usb: xhci: Add support for Renesas USB controllers
Subsystems (6)
v10 cover usb: xhci: Add support for Renesas USB controllers
This series add support for Renesas USB controllers uPD720201 and uPD720202. These require firmware to be loaded and in case devices have ROM those can also be programmed if empty. If ROM is programmed, it runs from ROM as well.
This includes patches from Christian which supported these controllers w/o ROM and later my patches for ROM support and debugfs hook for rom erase and export of xhci-pci functions.
Changes in v10:
remove renesas_xhci_pci_probe and call renesas_xhci_check_request_fw and also cleanup exit code along with it.
Changes in v9:
Make fw load a sync call and have single instance of probe execute,
elimating probe/remove races
Add quirk for renesas and use that for loading
Changes in v8:
Fix compile error reported by Kbuild-bot by making usb_hcd_pci_probe() take const struct hc_driver * as argument
Changes in v7:
Make a single module which removes issues with module loading Keep the renesas code in renesas file
Add hc_driver as argument for usb_hcd_pci_probe and modify hdc drivers to
pass this and not use driver_data
Use driver data for fw name
Remove code to check if we need to load firmware or not remove multiple fw version support, we can do that with symlink in
userspace
Changes in v6:
Move the renesas code into a separate driver which invokes xhci-pci functions.
Changes in v5:
Added a debugfs rom erase patch, helps in debugging Squashed patch 1 & 2 as requested by Mathias
Changes in v4:
Rollback the delay values as we got device failures
Changes in v3:
Dropped patch 2 as discussed with Christian
Removed aligned 8 bytes check
Change order for firmware search from highest version to lowest Added entry for new firmware for device 0x14 as well Add tested by Christian
Changes in v2:
used macros for timeout count and delay
removed renesas_fw_alive_check
cleaned renesas_fw_callback
removed recurion for renesas_fw_download
added MODULE_FIRMWARE
added comment for multiple fw order
Christian Lamparter (1):
usb: renesas-xhci: Add the renesas xhci driver
Vinod Koul (4):
usb: hci: add hc_driver as argument for usb_hcd_pci_probe
usb: xhci: Add support for Renesas controller with memory
usb: renesas-xhci: Add ROM loader for uPD720201
usb: xhci: provide a debugfs hook for erasing rom
drivers/usb/core/hcd-pci.c | 7 +- drivers/usb/host/Makefile | 3 +- drivers/usb/host/ehci-pci.c | 6 +- drivers/usb/host/ohci-pci.c | 9 +- drivers/usb/host/uhci-pci.c | 8 +- drivers/usb/host/xhci-pci-renesas.c | 726 ++++++++++++++++++++++++++++ drivers/usb/host/xhci-pci.c | 42 +- drivers/usb/host/xhci-pci.h | 16 + drivers/usb/host/xhci.h | 1 + include/linux/usb/hcd.h | 3 +- 10 files changed, 798 insertions(+), 23 deletions(-) create mode 100644 drivers/usb/host/xhci-pci-renesas.c create mode 100644 drivers/usb/host/xhci-pci.h
Signature · 1 line
2.25.1
PATCH v10 1/5 usb: hci: add hc_driver as argument for usb_hcd_pci_probe
usb_hcd_pci_probe expects users to call this with driver_data set as hc_driver, that limits the possibility of using the driver_data for driver data.
Add hc_driver as argument to usb_hcd_pci_probe and modify the callers ehci/ohci/xhci/uhci to pass hc_driver as argument and freeup the driver_data used
Tested xhci driver on Dragon-board RB3, compile tested ehci, ohci and uhci
--- drivers/usb/core/hcd-pci.c | 7 ++++--- drivers/usb/host/ehci-pci.c | 6 ++---- drivers/usb/host/ohci-pci.c | 9 ++++++--- drivers/usb/host/uhci-pci.c | 8 ++++++-- drivers/usb/host/xhci-pci.c | 14 +++++--------- include/linux/usb/hcd.h | 3 ++- 6 files changed, 25 insertions(+), 22 deletions(-)
drivers/usb/core/hcd-pci.c +4 -3
@@ -159,6 +159,7 @@ static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd,* usb_hcd_pci_probe - initialize PCI-based HCDs * @dev: USB Host Controller being probed * @id: pci hotplug id connecting controller to HCD framework +* @driver: USB HC driver handle * Context: !in_interrupt() * * Allocates basic PCI resources for this USB host controller, and
@@ -169,9 +170,9 @@ static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd,* * Return: 0 if successful. */ -int usb_hcd_pci_probe (struct pci_dev *dev,const struct pci_device_id *id) +int usb_hcd_pci_probe (struct pci_dev *dev,const struct pci_device_id *id, +const struct hc_driver *driver) { -struct hc_driver *driver;struct usb_hcd *hcd;int retval;int hcd_irq =0 ;
@@ -181,7 +182,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)if (!id)return -EINVAL ; - driver = (struct hc_driver *)id->driver_data; +if (!driver)return -EINVAL ;
drivers/usb/host/ehci-pci.c +2 -4
@@ -360,23 +360,21 @@ static int ehci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) {if (is_bypassed_id (pdev))return -ENODEV ; -return usb_hcd_pci_probe (pdev, id); +return usb_hcd_pci_probe (pdev, id, &ehci_pci_hc_driver); }static void ehci_pci_remove (struct pci_dev *pdev) {pci_clear_mwi (pdev); -usb_hcd_pci_remove (pdev); +usb_hcd_pci_remove (pdev); }/* PCI driver selection metadata; PCI hotplugging uses this */ static const struct pci_device_id pci_ids [] = { {/* handle any USB 2.0 EHCI controller */ PCI_DEVICE_CLASS (PCI_CLASS_SERIAL_USB_EHCI , ~0 ), - .driver_data = (unsigned long ) &ehci_pci_hc_driver, }, {PCI_VDEVICE (STMICRO ,PCI_DEVICE_ID_STMICRO_USB_HOST ), - .driver_data = (unsigned long ) &ehci_pci_hc_driver, }, {/* end: all zeroes */ } };
drivers/usb/host/ohci-pci.c +6 -3
@@ -277,21 +277,24 @@ static const struct ohci_driver_overrides pci_overrides __initconst = {static const struct pci_device_id pci_ids[] = { {/* handle any USB OHCI controller */ PCI_DEVICE_CLASS (PCI_CLASS_SERIAL_USB_OHCI , ~0 ), - .driver_data = (unsigned long ) &ohci_pci_hc_driver, }, {/* The device in the ConneXT I/O hub has no class reg */ PCI_VDEVICE (STMICRO ,PCI_DEVICE_ID_STMICRO_USB_OHCI ), - .driver_data = (unsigned long ) &ohci_pci_hc_driver, }, {/* end: all zeroes */ } };MODULE_DEVICE_TABLE (pci, pci_ids); +static int ohci_pci_probe (struct pci_dev *dev,const struct pci_device_id *id) +{ +return usb_hcd_pci_probe (dev, id, &ohci_pci_hc_driver); +} +/* pci driver glue; this is a "new style" PCI driver module */ static struct pci_driver ohci_pci_driver = { .name = hcd_name, .id_table = pci_ids, - .probe = usb_hcd_pci_probe, + .probe = ohci_pci_probe, .remove = usb_hcd_pci_remove, .shutdown = usb_hcd_pci_shutdown,
