Skip to contentSkip to conversation

arm64: pointer authentication initialization cleanup

PATCH Applied Mark Rutland 3 participants 6 messages Apr 23, 2020 – Apr 28, 2020 arm64

lore
Share & tools
lore

Mark Rutland

author reviewer
#0 lore raw

cover arm64: pointer authentication initialization cleanup

These patches refactor the pointer authentication initialization code to make it easier to reason about and to reduce duplication of code.

The big wins are:

* Moving the initialization after the MMU has been enabled. This means we can initialize the keys using the same helpers as context switch, and don't need to temporarily duplicate them in secondary_data.

* Moving primary/secondary conditional initialization into the respective primary/secondary boot paths. This minimizes potentially-confusing control flow and still allows for code sharing via helper macros.

I've given this a spin on a foundation model, with userspace and kernel tests, playing with CPU hotplug, etc.

Patches based on v5.7-rc2. These have no dependency on my fix queued in for-next/core.

Thanks,
Mark.

Mark Rutland (2):
arm64: remove ptrauth_keys_install_kernel sync arg
arm64: simplify ptrauth initialization

 arch/arm64/include/asm/asm_pointer_auth.h | 43 +++++++++++++++++++++++++----
 arch/arm64/include/asm/smp.h              | 11 --------
 arch/arm64/kernel/asm-offsets.c           |  3 --
 arch/arm64/kernel/entry.S                 |  4 +--
 arch/arm64/kernel/head.S                  | 12 ++++++--
 arch/arm64/kernel/sleep.S                 |  1 -
 arch/arm64/kernel/smp.c                   |  8 ------
 arch/arm64/mm/proc.S                      | 46 +------------------------------
 8 files changed, 51 insertions(+), 77 deletions(-)
Signature · 7 lines
2.11.0


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author reviewer
#1 lore raw

PATCH 1/2 arm64: remove ptrauth_keys_install_kernel sync arg

The 'sync' argument to ptrauth_keys_install_kernel macro is somewhat opaque at callsites, so instead lets have regular and _nosync variants of the macro to make this a little more obvious.

Cc Amit Daniel Kachhap <[email protected]>
Cc Catalin Marinas <[email protected]>
Cc Will Deacon <[email protected]>
---
 arch/arm64/include/asm/asm_pointer_auth.h | 21 ++++++++++++++++-----
 arch/arm64/kernel/entry.S                 |  4 ++--
 arch/arm64/mm/proc.S                      |  2 +-
 3 files changed, 19 insertions(+), 8 deletions(-)
arch/arm64/include/asm/asm_pointer_auth.h +16 -5
index ce2a8486992b..c85540a911d3 100644
@@ -39,16 +39,24 @@ alternative_if ARM64_HAS_GENERIC_AUTH
 alternative_else_nop_endif
 	.endm
 
-	.macro ptrauth_keys_install_kernel tsk, sync, tmp1, tmp2, tmp3
-alternative_if ARM64_HAS_ADDRESS_AUTH
+	.macro __ptrauth_keys_install_kernel_nosync tsk, tmp1, tmp2, tmp3
 	mov	\tmp1, #THREAD_KEYS_KERNEL
 	add	\tmp1, \tsk, \tmp1
 	ldp	\tmp2, \tmp3, [\tmp1, #PTRAUTH_KERNEL_KEY_APIA]
 	msr_s	SYS_APIAKEYLO_EL1, \tmp2
 	msr_s	SYS_APIAKEYHI_EL1, \tmp3
-	.if     \sync == 1
+	.endm
+
+	.macro ptrauth_keys_install_kernel_nosync tsk, tmp1, tmp2, tmp3
+alternative_if ARM64_HAS_ADDRESS_AUTH
+	__ptrauth_keys_install_kernel_nosync \tsk, \tmp1, \tmp2, \tmp3
+alternative_else_nop_endif
+	.endm
+
+	.macro ptrauth_keys_install_kernel tsk, tmp1, tmp2, tmp3
+alternative_if ARM64_HAS_ADDRESS_AUTH
+	__ptrauth_keys_install_kernel_nosync \tsk, \tmp1, \tmp2, \tmp3
 	isb
-	.endif
 alternative_else_nop_endif
 	.endm
 
