Skip to contentSkip to conversation

mtd: spi-nor: Make spansion_set_4byte_addr_mode() private

PATCH In review [email protected] 1 participant 2 messages Apr 20, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mtd: spi-nor: Make spansion_set_4byte_addr_mode() private

From: Tudor Ambarus <[email protected]>

spansion_set_4byte_addr_mode() is used just by the spansion flashes, make the method private.

Here is how the set_4byte_addr_mode() method is treated in SPI NOR:
- atmel, catalist, everspin, fujitsu, intel, sst, xilinx are too small for a set_4byte_addr_method.
- eon, gidadevice, issi, macronix, xmc use EN4B/EX4B.
- micron-st uses st_micron_set_4byte_addr_mode()
- winbond uses winbond_set_4byte_addr_mode().
- newer spansion have a 4BAM opcode (support not added). Older spansion flashes use the BRWR command (spansion_set_4byte_addr_mode())

---
 drivers/mtd/spi-nor/core.c     | 35 ----------------------------
 drivers/mtd/spi-nor/spansion.c | 42 ++++++++++++++++++++++++++++++++++
 include/linux/mtd/spi-nor.h    |  1 -
 3 files changed, 42 insertions(+), 36 deletions(-)
drivers/mtd/spi-nor/core.c +0 -35
index cc68ea84318e..148cbf134bb9 100644
@@ -397,40 +397,6 @@ int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
 	return ret;
 }
 
-/**
- * spansion_set_4byte_addr_mode() - Set 4-byte address mode for Spansion
- * flashes.
- * @nor:	pointer to 'struct spi_nor'.
- * @enable:	true to enter the 4-byte address mode, false to exit the 4-byte
- *		address mode.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spansion_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
-{
-	int ret;
-
-	nor->bouncebuf[0] = enable << 7;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_BRWR, 1),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1));
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = nor->controller_ops->write_reg(nor, SPINOR_OP_BRWR,
-						     nor->bouncebuf, 1);
-	}
-
-	if (ret)
-		dev_dbg(nor->dev, "error %d setting 4-byte mode\n", ret);
-
-	return ret;
-}
-
 /**
  * spi_nor_write_ear() - Write Extended Address Register.
  * @nor:	pointer to 'struct spi_nor'.
@@ -2724,7 +2690,6 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
 
 	/* Initialize legacy flash parameters and settings. */
 	params->quad_enable = spi_nor_sr2_bit1_quad_enable;
-	params->set_4byte_addr_mode = spansion_set_4byte_addr_mode;
 	params->setup = spi_nor_default_setup;
 	/* Default to 16-bit Write Status (01h) Command */
 	nor->flags |= SNOR_F_HAS_16BIT_SR;
drivers/mtd/spi-nor/spansion.c +42 -0

60 lines not on this page · raw message

include/linux/mtd/spi-nor.h +0 -1
index 1cc8ed5d59ed..7373ba6fbb42 100644
@@ -97,7 +97,6 @@
 #define SPINOR_OP_EX4B		0xe9	/* Exit 4-byte mode */
 
 /* Used for Spansion flashes only. */
-#define SPINOR_OP_BRWR		0x17	/* Bank register write */
 #define SPINOR_OP_CLSR		0x30	/* Clear status register 1 */
 
 /* Used for Micron flashes only. */
Signature · 5 lines
2.23.0

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
#1 lore raw
Quoted 2 lines · On Monday, April 20, 2020 8:44:47 PM EEST Tudor Ambarus - M18064 wrote:

spansion_set_4byte_addr_mode() is used just by the spansion flashes, make the method private.

The subject should be reworded to "mtd: spi-nor: Move spansion_set_4byte_addr_mode() in spansion.c", because as of now this function is already private, but in the core.

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/