Skip to contentSkip to conversation

nvmet: add target passthru commands support

PATCH Superseded Logan Gunthorpe 3 participants 15 messages Apr 20, 2020 – Apr 21, 2020

Subsystems (2)

v12 of 16 Superseded Latest is v16 →

lore
Share & tools
lore
#0 lore raw

v12 cover nvmet: add target passthru commands support

Hi,

This is v12 of the passthru patchset. Since last time this was submitted the get/set features were audited to ensure only appropriate features get passed through. The one that showed particular concern was the HOST_BEHAVIOR feature which I've solved by emulating and failing if the target host requests different behaviour than the device's host.

Below, I'll reiterrate some points I made previously that haven't been responded to:

I don't think cloning the ctrl_id or the subsysnqn is a good idea. I sent an email trying to explain why here[1] but there was no response. In short, I think cloning the ctrl_id will break multipathing over fabrics and copying the subsysnqn only has the effect of breaking loopback; the user can always copy the underlying subsysnqn if it makes sense for their overall system.

I maintain overriding the CMIC bit in the ctrl id is necessary to allow multipath over fabrics even if the underlying device did not support multipath.

I also think the black list for admin commands is appropriate, and I added it based on Sagi's feedback[2]. There are plenty of commands that may be dangerous like firmware update and format NVM commands, and NS attach commands won't work out of the box because we don't copy the ctrl_id. It seems like there's more commands to be careful of than ones that are that are obviously acceptable. So, I think the prudent course is blacklisting by default until someone has a usecase and can show the command is safe seems and makes sense. For our present use cases, the identify, log page and vendor specific commands are all that we care about.

A git branch is available here and is based on v5.7-rc1:

https://github.com/sbates130272/linux-p2pmem nvmet_passthru_v12

Thanks,

Logan

[1] https://lore.kernel.org/linux-block/[email protected]/
[2] https://lore.kernel.org/linux-block/[email protected]/

--

v12 Changes:
1. Rebased onto v5.7-rc1
2. Collected Sagi's Reviewed-by tags
3. Per Sagi's feedback implement an whitelist for set/get features and audit the features for whether they are suitable to be passed-through

v11 Changes:
1. Rebased onto v5.6-rc2
2. Collected Max's Reviewed-By tag

v10 Changes:
1. Rebased onto v5.5-rc1
2. Disable all exports in core nvme if CONFIG_NVME_TARGET_PASSTHRU is not set and put them near the end of the file with a big fat comment (per Christoph)
3. Don't fake up the vs field: pass it through as is and bump it to 1.2.1 if it is below that (per Christoph)
4. Rework how passthru requests are submitted into the core with proper nvme_passthru_start/end handling (per Christoph)
5. Rework how commands are parsed with passthru hooks in parse_admin_cmd() and nvmet_parse_io_cmd() (per Christoph)
6. Rework commands are handled so they are only done in a work item if absolutely necessary (per Christoph)
7. The data_len hack was dropped as a patchset was introduced to remove data_len altogether (per Christoph)
8. The passthru accounting changes are now in v5.5-rc1
9. A large number of other minor cleanups that were pointed out by Christoph

v9 Changes:
1. Rebased onto v5.4-rc2 (required adjusting nvme_identify_ns() usage)
2. Collected Sagi's Reviewed-By Tags
3. Squashed seperate Kconfig patch into passthru patch (Per Sagi)
4. Set REQ_FUA for flush requests and remove special casing on RQF_IO_STAT (Per Sagi)

v8 Changes:
1. Rebased onto v5.3-rc6
2. Collected Max's Reviewed-By tags
3. Converted admin command black-list to a white-list, but allow all vendor specific commands. With this, we feel it's safe to allow multiple connections from hosts. (As per Sagi's feedback)

v7 Changes:
1. Rebased onto v5.3-rc2
2. Rework nvme_ctrl_get_by_path() to use filp_open() instead of the cdev changes that were in v6. (Per Al)
3. Override the cmic bit to allow multipath and allow multiple connections from the same hostnqn. (At the same time I cleaned up the method of rejecting multiple connections.) See Patch 8)
4. Found a bug when used with the tcp transport (See Patch 10)

v6 Changes:
1. Rebased onto v5.3-rc1
2. Rework configfs interface to simply be a passthru directory within the existing subsystem. The directory is similar to and consistent with a namespace directory.
3. Have the configfs take a path instead of a bare controller name
4. Renamed the main passthru file to io-cmd-passthru.c for consistency with the file and block-dev methods.
5. Cleaned up all the CONFIG_NVME_TARGET_PASSTHRU usage to remove all the inline #ifdefs
6. Restructured nvmet_passthru_make_request() a bit for clearer code
7. Moved nvme_find_get_ns() call into nvmet_passthru_execute_cmd() seeing calling it in nvmet_req_init() causes a lockdep warning due to nvme_find_get_ns() being able to sleep.
8. Added a check in nvmet_passthru_execute_cmd() to ensure we don't violate queue_max_segments or queue_max_hw_sectors and overrode mdts to ensure hosts don't intentionally submit commands that will exceed these limits.
9. Reworked the code which ensures there's only one subsystem per passthru controller to use an xarray instead of a list as this is simpler and more easily fixed some bugs triggered by disabling subsystems that weren't enabled.
10. Removed the overide of the target cntlid with the passthru cntlid; this seemed like a really bad idea especially in the presence of mixed systems as you could end up with two ctrlrs with the same cntlid. For now, commands that depend on cntlid are black listed.
11. Implement block accounting for passthru so the target can track usage using /proc/diskstats
12. A number of other minor bug fixes and cleanups

v5 Changes (not sent to list, from Chaitanya):
1. Added workqueue for admin commands.
2. Added kconfig option for the pass-thru feature.
3. Restructure the parsing code according to your suggestion, call nvmet_xxx_parse_cmd() from nvmet_passthru_parse_cmd().
4. Use pass-thru instead of pt.
5. Several cleanups and add comments at the appropriate locations.
6. Minimize the code for checking pass-thru ns across all the subsystems.
7. Removed the delays in the ns related admin commands since I was not able to reproduce the previous bug.

v4 Changes:
1. Add request polling interface to the block layer.
2. Use request polling interface in the NVMEoF target passthru code path.
3. Add checks suggested by Sagi for creating one target ctrl per passthru ctrl.
4. Don't enable the namespace if it belongs to the configured passthru ctrl.
5. Adjust the code latest kernel.

v3 Changes:
1. Split the addition of passthru command handlers and integration into two different patches since we add guards to create one target controller per passthru controller. This way it will be easier to review the code.
2. Adjust the code for 4.18.

v2 Changes:
1. Update the new nvme core controller find API naming and changed the string comparison of the ctrl.
2. Get rid of the newly added #defines for target ctrl values.
3. Use the newly added structure members in the same patch where they are used. Aggregate the passthru command handling support and integration with nvmet-core into one patch.
4. Introduce global NVMe Target subsystem list for connected and not connected subsystems on the target side.
5. Add check when configuring the target ns and target passthru ctrl to allow only one target controller to be created for one passthru subsystem.
6. Use the passthru ctrl cntlid when creating the target controller.