@@ -57,7 +65,10 @@ alternative_else_nop_endif
 	.macro ptrauth_keys_install_user tsk, tmp1, tmp2, tmp3
 	.endm
 
-	.macro ptrauth_keys_install_kernel tsk, sync, tmp1, tmp2, tmp3
+	.macro ptrauth_keys_install_kernel_nosync tsk, tmp1, tmp2, tmp3
+	.endm
+
+	.macro ptrauth_keys_install_kernel tsk, tmp1, tmp2, tmp3
 	.endm
 
 #endif /* CONFIG_ARM64_PTR_AUTH */
arch/arm64/kernel/entry.S +2 -2
index ddcde093c433..a9265fef914f 100644
@@ -178,7 +178,7 @@ alternative_cb_end
 
 	apply_ssbd 1, x22, x23
 
-	ptrauth_keys_install_kernel tsk, 1, x20, x22, x23
+	ptrauth_keys_install_kernel tsk, x20, x22, x23
 	.else
 	add	x21, sp, #S_FRAME_SIZE
 	get_current_task tsk
@@ -900,7 +900,7 @@ SYM_FUNC_START(cpu_switch_to)
 	ldr	lr, [x8]
 	mov	sp, x9
 	msr	sp_el0, x1
-	ptrauth_keys_install_kernel x1, 1, x8, x9, x10
+	ptrauth_keys_install_kernel x1, x8, x9, x10
 	ret
 SYM_FUNC_END(cpu_switch_to)
 NOKPROBE(cpu_switch_to)
arch/arm64/mm/proc.S +1 -1
index 197a9ba2d5ea..0401342741e6 100644
@@ -139,7 +139,7 @@ alternative_if ARM64_HAS_RAS_EXTN
 	msr_s	SYS_DISR_EL1, xzr
 alternative_else_nop_endif
 
-	ptrauth_keys_install_kernel x14, 0, x1, x2, x3
+	ptrauth_keys_install_kernel_nosync x14, x1, x2, x3
 	isb
 	ret
 SYM_FUNC_END(cpu_do_resume)
Signature · 7 lines
2.11.0


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author reviewer
#2 lore raw

PATCH 2/2 arm64: simplify ptrauth initialization

In reply to Mark Rutland

Currently __cpu_setup conditionally initializes the address authentication keys and enables them in SCTLR_EL1, doing so differently for the primary CPU and secondary CPUs, and skipping this work for CPUs returning from an idle state. For the latter case, cpu_do_resume restores the keys and SCTLR_EL1 value after the MMU has been enabled.

This flow is rather difficult to follow, so instead let's move the primary and secondary CPU initialization into their respective boot paths. By following the example of cpu_do_resume and doing so once the MMU is enabled, we can always initialize the keys from the values in thread_struct, and avoid the machinery necessary to pass the keys in secondary_data or open-coding initialization for the boot CPU.

This means we perform an additional RMW of SCTLR_EL1, but we already do this in the cpu_do_resume path, and for other features in cpufeature.c, so this isn't a major concern in a bringup path. Note that even while the enable bits are clear, the key registers are accessible.

As this now renders the argument to __cpu_setup redundant, let's also remove that entirely. Future extensions can follow a similar approach to initialize values that differ for primary/secondary CPUs.

