tests/kms_multipipe_modeset: Add test to validate max pipe configuration

Added test to validate max pipe configuration for a platform. In the test, the reference CRC is collected first by doing modeset on all the outputs individually.Then a simultaneous modeset is done on all the outputs and the CRC is collected. This is compared with the reference CRC.

If the number of outputs connected is less than the number of pipes supported by the platform, then the test skips.

This test is added to verify if the max pipe configuration for a given platform is working fine. Even though there are other tests which test multipipe configuration, they test some other functionalities as well together with multipipe. This is a stand alone test that intends to only verify simultaneous modeset at the max pipe configuration.

v2: -Fix Typo in comment (Petri)
-Use igt_require_pipe_crc() to prevent crash in non i915 case (Petri) -Print the number of outputs and pipes in igt_require() for
debugging aid (Petri)

Signed-off-by Karthik B S <[email protected]>

---
 tests/Makefile.sources        |   1 +
 tests/kms_multipipe_modeset.c | 181 ++++++++++++++++++++++++++++++++++
 tests/meson.build             |   1 +
 3 files changed, 183 insertions(+)
 create mode 100644 tests/kms_multipipe_modeset.c

tests/Makefile.sources +1 -0

index 32cbbf4f..c450fa0e 100644
@@ -61,6 +61,7 @@ TESTS_progs = \
 	kms_lease \
 	kms_legacy_colorkey \
 	kms_mmap_write_crc \
+	kms_multipipe_modeset \
 	kms_panel_fitting \
 	kms_pipe_b_c_ivb \
 	kms_pipe_crc_basic \

tests/kms_multipipe_modeset.c new file +158 -0

new file mode 100644
index 00000000..e1d292ee
@@ -0,0 +1,181 @@
+/*
+ * Copyright © 2020 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Author:
+ *  Karthik B S <[email protected]>
+ */
+
+#include "igt.h"
+
+IGT_TEST_DESCRIPTION("Test simultaneous modeset on all the supported pipes");
+
+typedef struct {
+	int drm_fd;
+	igt_display_t display;
+	struct igt_fb fb;
+} data_t;
+
+static void run_test(data_t *data, int valid_outputs)
+{
+	igt_output_t *output;
+	igt_pipe_crc_t *pipe_crcs[IGT_MAX_PIPES] = { 0 };
+	igt_crc_t ref_crcs[IGT_MAX_PIPES], new_crcs[IGT_MAX_PIPES];
+	igt_display_t *display = &data->display;
+	int width = 0, height = 0, i, count = 0;
+	int output_to_pipe[valid_outputs];
+	igt_pipe_t *pipe;
+	igt_plane_t *plane;
+	drmModeModeInfo *mode;
+
+	for_each_connected_output(display, output) {
+		mode = igt_output_get_mode(output);
+		igt_assert(mode);
+
+		igt_output_set_pipe(output, PIPE_NONE);
+
+		width = max(width, mode->hdisplay);
+		height = max(height, mode->vdisplay);
+	}
+
+	igt_create_pattern_fb(data->drm_fd, width, height, DRM_FORMAT_XRGB8888,
+			      LOCAL_DRM_FORMAT_MOD_NONE, &data->fb);
+
+	/* Make pipe-output mapping which will be used unchanged across the test */
+	for_each_pipe(display, i) {
+		count = 0;
+		for_each_connected_output(display, output) {
+			if (igt_pipe_connector_valid(i, output) &&
+			    output->pending_pipe == PIPE_NONE) {
+				igt_output_set_pipe(output, i);
+				output_to_pipe[count] = i;
+				break;
+			}
+			count++;
+		}
+	}
+
+	/* Collect reference CRC by Committing individually on all outputs*/
+	for_each_pipe(display, i) {
+		pipe = &display->pipes[i];
+		plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+
+		mode = NULL;
+
+		pipe_crcs[i] = igt_pipe_crc_new(display->drm_fd, i,
+						INTEL_PIPE_CRC_SOURCE_AUTO);
+
+		count = 0;
+		for_each_connected_output(display, output) {
+			if (output_to_pipe[count] == pipe->pipe) {
+				igt_output_set_pipe(output, i);
+				mode = igt_output_get_mode(output);
+				igt_assert(mode);
+			} else
+				igt_output_set_pipe(output, PIPE_NONE);
+			count++;
+		}
+
+		igt_plane_set_fb(plane, &data->fb);
+		igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+		igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+
+		igt_display_commit2(display, COMMIT_ATOMIC);
+		igt_pipe_crc_collect_crc(pipe_crcs[i], &ref_crcs[i]);
+	}
+
+	/* Simultaneously commit on all outputs */
+	for_each_pipe(display, i) {
+		pipe = &display->pipes[i];
+		plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+
+		mode = NULL;
+
+		count = 0;
+		for_each_connected_output(display, output) {
+			if (output_to_pipe[count] == pipe->pipe) {
+				igt_output_set_pipe(output, i);
+				mode = igt_output_get_mode(output);
+				igt_assert(mode);
+				break;
+			}
+			count++;
+		}
+
+		igt_plane_set_fb(plane, &data->fb);
+		igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+		igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+	}
+
+	igt_display_commit2(display, COMMIT_ATOMIC);
+
+	/* CRC Verification */
+	for (count = 0; count < valid_outputs; count++) {
+		igt_pipe_crc_collect_crc(pipe_crcs[count], &new_crcs[count]);
+		igt_assert_crc_equal(&ref_crcs[count], &new_crcs[count]);
+	}
+
+	igt_plane_set_fb(plane, NULL);
+	igt_remove_fb(data->drm_fd, &data->fb);
+}
+
+static void test_multipipe(data_t *data)
+{
+	igt_output_t *output;
+	int valid_outputs = 0, num_pipes;
+
+	num_pipes = igt_display_get_n_pipes(&data->display);
+	for_each_connected_output(&data->display, output)
+		valid_outputs++;
+
+	igt_require_f(valid_outputs == num_pipes,
+		      "Number of connected outputs(%d) not equal to the "
+		      "number of pipes supported(%d)\n", valid_outputs, num_pipes);
+
+	run_test(data, valid_outputs);
+}
+
+igt_main
+{
+	data_t data;

