board/qemu: remove the Qemu version from readme.txt
Subsystems (3)
PATCH 1/1 board/qemu: remove the Qemu version from readme.txt
The Qemu version present in readme.txt files was needed when the Buildroot's Qemu defconfig was tested manually using the qemu-system-<arch> binary already present on the host.
This information is now incorrect since we are using host-qemu package, currently at 4.2.0 version, to do a runtime test since 0c7935063851accf3db4c9eb2fc4f11c3da0c391.
For m68k-q800, we can use the upstream qemu since 4.2.0 release [1].
So, remove this line from the readme.txt.
[1] https://www.qemu.org/2019/12/13/qemu-4-2-0/
--- board/qemu/aarch64-virt/readme.txt | 2 -- board/qemu/arm-versatile/readme.txt | 2 -- board/qemu/arm-vexpress-tz/readme.txt | 2 -- board/qemu/arm-vexpress/readme.txt | 2 -- board/qemu/m68k-mcf5208/readme.txt | 2 -- board/qemu/m68k-q800/readme.txt | 3 --- board/qemu/microblazebe-mmu/readme.txt | 2 -- board/qemu/microblazeel-mmu/readme.txt | 2 -- board/qemu/mips32r2-malta/readme.txt | 2 -- board/qemu/mips32r2el-malta/readme.txt | 2 -- board/qemu/mips32r6-malta/readme.txt | 2 -- board/qemu/mips32r6el-malta/readme.txt | 2 -- board/qemu/mips64-malta/readme.txt | 2 -- board/qemu/mips64el-malta/readme.txt | 2 -- board/qemu/mips64r6-malta/readme.txt | 2 -- board/qemu/mips64r6el-malta/readme.txt | 2 -- board/qemu/nios2-10m50/readme.txt | 2 -- board/qemu/or1k/readme.txt | 2 -- board/qemu/ppc-g3beige/readme.txt | 2 -- board/qemu/ppc-mac99/readme.txt | 2 -- board/qemu/ppc-mpc8544ds/readme.txt | 2 -- board/qemu/ppc-virtex-ml507/readme.txt | 2 -- board/qemu/ppc64-e5500/readme.txt | 2 -- board/qemu/ppc64-pseries/readme.txt | 2 -- board/qemu/ppc64le-pseries/readme.txt | 2 -- board/qemu/riscv32-virt/readme.txt | 2 -- board/qemu/riscv64-virt/readme.txt | 2 -- board/qemu/sh4-r2d/readme.txt | 2 -- board/qemu/sh4eb-r2d/readme.txt | 2 -- board/qemu/sparc-ss10/readme.txt | 2 -- board/qemu/sparc64-sun4u/readme.txt | 2 -- board/qemu/x86/readme.txt | 2 -- board/qemu/x86_64/readme.txt | 2 -- board/qemu/xtensa-lx60/readme.txt | 2 -- 34 files changed, 69 deletions(-)
board/qemu/aarch64-virt/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run the emulation with: qemu-system-aarch64 -M virt -cpu cortex-a53 -nographic -smp 1 -kernel output/images/Image -append "rootwait root=/dev/vda console=ttyAMA0" -netdev user,id=eth0 -device virtio-net-device,netdev=eth0 -drive file=output/images/rootfs.ext4,if=none,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 # qemu_aarch64_virt_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 2.12.0
board/qemu/arm-versatile/readme.txt +0 -2
@@ -8,5 +8,3 @@ Or for the noMMU emulation: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. - -Tested with QEMU 2.12.0
board/qemu/arm-vexpress-tz/readme.txt +0 -2
@@ -29,8 +29,6 @@ number of cores. Note: "-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic" brings network support that is used i.e. in OP-TEE regression tests. -Tested with QEMU 2.12.0, and 3.1.0. - -- Boot Details --
board/qemu/arm-vexpress/readme.txt +0 -2
@@ -7,5 +7,3 @@ graphical window is the framebuffer. If you want to emulate more cores change "-smp 1" to "-smp 2" for dual-core or even "smp -4" for a quad-core configuration. - -Tested with QEMU 2.12.0
board/qemu/m68k-mcf5208/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run the emulation with: qemu-system-m68k -M mcf5208evb -cpu m5208 -kernel output/images/vmlinux -nographic # qemu_m68k_mcf5208_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 2.12.0
board/qemu/m68k-q800/readme.txt +0 -3
@@ -3,6 +3,3 @@ Run the emulation with: qemu-system-m68k -M q800 -kernel output/images/vmlinux -nographic -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/sda console=ttyS0" # qemu_m68k_q800_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 2.11.0 from https://github.com/vivier/qemu-m68k -You need following branch: q800-v2.11.0
board/qemu/microblazebe-mmu/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run the emulation with: qemu-system-microblaze -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio # qemu_microblazebe_mmu_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 2.12.0
board/qemu/microblazeel-mmu/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run the emulation with: qemu-system-microblazeel -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio # qemu_microblazeel_mmu_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 2.12.0
board/qemu/mips32r2-malta/readme.txt +0 -2
@@ -5,5 +5,3 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been enabled. - -Tested with QEMU 2.12.0
