generic: test per-type quota softlimit enforcement timeout
PATCH v2 1/1 generic: test per-type quota softlimit enforcement timeout
Set different block & inode grace timers for user, group and project quotas, then test softlimit enforcement timeout, make sure different grace timers as expected.
---
Hi,
After generic/594 got merge, I'd like to re-send this case again. It still fails on XFS, but pass on ext4.
V2 add _require_setquota_project
Thanks,
Zorro
common/quota | 4 + tests/generic/597 | 180 ++++++++++++++++++++++++++++++++++++++++++ tests/generic/597.out | 41 ++++++++++ tests/generic/group | 1 + 4 files changed, 226 insertions(+) create mode 100755 tests/generic/597 create mode 100644 tests/generic/597.out
common/quota +4 -0
@@ -217,6 +217,10 @@ _qmount() if [ "$FSTYP" != "xfs" ]; then quotacheck -ug $SCRATCH_MNT >>$seqres.full 2>&1 quotaon -ug $SCRATCH_MNT >>$seqres.full 2>&1 + # try to turn on project quota if it's supported + if quotaon --help 2>&1 | grep -q '\-\-project'; then + quotaon --project $SCRATCH_MNT >>$seqres.full 2>&1 + fi fi chmod ugo+rwx $SCRATCH_MNT }
tests/generic/597 new file +180 -0
180 lines not on this page · raw message
tests/generic/597.out new file +41 -0
41 lines not on this page · raw message
tests/generic/group +1 -0
@@ -598,3 +598,4 @@ 594 auto quick quota 595 auto quick encrypt 596 auto quick +597 auto quick quota
Signature · 1 line
2.20.1
Quoted 11 lines · Zorro Lang
Set different block & inode grace timers for user, group and project quotas, then test softlimit enforcement timeout, make sure different grace timers as expected.
Signed-off-by Zorro Lang <[email protected]>---
Hi,
After generic/594 got merge, I'd like to re-send this case again. It still fails on XFS, but pass on ext4.
Can we get the XFS patch (re)sent upstream, please?
--D
Quoted 273 lines
V2 add
_require_setquota_projectThanks,
Zorrocommon/quota | 4 + tests/generic/597 | 180 ++++++++++++++++++++++++++++++++++++++++++ tests/generic/597.out | 41 ++++++++++ tests/generic/group | 1 + 4 files changed, 226 insertions(+) create mode 100755 tests/generic/597 create mode 100644 tests/generic/597.outcommon/quota +4
-0@@ -217,6 +217,10 @@ _qmount() if [ "$FSTYP" != "xfs" ]; then quotacheck -ug $SCRATCH_MNT >>$seqres.full 2>&1 quotaon -ug $SCRATCH_MNT >>$seqres.full 2>&1 + # try to turn on project quota if it's supported + if quotaon --help 2>&1 | grep -q '\-\-project'; then + quotaon --project $SCRATCH_MNT >>$seqres.full 2>&1 + fi fi chmod ugo+rwx $SCRATCH_MNT }tests/generic/597 new file +180
-0@@ -0,0 +1,180 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test No. 597 +# +# Test per-type(user, group and project) filesystem quota timers, make sure +# enforcement +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + restore_project + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/quota + +# remove previous $seqres.full before test +rm -f $seqres.full + +require_project() +{ + rm -f $tmp.projects $tmp.projid + if [ -f /etc/projects ];then + cat /etc/projects > $tmp.projects + fi + if [ -f /etc/projid ];then + cat /etc/projid > $tmp.projid + fi + + cat >/etc/projects <<EOF +100:$SCRATCH_MNT/t +EOF + cat >/etc/projid <<EOF +$qa_user:100 +EOF + PROJECT_CHANGED=1 +} + +restore_project() +{ + if [ "$PROJECT_CHANGED" = "1" ];then + rm -f /etc/projects /etc/projid + if [ -f $tmp.projects ];then + cat $tmp.projects > /etc/projects + fi + if [ -f $tmp.projid ];then + cat $tmp.projid > /etc/projid + fi + fi +} + +init_files() +{ + local dir=$1 + + echo "### Initialize files, and their mode and ownership" + touch $dir/file{1,2} 2>/dev/null + chown $qa_user $dir/file{1,2} 2>/dev/null + chgrp $qa_user $dir/file{1,2} 2>/dev/null + chmod 777 $dir 2>/dev/null +} + +cleanup_files() +{ + echo "### Remove all files" + rm -f ${1}/file{1,2,3,4,5,6} +} + +test_grace() +{ + local type=$1 + local dir=$2 + local bgrace=$3 + local igrace=$4 + + init_files $dir + echo "--- Test block quota ---" + # Firstly fit below block soft limit + echo "Write 225 blocks..." + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((225 * $BLOCK_SIZE))' \ + -c fsync $dir/file1" 2>&1 >>$seqres.full | \ + _filter_xfs_io_error | tee -a $seqres.full + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 + # Secondly overcome block soft limit + echo "Rewrite 250 blocks plus 1 byte, over the block softlimit..." + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((250 * $BLOCK_SIZE + 1))' \ + -c fsync $dir/file1" 2>&1 >>$seqres.full | \ + _filter_xfs_io_error | tee -a $seqres.full + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 + # Reset grace time here, make below grace time test more accurate + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null + # Now sleep enough grace time and check that softlimit got enforced + sleep $((bgrace + 1)) + echo "Try to write 1 one more block after grace..." + su $qa_user -c "$XFS_IO_PROG -c 'truncate 0' -c 'pwrite 0 $BLOCK_SIZE' \ + $dir/file2" 2>&1 >>$seqres.full | _filter_xfs_io_error | \ + tee -a $seqres.full + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 + echo "--- Test inode quota ---" + # And now the softlimit test for inodes + # First reset space limits so that we don't have problems with + # space reservations on XFS + setquota -$type $qa_user 0 0 3 100 $SCRATCH_MNT + echo "Create 2 more files, over the inode softlimit..." + su $qa_user -c "touch $dir/file3 $dir/file4" 2>&1 >>$seqres.full | \ + _filter_scratch | tee -a $seqres.full + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 + # Reset grace time here, make below grace time test more accurate + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null + # Wait and check grace time enforcement + sleep $((igrace+1)) + echo "Try to create one more inode after grace..." + su $qa_user -c "touch $dir/file5" 2>&1 >>$seqres.full | + _filter_scratch | tee -a $seqres.full + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 + cleanup_files $dir +} + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_scratch +_require_setquota_project +_require_quota +_require_user +_require_group + +_scratch_mkfs >$seqres.full 2>&1 +_scratch_enable_pquota +_qmount_option "usrquota,grpquota,prjquota" +_qmount +_require_prjquota $SCRATCH_DEV +BLOCK_SIZE=$(_get_file_block_size $SCRATCH_MNT) +rm -rf $SCRATCH_MNT/t +mkdir $SCRATCH_MNT/t +$XFS_IO_PROG -r -c "chproj 100" -c "chattr +P" $SCRATCH_MNT/t +require_project + +echo "### Set up different grace timers to each type of quota" +UBGRACE=12 +UIGRACE=10 +GBGRACE=4 +GIGRACE=2 +PBGRACE=8 +PIGRACE=6 + +setquota -u $qa_user $((250 * $BLOCK_SIZE / 1024)) \ + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT +setquota -u -t $UBGRACE $UIGRACE $SCRATCH_MNT +setquota -g $qa_user $((250 * $BLOCK_SIZE / 1024)) \ + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT +setquota -g -t $GBGRACE $GIGRACE $SCRATCH_MNT +setquota -P $qa_user $((250 * $BLOCK_SIZE / 1024)) \ + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT +setquota -P -t $PBGRACE $PIGRACE $SCRATCH_MNT + +echo; echo "### Test user quota softlimit and grace time" +test_grace u $SCRATCH_MNT $UBGRACE $UIGRACE +echo; echo "### Test group quota softlimit and grace time" +test_grace g $SCRATCH_MNT $GBGRACE $GIGRACE +echo; echo "### Test project quota softlimit and grace time" +test_grace P $SCRATCH_MNT/t $PBGRACE $PIGRACE + +# success, all done +status=0 +exittests/generic/597.out new file +41
-0@@ -0,0 +1,41 @@ +QA output created by 597 +### Set up different grace timers to each type of quota + +### Test user quota softlimit and grace time +### Initialize files, and their mode and ownership +--- Test block quota --- +Write 225 blocks... +Rewrite 250 blocks plus 1 byte, over the block softlimit... +Try to write 1 one more block after grace... +pwrite: Disk quota exceeded +--- Test inode quota --- +Create 2 more files, over the inode softlimit... +Try to create one more inode after grace... +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded +### Remove all files + +### Test group quota softlimit and grace time +### Initialize files, and their mode and ownership +--- Test block quota --- +Write 225 blocks... +Rewrite 250 blocks plus 1 byte, over the block softlimit... +Try to write 1 one more block after grace... +pwrite: Disk quota exceeded +--- Test inode quota --- +Create 2 more files, over the inode softlimit... +Try to create one more inode after grace... +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded +### Remove all files + +### Test project quota softlimit and grace time +### Initialize files, and their mode and ownership +--- Test block quota --- +Write 225 blocks... +Rewrite 250 blocks plus 1 byte, over the block softlimit... +Try to write 1 one more block after grace... +pwrite: Disk quota exceeded +--- Test inode quota --- +Create 2 more files, over the inode softlimit... +Try to create one more inode after grace... +touch: cannot touch 'SCRATCH_MNT/t/file5': Disk quota exceeded +### Remove all filestests/generic/group +1
-0@@ -598,3 +598,4 @@ 594 auto quick quota 595 auto quick encrypt 596 auto quick +597 auto quick quotaSignature · 1 line
2.20.1
Quoted 8 lines · Darrick J. Wong
Quoted 7 lines · Zorro Lang
Set different block & inode grace timers for user, group and project quotas, then test softlimit enforcement timeout, make sure different grace timers as expected.