tests/kms_multipipe_modeset.c new file +4 -0

+
+	igt_fixture
+		igt_display_fini(&data.display);
+}

tests/meson.build +1 -0

index 0bdcfbe4..88e4875b 100644
@@ -45,6 +45,7 @@ test_progs = [
 	'kms_lease',
 	'kms_legacy_colorkey',
 	'kms_mmap_write_crc',
+	'kms_multipipe_modeset',
 	'kms_panel_fitting',
 	'kms_pipe_b_c_ivb',
 	'kms_pipe_crc_basic',

Signature · 1 line

2.22.0

Quoted 204 lines · Karthik B S

Added test to validate max pipe configuration for a platform. In the test, the reference CRC is collected first by doing modeset on all the outputs individually.Then a simultaneous modeset is done on all the outputs and the CRC is collected. This is compared with the reference CRC.

If the number of outputs connected is less than the number of pipes supported by the platform, then the test skips.

This test is added to verify if the max pipe configuration for a given platform is working fine. Even though there are other tests which test multipipe configuration, they test some other functionalities as well together with multipipe. This is a stand alone test that intends to only verify simultaneous modeset at the max pipe configuration.

v2: -Fix Typo in comment (Petri)
-Use igt_require_pipe_crc() to prevent crash in non i915 case (Petri) -Print the number of outputs and pipes in igt_require() for
debugging aid (Petri)

Signed-off-by Karthik B S <[email protected]>

---
  tests/Makefile.sources        |   1 +
  tests/kms_multipipe_modeset.c | 181 ++++++++++++++++++++++++++++++++++
  tests/meson.build             |   1 +
  3 files changed, 183 insertions(+)

create mode 100644 tests/kms_multipipe_modeset.c

tests/Makefile.sources +1 -0

index 32cbbf4f..c450fa0e 100644
@@ -61,6 +61,7 @@ TESTS_progs = \
  	kms_lease \
  	kms_legacy_colorkey \
  	kms_mmap_write_crc \
+	kms_multipipe_modeset \
  	kms_panel_fitting \
  	kms_pipe_b_c_ivb \
  	kms_pipe_crc_basic \