board/qemu/mips32r2el-malta/readme.txt +0 -2
@@ -5,5 +5,3 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been enabled. - -Tested with QEMU 2.12.0
board/qemu/mips32r6-malta/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run the emulation with: qemu-system-mips -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic # qemu_mips32r6_malta_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 2.12.0
board/qemu/mips32r6el-malta/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run the emulation with: qemu-system-mipsel -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user -nographic # qemu_mips32r6el_malta_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 2.12.0
board/qemu/mips64-malta/readme.txt +0 -2
@@ -4,5 +4,3 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. - -Tested with QEMU 2.12.0
board/qemu/mips64el-malta/readme.txt +0 -2
@@ -4,5 +4,3 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. - -Tested with QEMU 2.12.0
board/qemu/mips64r6-malta/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run the emulation with: qemu-system-mips64 -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic # qemu_mips64r6_malta_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 2.12.0
board/qemu/mips64r6el-malta/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run the emulation with: qemu-system-mips64el -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic # qemu_mips64r6el_malta_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 2.12.0
board/qemu/nios2-10m50/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run the emulation with: qemu-system-nios2 -kernel output/images/vmlinux -nographic # qemu_nios2_10m50_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 2.12.0.
board/qemu/or1k/readme.txt +0 -2
@@ -5,5 +5,3 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. Ethernet support is not working, yet. - -Tested with QEMU 2.12.0.
board/qemu/ppc-g3beige/readme.txt +0 -2
@@ -4,5 +4,3 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. - -Tested with QEMU 2.12.0
board/qemu/ppc-mac99/readme.txt +0 -2
@@ -1,5 +1,3 @@ Run the emulation with: qemu-system-ppc -nographic -vga none -M mac99 -cpu g4 -m 1G -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -net nic,model=sungem -net user -append "root=/dev/sda" # qemu_ppc_mac99_defconfig - -Tested with QEMU 3.1.0
board/qemu/ppc-mpc8544ds/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run the emulation with: qemu-system-ppc -M mpc8544ds -kernel output/images/vmlinux -serial stdio -net nic,model=e1000 -net user # qemu_ppc_mpc8544ds_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 2.12.0
board/qemu/ppc-virtex-ml507/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run the emulation with: qemu-system-ppc -M virtex-ml507 -kernel output/images/vmlinux -m 256 -nographic -append "console=ttyS0" -dtb output/images/virtex440-ml507.dtb # qemu_ppc_virtex_ml507_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 2.12.0
board/qemu/ppc64-e5500/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run the emulation with: qemu-system-ppc64 -M ppce500 -cpu e5500 -m 256 -kernel output/images/uImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "console=ttyS0 rootwait root=/dev/vda" -serial mon:stdio -nographic # qemu_ppc64_e5500_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 2.12.0
board/qemu/ppc64-pseries/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run the emulation with: qemu-system-ppc64 -M pseries -cpu POWER7 -m 256 -kernel output/images/vmlinux -append "console=hvc0 rootwait root=/dev/sda" -drive file=output/images/rootfs.ext2,if=scsi,index=0,format=raw -serial stdio -display curses # qemu_ppc64_pseries_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 2.12.0
board/qemu/ppc64le-pseries/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run the emulation with: qemu-system-ppc64 -M pseries -cpu POWER8 -m 256 -kernel output/images/vmlinux -append "console=hvc0 rootwait root=/dev/sda" -drive file=output/images/rootfs.ext2,if=scsi,index=0,format=raw -serial stdio -display curses # qemu_ppc64le_pseries_defconfig The login prompt will appear in the terminal window. - -Tested with QEMU 2.12.0
board/qemu/riscv32-virt/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run Linux in emulation with: qemu-system-riscv32 -M virt -kernel output/images/fw_jump.elf -device loader,file=output/images/Image,addr=0x80400000 -append "rootwait root=/dev/vda ro" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic # qemu_riscv32_virt_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 3.1