--

Chaitanya Kulkarni (1):
nvmet-passthru: Introduce NVMet passthru Kconfig option

Logan Gunthorpe (8):
nvme-core: Clear any SGL flags in passthru commands
nvme: Create helper function to obtain command effects
nvme: Move nvme_passthru_[start|end]() calls to common helper
nvme-core: Introduce nvme_ctrl_get_by_path()
nvme: Export existing nvme core functions
nvmet-passthru: Add passthru code to process commands
nvmet-passthru: Add enable/disable helpers
nvmet-configfs: Introduce passthru configfs interface

 drivers/nvme/host/core.c        | 229 +++++++------
 drivers/nvme/host/nvme.h        |  14 +
 drivers/nvme/target/Kconfig     |  12 +
 drivers/nvme/target/Makefile    |   1 +
 drivers/nvme/target/admin-cmd.c |   7 +-
 drivers/nvme/target/configfs.c  | 103 ++++++
 drivers/nvme/target/core.c      |  13 +-
 drivers/nvme/target/nvmet.h     |  52 +++
 drivers/nvme/target/passthru.c  | 547 ++++++++++++++++++++++++++++++++
 include/linux/nvme.h            |   4 +
 10 files changed, 889 insertions(+), 93 deletions(-)
 create mode 100644 drivers/nvme/target/passthru.c

base-commit: 8f3d9f354286745c751374f5f1fcafee6b3f3136 --
2.20.1

#1 lore raw

PATCH v12 1/9 nvme-core: Clear any SGL flags in passthru commands

The host driver should decide whether to use SGLs or PRPs and they currently assume the flags are cleared after the call to nvme_setup_cmd(). However, passed-through commands may erroneously set these bits; so clear them for all cases.

---
 drivers/nvme/host/core.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/nvme/host/core.c +2 -0
index 91c1bd659947..f5283b300e87 100644
@@ -756,6 +756,8 @@ blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req,
 	case REQ_OP_DRV_IN:
 	case REQ_OP_DRV_OUT:
 		memcpy(cmd, nvme_req(req)->cmd, sizeof(*cmd));
+		/* passthru commands should let the driver set the SGL flags */
+		cmd->common.flags &= ~NVME_CMD_SGL_ALL;
 		break;
 	case REQ_OP_FLUSH:
 		nvme_setup_flush(ns, cmd);
Signature · 1 line
2.20.1
maintainer
#2 lore raw

Re: [PATCH v12 1/9] nvme-core: Clear any SGL flags in passthru commands

Quoted 16 lines · Logan Gunthorpe

The host driver should decide whether to use SGLs or PRPs and they currently assume the flags are cleared after the call to nvme_setup_cmd(). However, passed-through commands may erroneously set these bits; so clear them for all cases.

---
 drivers/nvme/host/core.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/nvme/host/core.c +0 -0
index 91c1bd659947..f5283b300e87 100644

drivers/nvme/host/core.c blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req, · line 761

Quoted 6 lines
drivers/nvme/host/core.c +2 -0
@@ -756,6 +756,8 @@ blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req,
 	case REQ_OP_DRV_IN:
 	case REQ_OP_DRV_OUT:
 		memcpy(cmd, nvme_req(req)->cmd, sizeof(*cmd));
+		/* passthru commands should let the driver set the SGL flags */
+		cmd->common.flags &= ~NVME_CMD_SGL_ALL;
 		break;

Is this really necessary? The passthrough handler currently rejects user commands that set command flags:

static int nvme_user_cmd(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
struct nvme_passthru_cmd __user *ucmd)

{
	...
	if (cmd.flags)
		return -EINVAL;
#3 lore raw

Re: [PATCH v12 1/9] nvme-core: Clear any SGL flags in passthru commands

Quoted 12 lines · Keith Busch
Quoted 11 lines · Logan Gunthorpe

The host driver should decide whether to use SGLs or PRPs and they currently assume the flags are cleared after the call to nvme_setup_cmd(). However, passed-through commands may erroneously set these bits; so clear them for all cases.

---
 drivers/nvme/host/core.c | 2 ++
 1 file changed, 2 insertions(+)
Quoted 14 lines

drivers/nvme/host/core.c blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req, · line 761

Quoted 11 lines
drivers/nvme/host/core.c +2 -0
index 91c1bd659947..f5283b300e87 100644
@@ -756,6 +756,8 @@ blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req,
 	case REQ_OP_DRV_IN:
 	case REQ_OP_DRV_OUT:
 		memcpy(cmd, nvme_req(req)->cmd, sizeof(*cmd));
+		/* passthru commands should let the driver set the SGL flags */
+		cmd->common.flags &= ~NVME_CMD_SGL_ALL;
 		break;

Is this really necessary? The passthrough handler currently rejects user commands that set command flags:

Yes, the flags coming from the passthru target's host (in subsequent patches in this series) may have these set and we need to clear them somewhere. The passthru code submits the requests directly using blk_execute_rq_nowait() and thus the check in nvme_user_cmd() doesn't apply.

If I recall correctly, we had originally cleared the flags in the target code, but Christoph had suggested it should be done more generally in nvme_setup_cmd().

Logan

#4 lore raw

PATCH v12 2/9 nvme: Create helper function to obtain command effects

In reply to Logan Gunthorpe

Separate the code to obtain command effects from the code to start a passthru request and open code nvme_known_admin_effects() in the new helper.

The new helper function will be necessary for nvmet passthru code to determine if we need to change out of interrupt context to handle the effects.

