Skip to contentSkip to conversation

coresight: tmc: Fix TMC mode read in tmc_read_prepare_etb()

PATCH In review Sai Prakash Ranjan 2 participants 2 messages Apr 16, 2020 – Apr 20, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 coresight: tmc: Fix TMC mode read in tmc_read_prepare_etb()

On some QCOM platforms like SC7180, SDM845 and SM8150, reading TMC mode register without proper coresight power management can lead to async exceptions like the one in the call trace below in tmc_read_prepare_etb(). This can happen if the user tries to read the TMC etf data via device node without setting up source and the sink first. Fix this by having a check for coresight sysfs mode before reading TMC mode management register.

 Kernel panic - not syncing: Asynchronous SError Interrupt
 CPU: 7 PID: 2605 Comm: hexdump Tainted: G S                5.4.30 #122
 Call trace:
  dump_backtrace+0x0/0x188
  show_stack+0x20/0x2c
  dump_stack+0xdc/0x144
  panic+0x168/0x36c
  panic+0x0/0x36c
  arm64_serror_panic+0x78/0x84
  do_serror+0x130/0x138
  el1_error+0x84/0xf8
  tmc_read_prepare_etb+0x88/0xb8
  tmc_open+0x40/0xd8
  misc_open+0x120/0x158
  chrdev_open+0xb8/0x1a4
  do_dentry_open+0x268/0x3a0
  vfs_open+0x34/0x40
  path_openat+0x39c/0xdf4
  do_filp_open+0x90/0x10c
  do_sys_open+0x150/0x3e8
  __arm64_compat_sys_openat+0x28/0x34
  el0_svc_common+0xa8/0x160
  el0_svc_compat_handler+0x2c/0x38
  el0_svc_compat+0x8/0x10
Fixes 4525412a5046 ("coresight: tmc: making prepare/unprepare functions generic")

---
v2:
* Move the TMC mode read under CS_MODE_SYSFS as per Mathieu

---
 drivers/hwtracing/coresight/coresight-tmc-etf.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/hwtracing/coresight/coresight-tmc-etf.c +8 -8
index d0cc3985b72a..36cce2bfb744 100644
@@ -596,13 +596,6 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata)
 		goto out;
 	}
 
-	/* There is no point in reading a TMC in HW FIFO mode */
-	mode = readl_relaxed(drvdata->base + TMC_MODE);
-	if (mode != TMC_MODE_CIRCULAR_BUFFER) {
-		ret = -EINVAL;
-		goto out;
-	}
-
 	/* Don't interfere if operated from Perf */
 	if (drvdata->mode == CS_MODE_PERF) {
 		ret = -EINVAL;
@@ -616,8 +609,15 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata)
 	}
 
 	/* Disable the TMC if need be */
-	if (drvdata->mode == CS_MODE_SYSFS)
+	if (drvdata->mode == CS_MODE_SYSFS) {
+		/* There is no point in reading a TMC in HW FIFO mode */
+		mode = readl_relaxed(drvdata->base + TMC_MODE);
+		if (mode != TMC_MODE_CIRCULAR_BUFFER) {
+			ret = -EINVAL;
+			goto out;
+		}
 		__tmc_etb_disable_hw(drvdata);
+	}
 
 	drvdata->reading = true;
 out:
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
#1 lore raw
Quoted 34 lines · Sai Prakash Ranjan

On some QCOM platforms like SC7180, SDM845 and SM8150, reading TMC mode register without proper coresight power management can lead to async exceptions like the one in the call trace below in tmc_read_prepare_etb(). This can happen if the user tries to read the TMC etf data via device node without setting up source and the sink first. Fix this by having a check for coresight sysfs mode before reading TMC mode management register.

 Kernel panic - not syncing: Asynchronous SError Interrupt
 CPU: 7 PID: 2605 Comm: hexdump Tainted: G S                5.4.30 #122
 Call trace:
  dump_backtrace+0x0/0x188
  show_stack+0x20/0x2c
  dump_stack+0xdc/0x144
  panic+0x168/0x36c
  panic+0x0/0x36c
  arm64_serror_panic+0x78/0x84
  do_serror+0x130/0x138
  el1_error+0x84/0xf8
  tmc_read_prepare_etb+0x88/0xb8
  tmc_open+0x40/0xd8
  misc_open+0x120/0x158
  chrdev_open+0xb8/0x1a4
  do_dentry_open+0x268/0x3a0
  vfs_open+0x34/0x40
  path_openat+0x39c/0xdf4
  do_filp_open+0x90/0x10c
  do_sys_open+0x150/0x3e8
  __arm64_compat_sys_openat+0x28/0x34
  el0_svc_common+0xa8/0x160
  el0_svc_compat_handler+0x2c/0x38
  el0_svc_compat+0x8/0x10
Quoted 4 lines
Fixes 4525412a5046 ("coresight: tmc: making prepare/unprepare functions generic")

Applied - thanks,
Mathieu

Quoted 45 lines

---
v2:
* Move the TMC mode read under CS_MODE_SYSFS as per Mathieu

---
 drivers/hwtracing/coresight/coresight-tmc-etf.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/hwtracing/coresight/coresight-tmc-etf.c +8 -8
index d0cc3985b72a..36cce2bfb744 100644
@@ -596,13 +596,6 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata)
 		goto out;
 	}
 
-	/* There is no point in reading a TMC in HW FIFO mode */
-	mode = readl_relaxed(drvdata->base + TMC_MODE);
-	if (mode != TMC_MODE_CIRCULAR_BUFFER) {
-		ret = -EINVAL;
-		goto out;
-	}
-
 	/* Don't interfere if operated from Perf */
 	if (drvdata->mode == CS_MODE_PERF) {
 		ret = -EINVAL;
@@ -616,8 +609,15 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata)
 	}
 
 	/* Disable the TMC if need be */
-	if (drvdata->mode == CS_MODE_SYSFS)
+	if (drvdata->mode == CS_MODE_SYSFS) {
+		/* There is no point in reading a TMC in HW FIFO mode */
+		mode = readl_relaxed(drvdata->base + TMC_MODE);
+		if (mode != TMC_MODE_CIRCULAR_BUFFER) {
+			ret = -EINVAL;
+			goto out;
+		}
 		__tmc_etb_disable_hw(drvdata);
+	}
 
 	drvdata->reading = true;
 out:
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation