dt-bindings: gpu: add power-domains #cooling-cells to arm,mali-bifrost.yaml
Subsystems (4)
PATCH 1/1 dt-bindings: gpu: add power-domains #cooling-cells to arm,mali-bifrost.yaml
A test with the command below gives this error:
arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: gpu@ff400000:
'#cooling-cells', 'power-domains'
do not match any of the regexes: 'pinctrl-[0-9]+'
With the conversion to yaml it also filters things in a node that are used by other drivers like '#cooling-cells' and 'power-domains'
for Rockchip px30 gpu nodes,
so add them to 'arm,mali-bifrost.yaml'.
make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/ arm,mali-bifrost.yaml
--- Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +6 -0
@@ -43,9 +43,15 @@ properties: operating-points-v2: true + power-domains: + maxItems: 1 + resets: maxItems: 2 + "#cooling-cells": + const: 2 + required: - compatible - reg
Signature · 1 line
2.11.0
Re: [PATCH] dt-bindings: gpu: add power-domains #cooling-cells to arm, mali-bifrost.yaml
Quoted 12 lines · Johan Jonker
A test with the command below gives this error:
arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: gpu@ff400000:
'#cooling-cells', 'power-domains'
do not match any of the regexes: 'pinctrl-[0-9]+'With the conversion to yaml it also filters things in a node that are used by other drivers like '#cooling-cells' and 'power-domains'
for Rockchip px30 gpu nodes,
so add them to 'arm,mali-bifrost.yaml'.
Quoted 9 lines
make ARCH=arm64
dtbs_checkDT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/ arm,mali-bifrost.yamlSigned-off-by Johan Jonker <[email protected]>--- Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
Applied, thanks!