drivers/usb/host/uhci-pci.c +6 -2
@@ -287,17 +287,21 @@ static const struct hc_driver uhci_driver = {static const struct pci_device_id uhci_pci_ids[] = { {/* handle any USB UHCI controller */ PCI_DEVICE_CLASS (PCI_CLASS_SERIAL_USB_UHCI , ~0 ), - .driver_data = (unsigned long ) &uhci_driver, }, {/* end: all zeroes */ } };MODULE_DEVICE_TABLE (pci, uhci_pci_ids); +static int uhci_pci_probe (struct pci_dev *dev,const struct pci_device_id *id) +{ +return usb_hcd_pci_probe (dev, id, &uhci_driver); +} +static struct pci_driver uhci_pci_driver = { .name = hcd_name, .id_table = uhci_pci_ids, - .probe = usb_hcd_pci_probe, + .probe = uhci_pci_probe, .remove = usb_hcd_pci_remove, .shutdown = uhci_shutdown,
drivers/usb/host/xhci-pci.c +5 -9
@@ -327,11 +327,8 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) {int retval;struct xhci_hcd *xhci; -struct hc_driver *driver;struct usb_hcd *hcd; - driver = (struct hc_driver *)id->driver_data; -/* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume (&dev->dev);
@@ -341,7 +338,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)* to say USB 2.0, but I'm not sure what the implications would be in * the other parts of the HCD code. */ - retval =usb_hcd_pci_probe (dev, id); + retval =usb_hcd_pci_probe (dev, id, &xhci_pci_hc_driver);if (retval) goto put_runtime_pm;
@@ -349,8 +346,8 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)/* USB 2.0 roothub is stored in the PCI device now. */ hcd =dev_get_drvdata (&dev->dev); xhci =hcd_to_xhci (hcd); - xhci->shared_hcd =usb_create_shared_hcd (driver, &dev->dev, -pci_name (dev), hcd); + xhci->shared_hcd =usb_create_shared_hcd (&xhci_pci_hc_driver, &dev->dev, +pci_name (dev), hcd);if (!xhci->shared_hcd) { retval = -ENOMEM ; goto dealloc_usb2_hcd;
@@ -544,10 +541,9 @@ static void xhci_pci_shutdown(struct usb_hcd *hcd)/*-------------------------------------------------------------------------*/ /* PCI driver selection metadata; PCI hotplugging uses this */ -static const struct pci_device_id pci_ids[] = { { +static const struct pci_device_id pci_ids[] = {/* handle any USB 3.0 xHCI controller */ -PCI_DEVICE_CLASS (PCI_CLASS_SERIAL_USB_XHCI , ~0 ), - .driver_data = (unsigned long ) &xhci_pci_hc_driver, + {PCI_DEVICE_CLASS (PCI_CLASS_SERIAL_USB_XHCI , ~0 ), }, {/* end: all zeroes */ } };
include/linux/usb/hcd.h +2 -1
@@ -479,7 +479,8 @@ extern void usb_hcd_platform_shutdown(struct platform_device *dev);struct pci_dev ;struct pci_device_id ;extern int usb_hcd_pci_probe (struct pci_dev *dev, -const struct pci_device_id *id); +const struct pci_device_id *id, +const struct hc_driver *driver);extern void usb_hcd_pci_remove (struct pci_dev *dev);extern void usb_hcd_pci_shutdown (struct pci_dev *dev);
Signature · 1 line
2.25.1
PATCH v10 2/5 usb: renesas-xhci: Add the renesas xhci driver
In reply to Vinod KoulFrom: Christian Lamparter <[email protected]>
This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. It uses xhci-pci driver for most of the work.
This is added in Makefile before the xhci-pci driver so that it first get probed for renesas devices before the xhci-pci driver has a chance to claim any device.
This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM".
The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives.
The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices:
- uPD720201 ES 2.0 sample whose revision ID is 2.
- uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
- uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
[vkoul: fixed comments:
used macros for timeout count and delay
removed renesas_fw_alive_check
cleaned renesas_fw_callback
removed recursion for renesas_fw_download
add register defines and field names
move to a separate file
make fw loader as sync probe so that we execute in probe and prevent race]
--- drivers/usb/host/Makefile | 3 +- drivers/usb/host/xhci-pci-renesas.c | 353 ++++++++++++++++++++++++++++ drivers/usb/host/xhci-pci.h | 16 ++ 3 files changed, 371 insertions(+), 1 deletion(-) create mode 100644 drivers/usb/host/xhci-pci-renesas.c create mode 100644 drivers/usb/host/xhci-pci.h
drivers/usb/host/Makefile +2 -1
@@ -70,7 +70,8 @@ obj-$(CONFIG_USB_OHCI_HCD_DAVINCI) += ohci-da8xx.o obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o obj-$(CONFIG_USB_FHCI_HCD) += fhci.o obj-$(CONFIG_USB_XHCI_HCD) += xhci-hcd.o -obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o +usb-xhci-pci-objs := xhci-pci.o xhci-pci-renesas.o +obj-$(CONFIG_USB_XHCI_PCI) += usb-xhci-pci.o obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o obj-$(CONFIG_USB_XHCI_HISTB) += xhci-histb.o obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o
drivers/usb/host/xhci-pci-renesas.c new file +353 -0
353 lines not on this page · raw message
drivers/usb/host/xhci-pci.h new file +16 -0
@@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (C) 2019-2020 Linaro Limited */ + +#ifndef XHCI_PCI_H +#define XHCI_PCI_H + +int renesas_xhci_check_request_fw (struct pci_dev *dev, +const struct pci_device_id *id); +void renesas_xhci_pci_exit (struct pci_dev *dev); + +struct xhci_driver_data { +u64 quirks; +const char *firmware; +}; + +#endif
Signature · 1 line
2.25.1
PATCH v10 3/5 usb: xhci: Add support for Renesas controller with memory
In reply to Vinod KoulSome rensas controller like uPD720201 and uPD720202 need firmware to be loaded. Add these devices in table and invoke renesas firmware loader functions to check and load the firmware into device memory when required.