---
 drivers/nvme/host/core.c | 39 ++++++++++++++++++++++-----------------
 1 file changed, 22 insertions(+), 17 deletions(-)
drivers/nvme/host/core.c +22 -17
index f5283b300e87..fedcc5f18e03 100644
@@ -1317,22 +1317,8 @@ static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio)
 			metadata, meta_len, lower_32_bits(io.slba), NULL, 0);
 }
 
-static u32 nvme_known_admin_effects(u8 opcode)
-{
-	switch (opcode) {
-	case nvme_admin_format_nvm:
-		return NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC |
-					NVME_CMD_EFFECTS_CSE_MASK;
-	case nvme_admin_sanitize_nvm:
-		return NVME_CMD_EFFECTS_CSE_MASK;
-	default:
-		break;
-	}
-	return 0;
-}
-
-static u32 nvme_passthru_start(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
-								u8 opcode)
+static u32 nvme_command_effects(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
+				u8 opcode)
 {
 	u32 effects = 0;
 
@@ -1348,7 +1334,26 @@ static u32 nvme_passthru_start(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
 
 	if (ctrl->effects)
 		effects = le32_to_cpu(ctrl->effects->acs[opcode]);
-	effects |= nvme_known_admin_effects(opcode);
+
+	switch (opcode) {
+	case nvme_admin_format_nvm:
+		effects |= NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC |
+			NVME_CMD_EFFECTS_CSE_MASK;
+		break;
+	case nvme_admin_sanitize_nvm:
+		effects |= NVME_CMD_EFFECTS_CSE_MASK;
+		break;
+	default:
+		break;
+	}
+
+	return effects;
+}
+
+static u32 nvme_passthru_start(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
+			       u8 opcode)
+{
+	u32 effects = nvme_command_effects(ctrl, ns, opcode);
 
 	/*
 	 * For simplicity, IO to all namespaces is quiesced even if the command
Signature · 1 line
2.20.1
#5 lore raw

PATCH v12 3/9 nvme: Move nvme_passthru_[start|end]() calls to common helper

In reply to Logan Gunthorpe

Introduce a new nvme_execute_passthru_rq() helper which calls nvme_passthru_[start|end]() around blk_execute_rq(). This ensures all passthru calls (including nvme_submit_io()) will be wrapped appropriately.

nvme_execute_passthru_rq() will also be useful for the nvmet passthru code.

---
 drivers/nvme/host/core.c | 193 ++++++++++++++++++++-------------------
 1 file changed, 100 insertions(+), 93 deletions(-)
drivers/nvme/host/core.c +100 -93
index fedcc5f18e03..1e2062c341c5 100644
@@ -890,6 +890,105 @@ static void *nvme_add_user_metadata(struct bio *bio, void __user *ubuf,
 	return ERR_PTR(ret);
 }
 
+static u32 nvme_command_effects(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
+				u8 opcode)
+{
+	u32 effects = 0;
+
+	if (ns) {
+		if (ctrl->effects)
+			effects = le32_to_cpu(ctrl->effects->iocs[opcode]);
+		if (effects & ~(NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC))
+			dev_warn(ctrl->device,
+				 "IO command:%02x has unhandled effects:%08x\n",
+				 opcode, effects);
+		return 0;
+	}
+
+	if (ctrl->effects)
+		effects = le32_to_cpu(ctrl->effects->acs[opcode]);
+
+	switch (opcode) {
+	case nvme_admin_format_nvm:
+		effects |= NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC |
+			NVME_CMD_EFFECTS_CSE_MASK;
+		break;
+	case nvme_admin_sanitize_nvm:
+		effects |= NVME_CMD_EFFECTS_CSE_MASK;
+		break;
+	default:
+		break;
+	}
+
+	return effects & ~NVME_CMD_EFFECTS_CSUPP;
+}
+
+static u32 nvme_passthru_start(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
+			       u8 opcode)
+{
+	u32 effects = nvme_command_effects(ctrl, ns, opcode);
+
+	/*
+	 * For simplicity, IO to all namespaces is quiesced even if the command
+	 * effects say only one namespace is affected.
+	 */
+	if (effects & (NVME_CMD_EFFECTS_LBCC | NVME_CMD_EFFECTS_CSE_MASK)) {
+		mutex_lock(&ctrl->scan_lock);
+		mutex_lock(&ctrl->subsys->lock);
+		nvme_mpath_start_freeze(ctrl->subsys);
+		nvme_mpath_wait_freeze(ctrl->subsys);
+		nvme_start_freeze(ctrl);
+		nvme_wait_freeze(ctrl);
+	}
+	return effects;
+}
+
+static void nvme_update_formats(struct nvme_ctrl *ctrl)
+{
+	struct nvme_ns *ns;
+
+	down_read(&ctrl->namespaces_rwsem);
+	list_for_each_entry(ns, &ctrl->namespaces, list)
+		if (ns->disk && nvme_revalidate_disk(ns->disk))
+			nvme_set_queue_dying(ns);
+	up_read(&ctrl->namespaces_rwsem);
+}
+
+static void nvme_passthru_end(struct nvme_ctrl *ctrl, u32 effects)
+{
+	/*
+	 * Revalidate LBA changes prior to unfreezing. This is necessary to
+	 * prevent memory corruption if a logical block size was changed by
+	 * this command.
+	 */
+	if (effects & NVME_CMD_EFFECTS_LBCC)
+		nvme_update_formats(ctrl);
+	if (effects & (NVME_CMD_EFFECTS_LBCC | NVME_CMD_EFFECTS_CSE_MASK)) {
+		nvme_unfreeze(ctrl);
+		nvme_mpath_unfreeze(ctrl->subsys);
+		mutex_unlock(&ctrl->subsys->lock);
+		nvme_remove_invalid_namespaces(ctrl, NVME_NSID_ALL);
+		mutex_unlock(&ctrl->scan_lock);
+	}
+	if (effects & NVME_CMD_EFFECTS_CCC)
+		nvme_init_identify(ctrl);
+	if (effects & (NVME_CMD_EFFECTS_NIC | NVME_CMD_EFFECTS_NCC))
+		nvme_queue_scan(ctrl);
+}
+
+static void nvme_execute_passthru_rq(struct request *rq)
+{
+	struct nvme_command *cmd = nvme_req(rq)->cmd;
+	struct nvme_ctrl *ctrl = nvme_req(rq)->ctrl;
+	struct nvme_ns *ns = rq->q->queuedata;
+	struct gendisk *disk = ns ? ns->disk : NULL;
+	u32 effects;
+
+	effects = nvme_passthru_start(ctrl, ns, cmd->common.opcode);
+	blk_execute_rq(rq->q, disk, rq, 0);
+	nvme_passthru_end(ctrl, effects);
+}
+
 static int nvme_submit_user_cmd(struct request_queue *q,
 		struct nvme_command *cmd, void __user *ubuffer,
 		unsigned bufflen, void __user *meta_buffer, unsigned meta_len,
@@ -928,7 +1027,7 @@ static int nvme_submit_user_cmd(struct request_queue *q,
 		}
 	}
 
