arm: caches: allow to activate dcache in SPL and in U-Boot pre-reloc
v2 cover arm: caches: allow to activate dcache in SPL and in U-Boot pre-reloc
Hi
It is a V2 serie after Marek feedback for
http://patchwork.ozlabs.org/project/uboot/list/?series=168378
This serie allows dcache activation in SPL or in U-Boot preloc stage for ARM board.
See "arm: stm32mp1: activate data cache in SPL and before relocation" for example of usage in SPL and in U-Boot pre-reloc of the function dcache_enable() and of mmu_set_region_dcache_behaviour().
A branch named "dcache" with the needed patches for stm32mp1 boards is available in:
https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git
Changes in v2:
- update patch after Marek's proposal. but I just divided by 2 instead of 4kB (minimal MMU page size)
Patrick Delaunay (3):
arm: caches: protect dram_bank_mmu_setup access to bi_dram
arm: caches: add DCACHE_DEFAULT_OPTION
arm: caches: manage phys_addr_t overflow in
mmu_set_region_dcache_behaviour
arch/arm/include/asm/system.h | 8 ++++++++ arch/arm/lib/cache-cp15.c | 20 ++++++++++---------- 2 files changed, 18 insertions(+), 10 deletions(-)
Signature · 1 line
2.17.1
PATCH v2 1/3 arm: caches: protect dram_bank_mmu_setup access to bi_dram
Add protection in dram_bank_mmu_setup() to avoid access to bd->bi_dram before relocation.
This patch allow to use the generic weak function dram_bank_mmu_setup to activate the MMU and the data cache in SPL or in U-Boot before relocation, when bd->bi_dram is not yet initialized.
In this cases, the MMU must be initialized explicitly with mmu_set_region_dcache_behaviour function.
---
Changes in v2: None
arch/arm/lib/cache-cp15.c | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/lib/cache-cp15.c +4 -0
@@ -91,6 +91,10 @@ __weak void dram_bank_mmu_setup(int bank)bd_t *bd = gd->bd;int i; +/* bd->bi_dram is available only after relocation */ +if ((gd->flags &GD_FLG_RELOC ) ==0 ) +return ; +debug ("%s: bank: %d\n" , __func__, bank); for (i = bd->bi_dram[bank].start >> MMU_SECTION_SHIFT; i < (bd->bi_dram[bank].start >> MMU_SECTION_SHIFT) +
Signature · 1 line
2.17.1
PATCH v2 1/3 arm: caches: protect dram_bank_mmu_setup access to bi_dram
Quoted 11 lines · Patrick Delaunay
Add protection in
dram_bank_mmu_setup()to avoid access tobd->bi_drambefore relocation.This patch allow to use the generic weak function
dram_bank_mmu_setupto activate the MMU and the data cache in SPL or in U-Boot before relocation, whenbd->bi_dramis not yet initialized.In this cases, the MMU must be initialized explicitly with
mmu_set_region_dcache_behaviourfunction.Signed-off-by Patrick Delaunay <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200501/1dc99cc4/attachment.sig>
PATCH v2 2/3 arm: caches: add DCACHE_DEFAULT_OPTION
In reply to Patrick DelaunayAdd the new flags DCACHE_DEFAULT_OPTION to define the default option to use according the compilation flags CONFIG_SYS_ARM_CACHE_*.
This new compilation flag allows to simplify dram_bank_mmu_setup() and can be used as third parameter (option=dcache option to select) of mmu_set_region_dcache_behaviour function.
---CONFIG_SYS_ARM_CACHE_WRITEBACK dependency with [v2] configs: migrate CONFIG_SYS_ARM_CACHE_* in Kconfig
http://patchwork.ozlabs.org/patch/1269103/
Changes in v2: None
arch/arm/include/asm/system.h | 8 ++++++++ arch/arm/lib/cache-cp15.c | 11 ++--------- 2 files changed, 10 insertions(+), 9 deletions(-)
arch/arm/include/asm/system.h +8 -0
@@ -485,6 +485,14 @@ enum dcache_option { };#endif +#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH ) +#define DCACHE_DEFAULT_OPTION DCACHE_WRITETHROUGH +#elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC ) +#define DCACHE_DEFAULT_OPTION DCACHE_WRITEALLOC +#elif defined(CONFIG_SYS_ARM_CACHE_WRITEBACK ) +#define DCACHE_DEFAULT_OPTION DCACHE_WRITEBACK +#endif +/* Size of an MMU section */ enum {#ifdef CONFIG_ARMV7_LPAE
arch/arm/lib/cache-cp15.c +2 -9
@@ -99,15 +99,8 @@ __weak void dram_bank_mmu_setup(int bank)for (i = bd->bi_dram[bank].start >>MMU_SECTION_SHIFT ; i < (bd->bi_dram[bank].start >>MMU_SECTION_SHIFT ) + (bd->bi_dram[bank].size >>MMU_SECTION_SHIFT ); - i++) { -#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH ) -set_section_dcache (i,DCACHE_WRITETHROUGH ); -#elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC ) -set_section_dcache (i,DCACHE_WRITEALLOC ); -#else -set_section_dcache (i,DCACHE_WRITEBACK ); -#endif - } + i++) +set_section_dcache (i,DCACHE_DEFAULT_OPTION ); }/* to activate the MMU we need to set up virtual memory: use 1M areas */
Signature · 1 line
2.17.1
PATCH v2 2/3 arm: caches: add DCACHE_DEFAULT_OPTION
Quoted 9 lines · Patrick Delaunay
Add the new flags
DCACHE_DEFAULT_OPTIONto define the default option to use according the compilation flags CONFIG_SYS_ARM_CACHE_*.This new compilation flag allows to simplify
dram_bank_mmu_setup()and can be used as third parameter (option=dcache option to select) ofmmu_set_region_dcache_behaviourfunction.Signed-off-by Patrick Delaunay <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200501/0d12076a/attachment.sig>
PATCH v2 3/3 arm: caches: manage phys_addr_t overflow in mmu_set_region_dcache_behaviour
In reply to Patrick DelaunaySolved the overflow on phys_addr_t type for start + size in mmu_set_region_dcache_behaviour() function.