Signed-off-by Zorro Lang <[email protected]>---
Quoted 6 lines
Quoted 4 lines
Hi,
After generic/594 got merge, I'd like to re-send this case again. It still fails on XFS, but pass on ext4.
Can we get the XFS patch (re)sent upstream, please?
Hi Darrick,
After talking with Eric, I'll take this half-finished job. I'll fix some bugs and change something and re-send patches(From Eric) again. I'll take a few time, due to there're still some problems.
Thanks,
Zorro
Quoted 277 lines
--D
Quoted 273 lines
V2 add
_require_setquota_projectThanks,
Zorrocommon/quota | 4 + tests/generic/597 | 180 ++++++++++++++++++++++++++++++++++++++++++ tests/generic/597.out | 41 ++++++++++ tests/generic/group | 1 + 4 files changed, 226 insertions(+) create mode 100755 tests/generic/597 create mode 100644 tests/generic/597.outcommon/quota +4
-0@@ -217,6 +217,10 @@ _qmount() if [ "$FSTYP" != "xfs" ]; then quotacheck -ug $SCRATCH_MNT >>$seqres.full 2>&1 quotaon -ug $SCRATCH_MNT >>$seqres.full 2>&1 + # try to turn on project quota if it's supported + if quotaon --help 2>&1 | grep -q '\-\-project'; then + quotaon --project $SCRATCH_MNT >>$seqres.full 2>&1 + fi fi chmod ugo+rwx $SCRATCH_MNT }tests/generic/597 new file +180
-0@@ -0,0 +1,180 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test No. 597 +# +# Test per-type(user, group and project) filesystem quota timers, make sure +# enforcement +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + restore_project + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/quota + +# remove previous $seqres.full before test +rm -f $seqres.full + +require_project() +{ + rm -f $tmp.projects $tmp.projid + if [ -f /etc/projects ];then + cat /etc/projects > $tmp.projects + fi + if [ -f /etc/projid ];then + cat /etc/projid > $tmp.projid + fi + + cat >/etc/projects <<EOF +100:$SCRATCH_MNT/t +EOF + cat >/etc/projid <<EOF +$qa_user:100 +EOF + PROJECT_CHANGED=1 +} + +restore_project() +{ + if [ "$PROJECT_CHANGED" = "1" ];then + rm -f /etc/projects /etc/projid + if [ -f $tmp.projects ];then + cat $tmp.projects > /etc/projects + fi + if [ -f $tmp.projid ];then + cat $tmp.projid > /etc/projid + fi + fi +} + +init_files() +{ + local dir=$1 + + echo "### Initialize files, and their mode and ownership" + touch $dir/file{1,2} 2>/dev/null + chown $qa_user $dir/file{1,2} 2>/dev/null + chgrp $qa_user $dir/file{1,2} 2>/dev/null + chmod 777 $dir 2>/dev/null +} + +cleanup_files() +{ + echo "### Remove all files" + rm -f ${1}/file{1,2,3,4,5,6} +} + +test_grace() +{ + local type=$1 + local dir=$2 + local bgrace=$3 + local igrace=$4 + + init_files $dir + echo "--- Test block quota ---" + # Firstly fit below block soft limit + echo "Write 225 blocks..." + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((225 * $BLOCK_SIZE))' \ + -c fsync $dir/file1" 2>&1 >>$seqres.full | \ + _filter_xfs_io_error | tee -a $seqres.full + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 + # Secondly overcome block soft limit + echo "Rewrite 250 blocks plus 1 byte, over the block softlimit..." + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((250 * $BLOCK_SIZE + 1))' \ + -c fsync $dir/file1" 2>&1 >>$seqres.full | \ + _filter_xfs_io_error | tee -a $seqres.full + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 + # Reset grace time here, make below grace time test more accurate + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null + # Now sleep enough grace time and check that softlimit got enforced + sleep $((bgrace + 1)) + echo "Try to write 1 one more block after grace..." + su $qa_user -c "$XFS_IO_PROG -c 'truncate 0' -c 'pwrite 0 $BLOCK_SIZE' \ + $dir/file2" 2>&1 >>$seqres.full | _filter_xfs_io_error | \ + tee -a $seqres.full + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 + echo "--- Test inode quota ---" + # And now the softlimit test for inodes + # First reset space limits so that we don't have problems with + # space