Cc Amit Daniel Kachhap <[email protected]>
Cc Catalin Marinas <[email protected]>
Cc James Morse <[email protected]>
Cc Suzuki K Poulose <[email protected]>
Cc Will Deacon <[email protected]>
---
 arch/arm64/include/asm/asm_pointer_auth.h | 22 ++++++++++++++++
 arch/arm64/include/asm/smp.h              | 11 --------
 arch/arm64/kernel/asm-offsets.c           |  3 ---
 arch/arm64/kernel/head.S                  | 12 +++++++--
 arch/arm64/kernel/sleep.S                 |  1 -
 arch/arm64/kernel/smp.c                   |  8 ------
 arch/arm64/mm/proc.S                      | 44 -------------------------------
 7 files changed, 32 insertions(+), 69 deletions(-)
arch/arm64/include/asm/asm_pointer_auth.h +22 -0
index c85540a911d3..52dead2a8640 100644
@@ -60,6 +60,28 @@ alternative_if ARM64_HAS_ADDRESS_AUTH
 alternative_else_nop_endif
 	.endm
 
+	.macro __ptrauth_keys_init_cpu tsk, tmp1, tmp2, tmp3
+	mrs	\tmp1, id_aa64isar1_el1
+	ubfx	\tmp1, \tmp1, #ID_AA64ISAR1_APA_SHIFT, #8
+	cbz	\tmp1, .Lno_addr_auth\@
+	mov_q	\tmp1, (SCTLR_ELx_ENIA | SCTLR_ELx_ENIB | \
+			SCTLR_ELx_ENDA | SCTLR_ELx_ENDB)
+	mrs	\tmp2, sctlr_el1
+	orr	\tmp2, \tmp2, \tmp1
+	msr	sctlr_el1, \tmp2
+	__ptrauth_keys_install_kernel_nosync \tsk, \tmp1, \tmp2, \tmp3
+	isb
+.Lno_addr_auth\@:
+	.endm
+
+	.macro ptrauth_keys_init_cpu tsk, tmp1, tmp2, tmp3
+alternative_if_not ARM64_HAS_ADDRESS_AUTH
+	b	.Lno_addr_auth\@
+alternative_else_nop_endif
+	__ptrauth_keys_init_cpu \tsk, \tmp1, \tmp2, \tmp3
+.Lno_addr_auth\@:
+	.endm
+
 #else /* CONFIG_ARM64_PTR_AUTH */
 
 	.macro ptrauth_keys_install_user tsk, tmp1, tmp2, tmp3
arch/arm64/include/asm/smp.h +0 -11
index 40d5ba029615..ea268d88b6f7 100644
@@ -23,14 +23,6 @@
 #define CPU_STUCK_REASON_52_BIT_VA	(UL(1) << CPU_STUCK_REASON_SHIFT)
 #define CPU_STUCK_REASON_NO_GRAN	(UL(2) << CPU_STUCK_REASON_SHIFT)
 
-/* Possible options for __cpu_setup */
-/* Option to setup primary cpu */
-#define ARM64_CPU_BOOT_PRIMARY		(1)
-/* Option to setup secondary cpus */
-#define ARM64_CPU_BOOT_SECONDARY	(2)
-/* Option to setup cpus for different cpu run time services */
-#define ARM64_CPU_RUNTIME		(3)
-
 #ifndef __ASSEMBLY__
 
 #include <asm/percpu.h>
@@ -96,9 +88,6 @@ asmlinkage void secondary_start_kernel(void);
 struct secondary_data {
 	void *stack;
 	struct task_struct *task;
-#ifdef CONFIG_ARM64_PTR_AUTH
-	struct ptrauth_keys_kernel ptrauth_key;
-#endif
 	long status;
 };
 
arch/arm64/kernel/asm-offsets.c +0 -3
index 9981a0a5a87f..890ddd67b8bf 100644
@@ -92,9 +92,6 @@ int main(void)
   BLANK();
   DEFINE(CPU_BOOT_STACK,	offsetof(struct secondary_data, stack));
   DEFINE(CPU_BOOT_TASK,		offsetof(struct secondary_data, task));
-#ifdef CONFIG_ARM64_PTR_AUTH
-  DEFINE(CPU_BOOT_PTRAUTH_KEY,	offsetof(struct secondary_data, ptrauth_key));
-#endif
   BLANK();
 #ifdef CONFIG_KVM_ARM_HOST
   DEFINE(VCPU_CONTEXT,		offsetof(struct kvm_vcpu, arch.ctxt));
arch/arm64/kernel/head.S +10 -2
index 57a91032b4c2..dc2b441d4ed8 100644
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/irqchip/arm-gic-v3.h>
 