This overflow is avoided by dividing start and end by 2 before addition, and we only expecting that start and size are even.
This patch doesn't change the current function behavior if the parameters (start or size) are not aligned on MMU_SECTION_SIZE.
For example, this overflow occurs on ARM32 with:
start = 0xC0000000 and size = 0x40000000
then start + size = 0x100000000 and end = 0x0.
For information the function behavior change with risk of regression, if we just shift start and size before the addition. Example with 2MB section size:
MMU_SECTION_SIZE 0x200000 and MMU_SECTION_SHIFT = 21 with start = 0x1000000, size = 0x1000000,
- with the proposed patch, start = 0 and end = 0x1 as previously
- with the more simple patch:
end = (start >> MMU_SECTION_SHIFT) + (size >> MMU_SECTION_SHIFT) the value of end change:
start >> 21 = 0, size >> 21 = 0 and end = 0x0 !!!
---
Changes in v2:
- update patch after Marek's proposal. but I just divided by 2 instead of 4kB (minimal MMU page size)
arch/arm/lib/cache-cp15.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
arch/arm/lib/cache-cp15.c +4 -1
@@ -61,8 +61,11 @@ void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,unsigned long startpt, stoppt;unsigned long upto, end; - end =ALIGN (start + size,MMU_SECTION_SIZE ) >>MMU_SECTION_SHIFT ; +/* div by 2 before start + size to avoid phys_addr_t overflow */ + end =ALIGN ((start /2 ) + (size /2 ),MMU_SECTION_SIZE /2 ) + >> (MMU_SECTION_SHIFT -1 ); start = start >>MMU_SECTION_SHIFT ; +#ifdef CONFIG_ARMV7_LPAE debug ("%s: start=%pa, size=%zu, option=%llx\n" , __func__, &start, size, option);
Signature · 1 line
2.17.1
PATCH v2 3/3 arm: caches: manage phys_addr_t overflow in mmu_set_region_dcache_behaviour
Quoted 24 lines · Patrick Delaunay
Solved the overflow on
phys_addr_ttype for start + size inmmu_set_region_dcache_behaviour()function.This overflow is avoided by dividing start and end by 2 before addition, and we only expecting that start and size are even.
This patch doesn't change the current function behavior if the parameters (start or size) are not aligned on
MMU_SECTION_SIZE.For example, this overflow occurs on ARM32 with:
start =0xC0000000and size =0x40000000
then start + size =0x100000000and end =0x0.For information the function behavior change with risk of regression, if we just shift start and size before the addition. Example with 2MB section size:
MMU_SECTION_SIZE0x200000andMMU_SECTION_SHIFT= 21 with start =0x1000000, size =0x1000000,
- with the proposed patch, start = 0 and end =0x1as previously
- with the more simple patch:
end = (start >>MMU_SECTION_SHIFT) + (size >>MMU_SECTION_SHIFT) the value of end change:
start >> 21 = 0, size >> 21 = 0 and end =0x0!!!
Quoted 1 line
Signed-off-by Patrick Delaunay <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200501/c41619c2/attachment.sig>
v2 cover arm: caches: allow to activate dcache in SPL and in U-Boot pre-reloc
In reply to Patrick DelaunayQuoted 28 lines · Patrick Delaunay
Hi
It is a V2 serie after Marek feedback for
http://patchwork.ozlabs.org/project/uboot/list/?series=168378This serie allows dcache activation in SPL or in U-Boot preloc stage for ARM board.
See "arm: stm32mp1: activate data cache in SPL and before relocation" for example of usage in SPL and in U-Boot pre-reloc of the function
dcache_enable()and ofmmu_set_region_dcache_behaviour().A branch named "dcache" with the needed patches for stm32mp1 boards is available in:
https://gitlab.denx.de/u-boot/custodians/u-boot-stm.gitChanges in v2:
- update patch after Marek's proposal. but I just divided by 2 instead of 4kB (minimal MMU page size)Patrick Delaunay (3):
arm: caches: protectdram_bank_mmu_setupaccess tobi_dram
arm: caches: addDCACHE_DEFAULT_OPTION
arm: caches: managephys_addr_toverflow in
mmu_set_region_dcache_behaviour
Quoted 3 lines
arch/arm/include/asm/system.h | 8 ++++++++ arch/arm/lib/cache-cp15.c | 20 ++++++++++---------- 2 files changed, 18 insertions(+), 10 deletions(-)
All in all, I like it, good work. I'll pick it up not right now but before -rc2. Thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200428/b08d7ad8/attachment.sig>