--- drivers/usb/host/xhci-pci.c | 28 ++++++++++++++++++++++++++++ drivers/usb/host/xhci.h | 1 + 2 files changed, 29 insertions(+)
drivers/usb/host/xhci-pci.c +28 -0
@@ -15,6 +15,7 @@#include "xhci.h" #include "xhci-trace.h" +#include "xhci-pci.h" #define SSIC_PORT_NUM 2#define SSIC_PORT_CFG2 0x880c
@@ -319,6 +320,8 @@ static int xhci_pci_setup(struct usb_hcd *hcd)return xhci_pci_reinit (xhci, pdev); } +static bool renesas_device; +/* * We need to register our own PCI probe function (instead of the USB core's * function) in order to create a second roothub under xHCI.
@@ -328,6 +331,16 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)int retval;struct xhci_hcd *xhci;struct usb_hcd *hcd; +struct xhci_driver_data *driver_data; + + renesas_device = false; + driver_data = (struct xhci_driver_data *)id->driver_data; +if (driver_data && driver_data->quirks &XHCI_RENESAS_FW_QUIRK ) { + retval =renesas_xhci_check_request_fw (dev, id); +if (retval) +return retval; + renesas_device = true; + }/* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume (&dev->dev);
@@ -388,6 +401,9 @@ static void xhci_pci_remove(struct pci_dev *dev) {struct xhci_hcd *xhci; +if (renesas_device) +renesas_xhci_pci_exit (dev); + xhci =hcd_to_xhci (pci_get_drvdata (dev)); xhci->xhc_state |=XHCI_STATE_REMOVING ;
@@ -540,14 +556,26 @@ static void xhci_pci_shutdown(struct usb_hcd *hcd)/*-------------------------------------------------------------------------*/ +static const struct xhci_driver_data reneses_data = { + .quirks =XHCI_RENESAS_FW_QUIRK , + .firmware ="renesas_usb_fw.mem" , +}; +/* PCI driver selection metadata; PCI hotplugging uses this */ static const struct pci_device_id pci_ids[] = { + {PCI_DEVICE (0x1912 ,0x0014 ), + .driver_data = (unsigned long )&reneses_data, + }, + {PCI_DEVICE (0x1912 ,0x0015 ), + .driver_data = (unsigned long )&reneses_data, + },/* handle any USB 3.0 xHCI controller */ {PCI_DEVICE_CLASS (PCI_CLASS_SERIAL_USB_XHCI , ~0 ), }, {/* end: all zeroes */ } };MODULE_DEVICE_TABLE (pci, pci_ids); +MODULE_FIRMWARE ("renesas_usb_fw.mem" );/* pci driver glue; this is a "new style" PCI driver module */ static struct pci_driver xhci_pci_driver = {
drivers/usb/host/xhci.h +1 -0
@@ -1873,6 +1873,7 @@ struct xhci_hcd {#define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33)#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) +#define XHCI_RENESAS_FW_QUIRK BIT_ULL(36)unsigned int num_active_eps;unsigned int limit_active_eps;
Signature · 1 line
2.25.1
Re: [PATCH v10 3/5] usb: xhci: Add support for Renesas controller with memory
Quoted 24 lines · Vinod Koul
Some rensas controller like uPD720201 and uPD720202 need firmware to be loaded. Add these devices in table and invoke renesas firmware loader functions to check and load the firmware into device memory when required.
Signed-off-by Vinod Koul <[email protected]>--- drivers/usb/host/xhci-pci.c | 28 ++++++++++++++++++++++++++++ drivers/usb/host/xhci.h | 1 + 2 files changed, 29 insertions(+)drivers/usb/host/xhci-pci.c +1
-0@@ -15,6 +15,7 @@#include "xhci.h" #include "xhci-trace.h" +#include "xhci-pci.h" #define SSIC_PORT_NUM 2#define SSIC_PORT_CFG2 0x880c
drivers/usb/host/xhci-pci.c static int xhci_pci_setup(struct usb_hcd *hcd) · line 323
Quoted 4 lines
drivers/usb/host/xhci-pci.c +1
-0@@ -319,6 +320,8 @@ static int xhci_pci_setup(struct usb_hcd *hcd)return xhci_pci_reinit (xhci, pdev); } +static bool renesas_device;
hmm, we shouldn't need this
Quoted 22 lines
drivers/usb/host/xhci-pci.c +11
-0+/* * We need to register our own PCI probe function (instead of the USB core's * function) in order to create a second roothub under xHCI. @@ -328,6 +331,16 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)int retval;struct xhci_hcd *xhci;struct usb_hcd *hcd; +struct xhci_driver_data *driver_data; + + renesas_device = false; + driver_data = (struct xhci_driver_data *)id->driver_data; +if (driver_data && driver_data->quirks &XHCI_RENESAS_FW_QUIRK ) { + retval =renesas_xhci_check_request_fw (dev, id); +if (retval) +return retval; + renesas_device = true; + }/* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume (&dev->dev);
drivers/usb/host/xhci-pci.c static void xhci_pci_remove(struct pci_dev *dev) · line 406
Quoted 6 lines
drivers/usb/host/xhci-pci.c +3
-0@@ -388,6 +401,9 @@ static void xhci_pci_remove(struct pci_dev *dev) {struct xhci_hcd *xhci; +if (renesas_device) +renesas_xhci_pci_exit (dev); +
Ah, I see, what we really should do is make sure the quirks in the driver data get added to xhci->quirks, and then just check for the correct quirk in xhci_pci_remove.
if (xhci->quirks & XHCI_RENESAS_FW_QUIRK)
renesas_xhci_pci_exit(dev);
Heikki Krogerus did some work on this a long time ago, below code is based on his work. It needs to be added:
drivers/usb/host/xhci-pci.c +9 -1
@@ -88,8 +88,16 @@ static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)static void xhci_pci_quirks (struct device *dev,struct xhci_hcd *xhci) { -struct pci_dev *pdev =to_pci_dev (dev); +struct pci_dev *pdev =to_pci_dev (dev); +struct xhci_driver_data *driver_data; +const struct pci_device_id *id; + id =pci_match_id (pdev->driver->id_table, pdev); + +if (id && id->driver_data) { + driver_data = (struct xhci_driver_data *)id->driver_data; + xhci->quirks |= driver_data->quirks; + }/* Look for vendor-specific quirks */ if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
-Mathias
Re: [PATCH v10 3/5] usb: xhci: Add support for Renesas controller with memory
Quoted 57 lines · Mathias Nyman
Quoted 24 lines · Vinod Koul
Some rensas controller like uPD720201 and uPD720202 need firmware to be loaded. Add these devices in table and invoke renesas firmware loader functions to check and load the firmware into device memory when required.