-	blk_execute_rq(req->q, disk, req, 0);
+	nvme_execute_passthru_rq(req);
 	if (nvme_req(req)->flags & NVME_REQ_CANCELLED)
 		ret = -EINTR;
 	else
@@ -1317,99 +1416,12 @@ static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio)
 			metadata, meta_len, lower_32_bits(io.slba), NULL, 0);
 }
 
-static u32 nvme_command_effects(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
-				u8 opcode)
-{
-	u32 effects = 0;
-
-	if (ns) {
-		if (ctrl->effects)
-			effects = le32_to_cpu(ctrl->effects->iocs[opcode]);
-		if (effects & ~(NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC))
-			dev_warn(ctrl->device,
-				 "IO command:%02x has unhandled effects:%08x\n",
-				 opcode, effects);
-		return 0;
-	}
-
-	if (ctrl->effects)
-		effects = le32_to_cpu(ctrl->effects->acs[opcode]);
-
-	switch (opcode) {
-	case nvme_admin_format_nvm:
-		effects |= NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC |
-			NVME_CMD_EFFECTS_CSE_MASK;
-		break;
-	case nvme_admin_sanitize_nvm:
-		effects |= NVME_CMD_EFFECTS_CSE_MASK;
-		break;
-	default:
-		break;
-	}
-
-	return effects;
-}
-
-static u32 nvme_passthru_start(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
-			       u8 opcode)
-{
-	u32 effects = nvme_command_effects(ctrl, ns, opcode);
-
-	/*
-	 * For simplicity, IO to all namespaces is quiesced even if the command
-	 * effects say only one namespace is affected.
-	 */
-	if (effects & (NVME_CMD_EFFECTS_LBCC | NVME_CMD_EFFECTS_CSE_MASK)) {
-		mutex_lock(&ctrl->scan_lock);
-		mutex_lock(&ctrl->subsys->lock);
-		nvme_mpath_start_freeze(ctrl->subsys);
-		nvme_mpath_wait_freeze(ctrl->subsys);
-		nvme_start_freeze(ctrl);
-		nvme_wait_freeze(ctrl);
-	}
-	return effects;
-}
-
-static void nvme_update_formats(struct nvme_ctrl *ctrl)
-{
-	struct nvme_ns *ns;
-
-	down_read(&ctrl->namespaces_rwsem);
-	list_for_each_entry(ns, &ctrl->namespaces, list)
-		if (ns->disk && nvme_revalidate_disk(ns->disk))
-			nvme_set_queue_dying(ns);
-	up_read(&ctrl->namespaces_rwsem);
-}
-
-static void nvme_passthru_end(struct nvme_ctrl *ctrl, u32 effects)
-{
-	/*
-	 * Revalidate LBA changes prior to unfreezing. This is necessary to
-	 * prevent memory corruption if a logical block size was changed by
-	 * this command.
-	 */
-	if (effects & NVME_CMD_EFFECTS_LBCC)
-		nvme_update_formats(ctrl);
-	if (effects & (NVME_CMD_EFFECTS_LBCC | NVME_CMD_EFFECTS_CSE_MASK)) {
-		nvme_unfreeze(ctrl);
-		nvme_mpath_unfreeze(ctrl->subsys);
-		mutex_unlock(&ctrl->subsys->lock);
-		nvme_remove_invalid_namespaces(ctrl, NVME_NSID_ALL);
-		mutex_unlock(&ctrl->scan_lock);
-	}
-	if (effects & NVME_CMD_EFFECTS_CCC)
-		nvme_init_identify(ctrl);
-	if (effects & (NVME_CMD_EFFECTS_NIC | NVME_CMD_EFFECTS_NCC))
-		nvme_queue_scan(ctrl);
-}
-
 static int nvme_user_cmd(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
 			struct nvme_passthru_cmd __user *ucmd)
 {
 	struct nvme_passthru_cmd cmd;
 	struct nvme_command c;
 	unsigned timeout = 0;
-	u32 effects;
 	u64 result;
 	int status;
 
@@ -1436,12 +1448,10 @@ static int nvme_user_cmd(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
 	if (cmd.timeout_ms)
 		timeout = msecs_to_jiffies(cmd.timeout_ms);
 
-	effects = nvme_passthru_start(ctrl, ns, cmd.opcode);
 	status = nvme_submit_user_cmd(ns ? ns->queue : ctrl->admin_q, &c,
 			nvme_to_user_ptr(cmd.addr), cmd.data_len,
 			nvme_to_user_ptr(cmd.metadata), cmd.metadata_len,
 			0, &result, timeout);
-	nvme_passthru_end(ctrl, effects);
 
 	if (status >= 0) {
 		if (put_user(result, &ucmd->result))
@@ -1457,7 +1467,6 @@ static int nvme_user_cmd64(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
 	struct nvme_passthru_cmd64 cmd;
 	struct nvme_command c;
 	unsigned timeout = 0;
-	u32 effects;
 	int status;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -1483,12 +1492,10 @@ static int nvme_user_cmd64(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
 	if (cmd.timeout_ms)
 		timeout = msecs_to_jiffies(cmd.timeout_ms);
 
-	effects = nvme_passthru_start(ctrl, ns, cmd.opcode);
 	status = nvme_submit_user_cmd(ns ? ns->queue : ctrl->admin_q, &c,
 			nvme_to_user_ptr(cmd.addr), cmd.data_len,
 			nvme_to_user_ptr(cmd.metadata), cmd.metadata_len,
 			0, &cmd.result, timeout);
-	nvme_passthru_end(ctrl, effects);
 
 	if (status >= 0) {
 		if (put_user(cmd.result, &ucmd->result))
Signature · 1 line
2.20.1
#6 lore raw

PATCH v12 4/9 nvmet-passthru: Introduce NVMet passthru Kconfig option

In reply to Logan Gunthorpe

From: Chaitanya Kulkarni <[email protected]>

This patch updates KConfig file for the NVMeOF target where we add new option so that user can selectively enable/disable passthru code.

[[email protected]: fixed some of the wording in the help message]
---
 drivers/nvme/target/Kconfig | 12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/nvme/target/Kconfig +12 -0
index d7f48c0fb311..1ef775fa0048 100644
@@ -15,6 +15,18 @@ config NVME_TARGET
 	  To configure the NVMe target you probably want to use the nvmetcli
 	  tool from http://git.infradead.org/users/hch/nvmetcli.git.
 