+#include <asm/asm_pointer_auth.h>
 #include <asm/assembler.h>
 #include <asm/boot.h>
 #include <asm/ptrace.h>
@@ -118,7 +119,6 @@ SYM_CODE_START(stext)
 	 * On return, the CPU will be ready for the MMU to be turned on and
 	 * the TCR will have been set.
 	 */
-	mov	x0, #ARM64_CPU_BOOT_PRIMARY
 	bl	__cpu_setup			// initialise processor
 	b	__primary_switch
 SYM_CODE_END(stext)
@@ -417,6 +417,10 @@ SYM_FUNC_START_LOCAL(__primary_switched)
 	adr_l	x5, init_task
 	msr	sp_el0, x5			// Save thread_info
 
+#ifdef CONFIG_ARM64_PTR_AUTH
+	__ptrauth_keys_init_cpu	x5, x6, x7, x8
+#endif
+
 	adr_l	x8, vectors			// load VBAR_EL1 with virtual
 	msr	vbar_el1, x8			// vector table address
 	isb
@@ -717,7 +721,6 @@ SYM_FUNC_START_LOCAL(secondary_startup)
 	 * Common entry point for secondary CPUs.
 	 */
 	bl	__cpu_secondary_check52bitva
-	mov	x0, #ARM64_CPU_BOOT_SECONDARY
 	bl	__cpu_setup			// initialise processor
 	adrp	x1, swapper_pg_dir
 	bl	__enable_mmu
@@ -739,6 +742,11 @@ SYM_FUNC_START_LOCAL(__secondary_switched)
 	msr	sp_el0, x2
 	mov	x29, #0
 	mov	x30, #0
+
+#ifdef CONFIG_ARM64_PTR_AUTH
+	ptrauth_keys_init_cpu x2, x3, x4, x5
+#endif
+
 	b	secondary_start_kernel
 SYM_FUNC_END(__secondary_switched)
 
arch/arm64/kernel/sleep.S +0 -1
index 7b2f2e650c44..56b1fe9bfaa0 100644
@@ -100,7 +100,6 @@ ENDPROC(__cpu_suspend_enter)
 	.pushsection ".idmap.text", "awx"
 ENTRY(cpu_resume)
 	bl	el2_setup		// if in EL2 drop to EL1 cleanly
-	mov	x0, #ARM64_CPU_RUNTIME
 	bl	__cpu_setup
 	/* enable the MMU early - so we can access sleep_save_stash by va */
 	adrp	x1, swapper_pg_dir
arch/arm64/kernel/smp.c +0 -8
index 061f60fe452f..d6d337d036f0 100644
@@ -114,10 +114,6 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 	 */
 	secondary_data.task = idle;
 	secondary_data.stack = task_stack_page(idle) + THREAD_SIZE;
-#if defined(CONFIG_ARM64_PTR_AUTH)
-	secondary_data.ptrauth_key.apia.lo = idle->thread.keys_kernel.apia.lo;
-	secondary_data.ptrauth_key.apia.hi = idle->thread.keys_kernel.apia.hi;
-#endif
 	update_cpu_boot_status(CPU_MMU_OFF);
 	__flush_dcache_area(&secondary_data, sizeof(secondary_data));
 
@@ -140,10 +136,6 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 	pr_crit("CPU%u: failed to come online\n", cpu);
 	secondary_data.task = NULL;
 	secondary_data.stack = NULL;
-#if defined(CONFIG_ARM64_PTR_AUTH)
-	secondary_data.ptrauth_key.apia.lo = 0;
-	secondary_data.ptrauth_key.apia.hi = 0;
-#endif
 	__flush_dcache_area(&secondary_data, sizeof(secondary_data));
 	status = READ_ONCE(secondary_data.status);
 	if (status == CPU_MMU_OFF)
arch/arm64/mm/proc.S +0 -44