Signed-off-by Vinod Koul <[email protected]>--- drivers/usb/host/xhci-pci.c | 28 ++++++++++++++++++++++++++++ drivers/usb/host/xhci.h | 1 + 2 files changed, 29 insertions(+)drivers/usb/host/xhci-pci.c +1
-0@@ -15,6 +15,7 @@#include "xhci.h" #include "xhci-trace.h" +#include "xhci-pci.h" #define SSIC_PORT_NUM 2#define SSIC_PORT_CFG2 0x880cdrivers/usb/host/xhci-pci.c static int xhci_pci_setup(struct usb_hcd *hcd) · line 323
Quoted 4 lines
drivers/usb/host/xhci-pci.c +1
-0@@ -319,6 +320,8 @@ static int xhci_pci_setup(struct usb_hcd *hcd)return xhci_pci_reinit (xhci, pdev); } +static bool renesas_device;hmm, we shouldn't need this
Quoted 25 lines
drivers/usb/host/xhci-pci.c +11
-0+/* * We need to register our own PCI probe function (instead of the USB core's * function) in order to create a second roothub under xHCI. @@ -328,6 +331,16 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)int retval;struct xhci_hcd *xhci;struct usb_hcd *hcd; +struct xhci_driver_data *driver_data; + + renesas_device = false; + driver_data = (struct xhci_driver_data *)id->driver_data; +if (driver_data && driver_data->quirks &XHCI_RENESAS_FW_QUIRK ) { + retval =renesas_xhci_check_request_fw (dev, id); +if (retval) +return retval; + renesas_device = true; + }/* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume (&dev->dev);@@ -388,6 +401,9 @@ static void xhci_pci_remove(struct pci_dev *dev) {struct xhci_hcd *xhci;
Quoted 6 lines
drivers/usb/host/xhci-pci.c static void xhci_pci_remove(struct pci_dev *dev) · line 406
Quoted 3 lines
drivers/usb/host/xhci-pci.c +3
-0+if (renesas_device) +renesas_xhci_pci_exit (dev); +Ah, I see, what we really should do is make sure the quirks in the driver data get added to
xhci->quirks, and then just check for the correct quirk inxhci_pci_remove.
Ah sure that does sound better, I will update this as well and send an update with these changes
Quoted 32 lines
if (
xhci->quirks&XHCI_RENESAS_FW_QUIRK)renesas_xhci_pci_exit(dev);Heikki Krogerus did some work on this a long time ago, below code is based on his work. It needs to be added:
drivers/usb/host/xhci-pci.c +9
-2@@ -88,8 +88,16 @@ static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)static void xhci_pci_quirks (struct device *dev,struct xhci_hcd *xhci) { -struct pci_dev *pdev =to_pci_dev (dev); +struct pci_dev *pdev =to_pci_dev (dev); +struct xhci_driver_data *driver_data; +const struct pci_device_id *id; + id =pci_match_id (pdev->driver->id_table, pdev); + +if (id && id->driver_data) { + driver_data = (struct xhci_driver_data *)id->driver_data; + xhci->quirks |= driver_data->quirks; + }/* Look for vendor-specific quirks */ if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK || -Mathias
Signature · 1 line
~Vinod
Re: [PATCH v10 3/5] usb: xhci: Add support for Renesas controller with memory
Quoted 16 lines · Vinod Koul
Quoted 8 lines · Mathias Nyman
Quoted 6 lines · Vinod Koul
(quoted diff) +0
-0/* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume(&dev->dev);@@ -388,6 +401,9 @@ static void xhci_pci_remove(struct pci_dev *dev) { struct xhci_hcd *xhci;Quoted 6 lines
Review static void xhci_pci_remove(struct pci_dev *dev) · line 406
Quoted 3 lines
(quoted diff) +3
-0+ if (renesas_device) + renesas_xhci_pci_exit(dev); +Ah, I see, what we really should do is make sure the quirks in the driver data get added to
xhci->quirks, and then just check for the correct quirk inxhci_pci_remove.
Quoted 2 lines
Ah sure that does sound better, I will update this as well and send an update with these changes
This works for me.. But I have kept the code as in the xhci_pci_probe(), ofcourse removed bool renesas_device.
the xhci is not valid before invoking renesas_xhci_check_request_fw(). Is there another way to get xhci from dev without calling usb_hcd_pci_probe().
xhci = hcd_to_xhci(hcd) doesn't seem to work before that!
Signature · 1 line
~Vinod
Re: [PATCH v10 3/5] usb: xhci: Add support for Renesas controller with memory
Quoted 17 lines · Vinod Koul
Quoted 16 lines · Vinod Koul
Quoted 14 lines · Mathias Nyman
drivers/usb/host/xhci-pci.c static void xhci_pci_remove(struct pci_dev *dev) · line 406
Quoted 9 lines · Vinod Koul
drivers/usb/host/xhci-pci.c +3
-0/* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume (&dev->dev);@@ -388,6 +401,9 @@ static void xhci_pci_remove(struct pci_dev *dev) {struct xhci_hcd *xhci; +if (renesas_device) +renesas_xhci_pci_exit (dev); +Ah, I see, what we really should do is make sure the quirks in the driver data get added to
xhci->quirks, and then just check for the correct quirk inxhci_pci_remove.
Quoted 5 lines
Quoted 2 lines
Ah sure that does sound better, I will update this as well and send an update with these changes
This works for me.. But I have kept the code as in the
xhci_pci_probe(), ofcourse removed boolrenesas_device.
That's fine, xhci is just hcd->hcd_priv, and it doesn't exists before usb_hcd_pci_probe() is called
usb_hcd_pci_probe()
usb_create_hcd()
hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
-Mathias
Re: [PATCH v10 3/5] usb: xhci: Add support for Renesas controller with memory
Quoted 24 lines · Mathias Nyman
Quoted 17 lines · Vinod Koul
Quoted 16 lines · Vinod Koul
Quoted 14 lines · Mathias Nyman
drivers/usb/host/xhci-pci.c static void xhci_pci_remove(struct pci_dev *dev) · line 406
Quoted 9 lines · Vinod Koul
drivers/usb/host/xhci-pci.c +3
-0/* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume (&dev->dev);@@ -388,6 +401,9 @@ static void xhci_pci_remove(struct pci_dev *dev) {struct xhci_hcd *xhci; +if (renesas_device) +renesas_xhci_pci_exit (dev); +Ah, I see, what we really should do is make sure the quirks in the driver data get added to
xhci->quirks, and then just check for the correct quirk inxhci_pci_remove.Quoted 5 lines
Quoted 2 lines
Ah sure that does sound better, I will update this as well and send an update with these changes
This works for me.. But I have kept the code as in the
xhci_pci_probe(), ofcourse removed boolrenesas_device.
