

Quoted 3 lines · Mathieu Othacehe

The VCNL4010 and VCNL4020 chips are able to raise interrupts on proximity threshold events. Add support for threshold rising and falling events for those two chips.

comments below

the patch should update the TODOs at the top of the file

Quoted 21 lines
---
 drivers/iio/light/vcnl4000.c | 478 ++++++++++++++++++++++++++++++-----
 1 file changed, 418 insertions(+), 60 deletions(-)
drivers/iio/light/vcnl4000.c +2 -0
index 4e87d2cf1100..73a3627d12b8 100644
@@ -23,7 +23,9 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/pm_runtime.h>
+#include <linux/interrupt.h>
 
+#include <linux/iio/events.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 
@@ -44,6 +46,15 @@
 #define VCNL4000_PS_MEAS_FREQ	0x89 /* Proximity test signal frequency */

drivers/iio/light/vcnl4000.c line 56

Quoted 10 lines
drivers/iio/light/vcnl4000.c +8 -0
 #define VCNL4000_PS_MOD_ADJ	0x8a /* Proximity modulator timing adjustment */
 
+#define VCNL4010_PROX_RATE      0x82 /* Proximity rate */
+#define VCNL4010_ALS_PARAM      0x84 /* ALS rate */
+#define VCNL4010_INT_CTRL	0x89 /* Interrupt control */
+#define VCNL4010_LOW_THR_HI     0x8a /* Low threshold, MSB */
+#define VCNL4010_LOW_THR_LO     0x8b /* Low threshold, LSB */
+#define VCNL4010_HIGH_THR_HI    0x8c /* High threshold, MSB */
+#define VCNL4010_HIGH_THR_LO    0x8d /* High threshold, LSB */
+#define VCNL4010_ISR		0x8e /* Interrupt status */

I'd rather have all command registers in ascending order (in one block)

Quoted 217 lines
drivers/iio/light/vcnl4000.c +128 -57
+
 #define VCNL4200_AL_CONF	0x00 /* Ambient light configuration */
 #define VCNL4200_PS_CONF1	0x03 /* Proximity configuration */
 #define VCNL4200_PS_DATA	0x08 /* Proximity data */
@@ -57,6 +68,26 @@
 #define VCNL4000_PS_RDY		BIT(5) /* proximity data ready? */
 #define VCNL4000_AL_OD		BIT(4) /* start on-demand ALS measurement */
 #define VCNL4000_PS_OD		BIT(3) /* start on-demand proximity measurement */
+#define VCNL4000_ALS_EN		BIT(2) /* start ALS measurement */
+#define VCNL4000_PROX_EN	BIT(1) /* start proximity measurement */
+#define VCNL4000_SELF_TIMED_EN	BIT(0) /* start self-timed measurement */
+
+/* Bit masks for interrupt registers. */
+#define VCNL4010_INT_THR_SEL	BIT(0) /* Select threshold interrupt source */
+#define VCNL4010_INT_THR_EN	BIT(1) /* Threshold interrupt type */
+#define VCNL4010_INT_ALS_EN	BIT(2) /* Enable on ALS data ready */
+#define VCNL4010_INT_PROX_EN	BIT(3) /* Enable on proximity data ready */
+
+#define VCNL4010_INT_THR_HIGH	0 /* High threshold exceeded */
+#define VCNL4010_INT_THR_LOW	1 /* Low threshold exceeded */
+#define VCNL4010_INT_ALS	2 /* ALS data ready */
+#define VCNL4010_INT_PROXIMITY	3 /* Proximity data ready */
+
+#define VCNL4010_INT_THR \
+	(BIT(VCNL4010_INT_THR_LOW) | BIT(VCNL4010_INT_THR_HIGH))
+#define VCNL4010_INT_DRDY \
+	(BIT(VCNL4010_INT_PROXIMITY) | BIT(VCNL4010_INT_ALS))
+
 
 #define VCNL4000_SLEEP_DELAY_MS	2000 /* before we enter pm_runtime_suspend */
 
@@ -88,6 +119,10 @@ struct vcnl4000_data {
 
 struct vcnl4000_chip_spec {
 	const char *prod;
+	struct iio_chan_spec const *channels;
+	const int num_channels;
+	const struct iio_info *info;
+	bool irq_support;
 	int (*init)(struct vcnl4000_data *data);
 	int (*measure_light)(struct vcnl4000_data *data, int *val);
 	int (*measure_proximity)(struct vcnl4000_data *data, int *val);
@@ -358,67 +393,23 @@ static int vcnl4200_measure_proximity(struct vcnl4000_data *data, int *val)
 	return vcnl4200_measure(data, &data->vcnl4200_ps, val);
 }
 