board/qemu/riscv64-virt/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run Linux in emulation with: qemu-system-riscv64 -M virt -kernel output/images/fw_jump.elf -device loader,file=output/images/Image,addr=0x80200000 -append "rootwait root=/dev/vda ro" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic # qemu_riscv64_virt_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 3.1
board/qemu/sh4-r2d/readme.txt +0 -2
@@ -4,5 +4,3 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. - -Tested with QEMU 2.12.0
board/qemu/sh4eb-r2d/readme.txt +0 -2
@@ -4,5 +4,3 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. - -Tested with QEMU 2.12.0
board/qemu/sparc-ss10/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run the emulation with: qemu-system-sparc -M SS-10 -kernel output/images/zImage -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/sda console=ttyS0,115200" -serial stdio -net nic,model=lance -net user # qemu_sparc_ss10_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 2.12.0
board/qemu/sparc64-sun4u/readme.txt +0 -2
@@ -3,5 +3,3 @@ Run the emulation with: qemu-system-sparc64 -M sun4u -kernel output/images/vmlinux -append "rootwait root=/dev/sda console=ttyS0,115200" -serial stdio -drive file=output/images/rootfs.ext2,format=raw -net nic,model=e1000 -net user # qemu_sparc64_sun4u_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 2.12.0
board/qemu/x86/readme.txt +0 -2
@@ -5,5 +5,3 @@ Run the emulation with: Optionally add -smp N to emulate a SMP system with N CPUs. The login prompt will appear in the graphical window. - -Tested with QEMU 2.12.0
board/qemu/x86_64/readme.txt +0 -2
@@ -5,5 +5,3 @@ Run the emulation with: Optionally add -smp N to emulate a SMP system with N CPUs. The login prompt will appear in the graphical window. - -Tested with QEMU 2.12.0
board/qemu/xtensa-lx60/readme.txt +0 -2
@@ -5,5 +5,3 @@ Run the emulation with: qemu-system-xtensa -M lx60 -cpu dc233c -monitor null -nographic -kernel output/images/Image.elf # qemu_xtensa_lx60_nommu_defconfig The login prompt will appear in the terminal that started Qemu. - -Tested with QEMU 2.12.0
Signature · 1 line
2.25.3
Yann E. MORIN
AppliedPATCH 1/1 board/qemu: remove the Qemu version from readme.txt
Romain, All,
On 2020-04-26 12:39 +0200, Romain Naour spake thusly:
Quoted 11 lines
The Qemu version present in readme.txt files was needed when the Buildroot's Qemu defconfig was tested manually using the qemu-system-<arch> binary already present on the host.
This information is now incorrect since we are using host-qemu package, currently at 4.2.0 version, to do a runtime test since
0c7935063851accf3db4c9eb2fc4f11c3da0c391.For m68k-q800, we can use the upstream qemu since 4.2.0 release [1].
Quoted 7 lines
So, remove this line from the readme.txt.
[1] https://www.qemu.org/2019/12/13/qemu-4-2-0/
Signed-off-by Romain Naour <[email protected]>Cc Thomas Petazzoni <[email protected]>Cc Yann E. MORIN <[email protected]>
Applied to master, thanks.
Regards,
Yann E. MORIN.
Quoted 36 lines
--- board/qemu/aarch64-virt/readme.txt | 2 -- board/qemu/arm-versatile/readme.txt | 2 -- board/qemu/arm-vexpress-tz/readme.txt | 2 -- board/qemu/arm-vexpress/readme.txt | 2 -- board/qemu/m68k-mcf5208/readme.txt | 2 -- board/qemu/m68k-q800/readme.txt | 3 --- board/qemu/microblazebe-mmu/readme.txt | 2 -- board/qemu/microblazeel-mmu/readme.txt | 2 -- board/qemu/mips32r2-malta/readme.txt | 2 -- board/qemu/mips32r2el-malta/readme.txt | 2 -- board/qemu/mips32r6-malta/readme.txt | 2 -- board/qemu/mips32r6el-malta/readme.txt | 2 -- board/qemu/mips64-malta/readme.txt | 2 -- board/qemu/mips64el-malta/readme.txt | 2 -- board/qemu/mips64r6-malta/readme.txt | 2 -- board/qemu/mips64r6el-malta/readme.txt | 2 -- board/qemu/nios2-10m50/readme.txt | 2 -- board/qemu/or1k/readme.txt | 2 -- board/qemu/ppc-g3beige/readme.txt | 2 -- board/qemu/ppc-mac99/readme.txt | 2 -- board/qemu/ppc-mpc8544ds/readme.txt | 2 -- board/qemu/ppc-virtex-ml507/readme.txt | 2 -- board/qemu/ppc64-e5500/readme.txt | 2 -- board/qemu/ppc64-pseries/readme.txt | 2 -- board/qemu/ppc64le-pseries/readme.txt | 2 -- board/qemu/riscv32-virt/readme.txt | 2 -- board/qemu/riscv64-virt/readme.txt | 2 -- board/qemu/sh4-r2d/readme.txt | 2 -- board/qemu/sh4eb-r2d/readme.txt | 2 -- board/qemu/sparc-ss10/readme.txt | 2 -- board/qemu/sparc64-sun4u/readme.txt | 2 -- board/qemu/x86/readme.txt | 2 -- board/qemu/x86_64/readme.txt | 2 -- board/qemu/xtensa-lx60/readme.txt | 2 -- 34 files changed, 69 deletions(-)
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'