Skip to contentSkip to conversation

Add support for Allwinner H6 DVFS

PATCH In review Clément Péron 3 participants 13 messages Apr 20, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v5 cover Add support for Allwinner H6 DVFS

Hi,

This is the same as v4 and v3 on top.
I have also fix the commit title for Pine H64 as we now only enable CPU DVFS.

Sorry for the noise,
Clément

Clément Péron (6):
arm64: configs: Enable sun50i cpufreq nvmem
arm64: dts: allwinner: h6: Enable CPU opp tables for Beelink GS1
arm64: dts: allwinner: h6: Enable CPU opp tables for Orange Pi 3
arm64: dts: allwinner: h6: Enable CPU opp tables for Tanix TX6
arm64: dts: allwinner: Sort Pine H64 device-tree nodes
arm64: dts: allwinner: h6: Enable CPU opp tables for Pine H64

Ondrej Jirman (2):
arm64: dts: allwinner: h6: Add thermal trip points/cooling map
arm64: dts: allwinner: h6: Add CPU Operating Performance Points table

Yangtao Li (1):
arm64: dts: allwinner: h6: Add clock to CPU cores

 .../dts/allwinner/sun50i-h6-beelink-gs1.dts   |   9 +-
 .../boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi | 121 ++++++++++++++++++
 .../dts/allwinner/sun50i-h6-orangepi-3.dts    |   3 +
 .../boot/dts/allwinner/sun50i-h6-pine-h64.dts |  43 ++++---
 .../dts/allwinner/sun50i-h6-tanix-tx6.dts     |  13 ++
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  |  36 ++++++
 arch/arm64/configs/defconfig                  |   1 +
 7 files changed, 207 insertions(+), 19 deletions(-)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
Signature · 1 line
2.20.1
#1 lore raw

PATCH v5 1/9 arm64: dts: allwinner: h6: Add clock to CPU cores

From: Yangtao Li <[email protected]>

The ARM CPU cores are fed by the CPU clock from the CCU. Add a reference to the clock for each CPU core, along with the clock transition latency.

---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +8 -0
index a5ee68388bd3..370e77b86fe1 100644
@@ -25,6 +25,8 @@
 			device_type = "cpu";
 			reg = <0>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 
 		cpu1: cpu@1 {
@@ -32,6 +34,8 @@
 			device_type = "cpu";
 			reg = <1>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 
 		cpu2: cpu@2 {
@@ -39,6 +43,8 @@
 			device_type = "cpu";
 			reg = <2>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 
 		cpu3: cpu@3 {
@@ -46,6 +52,8 @@
 			device_type = "cpu";
 			reg = <3>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 	};
 
Signature · 1 line
2.20.1
#2 lore raw

PATCH v5 2/9 arm64: dts: allwinner: h6: Add thermal trip points/cooling map

In reply to Clément Péron

From: Ondrej Jirman <[email protected]>

This enables passive cooling by down-regulating CPU voltage and frequency.

---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 24 ++++++++++++++++++++
 1 file changed, 24 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +24 -0
index 370e77b86fe1..60da1627772b 100644
@@ -964,6 +964,30 @@
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		gpu-thermal {
Signature · 1 line
2.20.1
#3 lore raw

Re: [PATCH v5 2/9] arm64: dts: allwinner: h6: Add thermal trip points/cooling map

Hi,

Quoted 4 lines · Clément Péron

From: Ondrej Jirman <[email protected]>

This enables passive cooling by down-regulating CPU voltage and frequency.

Does this not produce a lot of warnings for you during compilation?

regards,

	o.
Quoted 44 lines
---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 24 ++++++++++++++++++++
 1 file changed, 24 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +24 -0
index 370e77b86fe1..60da1627772b 100644
@@ -964,6 +964,30 @@
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		gpu-thermal {
Signature · 1 line
2.20.1
#4 lore raw

Re: [PATCH v5 2/9] arm64: dts: allwinner: h6: Add thermal trip points/cooling map

Hi Ondrej,

Quoted 10 lines · Ondřej Jirman

Hi,

Quoted 4 lines · Clément Péron

From: Ondrej Jirman <[email protected]>

This enables passive cooling by down-regulating CPU voltage and frequency.