tests/kms_multipipe_modeset.c new file +158 -0

new file mode 100644
index 00000000..e1d292ee
@@ -0,0 +1,181 @@
+/*
+ * Copyright © 2020 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Author:
+ *  Karthik B S <[email protected]>
+ */
+
+#include "igt.h"
+
+IGT_TEST_DESCRIPTION("Test simultaneous modeset on all the supported pipes");
+
+typedef struct {
+	int drm_fd;
+	igt_display_t display;
+	struct igt_fb fb;
+} data_t;
+
+static void run_test(data_t *data, int valid_outputs)
+{
+	igt_output_t *output;
+	igt_pipe_crc_t *pipe_crcs[IGT_MAX_PIPES] = { 0 };
+	igt_crc_t ref_crcs[IGT_MAX_PIPES], new_crcs[IGT_MAX_PIPES];
+	igt_display_t *display = &data->display;
+	int width = 0, height = 0, i, count = 0;
+	int output_to_pipe[valid_outputs];
+	igt_pipe_t *pipe;
+	igt_plane_t *plane;
+	drmModeModeInfo *mode;
+
+	for_each_connected_output(display, output) {
+		mode = igt_output_get_mode(output);
+		igt_assert(mode);
+
+		igt_output_set_pipe(output, PIPE_NONE);
+
+		width = max(width, mode->hdisplay);
+		height = max(height, mode->vdisplay);
+	}
+
+	igt_create_pattern_fb(data->drm_fd, width, height, DRM_FORMAT_XRGB8888,
+			      LOCAL_DRM_FORMAT_MOD_NONE, &data->fb);
+
+	/* Make pipe-output mapping which will be used unchanged across the test */
+	for_each_pipe(display, i) {
+		count = 0;
+		for_each_connected_output(display, output) {
+			if (igt_pipe_connector_valid(i, output) &&
+			    output->pending_pipe == PIPE_NONE) {
+				igt_output_set_pipe(output, i);
+				output_to_pipe[count] = i;
+				break;
+			}
+			count++;
+		}
+	}
+
+	/* Collect reference CRC by Committing individually on all outputs*/
+	for_each_pipe(display, i) {
+		pipe = &display->pipes[i];
+		plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+
+		mode = NULL;
+
+		pipe_crcs[i] = igt_pipe_crc_new(display->drm_fd, i,
+						INTEL_PIPE_CRC_SOURCE_AUTO);
+
+		count = 0;
+		for_each_connected_output(display, output) {
+			if (output_to_pipe[count] == pipe->pipe) {
+				igt_output_set_pipe(output, i);
+				mode = igt_output_get_mode(output);
+				igt_assert(mode);
+			} else
+				igt_output_set_pipe(output, PIPE_NONE);
+			count++;
+		}
+
+		igt_plane_set_fb(plane, &data->fb);
+		igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+		igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+
+		igt_display_commit2(display, COMMIT_ATOMIC);
+		igt_pipe_crc_collect_crc(pipe_crcs[i], &ref_crcs[i]);
+	}
+
+	/* Simultaneously commit on all outputs */
+	for_each_pipe(display, i) {
+		pipe = &display->pipes[i];
+		plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+
+		mode = NULL;
+
+		count = 0;
+		for_each_connected_output(display, output) {
+			if (output_to_pipe[count] == pipe->pipe) {
+				igt_output_set_pipe(output, i);
+				mode = igt_output_get_mode(output);
+				igt_assert(mode);
+				break;
+			}
+			count++;
+		}
+
+		igt_plane_set_fb(plane, &data->fb);
+		igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+		igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+	}
+
+	igt_display_commit2(display, COMMIT_ATOMIC);
+
+	/* CRC Verification */
+	for (count = 0; count < valid_outputs; count++) {
+		igt_pipe_crc_collect_crc(pipe_crcs[count], &new_crcs[count]);
+		igt_assert_crc_equal(&ref_crcs[count], &new_crcs[count]);
+	}
+
+	igt_plane_set_fb(plane, NULL);
+	igt_remove_fb(data->drm_fd, &data->fb);
+}
+
+static void test_multipipe(data_t *data)
+{
+	igt_output_t *output;
+	int valid_outputs = 0, num_pipes;
+
+	num_pipes = igt_display_get_n_pipes(&data->display);
+	for_each_connected_output(&data->display, output)
+		valid_outputs++;
+
+	igt_require_f(valid_outputs == num_pipes,
+		      "Number of connected outputs(%d) not equal to the "
+		      "number of pipes supported(%d)\n", valid_outputs, num_pipes);
+
+	run_test(data, valid_outputs);
+}
+
+igt_main
+{
+	data_t data;