-static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
-	[VCNL4000] = {
-		.prod = "VCNL4000",
-		.init = vcnl4000_init,
-		.measure_light = vcnl4000_measure_light,
-		.measure_proximity = vcnl4000_measure_proximity,
-		.set_power_state = vcnl4000_set_power_state,
-	},
-	[VCNL4010] = {
-		.prod = "VCNL4010/4020",
-		.init = vcnl4000_init,
-		.measure_light = vcnl4000_measure_light,
-		.measure_proximity = vcnl4000_measure_proximity,
-		.set_power_state = vcnl4000_set_power_state,
-	},
-	[VCNL4040] = {
-		.prod = "VCNL4040",
-		.init = vcnl4200_init,
-		.measure_light = vcnl4200_measure_light,
-		.measure_proximity = vcnl4200_measure_proximity,
-		.set_power_state = vcnl4200_set_power_state,
-	},
-	[VCNL4200] = {
-		.prod = "VCNL4200",
-		.init = vcnl4200_init,
-		.measure_light = vcnl4200_measure_light,
-		.measure_proximity = vcnl4200_measure_proximity,
-		.set_power_state = vcnl4200_set_power_state,
-	},
-};
-
-static ssize_t vcnl4000_read_near_level(struct iio_dev *indio_dev,
-					uintptr_t priv,
-					const struct iio_chan_spec *chan,
-					char *buf)
+static int vcnl4010_in_periodic_mode(struct vcnl4000_data *data)
 {
-	struct vcnl4000_data *data = iio_priv(indio_dev);
+	int ret;
 
-	return sprintf(buf, "%u\n", data->near_level);
-}
+	mutex_lock(&data->vcnl4000_lock);
 
-static const struct iio_chan_spec_ext_info vcnl4000_ext_info[] = {
-	{
-		.name = "nearlevel",
-		.shared = IIO_SEPARATE,
-		.read = vcnl4000_read_near_level,
-	},
-	{ /* sentinel */ }
-};
+	ret = i2c_smbus_read_byte_data(data->client, VCNL4000_COMMAND);
+	if (ret < 0)
+		goto end;
 
-static const struct iio_chan_spec vcnl4000_channels[] = {
-	{
-		.type = IIO_LIGHT,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
-			BIT(IIO_CHAN_INFO_SCALE),
-	}, {
-		.type = IIO_PROXIMITY,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
-		.ext_info = vcnl4000_ext_info,
-	}
-};
+	ret = (ret & VCNL4000_SELF_TIMED_EN) > 0;
+
+end:
+	mutex_unlock(&data->vcnl4000_lock);
+
+	return ret;
+}
 
 static int vcnl4000_set_pm_runtime_state(struct vcnl4000_data *data, bool on)
 {
@@ -478,10 +469,364 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,
 	}
 }
 
+static int vcnl4010_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	int ret;
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_SCALE:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		/* Protect against event capture. */
+		if (vcnl4010_in_periodic_mode(data)) {
+			ret = -EBUSY;
+		} else {
+			ret = vcnl4000_read_raw(indio_dev, chan, val, val2,
+						mask);
+		}
+
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int vcnl4010_read_event(struct iio_dev *indio_dev,
+			       const struct iio_chan_spec *chan,
+			       enum iio_event_type type,
+			       enum iio_event_direction dir,
+			       enum iio_event_info info,
+			       int *val, int *val2)
+{
+	int ret;
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			ret = vcnl4000_read_data(data, VCNL4010_HIGH_THR_HI,
+						 val);
+			if (ret < 0)
+				return ret;
+			return IIO_VAL_INT;
+		case IIO_EV_DIR_FALLING:
+			ret = vcnl4000_read_data(data, VCNL4010_LOW_THR_HI,
+						 val);
+			if (ret < 0)
+				return ret;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int vcnl4010_write_event(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir,
+				enum iio_event_info info,
+				int val, int val2)
+{
+	int ret;
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			ret = vcnl4000_write_data(data, VCNL4010_HIGH_THR_HI,
+						  val);
+			if (ret < 0)
+				return ret;
+			return IIO_VAL_INT;
+		case IIO_EV_DIR_FALLING:
+			ret = vcnl4000_write_data(data, VCNL4010_LOW_THR_HI,
+						  val);
+			if (ret < 0)
+				return ret;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}

drivers/iio/light/vcnl4000.c static int vcnl4000_read_raw(struct iio_dev *indio_dev, · line 571

Quoted 10 lines
drivers/iio/light/vcnl4000.c +10 -0
+	default:
+		return -EINVAL;
+	}
+}
+
+static int vcnl4010_thr_enabled(struct vcnl4000_data *data)
+{
+	int ret;
+
+	mutex_lock(&data->vcnl4000_lock);

what is the mutex protecting?

Quoted 19 lines
drivers/iio/light/vcnl4000.c +19 -0
+
+	ret = i2c_smbus_read_byte_data(data->client, VCNL4010_INT_CTRL);
+	if (ret < 0)
+		goto end;
+
+	ret = (ret & VCNL4010_INT_THR_EN) > 0;
+
+end:
+	mutex_unlock(&data->vcnl4000_lock);
+
+	return ret;
+}
+
+static int vcnl4010_read_event_config(struct iio_dev *indio_dev,
+				      const struct iio_chan_spec *chan,
+				      enum iio_event_type type,
+				      enum iio_event_direction dir)
+{
+	struct vcnl4000_data *data = iio_priv(indio_dev);

drivers/iio/light/vcnl4000.c static int vcnl4000_read_raw(struct iio_dev *indio_dev, · line 600

Quoted 10 lines
drivers/iio/light/vcnl4000.c +10 -0
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		return vcnl4010_thr_enabled(data);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int vcnl4010_prox_threshold(struct iio_dev *indio_dev, int state)

state could be bool?
maybe a more descriptive name?