Does this not produce a lot of warnings for you during compilation?

I got flooded by lots of warnings, from sun50i-a64, stringray-usb, ipq6018 and didn't see but two are from sun50i-h6.

The #cooling-cells property is missing for CPU.

Will send a patch for noticing.

Regard,
Clement

Quoted 48 lines

regards,

        o.
Quoted 44 lines
---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 24 ++++++++++++++++++++
 1 file changed, 24 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +24 -1
index 370e77b86fe1..60da1627772b 100644
@@ -964,6 +964,30 @@
                      polling-delay-passive = <0>;
                      polling-delay = <0>;
                      thermal-sensors = <&ths 0>;
+
+                     trips {
+                             cpu_alert: cpu-alert {
+                                     temperature = <85000>;
+                                     hysteresis = <2000>;
+                                     type = "passive";
+                             };
+
+                             cpu-crit {
+                                     temperature = <100000>;
+                                     hysteresis = <0>;
+                                     type = "critical";
+                             };
+                     };
+
+                     cooling-maps {
+                             map0 {
+                                     trip = <&cpu_alert>;
+                                     cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+                                                      <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+                                                      <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+                                                      <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+                             };
+                     };
              };
 
              gpu-thermal {
--

2.20.1

#5 lore raw

PATCH v5 3/9 arm64: dts: allwinner: h6: Add CPU Operating Performance Points table

In reply to Clément Péron

From: Ondrej Jirman <[email protected]>

Add an Operating Performance Points table for the CPU cores to enable Dynamic Voltage & Frequency Scaling on the H6.

---
 .../boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi | 121 ++++++++++++++++++
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  |   4 +
 2 files changed, 125 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi new file +121 -0
new file mode 100644
index 000000000000..9ebd97b04b1a
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <[email protected]>
+// Copyright (C) 2020 Clément Péron <[email protected]>
+
+/ {
+	cpu_opp_table: cpu-opp-table {
+		compatible = "allwinner,sun50i-h6-operating-points";
+		nvmem-cells = <&cpu_speed_grade>;
+		opp-shared;
+
+		opp@480000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <480000000>;
+
+			opp-microvolt-speed0 = <880000>;
+			opp-microvolt-speed1 = <820000>;
+			opp-microvolt-speed2 = <820000>;
+		};
+
+		opp@720000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <720000000>;
+
+			opp-microvolt-speed0 = <880000>;
+			opp-microvolt-speed1 = <820000>;
+			opp-microvolt-speed2 = <820000>;
+		};
+
+		opp@816000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <816000000>;
+
+			opp-microvolt-speed0 = <880000>;
+			opp-microvolt-speed1 = <820000>;
+			opp-microvolt-speed2 = <820000>;
+		};
+
+		opp@888000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <888000000>;
+
+			opp-microvolt-speed0 = <880000>;
+			opp-microvolt-speed1 = <820000>;
+			opp-microvolt-speed2 = <820000>;
+		};
+
+		opp@1080000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1080000000>;
+
+			opp-microvolt-speed0 = <940000>;
+			opp-microvolt-speed1 = <880000>;
+			opp-microvolt-speed2 = <880000>;
+		};
+
+		opp@1320000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1320000000>;
+
+			opp-microvolt-speed0 = <1000000>;
+			opp-microvolt-speed1 = <940000>;
+			opp-microvolt-speed2 = <940000>;
+		};
+
+		opp@1488000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1488000000>;
+
+			opp-microvolt-speed0 = <1060000>;
+			opp-microvolt-speed1 = <1000000>;
+			opp-microvolt-speed2 = <1000000>;
+		};
+
+		opp@1608000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1608000000>;
+
+			opp-microvolt-speed0 = <1090000>;
+			opp-microvolt-speed1 = <1030000>;
+			opp-microvolt-speed2 = <1030000>;
+		};
+
+		opp@1704000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1704000000>;
+
+			opp-microvolt-speed0 = <1120000>;
+			opp-microvolt-speed1 = <1060000>;
+			opp-microvolt-speed2 = <1060000>;
+		};
+
+		opp@1800000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1800000000>;
+
+			opp-microvolt-speed0 = <1160000>;
+			opp-microvolt-speed1 = <1100000>;
+			opp-microvolt-speed2 = <1100000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+	#cooling-cells = <2>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+	#cooling-cells = <2>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+	#cooling-cells = <2>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+	#cooling-cells = <2>;
+};
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +4 -0
index 60da1627772b..83e32f9c4977 100644
@@ -258,6 +258,10 @@
 			ths_calibration: thermal-sensor-calibration@14 {
 				reg = <0x14 0x8>;
 			};
+
+			cpu_speed_grade: cpu-speed-grade@1c {
+				reg = <0x1c 0x4>;
+			};
 		};
 