+config NVME_TARGET_PASSTHRU
+	bool "NVMe Target Passthrough support"
+	depends on NVME_CORE
+	depends on NVME_TARGET
+	help
+	  This enables target side NVMe passthru controller support for the
+	  NVMe Over Fabrics protocol. It allows for hosts to manage and
+	  directly access an actual NVMe controller residing on the target
+	  side, incuding executing Vendor Unique Commands.
+
+	  If unsure, say N.
+
 config NVME_TARGET_LOOP
 	tristate "NVMe loopback device support"
 	depends on NVME_TARGET
Signature · 1 line
2.20.1
#8 lore raw

PATCH v12 5/9 nvme-core: Introduce nvme_ctrl_get_by_path()

In reply to Logan Gunthorpe

nvme_ctrl_get_by_path() is analagous to blkdev_get_by_path() except it gets a struct nvme_ctrl from the path to its char dev (/dev/nvme0). It makes use of filp_open() to open the file and uses the private data to obtain a pointer to the struct nvme_ctrl. If the fops of the file do not match, -EINVAL is returned.

The purpose of this function is to support NVMe-OF target passthru.

---
 drivers/nvme/host/core.c | 31 +++++++++++++++++++++++++++++++
 drivers/nvme/host/nvme.h |  9 +++++++++
 2 files changed, 40 insertions(+)
drivers/nvme/host/core.c +31 -0
index 1e2062c341c5..1f3ef53bb8b4 100644
@@ -4303,6 +4303,37 @@ void nvme_sync_queues(struct nvme_ctrl *ctrl)
 }
 EXPORT_SYMBOL_GPL(nvme_sync_queues);
 
+#ifdef CONFIG_NVME_TARGET_PASSTHRU
+/*
+ * The exports that follow within this ifdef are only for
+ * use by the nvmet-passthru and should not be used for
+ * other things.
+ */
+
+struct nvme_ctrl *nvme_ctrl_get_by_path(const char *path)
+{
+	struct nvme_ctrl *ctrl;
+	struct file *f;
+
+	f = filp_open(path, O_RDWR, 0);
+	if (IS_ERR(f))
+		return ERR_CAST(f);
+
+	if (f->f_op != &nvme_dev_fops) {
+		ctrl = ERR_PTR(-EINVAL);
+		goto out_close;
+	}
+
+	ctrl = f->private_data;
+	nvme_get_ctrl(ctrl);
+
+out_close:
+	filp_close(f, NULL);
+	return ctrl;
+}
+EXPORT_SYMBOL_GPL(nvme_ctrl_get_by_path);
+#endif /* CONFIG_NVME_TARGET_PASSTHRU */
+
 /*
  * Check we didn't inadvertently grow the command structure sizes:
  */
drivers/nvme/host/nvme.h +9 -0
index 2e04a36296d9..9195dd97b61b 100644
@@ -689,4 +689,13 @@ void nvme_hwmon_init(struct nvme_ctrl *ctrl);
 static inline void nvme_hwmon_init(struct nvme_ctrl *ctrl) { }
 #endif
 
+#ifdef CONFIG_NVME_TARGET_PASSTHRU
+/*
+ * The exports that follow within this ifdef are only for
+ * use by the nvmet-passthru and should not be used for
+ * other things.
+ */
+struct nvme_ctrl *nvme_ctrl_get_by_path(const char *path);
+#endif /* CONFIG_NVME_TARGET_PASSTHRU */
+
 #endif /* _NVME_H */
Signature · 1 line
2.20.1
#9 lore raw

PATCH v12 6/9 nvme: Export existing nvme core functions

In reply to Logan Gunthorpe

Export nvme_put_ns(), nvme_command_effects(), nvme_execute_passthru_rq() and nvme_find_get_ns() for use in the nvmet passthru code.

The exports are conditional on CONFIG_NVME_TARGET_PASSTHRU.

---
 drivers/nvme/host/core.c | 14 +++++++++-----
 drivers/nvme/host/nvme.h |  5 +++++
 2 files changed, 14 insertions(+), 5 deletions(-)
drivers/nvme/host/core.c +9 -5
index 1f3ef53bb8b4..6dfc7d90ce87 100644
@@ -457,7 +457,7 @@ static void nvme_free_ns(struct kref *kref)
 	kfree(ns);
 }
 
-static void nvme_put_ns(struct nvme_ns *ns)
+void nvme_put_ns(struct nvme_ns *ns)
 {
 	kref_put(&ns->kref, nvme_free_ns);
 }
@@ -890,8 +890,8 @@ static void *nvme_add_user_metadata(struct bio *bio, void __user *ubuf,
 	return ERR_PTR(ret);
 }
 
-static u32 nvme_command_effects(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
-				u8 opcode)
+u32 nvme_command_effects(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
+			 u8 opcode)
 {
 	u32 effects = 0;
 
@@ -976,7 +976,7 @@ static void nvme_passthru_end(struct nvme_ctrl *ctrl, u32 effects)
 		nvme_queue_scan(ctrl);
 }
 
-static void nvme_execute_passthru_rq(struct request *rq)
+void nvme_execute_passthru_rq(struct request *rq)
 {
 	struct nvme_command *cmd = nvme_req(rq)->cmd;
 	struct nvme_ctrl *ctrl = nvme_req(rq)->ctrl;
@@ -3530,7 +3530,7 @@ static int ns_cmp(void *priv, struct list_head *a, struct list_head *b)
 	return nsa->head->ns_id - nsb->head->ns_id;
 }
 
-static struct nvme_ns *nvme_find_get_ns(struct nvme_ctrl *ctrl, unsigned nsid)
+struct nvme_ns *nvme_find_get_ns(struct nvme_ctrl *ctrl, unsigned nsid)
 {
 	struct nvme_ns *ns, *ret = NULL;
 
@@ -4309,6 +4309,10 @@ EXPORT_SYMBOL_GPL(nvme_sync_queues);
  * use by the nvmet-passthru and should not be used for
  * other things.
  */
+EXPORT_SYMBOL_GPL(nvme_put_ns);
+EXPORT_SYMBOL_GPL(nvme_command_effects);
+EXPORT_SYMBOL_GPL(nvme_execute_passthru_rq);
+EXPORT_SYMBOL_GPL(nvme_find_get_ns);
 
 struct nvme_ctrl *nvme_ctrl_get_by_path(const char *path)
 {
drivers/nvme/host/nvme.h +5 -0
index 9195dd97b61b..76b4aa8f35e1 100644
@@ -695,6 +695,11 @@ static inline void nvme_hwmon_init(struct nvme_ctrl *ctrl) { }
  * use by the nvmet-passthru and should not be used for
  * other things.
  */
+void nvme_put_ns(struct nvme_ns *ns);
+u32 nvme_command_effects(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
+			 u8 opcode);
+void nvme_execute_passthru_rq(struct request *rq);
+struct nvme_ns *nvme_find_get_ns(struct nvme_ctrl *ctrl, unsigned int nsid);
 struct nvme_ctrl *nvme_ctrl_get_by_path(const char *path);
 #endif /* CONFIG_NVME_TARGET_PASSTHRU */
 
Signature · 1 line
2.20.1
#10 lore raw

PATCH v12 7/9 nvmet-passthru: Add passthru code to process commands

In reply to Logan Gunthorpe

Add passthru command handling capability for the NVMeOF target and export passthru APIs which are used to integrate passthru code with nvmet-core.