Quoted 48 lines
drivers/iio/light/vcnl4000.c +48 -0
+{
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+	int ret;
+	int icr;
+	int command;
+
+	if (state) {
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		/* Enable periodic measurement of proximity data. */
+		command = VCNL4000_SELF_TIMED_EN | VCNL4000_PROX_EN;
+
+		/*
+		 * Enable interrupts on threshold, for proximity data by
+		 * default.
+		 */
+		icr = VCNL4010_INT_THR_EN;
+	} else {
+		if (!vcnl4010_thr_enabled(data))
+			return 0;
+
+		command = 0;
+		icr = 0;
+	}
+
+	mutex_lock(&data->vcnl4000_lock);
+
+	ret = i2c_smbus_write_byte_data(data->client, VCNL4000_COMMAND,
+					command);
+	if (ret < 0)
+		goto end;
+
+	ret = i2c_smbus_write_byte_data(data->client, VCNL4010_INT_CTRL, icr);
+
+end:
+	mutex_unlock(&data->vcnl4000_lock);
+
+	if (state)
+		iio_device_release_direct_mode(indio_dev);
+
+	return ret;
+}
+
+static int vcnl4010_write_event_config(struct iio_dev *indio_dev,
+				       const struct iio_chan_spec *chan,
+				       enum iio_event_type type,

drivers/iio/light/vcnl4000.c static int vcnl4000_read_raw(struct iio_dev *indio_dev, · line 658

Quoted 10 lines
drivers/iio/light/vcnl4000.c +10 -0
+				       enum iio_event_direction dir,
+				       int state)
+{
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		return vcnl4010_prox_threshold(indio_dev, state);
+	default:
+		return -EINVAL;
+	}
+	return 0;

dead code

Quoted 122 lines
drivers/iio/light/vcnl4000.c +118 -0
+}
+
+static ssize_t vcnl4000_read_near_level(struct iio_dev *indio_dev,
+					uintptr_t priv,
+					const struct iio_chan_spec *chan,
+					char *buf)
+{
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+
+	return sprintf(buf, "%u\n", data->near_level);
+}
+
+static const struct iio_chan_spec_ext_info vcnl4000_ext_info[] = {
+	{
+		.name = "nearlevel",
+		.shared = IIO_SEPARATE,
+		.read = vcnl4000_read_near_level,
+	},
+	{ /* sentinel */ }
+};
+
+static const struct iio_event_spec vcnl4000_event_spec[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	}
+};
+
+static const struct iio_chan_spec vcnl4000_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE),
+	}, {
+		.type = IIO_PROXIMITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.ext_info = vcnl4000_ext_info,
+	}
+};
+
+static const struct iio_chan_spec vcnl4010_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.scan_index = -1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE),
+	}, {
+		.type = IIO_PROXIMITY,
+		.scan_index = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.event_spec = vcnl4000_event_spec,
+		.num_event_specs = ARRAY_SIZE(vcnl4000_event_spec),
+		.ext_info = vcnl4000_ext_info,
+	},
+};
+
 static const struct iio_info vcnl4000_info = {
 	.read_raw = vcnl4000_read_raw,
 };
 
+static const struct iio_info vcnl4010_info = {
+	.read_raw = vcnl4010_read_raw,
+	.read_event_value = vcnl4010_read_event,
+	.write_event_value = vcnl4010_write_event,
+	.read_event_config = vcnl4010_read_event_config,
+	.write_event_config = vcnl4010_write_event_config,
+};
+
+static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
+	[VCNL4000] = {
+		.prod = "VCNL4000",
+		.init = vcnl4000_init,
+		.measure_light = vcnl4000_measure_light,
+		.measure_proximity = vcnl4000_measure_proximity,
+		.set_power_state = vcnl4000_set_power_state,
+		.channels = vcnl4000_channels,
+		.num_channels = ARRAY_SIZE(vcnl4000_channels),
+		.info = &vcnl4000_info,
+		.irq_support = false,
+	},
+	[VCNL4010] = {
+		.prod = "VCNL4010/4020",
+		.init = vcnl4000_init,
+		.measure_light = vcnl4000_measure_light,
+		.measure_proximity = vcnl4000_measure_proximity,
+		.set_power_state = vcnl4000_set_power_state,
+		.channels = vcnl4010_channels,
+		.num_channels = ARRAY_SIZE(vcnl4010_channels),
+		.info = &vcnl4010_info,
+		.irq_support = true,
+	},
+	[VCNL4040] = {
+		.prod = "VCNL4040",
+		.init = vcnl4200_init,
+		.measure_light = vcnl4200_measure_light,
+		.measure_proximity = vcnl4200_measure_proximity,
+		.set_power_state = vcnl4200_set_power_state,
+		.channels = vcnl4000_channels,
+		.num_channels = ARRAY_SIZE(vcnl4000_channels),
+		.info = &vcnl4000_info,
+		.irq_support = false,
+	},
+	[VCNL4200] = {
+		.prod = "VCNL4200",
+		.init = vcnl4200_init,
+		.measure_light = vcnl4200_measure_light,
+		.measure_proximity = vcnl4200_measure_proximity,
+		.set_power_state = vcnl4200_set_power_state,
+		.channels = vcnl4000_channels,
+		.num_channels = ARRAY_SIZE(vcnl4000_channels),
+		.info = &vcnl4000_info,
+		.irq_support = false,
+	},

drivers/iio/light/vcnl4000.c static int vcnl4000_read_raw(struct iio_dev *indio_dev, · line 790