reservations on XFS + setquota -$type $qa_user 0 0 3 100 $SCRATCH_MNT + echo "Create 2 more files, over the inode softlimit..." + su $qa_user -c "touch $dir/file3 $dir/file4" 2>&1 >>$seqres.full | \ + _filter_scratch | tee -a $seqres.full + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 + # Reset grace time here, make below grace time test more accurate + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null + # Wait and check grace time enforcement + sleep $((igrace+1)) + echo "Try to create one more inode after grace..." + su $qa_user -c "touch $dir/file5" 2>&1 >>$seqres.full | + _filter_scratch | tee -a $seqres.full + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 + cleanup_files $dir +} + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_scratch +_require_setquota_project +_require_quota +_require_user +_require_group + +_scratch_mkfs >$seqres.full 2>&1 +_scratch_enable_pquota +_qmount_option "usrquota,grpquota,prjquota" +_qmount +_require_prjquota $SCRATCH_DEV +BLOCK_SIZE=$(_get_file_block_size $SCRATCH_MNT) +rm -rf $SCRATCH_MNT/t +mkdir $SCRATCH_MNT/t +$XFS_IO_PROG -r -c "chproj 100" -c "chattr +P" $SCRATCH_MNT/t +require_project + +echo "### Set up different grace timers to each type of quota" +UBGRACE=12 +UIGRACE=10 +GBGRACE=4 +GIGRACE=2 +PBGRACE=8 +PIGRACE=6 + +setquota -u $qa_user $((250 * $BLOCK_SIZE / 1024)) \ + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT +setquota -u -t $UBGRACE $UIGRACE $SCRATCH_MNT +setquota -g $qa_user $((250 * $BLOCK_SIZE / 1024)) \ + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT +setquota -g -t $GBGRACE $GIGRACE $SCRATCH_MNT +setquota -P $qa_user $((250 * $BLOCK_SIZE / 1024)) \ + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT +setquota -P -t $PBGRACE $PIGRACE $SCRATCH_MNT + +echo; echo "### Test user quota softlimit and grace time" +test_grace u $SCRATCH_MNT $UBGRACE $UIGRACE +echo; echo "### Test group quota softlimit and grace time" +test_grace g $SCRATCH_MNT $GBGRACE $GIGRACE +echo; echo "### Test project quota softlimit and grace time" +test_grace P $SCRATCH_MNT/t $PBGRACE $PIGRACE + +# success, all done +status=0 +exittests/generic/597.out new file +41
-0@@ -0,0 +1,41 @@ +QA output created by 597 +### Set up different grace timers to each type of quota + +### Test user quota softlimit and grace time +### Initialize files, and their mode and ownership +--- Test block quota --- +Write 225 blocks... +Rewrite 250 blocks plus 1 byte, over the block softlimit... +Try to write 1 one more block after grace... +pwrite: Disk quota exceeded +--- Test inode quota --- +Create 2 more files, over the inode softlimit... +Try to create one more inode after grace... +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded +### Remove all files + +### Test group quota softlimit and grace time +### Initialize files, and their mode and ownership +--- Test block quota --- +Write 225 blocks... +Rewrite 250 blocks plus 1 byte, over the block softlimit... +Try to write 1 one more block after grace... +pwrite: Disk quota exceeded +--- Test inode quota --- +Create 2 more files, over the inode softlimit... +Try to create one more inode after grace... +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded +### Remove all files + +### Test project quota softlimit and grace time +### Initialize files, and their mode and ownership +--- Test block quota --- +Write 225 blocks... +Rewrite 250 blocks plus 1 byte, over the block softlimit... +Try to write 1 one more block after grace... +pwrite: Disk quota exceeded +--- Test inode quota --- +Create 2 more files, over the inode softlimit... +Try to create one more inode after grace... +touch: cannot touch 'SCRATCH_MNT/t/file5': Disk quota exceeded +### Remove all filestests/generic/group +1
-0@@ -598,3 +598,4 @@ 594 auto quick quota 595 auto quick encrypt 596 auto quick +597 auto quick quotaSignature · 1 line
2.20.1