ARM: dts: rockchip: swap clock-names of gpu nodes
Subsystems (2)
PATCH 1/1 ARM: dts: rockchip: swap clock-names of gpu nodes
Dts files with Rockchip 'gpu' nodes were manually verified. In order to automate this process arm,mali-utgard.txt has been converted to yaml. In the new setup dtbs_check with arm,mali-utgard.yaml expects clock-names values
in the same order, so fix that.
Signed-off-by Johan Jonker <[email protected]>
--- arch/arm/boot/dts/rk3036.dtsi | 2 +- arch/arm/boot/dts/rk322x.dtsi | 2 +- arch/arm/boot/dts/rk3xxx.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
arch/arm/boot/dts/rk3036.dtsi +1 -1
@@ -128,7 +128,7 @@ assigned-clocks = <&cru SCLK_GPU>; assigned-clock-rates = <100000000>; clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>; - clock-names = "core", "bus"; + clock-names = "bus", "core"; resets = <&cru SRST_GPU>; status = "disabled"; };
arch/arm/boot/dts/rk322x.dtsi +1 -1
@@ -557,7 +557,7 @@ "pp1", "ppmmu1"; clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>; - clock-names = "core", "bus"; + clock-names = "bus", "core"; resets = <&cru SRST_GPU_A>; status = "disabled"; };
arch/arm/boot/dts/rk3xxx.dtsi +1 -1
@@ -84,7 +84,7 @@ compatible = "arm,mali-400"; reg = <0x10090000 0x10000>; clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>; - clock-names = "core", "bus"; + clock-names = "bus", "core"; assigned-clocks = <&cru ACLK_GPU>; assigned-clock-rates = <100000000>; resets = <&cru SRST_GPU>;
Signature · 1 line
2.11.0
Quoted 9 lines · Johan Jonker
Dts files with Rockchip 'gpu' nodes were manually verified. In order to automate this process arm,mali-utgard.txt has been converted to yaml. In the new setup
dtbs_checkwith arm,mali-utgard.yaml expects clock-names values
in the same order, so fix that.Signed-off-by Johan Jonker <[email protected]>[...]
Applied, thanks!
[1/1] ARM: dts: rockchip: swap clock-names of gpu nodes
commit: b14f3898d2c25a9b47a61fb879d0b1f3af92c59b
Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>