Quoted 10 lines
drivers/iio/light/vcnl4000.c +10 -0
+};
+
+static irqreturn_t vcnl4010_irq_thread(int irq, void *p)
+{
+	struct iio_dev *indio_dev = p;
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+	unsigned long isr;
+	int ret;
+
+	mutex_lock(&data->vcnl4000_lock);

mutex needed?
does I2C need locking per se?

Quoted 51 lines
drivers/iio/light/vcnl4000.c +41 -3
+	ret = i2c_smbus_read_byte_data(data->client, VCNL4010_ISR);
+	mutex_unlock(&data->vcnl4000_lock);
+
+	if (ret < 0)
+		goto end;
+
+	isr = ret;
+
+	if (isr & VCNL4010_INT_THR) {
+		if (test_bit(VCNL4010_INT_THR_LOW, &isr)) {
+			iio_push_event(indio_dev,
+				       IIO_UNMOD_EVENT_CODE(
+					       IIO_PROXIMITY,
+					       1,
+					       IIO_EV_TYPE_THRESH,
+					       IIO_EV_DIR_FALLING),
+				       iio_get_time_ns(indio_dev));
+		}
+
+		if (test_bit(VCNL4010_INT_THR_HIGH, &isr)) {
+			iio_push_event(indio_dev,
+				       IIO_UNMOD_EVENT_CODE(
+					       IIO_PROXIMITY,
+					       1,
+					       IIO_EV_TYPE_THRESH,
+					       IIO_EV_DIR_RISING),
+				       iio_get_time_ns(indio_dev));
+		}
+
+		mutex_lock(&data->vcnl4000_lock);
+		i2c_smbus_write_byte_data(data->client, VCNL4010_ISR,
+					  isr & VCNL4010_INT_THR);
+		mutex_unlock(&data->vcnl4000_lock);
+	}
+
+end:
+	return IRQ_HANDLED;
+}
+
 static int vcnl4000_probe(struct i2c_client *client,
 			  const struct i2c_device_id *id)
 {
@@ -511,12 +856,25 @@ static int vcnl4000_probe(struct i2c_client *client,
 		data->near_level = 0;
 
 	indio_dev->dev.parent = &client->dev;
-	indio_dev->info = &vcnl4000_info;
-	indio_dev->channels = vcnl4000_channels;
-	indio_dev->num_channels = ARRAY_SIZE(vcnl4000_channels);
+	indio_dev->info = data->chip_spec->info;
+	indio_dev->channels = data->chip_spec->channels;

drivers/iio/light/vcnl4000.c static int vcnl4000_probe(struct i2c_client *client, · line 870

Quoted 10 lines
drivers/iio/light/vcnl4000.c +7 -0
+	indio_dev->num_channels = data->chip_spec->num_channels;
 	indio_dev->name = VCNL4000_DRV_NAME;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
+	if (client->irq && data->chip_spec->irq_support) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL, vcnl4010_irq_thread,
+						IRQF_TRIGGER_FALLING |
+						IRQF_ONESHOT,
+						"vncl4010_irq",

typo: vcnl4010_irq

Quoted 11 lines
drivers/iio/light/vcnl4000.c +7 -0
+						indio_dev);
+		if (ret < 0) {
+			dev_err(&client->dev, "irq request failed\n");
+			return ret;
+		}
+	}
+
 	ret = pm_runtime_set_active(&client->dev);
 	if (ret < 0)
 		goto fail_poweroff;
Signature · 2 lines
Peter Meerwald-Stadler
Mobile: +43 664 24 44 418
#6 lore raw

Re: [PATCH v3 2/4] iio: vcnl4000: Add event support for VCNL4010/20.

In reply to Mathieu Othacehe
Quoted 4 lines · Mathieu Othacehe

The VCNL4010 and VCNL4020 chips are able to raise interrupts on proximity threshold events. Add support for threshold rising and falling events for those two chips.

...

Quoted 1 line

+ ret = (ret & VCNL4000_SELF_TIMED_EN) > 0;

This can be done outside of lock.
And here is type violation. Use bool for the function.

Quoted 5 lines
drivers/iio/light/vcnl4000.c +5 -0
+end:
+       mutex_unlock(&data->vcnl4000_lock);
+
+       return ret;
+}

...

drivers/iio/light/vcnl4000.c static int vcnl4000_read_raw(struct iio_dev *indio_dev, · line 583

Quoted 7 lines
drivers/iio/light/vcnl4000.c +7 -0
+       ret = (ret & VCNL4010_INT_THR_EN) > 0;
+
+end:
+       mutex_unlock(&data->vcnl4000_lock);
+
+       return ret;
+}

Ditto.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#7 lore raw

PATCH v3 3/4 iio: vcnl4000: Add sampling frequency support for VCNL4010/20.