tests/kms_multipipe_modeset.c line 168

Quoted 10 lines

tests/kms_multipipe_modeset.c new file +10 -0

+	drmModeResPtr res;
+
+	igt_fixture {
+		data.drm_fd = drm_open_driver_master(DRIVER_ANY);
+		kmstest_set_vt_graphics_mode();
+
+		igt_require_pipe_crc(data.drm_fd);
+		igt_display_require(&data.display, data.drm_fd);
+
+		res = drmModeGetResources(data.drm_fd);

Hmm, assigning to a local variable in an igt_fixture... But it's not read outside it, this is fine.

tests/kms_multipipe_modeset.c line 177

Quoted 9 lines

tests/kms_multipipe_modeset.c new file +9 -0

+		igt_assert(res);
+
+		kmstest_unset_all_crtcs(data.drm_fd, res);
+	}
+
+	igt_describe("Verify if simultaneous modesets on all the supported "
+		     "pipes is successful. Validate using CRC verification");
+	igt_subtest("multipipe-modeset")
+		test_multipipe(&data);

This test binary is already called kms_multipipe_modeset, I wonder if we can find a better name for it, considering we might want to add more later.

"basic-crc-check" ?

Otherwise the patch LGTM.

Reviewed-by Petri Latvala <[email protected]>

Quoted 11 lines

tests/kms_multipipe_modeset.c new file +4 -0

+
+	igt_fixture
+		igt_display_fini(&data.display);
+}

tests/meson.build +0 -0

index 0bdcfbe4..88e4875b 100644
@@ -45,6 +45,7 @@ test_progs = [
  	'kms_lease',
  	'kms_legacy_colorkey',

Quoted 8 lines

tests/meson.build +1 -0

  	'kms_mmap_write_crc',
+	'kms_multipipe_modeset',
  	'kms_panel_fitting',
  	'kms_pipe_b_c_ivb',
  	'kms_pipe_crc_basic',

Signature · 1 line

2.22.0

Hi Karthik,

Thanks for the patch. Overall the patch looks good to me.

Only a small concern I have is that when the commit fails due to not sufficient bandwidth, due to perhaps, high resolution displays

connected. So it might be that the 'n' displays are supported, but perhaps not with the given resolutions.

The test in that case might fail due to "EINVAL".

Trying with try_commit by changing resolution is a solution but might be an overkill.

Perhaps trying with lowest mode would be better, if we just want to check if all pipes are coming up simultaneously.

Again this is just a specific scenario with high resolution displays connected, which the platform might not support.

Regards,

Ankit

Quoted 133 lines · Petri Latvala

Quoted 132 lines · Karthik B S

Added test to validate max pipe configuration for a platform. In the test, the reference CRC is collected first by doing modeset on all the outputs individually.Then a simultaneous modeset is done on all the outputs and the CRC is collected. This is compared with the reference CRC.

If the number of outputs connected is less than the number of pipes supported by the platform, then the test skips.