The new file passthru.c handles passthru cmd parsing and execution. In the passthru mode, we create a block layer request from the nvmet request and map the data on to the block layer request.

Admin commands and features are on a white list as there are a number of each that don't make too much sense with passthrough. We use a white list so that new commands can be considered before being blindly passed through. In both cases, vendor specific commands are always allowed.

We also blacklist reservation IO commands as the underlying device cannot differentiate between multiple hosts behind a fabric.

---
 drivers/nvme/target/Makefile    |   1 +
 drivers/nvme/target/admin-cmd.c |   7 +-
 drivers/nvme/target/core.c      |   3 +
 drivers/nvme/target/nvmet.h     |  39 +++
 drivers/nvme/target/passthru.c  | 460 ++++++++++++++++++++++++++++++++
 include/linux/nvme.h            |   4 +
 6 files changed, 512 insertions(+), 2 deletions(-)
 create mode 100644 drivers/nvme/target/passthru.c
drivers/nvme/target/Makefile +1 -0
index 2b33836f3d3e..ebf91fc4c72e 100644
@@ -11,6 +11,7 @@ obj-$(CONFIG_NVME_TARGET_TCP)		+= nvmet-tcp.o
 
 nvmet-y		+= core.o configfs.o admin-cmd.o fabrics-cmd.o \
 			discovery.o io-cmd-file.o io-cmd-bdev.o
+nvmet-$(CONFIG_NVME_TARGET_PASSTHRU)	+= passthru.o
 nvme-loop-y	+= loop.o
 nvmet-rdma-y	+= rdma.o
 nvmet-fc-y	+= fc.o
drivers/nvme/target/admin-cmd.c +5 -2
index 9d6f75cfa77c..a2dfd202eb32 100644
@@ -734,7 +734,7 @@ u16 nvmet_set_feat_async_event(struct nvmet_req *req, u32 mask)
 	return 0;
 }
 
-static void nvmet_execute_set_features(struct nvmet_req *req)
+void nvmet_execute_set_features(struct nvmet_req *req)
 {
 	struct nvmet_subsys *subsys = req->sq->ctrl->subsys;
 	u32 cdw10 = le32_to_cpu(req->cmd->common.cdw10);
@@ -809,7 +809,7 @@ void nvmet_get_feat_async_event(struct nvmet_req *req)
 	nvmet_set_result(req, READ_ONCE(req->sq->ctrl->aen_enabled));
 }
 
-static void nvmet_execute_get_features(struct nvmet_req *req)
+void nvmet_execute_get_features(struct nvmet_req *req)
 {
 	struct nvmet_subsys *subsys = req->sq->ctrl->subsys;
 	u32 cdw10 = le32_to_cpu(req->cmd->common.cdw10);
@@ -925,6 +925,9 @@ u16 nvmet_parse_admin_cmd(struct nvmet_req *req)
 	if (unlikely(ret))
 		return ret;
 
+	if (nvmet_req_passthru_ctrl(req))
+		return nvmet_parse_passthru_admin_cmd(req);
+
 	switch (cmd->common.opcode) {
 	case nvme_admin_get_log_page:
 		req->execute = nvmet_execute_get_log_page;
drivers/nvme/target/core.c +3 -0
index b685f99d56a1..2547e0d8951c 100644
@@ -841,6 +841,9 @@ static u16 nvmet_parse_io_cmd(struct nvmet_req *req)
 	if (unlikely(ret))
 		return ret;
 
+	if (nvmet_req_passthru_ctrl(req))
+		return nvmet_parse_passthru_io_cmd(req);
+
 	req->ns = nvmet_find_namespace(req->sq->ctrl, cmd->rw.nsid);
 	if (unlikely(!req->ns)) {
 		req->error_loc = offsetof(struct nvme_common_command, nsid);
drivers/nvme/target/nvmet.h +39 -0
index 421dff3ea143..deb996c90804 100644
@@ -237,6 +237,10 @@ struct nvmet_subsys {
 	struct config_group	allowed_hosts_group;
 
 	struct nvmet_subsys_model	__rcu *model;
+
+#ifdef CONFIG_NVME_TARGET_PASSTHRU
+	struct nvme_ctrl	*passthru_ctrl;
+#endif /* CONFIG_NVME_TARGET_PASSTHRU */
 };
 
 static inline struct nvmet_subsys *to_subsys(struct config_item *item)
@@ -313,6 +317,11 @@ struct nvmet_req {
 			struct bio_vec          *bvec;
 			struct work_struct      work;
 		} f;
+		struct {
+			struct request		*rq;
+			struct work_struct      work;
+			u16 (*end_req)(struct nvmet_req *req);
+		} p;
 	};
 	int			sg_cnt;
 	/* data length as parsed from the SGL descriptor: */
@@ -390,6 +399,8 @@ void nvmet_req_complete(struct nvmet_req *req, u16 status);
 int nvmet_req_alloc_sgl(struct nvmet_req *req);
 void nvmet_req_free_sgl(struct nvmet_req *req);
 
+void nvmet_execute_set_features(struct nvmet_req *req);
+void nvmet_execute_get_features(struct nvmet_req *req);
 void nvmet_execute_keep_alive(struct nvmet_req *req);
 
 void nvmet_cq_setup(struct nvmet_ctrl *ctrl, struct nvmet_cq *cq, u16 qid,
@@ -511,6 +522,34 @@ static inline u32 nvmet_dsm_len(struct nvmet_req *req)
 		sizeof(struct nvme_dsm_range);
 }
 