 		watchdog: watchdog@30090a0 {
Signature · 1 line
2.20.1
#6 lore raw

PATCH v5 4/9 arm64: configs: Enable sun50i cpufreq nvmem

In reply to Clément Péron

Allwinner H6 needs this driver to be able to get
the correct speed_bin required for DVFS.

Enable this option in arm64 defconfig.

---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
index f9eefb5940ca..37e512c135ba 100644
@@ -84,6 +84,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
 CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_ACPI_CPPC_CPUFREQ=m
+CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=m
 CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
 CONFIG_ARM_SCPI_CPUFREQ=y
 CONFIG_ARM_IMX_CPUFREQ_DT=m
Signature · 1 line
2.20.1
#7 lore raw

PATCH v5 5/9 arm64: dts: allwinner: h6: Enable CPU opp tables for Beelink GS1

In reply to Clément Péron

Enable CPU opp tables for Beelink GS1.

This needs to change the CPU regulator max voltage to fit the OPP table.

Also add the ramp-delay information to avoid any out of spec running as the regulator is slower at reaching the voltage requested compare to the PLL reaching the frequency.

There is no such information for AXP805 but similar PMIC (AXP813) has a DVM (Dynamic Voltage scaling Management) ramp rate equal to 2500uV/us.

---
 arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +8 -1
index 8f09d209359b..3f7ceeb1a767 100644
@@ -4,6 +4,7 @@
 /dts-v1/;
 
 #include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -77,6 +78,10 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
 &de {
 	status = "okay";
 };
@@ -234,7 +239,8 @@
 			reg_dcdca: dcdca {
 				regulator-always-on;
 				regulator-min-microvolt = <810000>;
-				regulator-max-microvolt = <1080000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
 				regulator-name = "vdd-cpu";
 			};
 
@@ -242,6 +248,7 @@
 				regulator-enable-ramp-delay = <32000>;
 				regulator-min-microvolt = <810000>;
 				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
 				regulator-name = "vdd-gpu";
 			};
 
Signature · 1 line
2.20.1
#8 lore raw

PATCH v5 6/9 arm64: dts: allwinner: h6: Enable CPU opp tables for Orange Pi 3

In reply to Clément Péron

Enable CPU opp tables for Orange Pi 3.

This needs to change the CPU regulator max voltage to fit the OPP table.

Also add the ramp-delay information to avoid any out of spec running as the regulator is slower at reaching the voltage requested compare to the PLL reaching the frequency.

There is no such information for AXP805 but similar PMIC (AXP813) has a DVM (Dynamic Voltage scaling Management) ramp rate equal to 2500uV/us.