In reply to Mathieu Othacehe

Add sampling frequency support for ambient light and proximity data on VCNL4010 and VCNL4020 chips.

---
 drivers/iio/light/vcnl4000.c | 191 ++++++++++++++++++++++++++++++++++-
 1 file changed, 190 insertions(+), 1 deletion(-)
drivers/iio/light/vcnl4000.c +190 -1
index 73a3627d12b8..3f9d63858b51 100644
@@ -88,6 +88,24 @@
 #define VCNL4010_INT_DRDY \
 	(BIT(VCNL4010_INT_PROXIMITY) | BIT(VCNL4010_INT_ALS))
 
+#define VCNL4010_ALS_SAMPLING_FREQUENCY_AVAILABLE \
+	"1 2 3 4 5 6 8 10"
+#define VCNL4010_PROXIMITY_SAMPLING_FREQUENCY_AVAILABLE  \
+	"1.95 3.90 7.81 16.62 31.25 62.5 125 250"
+
+static const int vcnl4010_als_sampling_frequency[] = {
+	1, 2, 3, 4, 5, 6, 8, 10};
+
+static const int vcnl4010_prox_sampling_frequency[][2] = {
+	{1, 950000},
+	{3, 906250},
+	{7, 812500},
+	{16, 625000},
+	{31, 250000},
+	{62, 500000},
+	{125, 0},
+	{250, 0}
+};
 
 #define VCNL4000_SLEEP_DELAY_MS	2000 /* before we enter pm_runtime_suspend */
 
@@ -393,6 +411,50 @@ static int vcnl4200_measure_proximity(struct vcnl4000_data *data, int *val)
 	return vcnl4200_measure(data, &data->vcnl4200_ps, val);
 }
 
+static int vcnl4010_read_proxy_samp_freq(struct vcnl4000_data *data, int *val,
+					 int *val2)
+{
+	int ret;
+
+	mutex_lock(&data->vcnl4000_lock);
+
+	ret = i2c_smbus_read_byte_data(data->client, VCNL4010_PROX_RATE);
+	if (ret < 0)
+		goto end;
+
+	if (ret >= ARRAY_SIZE(vcnl4010_prox_sampling_frequency))
+		return -EINVAL;
+
+	*val = vcnl4010_prox_sampling_frequency[ret][0];
+	*val2 = vcnl4010_prox_sampling_frequency[ret][1];
+end:
+	mutex_unlock(&data->vcnl4000_lock);
+
+	return ret;
+}
+
+static int vcnl4010_read_als_samp_freq(struct vcnl4000_data *data, int *val)
+{
+	int ret;
+	int index, mask = 0x70;
+
+	mutex_lock(&data->vcnl4000_lock);
+
+	ret = i2c_smbus_read_byte_data(data->client, VCNL4010_ALS_PARAM);
+	if (ret < 0)
+		goto end;
+
+	index = (ret & mask) >> 4;
+	if (index < 0 || index >= ARRAY_SIZE(vcnl4010_als_sampling_frequency))
+		return -EINVAL;
+
+	*val = vcnl4010_als_sampling_frequency[index];
+end:
+	mutex_unlock(&data->vcnl4000_lock);
+
+	return ret;
+}
+
 static int vcnl4010_in_periodic_mode(struct vcnl4000_data *data)
 {
 	int ret;
@@ -493,11 +555,119 @@ static int vcnl4010_read_raw(struct iio_dev *indio_dev,
 
 		iio_device_release_direct_mode(indio_dev);
 		return ret;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		switch (chan->type) {
+		case IIO_PROXIMITY:
+			ret = vcnl4010_read_proxy_samp_freq(data, val, val2);
+			if (ret < 0)
+				return ret;
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_LIGHT:
+			ret = vcnl4010_read_als_samp_freq(data, val);
+			if (ret < 0)
+				return ret;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
 	default:
 		return -EINVAL;
 	}
 }
 