+#ifdef CONFIG_NVME_TARGET_PASSTHRU
+u16 nvmet_parse_passthru_admin_cmd(struct nvmet_req *req);
+u16 nvmet_parse_passthru_io_cmd(struct nvmet_req *req);
+static inline struct nvme_ctrl *nvmet_passthru_ctrl(struct nvmet_subsys *subsys)
+{
+	return subsys->passthru_ctrl;
+}
+#else /* CONFIG_NVME_TARGET_PASSTHRU */
+static inline u16 nvmet_parse_passthru_admin_cmd(struct nvmet_req *req)
+{
+	return 0;
+}
+static inline u16 nvmet_parse_passthru_io_cmd(struct nvmet_req *req)
+{
+	return 0;
+}
+static inline struct nvme_ctrl *nvmet_passthru_ctrl(struct nvmet_subsys *subsys)
+{
+	return NULL;
+}
+#endif /* CONFIG_NVME_TARGET_PASSTHRU */
+
+static inline struct nvme_ctrl *
+nvmet_req_passthru_ctrl(struct nvmet_req *req)
+{
+	return nvmet_passthru_ctrl(req->sq->ctrl->subsys);
+}
+
 u16 errno_to_nvme_status(struct nvmet_req *req, int errno);
 
 /* Convert a 32-bit number to a 16-bit 0's based number */
drivers/nvme/target/passthru.c new file +460 -0

460 lines not on this page · raw message

include/linux/nvme.h +4 -0
index 3d5189f46cb1..af807e0fb114 100644
@@ -303,6 +303,7 @@ enum {
 	NVME_CTRL_ONCS_WRITE_UNCORRECTABLE	= 1 << 1,
 	NVME_CTRL_ONCS_DSM			= 1 << 2,
 	NVME_CTRL_ONCS_WRITE_ZEROES		= 1 << 3,
+	NVME_CTRL_ONCS_RESERVATIONS		= 1 << 5,
 	NVME_CTRL_ONCS_TIMESTAMP		= 1 << 6,
 	NVME_CTRL_VWC_PRESENT			= 1 << 0,
 	NVME_CTRL_OACS_SEC_SUPP                 = 1 << 0,
@@ -858,6 +859,7 @@ enum nvme_admin_opcode {
 	nvme_admin_security_recv	= 0x82,
 	nvme_admin_sanitize_nvm		= 0x84,
 	nvme_admin_get_lba_status	= 0x86,
+	nvme_admin_vendor_start		= 0xC0,
 };
 
 #define nvme_admin_opcode_name(opcode)	{ opcode, #opcode }
@@ -921,6 +923,8 @@ enum {
 	NVME_FEAT_RESV_MASK	= 0x82,
 	NVME_FEAT_RESV_PERSIST	= 0x83,
 	NVME_FEAT_WRITE_PROTECT	= 0x84,
+	NVME_FEAT_VENDOR_START	= 0xC0,
+	NVME_FEAT_VENDOR_END	= 0xFF,
 	NVME_LOG_ERROR		= 0x01,
 	NVME_LOG_SMART		= 0x02,
 	NVME_LOG_FW_SLOT	= 0x03,
Signature · 1 line
2.20.1
#12 lore raw

PATCH v12 8/9 nvmet-passthru: Add enable/disable helpers

In reply to Logan Gunthorpe

This patch adds helper functions which are used in the NVMeOF configfs when the user is configuring the passthru subsystem. Here we ensure that only one subsys is assigned to each nvme_ctrl by using an xarray on the cntlid.

The subsystem's version number is overridden by the passed through controller's version. However, if that version is less than 1.2.1, then we bump the advertised version to that and print a warning in dmesg.

---
 drivers/nvme/target/configfs.c |  4 ++
 drivers/nvme/target/core.c     | 10 +++-
 drivers/nvme/target/nvmet.h    | 12 +++++
 drivers/nvme/target/passthru.c | 87 ++++++++++++++++++++++++++++++++++
 4 files changed, 112 insertions(+), 1 deletion(-)
drivers/nvme/target/configfs.c +4 -0
index 58cabd7b6fc5..e0ce6e5feb3a 100644
@@ -826,6 +826,10 @@ static ssize_t nvmet_subsys_attr_version_store(struct config_item *item,
 	int major, minor, tertiary = 0;
 	int ret;
 
+	/* passthru subsystems use the underlying controller's version */
+	if (nvmet_passthru_ctrl(subsys))
+		return -EINVAL;
+
 	ret = sscanf(page, "%d.%d.%d\n", &major, &minor, &tertiary);
 	if (ret != 2 && ret != 3)
 		return -EINVAL;
drivers/nvme/target/core.c +9 -1
index 2547e0d8951c..a2cdd35ffb1d 100644
@@ -522,6 +522,12 @@ int nvmet_ns_enable(struct nvmet_ns *ns)
 
 	mutex_lock(&subsys->lock);
 	ret = 0;
+
+	if (nvmet_passthru_ctrl(subsys)) {
+		pr_info("cannot enable both passthru and regular namespaces for a single subsystem");
+		goto out_unlock;
+	}
+
 	if (ns->enabled)
 		goto out_unlock;
 
@@ -1421,7 +1427,7 @@ struct nvmet_subsys *nvmet_subsys_alloc(const char *subsysnqn,
 	if (!subsys)
 		return ERR_PTR(-ENOMEM);
 
-	subsys->ver = NVME_VS(1, 3, 0); /* NVMe 1.3.0 */
+	subsys->ver = NVMET_DEFAULT_VS;
 	/* generate a random serial number as our controllers are ephemeral: */
 	get_random_bytes(&subsys->serial, sizeof(subsys->serial));
 
@@ -1463,6 +1469,8 @@ static void nvmet_subsys_free(struct kref *ref)
 
 	WARN_ON_ONCE(!list_empty(&subsys->namespaces));
 
+	nvmet_passthru_subsys_free(subsys);
+
 	kfree(subsys->subsysnqn);
 	kfree_rcu(subsys->model, rcuhead);
 	kfree(subsys);
drivers/nvme/target/nvmet.h +12 -0
index deb996c90804..76c3a7cb9c89 100644
@@ -20,6 +20,8 @@
 #include <linux/blkdev.h>
 #include <linux/radix-tree.h>
 
+#define NVMET_DEFAULT_VS		NVME_VS(1, 3, 0)
+
 #define NVMET_ASYNC_EVENTS		4
 #define NVMET_ERROR_LOG_SLOTS		128
 #define NVMET_NO_ERROR_LOC		((u16)-1)
@@ -240,6 +242,7 @@ struct nvmet_subsys {
 
 #ifdef CONFIG_NVME_TARGET_PASSTHRU
 	struct nvme_ctrl	*passthru_ctrl;
+	char			*passthru_ctrl_path;
 #endif /* CONFIG_NVME_TARGET_PASSTHRU */
 };
 