Quoted 6 lines
That's fine, xhci is just
hcd->hcd_priv, and it doesn't exists beforeusb_hcd_pci_probe()is called
usb_hcd_pci_probe()
usb_create_hcd()hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
Right, thanks for confirming
Signature · 1 line
~Vinod
PATCH v10 4/5 usb: renesas-xhci: Add ROM loader for uPD720201
In reply to Vinod KouluPD720201 supports ROM and allows software to program the ROM and boot from it. Add support for detecting if ROM is present, if so load the ROM if not programmed earlier.
--- drivers/usb/host/xhci-pci-renesas.c | 342 +++++++++++++++++++++++++++- 1 file changed, 341 insertions(+), 1 deletion(-)
drivers/usb/host/xhci-pci-renesas.c +341 -1
@@ -50,6 +50,22 @@#define RENESAS_RETRY 10000#define RENESAS_DELAY 10 +#define ROM_VALID_01 0x2013 +#define ROM_VALID_02 0x2026 + +static int renesas_verify_fw_version (struct pci_dev *pdev,u32 version) +{ +switch (version) { +case ROM_VALID_01 : +case ROM_VALID_02 : +return 0 ; +default : +dev_err (&pdev->dev,"FW has invalid version :%d\n" , version); +return 1 ; + } +return -EINVAL ; +} +static int renesas_fw_download_image (struct pci_dev *dev,const u32 *fw,size_t step)
@@ -144,10 +160,84 @@ static int renesas_fw_verify(const void *fw_data,return 0 ; } -static int renesas_fw_check_running (struct pci_dev *pdev) +static bool renesas_check_rom (struct pci_dev *pdev) { +u16 rom_status; +int retval; + +/* Check if external ROM exists */ + retval =pci_read_config_word (pdev,RENESAS_ROM_STATUS , &rom_status); +if (retval) +return false; + + rom_status &=RENESAS_ROM_STATUS_ROM_EXISTS ; +if (rom_status) { +dev_dbg (&pdev->dev,"External ROM exists\n" ); +return true;/* External ROM exists */ + } + +return false; +} + +static int renesas_check_rom_state (struct pci_dev *pdev) +{ +u16 rom_state; +u32 version;int err; + +/* check FW version */ + err =pci_read_config_dword (pdev,RENESAS_FW_VERSION , &version); +if (err) +return pcibios_err_to_errno (err); + + version &=RENESAS_FW_VERSION_FIELD ; + version = version >>RENESAS_FW_VERSION_OFFSET ; + + err =renesas_verify_fw_version (pdev, version); +if (err) +return err; + +/* +* Test if ROM is present and loaded, if so we can skip everything +*/ + err =pci_read_config_word (pdev,RENESAS_ROM_STATUS , &rom_state); +if (err) +return pcibios_err_to_errno (err); + +if (rom_state &BIT (15 )) { +/* ROM exists */ +dev_dbg (&pdev->dev,"ROM exists\n" ); + +/* Check the "Result Code" Bits (6:4) and act accordingly */ +switch (rom_state &RENESAS_ROM_STATUS_RESULT ) { +case RENESAS_ROM_STATUS_SUCCESS : +return 0 ; + +case RENESAS_ROM_STATUS_NO_RESULT :/* No result yet */ +return 0 ; + +case RENESAS_ROM_STATUS_ERROR :/* Error State */ +default :/* All other states are marked as "Reserved states" */ +dev_err (&pdev->dev,"Invalid ROM.." ); +break ; + } + } + +return -EIO ; +} + +static int renesas_fw_check_running (struct pci_dev *pdev) +{u8 fw_state; +int err; + +/* Check if device has ROM and loaded, if so skip everything */ + err =renesas_check_rom (pdev); +if (err) {/* we have rom */ + err =renesas_check_rom_state (pdev); +if (!err) +return err; + }/* * Test if the device is actually needing the firmware. As most
@@ -303,11 +393,261 @@ static int renesas_fw_download(struct pci_dev *pdev,return 0 ; } +static void renesas_rom_erase (struct pci_dev *pdev) +{ +int retval, i; +u8 status; + +dev_dbg (&pdev->dev,"Performing ROM Erase...\n" ); + retval =pci_write_config_dword (pdev,RENESAS_DATA0 , +RENESAS_ROM_ERASE_MAGIC ); +if (retval) { +dev_err (&pdev->dev,"ROM erase, magic word write failed: %d\n" , +pcibios_err_to_errno (retval)); +return ; + } + + retval =pci_read_config_byte (pdev,RENESAS_ROM_STATUS , &status); +if (retval) { +dev_err (&pdev->dev,"ROM status read failed: %d\n" , +pcibios_err_to_errno (retval)); +return ; + } + status |=RENESAS_ROM_STATUS_ERASE ; + retval =pci_write_config_byte (pdev,RENESAS_ROM_STATUS , status); +if (retval) { +dev_err (&pdev->dev,"ROM erase set word write failed\n" ); +return ; + } + +/* sleep a bit while ROM is erased */ +msleep (20 ); + +for (i =0 ; i <RENESAS_RETRY ; i++) { + retval =pci_read_config_byte (pdev,RENESAS_ROM_STATUS , + &status); + status &=RENESAS_ROM_STATUS_ERASE ; +if (!status) +break ; + +mdelay (RENESAS_DELAY ); + } + +if (i ==RENESAS_RETRY ) +dev_dbg (&pdev->dev,"Chip erase timedout: %x\n" , status); + +dev_dbg (&pdev->dev,"ROM Erase... Done success\n" ); +} + +static bool renesas_download_rom (struct pci_dev *pdev, +const u32 *fw,size_t step) +{ +bool data0_or_data1; +u8 fw_status; +size_t i; +int err; + +/* +* The hardware does alternate between two 32-bit pages. +* (This is because each row of the firmware is 8 bytes). +* +* for even steps we use DATA0, for odd steps DATA1. +*/ + data0_or_data1 = (step &1 ) ==1 ; + +/* Read "Set DATAX" and confirm it is cleared. */ +for (i =0 ; i <RENESAS_RETRY ; i++) { + err =pci_read_config_byte (pdev,RENESAS_ROM_STATUS_MSB , + &fw_status); +if (err) { +dev_err (&pdev->dev,"Read ROM Status failed: %d\n" , +pcibios_err_to_errno (err)); +return false; + } +if (!