59 lines not on this page · raw message

Signature · 7 lines
2.11.0


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Tested-by Reviewed-by on v1 2/2
#3 lore raw

Re: [PATCH 2/2] arm64: simplify ptrauth initialization

Hi,

Quoted 22 lines · Mark Rutland

Currently __cpu_setup conditionally initializes the address authentication keys and enables them in SCTLR_EL1, doing so differently for the primary CPU and secondary CPUs, and skipping this work for CPUs returning from an idle state. For the latter case, cpu_do_resume restores the keys and SCTLR_EL1 value after the MMU has been enabled.

This flow is rather difficult to follow, so instead let's move the primary and secondary CPU initialization into their respective boot paths. By following the example of cpu_do_resume and doing so once the MMU is enabled, we can always initialize the keys from the values in thread_struct, and avoid the machinery necessary to pass the keys in secondary_data or open-coding initialization for the boot CPU.

This means we perform an additional RMW of SCTLR_EL1, but we already do this in the cpu_do_resume path, and for other features in cpufeature.c, so this isn't a major concern in a bringup path. Note that even while the enable bits are clear, the key registers are accessible.

As this now renders the argument to __cpu_setup redundant, let's also remove that entirely. Future extensions can follow a similar approach to initialize values that differ for primary/secondary CPUs.

Quoted 6 lines
Cc Amit Daniel Kachhap <[email protected]>
Cc Catalin Marinas <[email protected]>
Cc James Morse <[email protected]>
Cc Suzuki K Poulose <[email protected]>
Cc Will Deacon <[email protected]>

The code changes look good. I couldn't find any problem while testing it.

Thanks,
Amit

Quoted 231 lines
---
  arch/arm64/include/asm/asm_pointer_auth.h | 22 ++++++++++++++++
  arch/arm64/include/asm/smp.h              | 11 --------
  arch/arm64/kernel/asm-offsets.c           |  3 ---
  arch/arm64/kernel/head.S                  | 12 +++++++--
  arch/arm64/kernel/sleep.S                 |  1 -
  arch/arm64/kernel/smp.c                   |  8 ------
  arch/arm64/mm/proc.S                      | 44 -------------------------------
  7 files changed, 32 insertions(+), 69 deletions(-)
arch/arm64/include/asm/asm_pointer_auth.h +22 -0
index c85540a911d3..52dead2a8640 100644
@@ -60,6 +60,28 @@ alternative_if ARM64_HAS_ADDRESS_AUTH
  alternative_else_nop_endif
  	.endm
 
+	.macro __ptrauth_keys_init_cpu tsk, tmp1, tmp2, tmp3
+	mrs	\tmp1, id_aa64isar1_el1
+	ubfx	\tmp1, \tmp1, #ID_AA64ISAR1_APA_SHIFT, #8
+	cbz	\tmp1, .Lno_addr_auth\@
+	mov_q	\tmp1, (SCTLR_ELx_ENIA | SCTLR_ELx_ENIB | \
+			SCTLR_ELx_ENDA | SCTLR_ELx_ENDB)
+	mrs	\tmp2, sctlr_el1
+	orr	\tmp2, \tmp2, \tmp1
+	msr	sctlr_el1, \tmp2
+	__ptrauth_keys_install_kernel_nosync \tsk, \tmp1, \tmp2, \tmp3
+	isb
+.Lno_addr_auth\@:
+	.endm
+
+	.macro ptrauth_keys_init_cpu tsk, tmp1, tmp2, tmp3
+alternative_if_not ARM64_HAS_ADDRESS_AUTH
+	b	.Lno_addr_auth\@
+alternative_else_nop_endif
+	__ptrauth_keys_init_cpu \tsk, \tmp1, \tmp2, \tmp3
+.Lno_addr_auth\@:
+	.endm
+
  #else /* CONFIG_ARM64_PTR_AUTH */
 