This test is added to verify if the max pipe configuration for a given platform is working fine. Even though there are other tests which test multipipe configuration, they test some other functionalities as well together with multipipe. This is a stand alone test that intends to only verify simultaneous modeset at the max pipe configuration.

v2: -Fix Typo in comment (Petri)
-Use igt_require_pipe_crc() to prevent crash in non i915 case
(Petri)
-Print the number of outputs and pipes in igt_require() for
debugging aid (Petri)

Signed-off-by Karthik B S <[email protected]>

---
  tests/Makefile.sources        |   1 +
  tests/kms_multipipe_modeset.c | 181 
++++++++++++++++++++++++++++++++++
  tests/meson.build             |   1 +
  3 files changed, 183 insertions(+)

create mode 100644 tests/kms_multipipe_modeset.c

tests/Makefile.sources +1 -0

index 32cbbf4f..c450fa0e 100644
@@ -61,6 +61,7 @@ TESTS_progs = \
      kms_lease \
      kms_legacy_colorkey \
      kms_mmap_write_crc \
+    kms_multipipe_modeset \
      kms_panel_fitting \
      kms_pipe_b_c_ivb \
      kms_pipe_crc_basic \

tests/kms_multipipe_modeset.c new file +4 -0

new file mode 100644
index 00000000..e1d292ee
@@ -0,0 +1,181 @@
+/*
+ * Copyright © 2020 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person 

obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Author:
+ * Karthik B S <[email protected]>
+ */

tests/kms_multipipe_modeset.c new file +4 -0

+
+#include "igt.h"
+
+IGT_TEST_DESCRIPTION("Test simultaneous modeset on all the 

supported pipes");

tests/kms_multipipe_modeset.c new file +30 -0

+
+typedef struct {
+    int drm_fd;
+    igt_display_t display;
+    struct igt_fb fb;
+} data_t;
+
+static void run_test(data_t *data, int valid_outputs)
+{
+    igt_output_t *output;
+    igt_pipe_crc_t *pipe_crcs[IGT_MAX_PIPES] = { 0 };
+    igt_crc_t ref_crcs[IGT_MAX_PIPES], new_crcs[IGT_MAX_PIPES];
+    igt_display_t *display = &data->display;
+    int width = 0, height = 0, i, count = 0;
+    int output_to_pipe[valid_outputs];
+    igt_pipe_t *pipe;
+    igt_plane_t *plane;
+    drmModeModeInfo *mode;
+
+    for_each_connected_output(display, output) {
+        mode = igt_output_get_mode(output);
+        igt_assert(mode);
+
+        igt_output_set_pipe(output, PIPE_NONE);
+
+        width = max(width, mode->hdisplay);
+        height = max(height, mode->vdisplay);
+    }
+
+    igt_create_pattern_fb(data->drm_fd, width, height, 

DRM_FORMAT_XRGB8888,

tests/kms_multipipe_modeset.c new file +3 -0

+                  LOCAL_DRM_FORMAT_MOD_NONE, &data->fb);
+
+    /* Make pipe-output mapping which will be used unchanged across 

the test */

tests/kms_multipipe_modeset.c new file +5 -0

+    for_each_pipe(display, i) {
+        count = 0;
+        for_each_connected_output(display, output) {
+            if (igt_pipe_connector_valid(i, output) &&
+                output->pending_pipe == PIPE_NONE) {

Quoted 8 lines

tests/kms_multipipe_modeset.c line 75

Quoted 8 lines

tests/kms_multipipe_modeset.c new file +8 -0

+                igt_output_set_pipe(output, i);
+                output_to_pipe[count] = i;
+                break;
+            }
+            count++;
+        }
+    }
+

Quoted 131 lines

Quoted 87 lines

+ /* Collect reference CRC by Committing individually on all
outputs*/

tests/kms_multipipe_modeset.c new file +22 -0

+    for_each_pipe(display, i) {
+        pipe = &display->pipes[i];
+        plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+
+        mode = NULL;
+
+        pipe_crcs[i] = igt_pipe_crc_new(display->drm_fd, i,
+                        INTEL_PIPE_CRC_SOURCE_AUTO);
+
+        count = 0;
+        for_each_connected_output(display, output) {
+            if (output_to_pipe[count] == pipe->pipe) {
+                igt_output_set_pipe(output, i);
+                mode = igt_output_get_mode(output);
+                igt_assert(mode);
+            } else
+                igt_output_set_pipe(output, PIPE_NONE);
+            count++;
+        }
+
+        igt_plane_set_fb(plane, &data->fb);
+        igt_fb_set_size(&data->fb, plane, mode->hdisplay, 

mode->vdisplay);