(fw_status &BIT (data0_or_data1))) +break ; + +udelay (RENESAS_DELAY ); + } +if (i ==RENESAS_RETRY ) { +dev_err (&pdev->dev,"Timeout for Set DATAX step: %zd\n" , step); +return false; + } + +/* +* Write FW data to "DATAX". +* "LSB is left" => force little endian +*/ + err =pci_write_config_dword (pdev, data0_or_data1 ? +RENESAS_DATA1 :RENESAS_DATA0 , + (__force u32 )cpu_to_le32 (fw[step])); +if (err) { +dev_err (&pdev->dev,"Write to DATAX failed: %d\n" , +pcibios_err_to_errno (err)); +return false; + } + +udelay (100 ); + +/* Set "Set DATAX". */ + err =pci_write_config_byte (pdev,RENESAS_ROM_STATUS_MSB , +BIT (data0_or_data1)); +if (err) { +dev_err (&pdev->dev,"Write config for DATAX failed: %d\n" , +pcibios_err_to_errno (err)); +return false; + } + +return true; +} + +static bool renesas_setup_rom (struct pci_dev *pdev,const struct firmware *fw) +{ +const u32 *fw_data = (const u32 *)fw->data; +int err, i; +u8 status; + +/* 2. Write magic word to Data0 */ + err =pci_write_config_dword (pdev,RENESAS_DATA0 , +RENESAS_ROM_WRITE_MAGIC ); +if (err) +return false; + +/* 3. Set External ROM access */ + err =pci_write_config_byte (pdev,RENESAS_ROM_STATUS , +RENESAS_ROM_STATUS_ACCESS ); +if (err) + goto remove_bypass; + +/* 4. Check the result */ + err =pci_read_config_byte (pdev,RENESAS_ROM_STATUS , &status); +if (err) + goto remove_bypass; + status &=GENMASK (6 ,4 ); +if (status) { +dev_err (&pdev->dev, +"setting external rom failed: %x\n" , status); + goto remove_bypass; + } + +/* 5 to 16 Write FW to DATA0/1 while checking SetData0/1 */ +for (i =0 ; i < fw->size /4 ; i++) { + err =renesas_download_rom (pdev, fw_data, i); +if (!err) { +dev_err (&pdev->dev, +"ROM Download Step %d failed at position %d bytes\n" , + i, i *4 ); + goto remove_bypass; + } + } + +/* +* wait till DATA0/1 is cleared +*/ +for (i =0 ; i <RENESAS_RETRY ; i++) { + err =pci_read_config_byte (pdev,RENESAS_ROM_STATUS_MSB , + &status); +if (err) + goto remove_bypass; +if (!(status & (BIT (0 ) |BIT (1 )))) +break ; + +udelay (RENESAS_DELAY ); + } +if (i ==RENESAS_RETRY ) { +dev_err (&pdev->dev,"Final Firmware ROM Download step timed out\n" ); + goto remove_bypass; + } + +/* 17. Remove bypass */ + err =pci_write_config_byte (pdev,RENESAS_ROM_STATUS ,0 ); +if (err) +return false; + +udelay (10 ); + +/* 18. check result */ +for (i =0 ; i <RENESAS_RETRY ; i++) { + err =pci_read_config_byte (pdev,RENESAS_ROM_STATUS , &status); +if (err) { +dev_err (&pdev->dev,"Read ROM status failed:%d\n" , +pcibios_err_to_errno (err)); +return false; + } + status &=RENESAS_ROM_STATUS_RESULT ; +if (status ==RENESAS_ROM_STATUS_SUCCESS ) { +dev_dbg (&pdev->dev,"Download ROM success\n" ); +break ; + } +udelay (RENESAS_DELAY ); + } +if (i ==RENESAS_RETRY ) {/* Timed out */ +dev_err (&pdev->dev, +"Download to external ROM TO: %x\n" , status); +return false; + } + +dev_dbg (&pdev->dev,"Download to external ROM succeeded\n" ); + +/* Last step set Reload */ + err =pci_write_config_byte (pdev,RENESAS_ROM_STATUS , +RENESAS_ROM_STATUS_RELOAD ); +if (err) { +dev_err (&pdev->dev,"Set ROM execute failed: %d\n" , +pcibios_err_to_errno (err)); +return false; + } + +/* +* wait till Reload is cleared +*/ +for (i =0 ; i <RENESAS_RETRY ; i++) { + err =pci_read_config_byte (pdev,RENESAS_ROM_STATUS , &status); +if (err) +return false; +if (!(status &RENESAS_ROM_STATUS_RELOAD )) +break ; + +udelay (RENESAS_DELAY ); + } +if (i ==RENESAS_RETRY ) { +dev_err (&pdev->dev,"ROM Exec timed out: %x\n" , status); +return false; + } + +return true; + +remove_bypass: +pci_write_config_byte (pdev,RENESAS_ROM_STATUS ,0 ); +return false; +} +static int renesas_load_fw (struct pci_dev *pdev,const struct firmware *fw) {int err =0 ; +bool rom; + +/* Check if the device has external ROM */ + rom =renesas_check_rom (pdev); +if (rom) { +/* perform chip erase first */ +renesas_rom_erase (pdev); + +/* lets try loading fw on ROM first */ + rom =renesas_setup_rom (pdev, fw); +if (!rom) { +dev_dbg (&pdev->dev, +"ROM load failed, falling back on FW load\n" ); + }else { +dev_dbg (&pdev->dev, +"ROM load success\n" ); + goto exit; + } + } err =renesas_fw_download (pdev, fw); + +exit:if (err)dev_err (&pdev->dev,"firmware failed to download (%d)." , err);return err;
Signature · 1 line
2.25.1
Re: [PATCH v10 4/5] usb: renesas-xhci: Add ROM loader for uPD720201
Quoted 23 lines · Vinod Koul
uPD720201 supports ROM and allows software to program the ROM and boot from it. Add support for detecting if ROM is present, if so load the ROM if not programmed earlier.