  	.macro ptrauth_keys_install_user tsk, tmp1, tmp2, tmp3
arch/arm64/include/asm/smp.h +0 -11
index 40d5ba029615..ea268d88b6f7 100644
@@ -23,14 +23,6 @@
  #define CPU_STUCK_REASON_52_BIT_VA	(UL(1) << CPU_STUCK_REASON_SHIFT)
  #define CPU_STUCK_REASON_NO_GRAN	(UL(2) << CPU_STUCK_REASON_SHIFT)
 
-/* Possible options for __cpu_setup */
-/* Option to setup primary cpu */
-#define ARM64_CPU_BOOT_PRIMARY		(1)
-/* Option to setup secondary cpus */
-#define ARM64_CPU_BOOT_SECONDARY	(2)
-/* Option to setup cpus for different cpu run time services */
-#define ARM64_CPU_RUNTIME		(3)
-
  #ifndef __ASSEMBLY__
 
  #include <asm/percpu.h>
@@ -96,9 +88,6 @@ asmlinkage void secondary_start_kernel(void);
  struct secondary_data {
  	void *stack;
  	struct task_struct *task;
-#ifdef CONFIG_ARM64_PTR_AUTH
-	struct ptrauth_keys_kernel ptrauth_key;
-#endif
  	long status;
  };
 
arch/arm64/kernel/asm-offsets.c +0 -3
index 9981a0a5a87f..890ddd67b8bf 100644
@@ -92,9 +92,6 @@ int main(void)
    BLANK();
    DEFINE(CPU_BOOT_STACK,	offsetof(struct secondary_data, stack));
    DEFINE(CPU_BOOT_TASK,		offsetof(struct secondary_data, task));
-#ifdef CONFIG_ARM64_PTR_AUTH
-  DEFINE(CPU_BOOT_PTRAUTH_KEY,	offsetof(struct secondary_data, ptrauth_key));
-#endif
    BLANK();
  #ifdef CONFIG_KVM_ARM_HOST
    DEFINE(VCPU_CONTEXT,		offsetof(struct kvm_vcpu, arch.ctxt));
arch/arm64/kernel/head.S +10 -2
index 57a91032b4c2..dc2b441d4ed8 100644
@@ -13,6 +13,7 @@
  #include <linux/init.h>
  #include <linux/irqchip/arm-gic-v3.h>
 
+#include <asm/asm_pointer_auth.h>
  #include <asm/assembler.h>
  #include <asm/boot.h>
  #include <asm/ptrace.h>
@@ -118,7 +119,6 @@ SYM_CODE_START(stext)
  	 * On return, the CPU will be ready for the MMU to be turned on and
  	 * the TCR will have been set.
  	 */
-	mov	x0, #ARM64_CPU_BOOT_PRIMARY
  	bl	__cpu_setup			// initialise processor
  	b	__primary_switch
  SYM_CODE_END(stext)
@@ -417,6 +417,10 @@ SYM_FUNC_START_LOCAL(__primary_switched)
  	adr_l	x5, init_task
  	msr	sp_el0, x5			// Save thread_info
 
+#ifdef CONFIG_ARM64_PTR_AUTH
+	__ptrauth_keys_init_cpu	x5, x6, x7, x8
+#endif
+
  	adr_l	x8, vectors			// load VBAR_EL1 with virtual
  	msr	vbar_el1, x8			// vector table address
  	isb
@@ -717,7 +721,6 @@ SYM_FUNC_START_LOCAL(secondary_startup)
  	 * Common entry point for secondary CPUs.
  	 */
  	bl	__cpu_secondary_check52bitva
-	mov	x0, #ARM64_CPU_BOOT_SECONDARY
  	bl	__cpu_setup			// initialise processor
  	adrp	x1, swapper_pg_dir
  	bl	__enable_mmu
@@ -739,6 +742,11 @@ SYM_FUNC_START_LOCAL(__secondary_switched)
  	msr	sp_el0, x2
  	mov	x29, #0
  	mov	x30, #0
+
+#ifdef CONFIG_ARM64_PTR_AUTH
+	ptrauth_keys_init_cpu x2, x3, x4, x5
+#endif
+
  	b	secondary_start_kernel
  SYM_FUNC_END(__secondary_switched)
 