---
 arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts | 3 +++
 1 file changed, 3 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +3 -0
index 47f579610dcc..15c9dd8c4479 100644
@@ -4,6 +4,7 @@
 /dts-v1/;
 
 #include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -257,6 +258,7 @@
 				regulator-always-on;
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
 				regulator-name = "vdd-cpu";
 			};
 
@@ -264,6 +266,7 @@
 				regulator-enable-ramp-delay = <32000>;
 				regulator-min-microvolt = <810000>;
 				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
 				regulator-name = "vdd-gpu";
 			};
 
Signature · 1 line
2.20.1
#9 lore raw

PATCH v5 7/9 arm64: dts: allwinner: h6: Enable CPU opp tables for Tanix TX6

In reply to Clément Péron

Enable CPU opp tables for Tanix TX6.

Also add the fixed regulator that provided vdd-cpu-gpu required for CPU opp tables.

This voltage has been found using a voltmeter and could be wrong.

---
 .../boot/dts/allwinner/sun50i-h6-tanix-tx6.dts      | 13 +++++++++++++
 1 file changed, 13 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts +13 -0
index 83e6cb0e59ce..be81330db14f 100644
@@ -4,6 +4,7 @@
 /dts-v1/;
 
 #include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -37,6 +38,17 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	reg_vdd_cpu_gpu: vdd-cpu-gpu {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu-gpu";
+		regulator-min-microvolt = <1135000>;
+		regulator-max-microvolt = <1135000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpu_gpu>;
 };
 
 &de {
@@ -56,6 +68,7 @@
 };
 
 &gpu {
+	mali-supply = <&reg_vdd_cpu_gpu>;
 	status = "okay";
 };
 
Signature · 1 line
2.20.1
#10 lore raw

PATCH v5 8/9 arm64: dts: allwinner: Sort Pine H64 device-tree nodes

In reply to Clément Péron

Pine H64 device-tree have some nodes not properly sorted.

Fix this.

---
 .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 34 +++++++++----------
 1 file changed, 17 insertions(+), 17 deletions(-)
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +17 -17
index b0642d841933..63a785b534e1 100644
@@ -80,6 +80,18 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ext_rgmii_pins>;
@@ -91,17 +103,6 @@
 	status = "okay";
 };
 
-&mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
-&de {
-	status = "okay";
-};
-
 &gpu {
 	mali-supply = <&reg_dcdcc>;
 	status = "okay";
@@ -117,12 +118,11 @@
 	};
 };
 
-&ehci0 {
-	status = "okay";
-};
-
-&ehci3 {
-	status = "okay";
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
 };
 
 &mmc0 {
Signature · 1 line
2.20.1
#11 lore raw

PATCH v5 9/9 arm64: dts: allwinner: h6: Enable CPU opp tables for Pine H64

In reply to Clément Péron

Enable CPU and GPU opp tables for Pine H64.

This needs to change the CPU regulator max voltage to fit the OPP table.

Also add the ramp-delay information to avoid any out of spec running as the regulator is slower at reaching the voltage requested compare to the PLL reaching the frequency.

There is no such information for AXP805 but similar PMIC (AXP813) has a DVM (Dynamic Voltage scaling Management) ramp rate equal to 2500uV/us.

---
 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +8 -1
index 63a785b534e1..af85b2074867 100644
@@ -4,6 +4,7 @@
 /dts-v1/;
 
 #include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -80,6 +81,10 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
 &de {
 	status = "okay";
 };
@@ -238,7 +243,8 @@
 			reg_dcdca: dcdca {
 				regulator-always-on;
 				regulator-min-microvolt = <810000>;
-				regulator-max-microvolt = <1080000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
 				regulator-name = "vdd-cpu";
 			};
 
@@ -246,6 +252,7 @@
 				regulator-enable-ramp-delay = <32000>;
 				regulator-min-microvolt = <810000>;
 				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
 				regulator-name = "vdd-gpu";
 			};
 
Signature · 1 line
2.20.1
#12 lore raw
In reply to Clément Péron
Quoted 7 lines · Clément Péron

Hi,

This is the same as v4 and v3 on top.
I have also fix the commit title for Pine H64 as we now only enable CPU DVFS.

Sorry for the noise,
Clément

I dropped the previous ones and applied, thanks!
Maxime