@@ -523,6 +526,9 @@ static inline u32 nvmet_dsm_len(struct nvmet_req *req)
 }
 
 #ifdef CONFIG_NVME_TARGET_PASSTHRU
+void nvmet_passthru_subsys_free(struct nvmet_subsys *subsys);
+int nvmet_passthru_ctrl_enable(struct nvmet_subsys *subsys);
+void nvmet_passthru_ctrl_disable(struct nvmet_subsys *subsys);
 u16 nvmet_parse_passthru_admin_cmd(struct nvmet_req *req);
 u16 nvmet_parse_passthru_io_cmd(struct nvmet_req *req);
 static inline struct nvme_ctrl *nvmet_passthru_ctrl(struct nvmet_subsys *subsys)
@@ -530,6 +536,12 @@ static inline struct nvme_ctrl *nvmet_passthru_ctrl(struct nvmet_subsys *subsys)
 	return subsys->passthru_ctrl;
 }
 #else /* CONFIG_NVME_TARGET_PASSTHRU */
+static inline void nvmet_passthru_subsys_free(struct nvmet_subsys *subsys)
+{
+}
+static inline void nvmet_passthru_ctrl_disable(struct nvmet_subsys *subsys)
+{
+}
 static inline u16 nvmet_parse_passthru_admin_cmd(struct nvmet_req *req)
 {
 	return 0;
drivers/nvme/target/passthru.c +87 -0

96 lines not on this page · raw message

Signature · 1 line
2.20.1
#14 lore raw

PATCH v12 9/9 nvmet-configfs: Introduce passthru configfs interface

In reply to Logan Gunthorpe

When CONFIG_NVME_TARGET_PASSTHRU as 'passthru' directory will be added to each subsystem. The directory is similar to a namespace and has two attributes: device_path and enable. The user must set the path to the nvme controller's char device and write '1' to enable the subsystem to use passthru.

Any given subsystem is prevented from enabling both a regular namespace and the passthru device. If one is enabled, enabling the other will produce an error.

---
 drivers/nvme/target/configfs.c | 99 ++++++++++++++++++++++++++++++++++
 drivers/nvme/target/nvmet.h    |  1 +
 2 files changed, 100 insertions(+)
drivers/nvme/target/configfs.c +99 -0
index e0ce6e5feb3a..59eb52a0d06c 100644
@@ -613,6 +613,103 @@ static const struct config_item_type nvmet_namespaces_type = {
 	.ct_owner		= THIS_MODULE,
 };
 
+#ifdef CONFIG_NVME_TARGET_PASSTHRU
+
+static ssize_t nvmet_passthru_device_path_show(struct config_item *item,
+		char *page)
+{
+	struct nvmet_subsys *subsys = to_subsys(item->ci_parent);
+
+	return snprintf(page, PAGE_SIZE, "%s\n", subsys->passthru_ctrl_path);
+}
+
+static ssize_t nvmet_passthru_device_path_store(struct config_item *item,
+		const char *page, size_t count)
+{
+	struct nvmet_subsys *subsys = to_subsys(item->ci_parent);
+	size_t len;
+	int ret;
+
+	mutex_lock(&subsys->lock);
+
+	ret = -EBUSY;
+	if (subsys->passthru_ctrl)
+		goto out_unlock;
+
+	ret = -EINVAL;
+	len = strcspn(page, "\n");
+	if (!len)
+		goto out_unlock;
+
+	kfree(subsys->passthru_ctrl_path);
+	ret = -ENOMEM;
+	subsys->passthru_ctrl_path = kstrndup(page, len, GFP_KERNEL);
+	if (!subsys->passthru_ctrl_path)
+		goto out_unlock;
+
+	mutex_unlock(&subsys->lock);
+
+	return count;
+out_unlock:
+	mutex_unlock(&subsys->lock);
+	return ret;
+}
+CONFIGFS_ATTR(nvmet_passthru_, device_path);
+
+static ssize_t nvmet_passthru_enable_show(struct config_item *item,
+		char *page)
+{
+	struct nvmet_subsys *subsys = to_subsys(item->ci_parent);
+
+	return sprintf(page, "%d\n", subsys->passthru_ctrl ? 1 : 0);
+}
+
+static ssize_t nvmet_passthru_enable_store(struct config_item *item,
+		const char *page, size_t count)
+{
+	struct nvmet_subsys *subsys = to_subsys(item->ci_parent);
+	bool enable;
+	int ret = 0;
+
+	if (strtobool(page, &enable))
+		return -EINVAL;
+
+	if (enable)
+		ret = nvmet_passthru_ctrl_enable(subsys);
+	else
+		nvmet_passthru_ctrl_disable(subsys);
+
+	return ret ? ret : count;
+}
+CONFIGFS_ATTR(nvmet_passthru_, enable);
+
+static struct configfs_attribute *nvmet_passthru_attrs[] = {
+	&nvmet_passthru_attr_device_path,
+	&nvmet_passthru_attr_enable,
+	NULL,
+};
+
+static const struct config_item_type nvmet_passthru_type = {
+	.ct_attrs		= nvmet_passthru_attrs,
+	.ct_owner		= THIS_MODULE,
+};
+
+static void nvmet_add_passthru_group(struct nvmet_subsys *subsys)
+{
+	config_group_init_type_name(&subsys->passthru_group,
+				    "passthru", &nvmet_passthru_type);
+	configfs_add_default_group(&subsys->passthru_group,
+				   &subsys->group);
+}
+
+#else /* CONFIG_NVME_TARGET_PASSTHRU */
+
+static void nvmet_add_passthru_group(struct nvmet_subsys *subsys)
+{
+}
+
+#endif /* CONFIG_NVME_TARGET_PASSTHRU */
+
 static int nvmet_port_subsys_allow_link(struct config_item *parent,
 		struct config_item *target)
 {
@@ -1047,6 +1144,8 @@ static struct config_group *nvmet_subsys_make(struct config_group *group,
 	configfs_add_default_group(&subsys->allowed_hosts_group,
 			&subsys->group);
 
+	nvmet_add_passthru_group(subsys);
+
 	return &subsys->group;
 }
 
drivers/nvme/target/nvmet.h +1 -0
index 76c3a7cb9c89..d40452e50212 100644
@@ -243,6 +243,7 @@ struct nvmet_subsys {
 #ifdef CONFIG_NVME_TARGET_PASSTHRU
 	struct nvme_ctrl	*passthru_ctrl;
 	char			*passthru_ctrl_path;
+	struct config_group	passthru_group;
 #endif /* CONFIG_NVME_TARGET_PASSTHRU */
 };
 
Signature · 1 line
2.20.1