arch/arm64/kernel/sleep.S +0 -1
index 7b2f2e650c44..56b1fe9bfaa0 100644
@@ -100,7 +100,6 @@ ENDPROC(__cpu_suspend_enter)
  	.pushsection ".idmap.text", "awx"
  ENTRY(cpu_resume)
  	bl	el2_setup		// if in EL2 drop to EL1 cleanly
-	mov	x0, #ARM64_CPU_RUNTIME
  	bl	__cpu_setup
  	/* enable the MMU early - so we can access sleep_save_stash by va */
  	adrp	x1, swapper_pg_dir
arch/arm64/kernel/smp.c +0 -8
index 061f60fe452f..d6d337d036f0 100644
@@ -114,10 +114,6 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
  	 */
  	secondary_data.task = idle;
  	secondary_data.stack = task_stack_page(idle) + THREAD_SIZE;
-#if defined(CONFIG_ARM64_PTR_AUTH)
-	secondary_data.ptrauth_key.apia.lo = idle->thread.keys_kernel.apia.lo;
-	secondary_data.ptrauth_key.apia.hi = idle->thread.keys_kernel.apia.hi;
-#endif
  	update_cpu_boot_status(CPU_MMU_OFF);
  	__flush_dcache_area(&secondary_data, sizeof(secondary_data));
 
@@ -140,10 +136,6 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
  	pr_crit("CPU%u: failed to come online\n", cpu);
  	secondary_data.task = NULL;
  	secondary_data.stack = NULL;
-#if defined(CONFIG_ARM64_PTR_AUTH)
-	secondary_data.ptrauth_key.apia.lo = 0;
-	secondary_data.ptrauth_key.apia.hi = 0;
-#endif
  	__flush_dcache_area(&secondary_data, sizeof(secondary_data));
  	status = READ_ONCE(secondary_data.status);
  	if (status == CPU_MMU_OFF)
arch/arm64/mm/proc.S +0 -36
index 0401342741e6..7d3bf1afba0c 100644
@@ -386,8 +386,6 @@ SYM_FUNC_END(idmap_kpti_install_ng_mappings)
   *
   *	Initialise the processor for turning the MMU on.
   *
- * Input:
- *	x0 with a flag ARM64_CPU_BOOT_PRIMARY/ARM64_CPU_BOOT_SECONDARY/ARM64_CPU_RUNTIME.
   * Output:
   *	Return in x0 the value of the SCTLR_EL1 register.
   */
@@ -446,51 +444,9 @@ SYM_FUNC_START(__cpu_setup)
  1:
  #endif	/* CONFIG_ARM64_HW_AFDBM */
  	msr	tcr_el1, x10
-	mov	x1, x0
  	/*
  	 * Prepare SCTLR
  	 */
  	mov_q	x0, SCTLR_EL1_SET
-
-#ifdef CONFIG_ARM64_PTR_AUTH
-	/* No ptrauth setup for run time cpus */
-	cmp	x1, #ARM64_CPU_RUNTIME
-	b.eq	3f
-
-	/* Check if the CPU supports ptrauth */
-	mrs	x2, id_aa64isar1_el1
-	ubfx	x2, x2, #ID_AA64ISAR1_APA_SHIFT, #8
-	cbz	x2, 3f
-
-	/*
-	 * The primary cpu keys are reset here and can be
-	 * re-initialised with some proper values later.
-	 */
-	msr_s	SYS_APIAKEYLO_EL1, xzr
-	msr_s	SYS_APIAKEYHI_EL1, xzr
-
-	/* Just enable ptrauth for primary cpu */
-	cmp	x1, #ARM64_CPU_BOOT_PRIMARY
-	b.eq	2f
-
-	/* if !system_supports_address_auth() then skip enable */
-alternative_if_not ARM64_HAS_ADDRESS_AUTH
-	b	3f
-alternative_else_nop_endif
-
-	/* Install ptrauth key for secondary cpus */
-	adr_l	x2, secondary_data
-	ldr	x3, [x2, #CPU_BOOT_TASK]	// get secondary_data.task
-	cbz	x3, 2f				// check for slow booting cpus
-	ldp	x3, x4, [x2, #CPU_BOOT_PTRAUTH_KEY]
-	msr_s	SYS_APIAKEYLO_EL1, x3