+static int vcnl4010_write_proxy_samp_freq(struct vcnl4000_data *data, int val,
+					  int val2)
+{
+	int ret;
+	int i;
+	int len = ARRAY_SIZE(vcnl4010_prox_sampling_frequency);
+
+	for (i = 0; i < len; i++) {
+		if (val <= vcnl4010_prox_sampling_frequency[i][0])
+			break;
+	}
+
+	if (i == len)
+		return -EINVAL;
+
+	mutex_lock(&data->vcnl4000_lock);
+	ret = i2c_smbus_write_byte_data(data->client, VCNL4010_PROX_RATE, i);
+	mutex_unlock(&data->vcnl4000_lock);
+
+	return ret;
+}
+
+static int vcnl4010_write_als_samp_freq(struct vcnl4000_data *data, int val)
+{
+	int ret;
+	int i;
+	int param;
+	int mask = 0x70;
+	int len = ARRAY_SIZE(vcnl4010_als_sampling_frequency);
+
+	for (i = 0; i < len; i++) {
+		if (val <= vcnl4010_als_sampling_frequency[i])
+			break;
+	}
+
+	if (i == len)
+		return -EINVAL;
+
+	mutex_lock(&data->vcnl4000_lock);
+
+	ret = i2c_smbus_read_byte_data(data->client, VCNL4010_ALS_PARAM);
+	if (ret < 0)
+		goto end;
+
+	param = (ret & ~mask) | (i << 4);
+	ret = i2c_smbus_write_byte_data(data->client, VCNL4010_ALS_PARAM,
+					param);
+end:
+	mutex_unlock(&data->vcnl4000_lock);
+
+	return ret;
+}
+
+static int vcnl4010_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
+{
+	int ret;
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+
+	/* Protect against event capture. */
+	if (vcnl4010_in_periodic_mode(data)) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		switch (chan->type) {
+		case IIO_PROXIMITY:
+			ret = vcnl4010_write_proxy_samp_freq(data, val, val2);
+			goto end;
+		case IIO_LIGHT:
+			ret = vcnl4010_write_als_samp_freq(data, val);
+			goto end;
+		default:
+			ret = -EINVAL;
+			goto end;
+		}
+	default:
+		ret = -EINVAL;
+		goto end;
+	}
+
+end:
+	iio_device_release_direct_mode(indio_dev);
+	return ret;
+}
+
 static int vcnl4010_read_event(struct iio_dev *indio_dev,
 			       const struct iio_chan_spec *chan,
 			       enum iio_event_type type,
@@ -710,27 +880,46 @@ static const struct iio_chan_spec vcnl4010_channels[] = {
 		.type = IIO_LIGHT,
 		.scan_index = -1,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SAMP_FREQ) |
 			BIT(IIO_CHAN_INFO_SCALE),
 	}, {
 		.type = IIO_PROXIMITY,
 		.scan_index = 0,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.event_spec = vcnl4000_event_spec,
 		.num_event_specs = ARRAY_SIZE(vcnl4000_event_spec),
 		.ext_info = vcnl4000_ext_info,
 	},
 };
 
+static IIO_CONST_ATTR(in_illuminance_sampling_frequency_available,
+		      VCNL4010_ALS_SAMPLING_FREQUENCY_AVAILABLE);
+static IIO_CONST_ATTR(in_proximity_sampling_frequency_available,
+		      VCNL4010_PROXIMITY_SAMPLING_FREQUENCY_AVAILABLE);
+
+static struct attribute *vcnl4010_attributes[] = {
+	&iio_const_attr_in_illuminance_sampling_frequency_available.dev_attr.attr,
+	&iio_const_attr_in_proximity_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group vcnl4010_attribute_group = {
+	.attrs = vcnl4010_attributes
+};
+
 static const struct iio_info vcnl4000_info = {
 	.read_raw = vcnl4000_read_raw,
 };
 
 static const struct iio_info vcnl4010_info = {
 	.read_raw = vcnl4010_read_raw,
+	.write_raw = vcnl4010_write_raw,
 	.read_event_value = vcnl4010_read_event,
 	.write_event_value = vcnl4010_write_event,
 	.read_event_config = vcnl4010_read_event_config,
 	.write_event_config = vcnl4010_write_event_config,
+	.attrs    = &vcnl4010_attribute_group,
 };
 
 static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
Signature · 1 line
2.26.0
#8 lore raw

Re: [PATCH v3 3/4] iio: vcnl4000: Add sampling frequency support for VCNL4010/20.

Quoted 2 lines · Mathieu Othacehe

Add sampling frequency support for ambient light and proximity data on VCNL4010 and VCNL4020 chips.

comments below

Quoted 36 lines
---
 drivers/iio/light/vcnl4000.c | 191 ++++++++++++++++++++++++++++++++++-
 1 file changed, 190 insertions(+), 1 deletion(-)
drivers/iio/light/vcnl4000.c +18 -0
index 73a3627d12b8..3f9d63858b51 100644
@@ -88,6 +88,24 @@
 #define VCNL4010_INT_DRDY \
 	(BIT(VCNL4010_INT_PROXIMITY) | BIT(VCNL4010_INT_ALS))
 
+#define VCNL4010_ALS_SAMPLING_FREQUENCY_AVAILABLE \
+	"1 2 3 4 5 6 8 10"
+#define VCNL4010_PROXIMITY_SAMPLING_FREQUENCY_AVAILABLE  \
+	"1.95 3.90 7.81 16.62 31.25 62.5 125 250"
+
+static const int vcnl4010_als_sampling_frequency[] = {
+	1, 2, 3, 4, 5, 6, 8, 10};
+
+static const int vcnl4010_prox_sampling_frequency[][2] = {
+	{1, 950000},
+	{3, 906250},
+	{7, 812500},
+	{16, 625000},
+	{31, 250000},
+	{62, 500000},
+	{125, 0},
+	{250, 0}
+};
 
 #define VCNL4000_SLEEP_DELAY_MS	2000 /* before we enter pm_runtime_suspend */
 

drivers/iio/light/vcnl4000.c static int vcnl4200_measure_proximity(struct vcnl4000_data *data, int *val) · line 419