Signed-off-by Vinod Koul <[email protected]>Cc Yoshihiro Shimoda <[email protected]>Cc Christian Lamparter <[email protected]>--- drivers/usb/host/xhci-pci-renesas.c | 342 +++++++++++++++++++++++++++- 1 file changed, 341 insertions(+), 1 deletion(-)drivers/usb/host/xhci-pci-renesas.c +4
-0@@ -50,6 +50,22 @@#define RENESAS_RETRY 10000#define RENESAS_DELAY 10 +#define ROM_VALID_01 0x2013 +#define ROM_VALID_02 0x2026 + +static int renesas_verify_fw_version (struct pci_dev *pdev,u32 version)
drivers/usb/host/xhci-pci-renesas.c line 66
Quoted 10 lines
drivers/usb/host/xhci-pci-renesas.c +10
-0+{ +switch (version) { +case ROM_VALID_01 : +case ROM_VALID_02 : +return 0 ; +default : +dev_err (&pdev->dev,"FW has invalid version :%d\n" , version); +return 1 ; + } +return -EINVAL ;
This never returns -EINVAL
Maybe just get rid of the default case and print
the error message before returning
Quoted 192 lines
drivers/usb/host/xhci-pci-renesas.c +174
-1+} +static int renesas_fw_download_image (struct pci_dev *dev,const u32 *fw,size_t step)@@ -144,10 +160,84 @@ static int renesas_fw_verify(const void *fw_data,return 0 ; } -static int renesas_fw_check_running (struct pci_dev *pdev) +static bool renesas_check_rom (struct pci_dev *pdev) { +u16 rom_status; +int retval; + +/* Check if external ROM exists */ + retval =pci_read_config_word (pdev,RENESAS_ROM_STATUS , &rom_status); +if (retval) +return false; + + rom_status &=RENESAS_ROM_STATUS_ROM_EXISTS ; +if (rom_status) { +dev_dbg (&pdev->dev,"External ROM exists\n" ); +return true;/* External ROM exists */ + } + +return false; +} + +static int renesas_check_rom_state (struct pci_dev *pdev) +{ +u16 rom_state; +u32 version;int err; + +/* check FW version */ + err =pci_read_config_dword (pdev,RENESAS_FW_VERSION , &version); +if (err) +return pcibios_err_to_errno (err); + + version &=RENESAS_FW_VERSION_FIELD ; + version = version >>RENESAS_FW_VERSION_OFFSET ; + + err =renesas_verify_fw_version (pdev, version); +if (err) +return err; + +/* +* Test if ROM is present and loaded, if so we can skip everything +*/ + err =pci_read_config_word (pdev,RENESAS_ROM_STATUS , &rom_state); +if (err) +return pcibios_err_to_errno (err); + +if (rom_state &BIT (15 )) { +/* ROM exists */ +dev_dbg (&pdev->dev,"ROM exists\n" ); + +/* Check the "Result Code" Bits (6:4) and act accordingly */ +switch (rom_state &RENESAS_ROM_STATUS_RESULT ) { +case RENESAS_ROM_STATUS_SUCCESS : +return 0 ; + +case RENESAS_ROM_STATUS_NO_RESULT :/* No result yet */ +return 0 ; + +case RENESAS_ROM_STATUS_ERROR :/* Error State */ +default :/* All other states are marked as "Reserved states" */ +dev_err (&pdev->dev,"Invalid ROM.." ); +break ; + } + } + +return -EIO ; +} + +static int renesas_fw_check_running (struct pci_dev *pdev) +{u8 fw_state; +int err; + +/* Check if device has ROM and loaded, if so skip everything */ + err =renesas_check_rom (pdev); +if (err) {/* we have rom */ + err =renesas_check_rom_state (pdev); +if (!err) +return err; + }/* * Test if the device is actually needing the firmware. As most @@ -303,11 +393,261 @@ static int renesas_fw_download(struct pci_dev *pdev,return 0 ; } +static void renesas_rom_erase (struct pci_dev *pdev) +{ +int retval, i; +u8 status; + +dev_dbg (&pdev->dev,"Performing ROM Erase...\n" ); + retval =pci_write_config_dword (pdev,RENESAS_DATA0 , +RENESAS_ROM_ERASE_MAGIC ); +if (retval) { +dev_err (&pdev->dev,"ROM erase, magic word write failed: %d\n" , +pcibios_err_to_errno (retval)); +return ; + } + + retval =pci_read_config_byte (pdev,RENESAS_ROM_STATUS , &status); +if (retval) { +dev_err (&pdev->dev,"ROM status read failed: %d\n" , +pcibios_err_to_errno (retval)); +return ; + } + status |=RENESAS_ROM_STATUS_ERASE ; + retval =pci_write_config_byte (pdev,RENESAS_ROM_STATUS , status); +if (retval) { +dev_err (&pdev->dev,"ROM erase set word write failed\n" ); +return ; + } + +/* sleep a bit while ROM is erased */ +msleep (20 ); + +for (i =0 ; i <RENESAS_RETRY ; i++) { + retval =pci_read_config_byte (pdev,RENESAS_ROM_STATUS , + &status); + status &=RENESAS_ROM_STATUS_ERASE ; +if (!status) +break ; + +mdelay (RENESAS_DELAY ); + } + +if (i ==RENESAS_RETRY ) +dev_dbg (&pdev->dev,"Chip erase timedout: %x\n" , status); + +dev_dbg (&pdev->dev,"ROM Erase... Done success\n" ); +} + +static bool renesas_download_rom (struct pci_dev *pdev, +const u32 *fw,size_t step) +{ +bool data0_or_data1; +u8 fw_status; +size_t i; +int err; + +/* +* The hardware does alternate between two 32-bit pages. +* (This is because each row of the firmware is 8 bytes). +* +* for even steps we use DATA0, for odd steps DATA1. +*/ + data0_or_data1 = (step &1 ) ==1 ; + +/* Read "Set DATAX" and confirm it is cleared. */ +for (i =0 ; i <RENESAS_RETRY ; i++) { + err =pci_read_config_byte (pdev,RENESAS_ROM_STATUS_MSB , + &fw_status); +if (err) { +dev_err (&pdev->dev,"Read ROM Status failed: %d\n" , +pcibios_err_to_errno (err)); +return false; + } +if (!(fw_status &BIT (data0_or_data1))) +break ; + +udelay (RENESAS_DELAY ); + } +if (i ==RENESAS_RETRY ) { +dev_err (&pdev->dev,"Timeout for Set DATAX step: %zd\n" , step); +return false; + } + +/* +* Write FW data to "DATAX". +* "LSB is left" => force little endian +*/ + err =pci_write_config_dword (pdev, data0_or_data1 ? +RENESAS_DATA1 :RENESAS_DATA0 , + (__force u32 )cpu_to_le32 (fw[step])); +if (err) { +dev_err (&pdev->dev,"Write to DATAX failed: %d\n" , +pcibios_err_to_errno (err)); +return false; + } + +udelay (100 ); + +/* Set "Set DATAX". */
drivers/usb/host/xhci-pci-renesas.c static int renesas_fw_download(struct pci_dev *pdev, · line 502
Quoted 10 lines
drivers/usb/host/xhci-pci-renesas.c +10
-0+ err =pci_write_config_byte (pdev,RENESAS_ROM_STATUS_MSB , +BIT (data0_or_data1)); +if (err) { +dev_err (&pdev->dev,"Write config for DATAX failed: %d\n" , +pcibios_err_to_errno (err)); +return false; + } + +return true; +}
The above function is almost identical to renesas_fw_download_image() added in a previous patch.
To avoid code duplication I'm sure one function that handles both cases would be possible.