arch/arm64/mm/proc.S SYM_FUNC_START(__cpu_setup) · line 452

Quoted 10 lines
arch/arm64/mm/proc.S +0 -8
-	msr_s	SYS_APIAKEYHI_EL1, x4
-
-2:	/* Enable ptrauth instructions */
-	ldr	x2, =SCTLR_ELx_ENIA | SCTLR_ELx_ENIB | \
-		     SCTLR_ELx_ENDA | SCTLR_ELx_ENDB
-	orr	x0, x0, x2
-3:
-#endif
  	ret					// return to head.S
  SYM_FUNC_END(__cpu_setup)

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

author reviewer
#4 lore raw

Re: [PATCH 2/2] arm64: simplify ptrauth initialization

Quoted 32 lines · Amit Kachhap

Hi,

Quoted 22 lines · Mark Rutland

Currently __cpu_setup conditionally initializes the address authentication keys and enables them in SCTLR_EL1, doing so differently for the primary CPU and secondary CPUs, and skipping this work for CPUs returning from an idle state. For the latter case, cpu_do_resume restores the keys and SCTLR_EL1 value after the MMU has been enabled.

This flow is rather difficult to follow, so instead let's move the primary and secondary CPU initialization into their respective boot paths. By following the example of cpu_do_resume and doing so once the MMU is enabled, we can always initialize the keys from the values in thread_struct, and avoid the machinery necessary to pass the keys in secondary_data or open-coding initialization for the boot CPU.

This means we perform an additional RMW of SCTLR_EL1, but we already do this in the cpu_do_resume path, and for other features in cpufeature.c, so this isn't a major concern in a bringup path. Note that even while the enable bits are clear, the key registers are accessible.

As this now renders the argument to __cpu_setup redundant, let's also remove that entirely. Future extensions can follow a similar approach to initialize values that differ for primary/secondary CPUs.

Quoted 6 lines
Cc Amit Daniel Kachhap <[email protected]>
Cc Catalin Marinas <[email protected]>
Cc James Morse <[email protected]>
Cc Suzuki K Poulose <[email protected]>
Cc Will Deacon <[email protected]>
Quoted 4 lines

The code changes look good. I couldn't find any problem while testing it.

Thanks; that's much appreciated!

Mark.

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

maintainer Applied
#5 lore raw
In reply to Mark Rutland
Quoted 10 lines · Mark Rutland

These patches refactor the pointer authentication initialization code to make it easier to reason about and to reduce duplication of code.

The big wins are:

* Moving the initialization after the MMU has been enabled. This means we can initialize the keys using the same helpers as context switch, and don't need to temporarily duplicate them in secondary_data.

[...]

Applied to arm64 (for-next/ptr-auth), thanks!

[1/2] arm64: remove ptrauth_keys_install_kernel sync arg

      https://git.kernel.org/arm64/c/d0055da5266a
[2/2] arm64: simplify ptrauth initialization
      https://git.kernel.org/arm64/c/62a679cb2825

Cheers,

Signature · 9 lines
Will

https://fixes.arm64.dev
https://next.arm64.dev

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel