input: update max sizes after setting to absolute mode
Subsystems (2)
PATCH 1/1 input: update max sizes after setting to absolute mode
x_max/y_max values change after we populate info struct. Using old values causes y scroll to be half of the size of pad area. Updating these values fixes that problem. This problem affects firmware 0x450f00 at least.
Signed-off-by Kutay Uner <[email protected]>
---
drivers/input/mouse/elantech.c +16 -0
@@ -1944,6 +1944,22 @@ static int elantech_setup_ps2(struct psmouse *psmouse, goto init_fail; } +/* elantech_set_absolute_mode(?) causes x_max/y_max to change +* at least on models using this fw. Workaround that by requerying +* and setting those values at both info struct to be safe. +*/ +if (info->fw_version ==0x450f00 ) { +unsigned char param[3 ]; + +if (info->send_cmd (psmouse,ETP_FW_ID_QUERY , param)) + goto init_fail; + + info->x_max = (0x0f & param[0 ]) <<8 | param[1 ]; + info->y_max = (0xf0 & param[0 ]) <<4 | param[2 ]; + etd->info.x_max = info->x_max; + etd->info.y_max = info->y_max; + } +if (info->fw_version ==0x381f17 ) { etd->original_set_rate = psmouse->set_rate; psmouse->set_rate = elantech_set_rate_restore_reg_07;