Skip to contentSkip to conversation

arm64: dts: mt8173: fix cooling device range

PATCH RESEND Applied Michael Kao 2 participants 2 messages Apr 24, 2020 – May 15, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/1 arm64: dts: mt8173: fix cooling device range

When thermal reaches target temperature,it would be pinned to state 0 (max frequency and power).
Fix the throttling range to no limit.

---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
arch/arm64/boot/dts/mediatek/mt8173.dtsi +9 -4
index ccb8e88a60c5..cae2cec46cdc 100644
@@ -19,6 +19,7 @@
 #include <dt-bindings/power/mt8173-power.h>
 #include <dt-bindings/reset/mt8173-resets.h>
 #include <dt-bindings/gce/mt8173-gce.h>
+#include <dt-bindings/thermal/thermal.h>
 #include "mt8173-pinfunc.h"
 
 / {
@@ -294,14 +295,18 @@
 			cooling-maps {
 				map@0 {
 					trip = <&target>;
-					cooling-device = <&cpu0 0 0>,
-							 <&cpu1 0 0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT
+							  THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT
+							  THERMAL_NO_LIMIT>;
 					contribution = <3072>;
 				};
 				map@1 {
 					trip = <&target>;
-					cooling-device = <&cpu2 0 0>,
-							 <&cpu3 0 0>;
+					cooling-device = <&cpu2 THERMAL_NO_LIMIT
+							  THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT
+							  THERMAL_NO_LIMIT>;
 					contribution = <1024>;
 				};
 			};
Signature · 1 line
2.18.0
maintainer Applied
#1 lore raw
Quoted 6 lines · Michael Kao

When thermal reaches target temperature,it would be pinned to state 0 (max frequency and power).
Fix the throttling range to no limit.

applied to v5.7-next/dts64

Thanks!

Quoted 40 lines
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
arch/arm64/boot/dts/mediatek/mt8173.dtsi +9 -4
index ccb8e88a60c5..cae2cec46cdc 100644
@@ -19,6 +19,7 @@
 #include <dt-bindings/power/mt8173-power.h>
 #include <dt-bindings/reset/mt8173-resets.h>
 #include <dt-bindings/gce/mt8173-gce.h>
+#include <dt-bindings/thermal/thermal.h>
 #include "mt8173-pinfunc.h"
 
 / {
@@ -294,14 +295,18 @@
 			cooling-maps {
 				map@0 {
 					trip = <&target>;
-					cooling-device = <&cpu0 0 0>,
-							 <&cpu1 0 0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT
+							  THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT
+							  THERMAL_NO_LIMIT>;
 					contribution = <3072>;
 				};
 				map@1 {
 					trip = <&target>;
-					cooling-device = <&cpu2 0 0>,
-							 <&cpu3 0 0>;
+					cooling-device = <&cpu2 THERMAL_NO_LIMIT
+							  THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT
+							  THERMAL_NO_LIMIT>;
 					contribution = <1024>;
 				};
 			};