Quoted 9 lines
drivers/iio/light/vcnl4000.c +6 -0
@@ -393,6 +411,50 @@ static int vcnl4200_measure_proximity(struct vcnl4000_data *data, int *val)
 	return vcnl4200_measure(data, &data->vcnl4200_ps, val);
 }
 
+static int vcnl4010_read_proxy_samp_freq(struct vcnl4000_data *data, int *val,
+					 int *val2)
+{
+	int ret;
+
+	mutex_lock(&data->vcnl4000_lock);

what is the mutex protecting?

vcnl4010_prox_sampling_frequency is read only, so no need to have that under mutex

Quoted 12 lines
drivers/iio/light/vcnl4000.c +12 -0
+
+	ret = i2c_smbus_read_byte_data(data->client, VCNL4010_PROX_RATE);
+	if (ret < 0)
+		goto end;
+
+	if (ret >= ARRAY_SIZE(vcnl4010_prox_sampling_frequency))
+		return -EINVAL;
+
+	*val = vcnl4010_prox_sampling_frequency[ret][0];
+	*val2 = vcnl4010_prox_sampling_frequency[ret][1];
+end:
+	mutex_unlock(&data->vcnl4000_lock);

drivers/iio/light/vcnl4000.c static int vcnl4200_measure_proximity(struct vcnl4000_data *data, int *val) · line 441

Quoted 10 lines
drivers/iio/light/vcnl4000.c +10 -0
+
+	return ret;
+}
+
+static int vcnl4010_read_als_samp_freq(struct vcnl4000_data *data, int *val)
+{
+	int ret;
+	int index, mask = 0x70;
+
+	mutex_lock(&data->vcnl4000_lock);

mutx use, same question

Quoted 39 lines
drivers/iio/light/vcnl4000.c +31 -0
+
+	ret = i2c_smbus_read_byte_data(data->client, VCNL4010_ALS_PARAM);
+	if (ret < 0)
+		goto end;
+
+	index = (ret & mask) >> 4;
+	if (index < 0 || index >= ARRAY_SIZE(vcnl4010_als_sampling_frequency))
+		return -EINVAL;
+
+	*val = vcnl4010_als_sampling_frequency[index];
+end:
+	mutex_unlock(&data->vcnl4000_lock);
+
+	return ret;
+}
+
 static int vcnl4010_in_periodic_mode(struct vcnl4000_data *data)
 {
 	int ret;
@@ -493,11 +555,119 @@ static int vcnl4010_read_raw(struct iio_dev *indio_dev,
 
 		iio_device_release_direct_mode(indio_dev);
 		return ret;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		switch (chan->type) {
+		case IIO_PROXIMITY:
+			ret = vcnl4010_read_proxy_samp_freq(data, val, val2);
+			if (ret < 0)
+				return ret;
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_LIGHT:
+			ret = vcnl4010_read_als_samp_freq(data, val);
+			if (ret < 0)
+				return ret;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
 	default:

drivers/iio/light/vcnl4000.c static int vcnl4010_read_raw(struct iio_dev *indio_dev, · line 583

Quoted 10 lines
drivers/iio/light/vcnl4000.c +6 -0
 		return -EINVAL;
 	}
 }
 
+static int vcnl4010_write_proxy_samp_freq(struct vcnl4000_data *data, int val,
+					  int val2)
+{
+	int ret;
+	int i;
+	int len = ARRAY_SIZE(vcnl4010_prox_sampling_frequency);

maybe const int len

Quoted 12 lines
drivers/iio/light/vcnl4000.c +12 -0
+
+	for (i = 0; i < len; i++) {
+		if (val <= vcnl4010_prox_sampling_frequency[i][0])
+			break;
+	}
+
+	if (i == len)
+		return -EINVAL;
+
+	mutex_lock(&data->vcnl4000_lock);
+	ret = i2c_smbus_write_byte_data(data->client, VCNL4010_PROX_RATE, i);
+	mutex_unlock(&data->vcnl4000_lock);

drivers/iio/light/vcnl4000.c static int vcnl4010_read_raw(struct iio_dev *indio_dev, · line 605

Quoted 10 lines
drivers/iio/light/vcnl4000.c +10 -0
+
+	return ret;
+}
+
+static int vcnl4010_write_als_samp_freq(struct vcnl4000_data *data, int val)
+{
+	int ret;
+	int i;
+	int param;
+	int mask = 0x70;

use #define, GENMASK()