-Mathias
Re: [PATCH v10 4/5] usb: renesas-xhci: Add ROM loader for uPD720201
Quoted 30 lines · Mathias Nyman
Quoted 29 lines · Vinod Koul
uPD720201 supports ROM and allows software to program the ROM and boot from it. Add support for detecting if ROM is present, if so load the ROM if not programmed earlier.
Signed-off-by Vinod Koul <[email protected]>Cc Yoshihiro Shimoda <[email protected]>Cc Christian Lamparter <[email protected]>--- drivers/usb/host/xhci-pci-renesas.c | 342 +++++++++++++++++++++++++++- 1 file changed, 341 insertions(+), 1 deletion(-)drivers/usb/host/xhci-pci-renesas.c +10
-0@@ -50,6 +50,22 @@#define RENESAS_RETRY 10000#define RENESAS_DELAY 10 +#define ROM_VALID_01 0x2013 +#define ROM_VALID_02 0x2026 + +static int renesas_verify_fw_version (struct pci_dev *pdev,u32 version) +{ +switch (version) { +case ROM_VALID_01 : +case ROM_VALID_02 : +return 0 ; +default :
Quoted 8 lines
drivers/usb/host/xhci-pci-renesas.c line 66
Quoted 4 lines
drivers/usb/host/xhci-pci-renesas.c +4
-0+dev_err (&pdev->dev,"FW has invalid version :%d\n" , version); +return 1 ; + } +return -EINVAL ;This never returns
-EINVAL
Maybe just get rid of the default case and print
the error message before returning
Correct, this seems to be leftover, have cleaned it up now.
Quoted 57 lines
Quoted 57 lines
drivers/usb/host/xhci-pci-renesas.c +57
-0+static bool renesas_download_rom (struct pci_dev *pdev, +const u32 *fw,size_t step) +{ +bool data0_or_data1; +u8 fw_status; +size_t i; +int err; + +/* +* The hardware does alternate between two 32-bit pages. +* (This is because each row of the firmware is 8 bytes). +* +* for even steps we use DATA0, for odd steps DATA1. +*/ + data0_or_data1 = (step &1 ) ==1 ; + +/* Read "Set DATAX" and confirm it is cleared. */ +for (i =0 ; i <RENESAS_RETRY ; i++) { + err =pci_read_config_byte (pdev,RENESAS_ROM_STATUS_MSB , + &fw_status); +if (err) { +dev_err (&pdev->dev,"Read ROM Status failed: %d\n" , +pcibios_err_to_errno (err)); +return false; + } +if (!(fw_status &BIT (data0_or_data1))) +break ; + +udelay (RENESAS_DELAY ); + } +if (i ==RENESAS_RETRY ) { +dev_err (&pdev->dev,"Timeout for Set DATAX step: %zd\n" , step); +return false; + } + +/* +* Write FW data to "DATAX". +* "LSB is left" => force little endian +*/ + err =pci_write_config_dword (pdev, data0_or_data1 ? +RENESAS_DATA1 :RENESAS_DATA0 , + (__force u32 )cpu_to_le32 (fw[step])); +if (err) { +dev_err (&pdev->dev,"Write to DATAX failed: %d\n" , +pcibios_err_to_errno (err)); +return false; + } + +udelay (100 ); + +/* Set "Set DATAX". */ + err =pci_write_config_byte (pdev,RENESAS_ROM_STATUS_MSB , +BIT (data0_or_data1)); +if (err) { +dev_err (&pdev->dev,"Write config for DATAX failed: %d\n" , +pcibios_err_to_errno (err)); +return false;
Quoted 8 lines
drivers/usb/host/xhci-pci-renesas.c static int renesas_fw_download(struct pci_dev *pdev, · line 502
Quoted 4 lines
drivers/usb/host/xhci-pci-renesas.c +4
-0+ } + +return true; +}The above function is almost identical to
renesas_fw_download_image()added in a previous patch.
To avoid code duplication I'm sure one function that handles both cases would be possible.
The registers are different, but that doesn't mean it can't be done. I have added additional argument for rom and select the register to use (ROM/RAM) and reused the rest of the fn
Thanks
Signature · 1 line
~Vinod
PATCH v10 5/5 usb: xhci: provide a debugfs hook for erasing rom
In reply to Vinod Koulrun "echo 1 > /sys/kernel/debug/renesas-usb/rom_erase" to erase firmware when driver is loaded.
Subsequent init of driver shall reload the firmware
--- drivers/usb/host/xhci-pci-renesas.c | 33 +++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
drivers/usb/host/xhci-pci-renesas.c +33 -0
@@ -2,6 +2,7 @@/* Copyright (C) 2019-2020 Linaro Limited */ #include <linux/acpi.h> +#include <linux/debugfs.h> #include <linux/firmware.h> #include <linux/module.h> #include <linux/pci.h>
@@ -160,6 +161,8 @@ static int renesas_fw_verify(const void *fw_data,return 0 ; } +static void debugfs_init (struct pci_dev *pdev); +static bool renesas_check_rom (struct pci_dev *pdev) {u16 rom_status;
@@ -173,6 +176,7 @@ static bool renesas_check_rom(struct pci_dev *pdev) rom_status &=RENESAS_ROM_STATUS_ROM_EXISTS ;if (rom_status) {dev_dbg (&pdev->dev,"External ROM exists\n" ); +debugfs_init (pdev);return true;/* External ROM exists */ }
@@ -439,6 +443,34 @@ static void renesas_rom_erase(struct pci_dev *pdev)dev_dbg (&pdev->dev,"ROM Erase... Done success\n" ); } +static int debugfs_rom_erase (void *data,u64 value) +{ +struct pci_dev *pdev = data; + +if (value ==1 ) { +dev_dbg (&pdev->dev,"Userspace requested ROM erase\n" ); +renesas_rom_erase (pdev); +return 0 ; + } +return -EINVAL ; +} +DEFINE_DEBUGFS_ATTRIBUTE (rom_erase_ops,NULL , debugfs_rom_erase,"%llu\n" ); + +static struct dentry *debugfs_root; + +static void debugfs_init (struct pci_dev *pdev) +{ + debugfs_root =debugfs_create_dir ("renesas_usb" ,NULL ); + +debugfs_create_file ("rom_erase" ,0200 , debugfs_root, + pdev, &rom_erase_ops); +} + +static void debugfs_exit (void ) +{ +debugfs_remove_recursive (debugfs_root); +} +static bool renesas_download_rom (struct pci_dev *pdev,const u32 *fw,size_t step) {
@@ -690,4 +722,5 @@ int renesas_xhci_check_request_fw(struct pci_dev *pdev,void renesas_xhci_pci_exit (struct pci_dev *dev) { +debugfs_exit (); }
Signature · 1 line
2.25.1