tests/kms_multipipe_modeset.c new file +26 -0

+        igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+
+        igt_display_commit2(display, COMMIT_ATOMIC);
+        igt_pipe_crc_collect_crc(pipe_crcs[i], &ref_crcs[i]);
+    }
+
+    /* Simultaneously commit on all outputs */
+    for_each_pipe(display, i) {
+        pipe = &display->pipes[i];
+        plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+
+        mode = NULL;
+
+        count = 0;
+        for_each_connected_output(display, output) {
+            if (output_to_pipe[count] == pipe->pipe) {
+                igt_output_set_pipe(output, i);
+                mode = igt_output_get_mode(output);
+                igt_assert(mode);
+                break;
+            }
+            count++;
+        }
+
+        igt_plane_set_fb(plane, &data->fb);
+        igt_fb_set_size(&data->fb, plane, mode->hdisplay, 

mode->vdisplay);

tests/kms_multipipe_modeset.c new file +27 -0

+        igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+    }
+
+    igt_display_commit2(display, COMMIT_ATOMIC);
+
+    /* CRC Verification */
+    for (count = 0; count < valid_outputs; count++) {
+        igt_pipe_crc_collect_crc(pipe_crcs[count], &new_crcs[count]);
+        igt_assert_crc_equal(&ref_crcs[count], &new_crcs[count]);
+    }
+
+    igt_plane_set_fb(plane, NULL);
+    igt_remove_fb(data->drm_fd, &data->fb);
+}
+
+static void test_multipipe(data_t *data)
+{
+    igt_output_t *output;
+    int valid_outputs = 0, num_pipes;
+
+    num_pipes = igt_display_get_n_pipes(&data->display);
+    for_each_connected_output(&data->display, output)
+        valid_outputs++;
+
+    igt_require_f(valid_outputs == num_pipes,
+              "Number of connected outputs(%d) not equal to the "
+              "number of pipes supported(%d)\n", valid_outputs, 

num_pipes);

tests/kms_multipipe_modeset.c new file +7 -0

+
+    run_test(data, valid_outputs);
+}
+
+igt_main
+{
+    data_t data;

tests/kms_multipipe_modeset.c line 168

Quoted 10 lines

tests/kms_multipipe_modeset.c new file +10 -0

+    drmModeResPtr res;
+
+    igt_fixture {
+        data.drm_fd = drm_open_driver_master(DRIVER_ANY);
+        kmstest_set_vt_graphics_mode();
+
+        igt_require_pipe_crc(data.drm_fd);
+        igt_display_require(&data.display, data.drm_fd);
+
+        res = drmModeGetResources(data.drm_fd);

Hmm, assigning to a local variable in an igt_fixture... But it's not read outside it, this is fine.

tests/kms_multipipe_modeset.c line 177

Quoted 10 lines

tests/kms_multipipe_modeset.c new file +6 -0

+        igt_assert(res);
+
+        kmstest_unset_all_crtcs(data.drm_fd, res);
+    }
+
+    igt_describe("Verify if simultaneous modesets on all the 

supported "

tests/kms_multipipe_modeset.c new file +3 -0

+             "pipes is successful. Validate using CRC verification");
+    igt_subtest("multipipe-modeset")
+        test_multipipe(&data);

This test binary is already called kms_multipipe_modeset, I wonder if we can find a better name for it, considering we might want to add more later.

"basic-crc-check" ?

Otherwise the patch LGTM.

Reviewed-by Petri Latvala <[email protected]>

Quoted 11 lines

tests/kms_multipipe_modeset.c new file +4 -0

+
+    igt_fixture
+        igt_display_fini(&data.display);
+}

tests/meson.build +0 -0

index 0bdcfbe4..88e4875b 100644
@@ -45,6 +45,7 @@ test_progs = [
      'kms_lease',
      'kms_legacy_colorkey',

Quoted 8 lines

Quoted 8 lines

tests/meson.build +1 -0

      'kms_mmap_write_crc',
+    'kms_multipipe_modeset',
      'kms_panel_fitting',
      'kms_pipe_b_c_ivb',
      'kms_pipe_crc_basic',

Signature · 1 line

2.22.0