Quoted 117 lines
drivers/iio/light/vcnl4000.c +85 -1
+	int len = ARRAY_SIZE(vcnl4010_als_sampling_frequency);
+
+	for (i = 0; i < len; i++) {
+		if (val <= vcnl4010_als_sampling_frequency[i])
+			break;
+	}
+
+	if (i == len)
+		return -EINVAL;
+
+	mutex_lock(&data->vcnl4000_lock);
+
+	ret = i2c_smbus_read_byte_data(data->client, VCNL4010_ALS_PARAM);
+	if (ret < 0)
+		goto end;
+
+	param = (ret & ~mask) | (i << 4);
+	ret = i2c_smbus_write_byte_data(data->client, VCNL4010_ALS_PARAM,
+					param);
+end:
+	mutex_unlock(&data->vcnl4000_lock);
+
+	return ret;
+}
+
+static int vcnl4010_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
+{
+	int ret;
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+
+	/* Protect against event capture. */
+	if (vcnl4010_in_periodic_mode(data)) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		switch (chan->type) {
+		case IIO_PROXIMITY:
+			ret = vcnl4010_write_proxy_samp_freq(data, val, val2);
+			goto end;
+		case IIO_LIGHT:
+			ret = vcnl4010_write_als_samp_freq(data, val);
+			goto end;
+		default:
+			ret = -EINVAL;
+			goto end;
+		}
+	default:
+		ret = -EINVAL;
+		goto end;
+	}
+
+end:
+	iio_device_release_direct_mode(indio_dev);
+	return ret;
+}
+
 static int vcnl4010_read_event(struct iio_dev *indio_dev,
 			       const struct iio_chan_spec *chan,
 			       enum iio_event_type type,
@@ -710,27 +880,46 @@ static const struct iio_chan_spec vcnl4010_channels[] = {
 		.type = IIO_LIGHT,
 		.scan_index = -1,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SAMP_FREQ) |
 			BIT(IIO_CHAN_INFO_SCALE),
 	}, {
 		.type = IIO_PROXIMITY,
 		.scan_index = 0,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.event_spec = vcnl4000_event_spec,
 		.num_event_specs = ARRAY_SIZE(vcnl4000_event_spec),
 		.ext_info = vcnl4000_ext_info,
 	},
 };
 
+static IIO_CONST_ATTR(in_illuminance_sampling_frequency_available,
+		      VCNL4010_ALS_SAMPLING_FREQUENCY_AVAILABLE);
+static IIO_CONST_ATTR(in_proximity_sampling_frequency_available,
+		      VCNL4010_PROXIMITY_SAMPLING_FREQUENCY_AVAILABLE);
+
+static struct attribute *vcnl4010_attributes[] = {
+	&iio_const_attr_in_illuminance_sampling_frequency_available.dev_attr.attr,
+	&iio_const_attr_in_proximity_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group vcnl4010_attribute_group = {
+	.attrs = vcnl4010_attributes
+};
+
 static const struct iio_info vcnl4000_info = {
 	.read_raw = vcnl4000_read_raw,
 };
 
 static const struct iio_info vcnl4010_info = {
 	.read_raw = vcnl4010_read_raw,
+	.write_raw = vcnl4010_write_raw,
 	.read_event_value = vcnl4010_read_event,
 	.write_event_value = vcnl4010_write_event,
 	.read_event_config = vcnl4010_read_event_config,
 	.write_event_config = vcnl4010_write_event_config,
+	.attrs    = &vcnl4010_attribute_group,
 };
 
 static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
Signature · 2 lines
Peter Meerwald-Stadler
Mobile: +43 664 24 44 418
#9 lore raw

Re: [PATCH v3 3/4] iio: vcnl4000: Add sampling frequency support for VCNL4010/20.

In reply to Mathieu Othacehe
Quoted 3 lines · Mathieu Othacehe

Add sampling frequency support for ambient light and proximity data on VCNL4010 and VCNL4020 chips.

...

drivers/iio/light/vcnl4000.c static const struct iio_chan_spec vcnl4010_channels[] = {

Quoted 5 lines
drivers/iio/light/vcnl4000.c +4 -0
+static struct attribute *vcnl4010_attributes[] = {
+       &iio_const_attr_in_illuminance_sampling_frequency_available.dev_attr.attr,
+       &iio_const_attr_in_proximity_sampling_frequency_available.dev_attr.attr,
 
+       NULL,

No comma for terminator line.

Quoted 1 line

+};

...

drivers/iio/light/vcnl4000.c static const struct iio_chan_spec vcnl4010_channels[] = { · line 908

Quoted 2 lines
drivers/iio/light/vcnl4000.c +2 -0
+static const struct attribute_group vcnl4010_attribute_group = {
+       .attrs = vcnl4010_attributes

Leave comma at the end in struct member definition.

Quoted 1 line

+};

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#10 lore raw

PATCH v3 4/4 iio: vcnl4000: Add buffer support for VCNL4010/20.

In reply to Mathieu Othacehe

The VCNL4010 and VCNL4020 chips are able to raise interrupts on data ready. Use it to provide triggered buffer support for proximity data.

Those two chips also provide ambient light data. However, they are sampled at different rate than proximity data. As this is not handled by the IIO framework for now, and the sample frequencies of ambient light data are very low, do add buffer support for them.

---
 drivers/iio/light/Kconfig    |   2 +
 drivers/iio/light/vcnl4000.c | 173 ++++++++++++++++++++++++++++++++++-
 2 files changed, 173 insertions(+), 2 deletions(-)
drivers/iio/light/Kconfig +2 -0
index 74970f18a93b..05f61b1e223a 100644
@@ -506,6 +506,8 @@ config US5182D
 
 config VCNL4000
 	tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	depends on I2C
 	help
 	  Say Y here if you want to build a driver for the Vishay VCNL4000,
drivers/iio/light/vcnl4000.c +171 -2

228 lines not on this page · raw message

Signature · 1 line
2.26.0