ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entries
Subsystems (3)
Fabio Estevam
reviewerPATCH 1/1 ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entries
The I2C2 pins are already used and the following errors are seen:
imx27-pinctrl 10015000.iomuxc: pin MX27_PAD_I2C2_SDA already requested by 10012000.i2c; cannot claim for 1001d000.i2c imx27-pinctrl 10015000.iomuxc: pin-69 (1001d000.i2c) status -22
imx27-pinctrl 10015000.iomuxc: could not request pin 69 (MX27_PAD_I2C2_SDA) from group i2c2grp on device 10015000.iomuxc imx-i2c 1001d000.i2c: Error applying setting, reverse things back
imx-i2c: probe of 1001d000.i2c failed with error -22
Fix it by adding the correct I2C1 IOMUX entries for the pinctrl_i2c1 group.
--- arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +2 -2
@@ -75,8 +75,8 @@ imx27-phycard-s-rdk { pinctrl_i2c1: i2c1grp { fsl,pins = < - MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 - MX27_PAD_I2C2_SCL__I2C2_SCL 0x0 + MX27_PAD_I2C_DATA__I2C_DATA 0x0 + MX27_PAD_I2C_CLK__I2C_CLK 0x0 >; };
Signature · 1 line
2.17.1
Antwort: [PATCH] ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entries
Hi Fabio,
-----Fabio Estevam <[email protected]> schrieb: -----
Quoted 36 lines
An: [email protected]
Von: Fabio Estevam <[email protected]>
Datum: 27.03.2020 14:36
Kopie: [email protected], [email protected], [email protected], [email protected], Fabio Estevam <[email protected]>, [email protected]
Betreff: [PATCH] ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entriesThe I2C2 pins are already used and the following errors are seen:
imx27-pinctrl 10015000.iomuxc: pin
MX27_PAD_I2C2_SDAalready requested by 10012000.i2c; cannot claim for 1001d000.i2c imx27-pinctrl 10015000.iomuxc: pin-69 (1001d000.i2c) status -22 imx27-pinctrl 10015000.iomuxc: could not request pin 69 (MX27_PAD_I2C2_SDA) from group i2c2grp on device 10015000.iomuxc imx-i2c 1001d000.i2c: Error applying setting, reverse things back
imx-i2c: probe of 1001d000.i2c failed with error -22Fix it by adding the correct I2C1 IOMUX entries for the
pinctrl_i2c1group.Cc <[email protected]>Fixes 61664d0b432a ("ARM: dts: imx27 phyCARD-S pinctrl")Signed-off-by Fabio Estevam <[email protected]>---
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts| 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +0
-0@@ -75,8 +75,8 @@ imx27-phycard-s-rdk {
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
Quoted 10 lines
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +2
-3pinctrl_i2c1: i2c1grp { fsl,pins = < - MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 - MX27_PAD_I2C2_SCL__I2C2_SCL 0x0 + MX27_PAD_I2C_DATA__I2C_DATA 0x0 + MX27_PAD_I2C_CLK__I2C_CLK 0x0 >; }; --
Quoted 3 lines
2.17.1
Shawn Guo
AppliedQuoted 8 lines · Fabio Estevam
The I2C2 pins are already used and the following errors are seen:
imx27-pinctrl 10015000.iomuxc: pin
MX27_PAD_I2C2_SDAalready requested by 10012000.i2c; cannot claim for 1001d000.i2c imx27-pinctrl 10015000.iomuxc: pin-69 (1001d000.i2c) status -22
imx27-pinctrl 10015000.iomuxc: could not request pin 69 (MX27_PAD_I2C2_SDA) from group i2c2grp on device 10015000.iomuxc imx-i2c 1001d000.i2c: Error applying setting, reverse things back
imx-i2c: probe of 1001d000.i2c failed with error -22
Quoted 5 lines
Fix it by adding the correct I2C1 IOMUX entries for the
pinctrl_i2c1group.Cc <[email protected]>Fixes 61664d0b432a ("ARM: dts: imx27 phyCARD-S pinctrl")Signed-off-by Fabio Estevam <[email protected]>
Applied, thanks.