Skip to contentSkip to conversation

i.MX fixes for 5.7

GIT PULL Shawn Guo 1 participant 1 message Apr 29, 2020

lore
Share & tools
lore

Shawn Guo

author
#0 lore raw

The following changes since commit 8f3d9f354286745c751374f5f1fcafee6b3f3136:

Linux 5.7-rc1 (2020-04-12 12:35:55 -0700)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-5.7

for you to fetch changes up to 1248c86fd6391c63da947718bbd43686fa95185f:

arm64: dts: freescale: imx8mp: update input_val for AUDIOMIX_BIT_STREAM (2020-04-29 11:30:32 +0800)

----------------------------------------------------------------
i.MX fixes for 5.7:

- Set correct AHB clock for i.MX8MN SDMA1 device to fix a "Timeout waiting for CH0" error.
- Fix a linker error for i.MX6 configurations that have ARM_CPU_SUSPEND=n, which can happen if neither CONFIG_PM, CONFIG_CPU_IDLE, nor ARM_PSCI_FW are selected.
- Fix I2C1 pinctrl configuration for i.MX27 phytec-phycard board.
- Fix i.MX8M AIPS 'reg' properties to remove DTC simple_bus_reg warnings.
- Add missing compatible "fsl,vf610-edma" for LS1028A EDMA device, so that bootloader can fix up the IOMMU entries there. Otherwise, EDMA just doesn't work on LS1028A with shipped bootloader.
- Fix imx6dl-yapp4-ursa board Ethernet connection.
- Fix input_val for AUDIOMIX_BIT_STREAM pinctrl defines on i.MX8MP according to Reference Manual.

----------------------------------------------------------------
Adam Ford (1):
arm64: dts: imx8mn: Change SDMA1 ahb clock for imx8mn

Ahmad Fatoum (1):
ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=y

Fabio Estevam (2):
ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entries
arm64: dts: imx8m: Fix AIPS reg properties

Michael Walle (2):
dt-bindings: dma: fsl-edma: fix ls1028a-edma compatible
arm64: dts: ls1028a: add "fsl,vf610-edma" compatible

Michal Vokáč (1):
ARM: dts: imx6dl-yapp4: Fix Ursa board Ethernet connection

Shengjiu Wang (1):
arm64: dts: freescale: imx8mp: update input_val for AUDIOMIX_BIT_STREAM

 Documentation/devicetree/bindings/dma/fsl-edma.txt |  3 +-
 arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts   |  4 +-
 arch/arm/boot/dts/imx6dl-yapp4-ursa.dts            |  2 +-
 arch/arm/mach-imx/Makefile                         |  2 +
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi     |  2 +-
 arch/arm64/boot/dts/freescale/imx8mm.dtsi          |  8 ++--
 arch/arm64/boot/dts/freescale/imx8mn.dtsi          | 10 ++---
 arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h     | 46 +++++++++++-----------
 arch/arm64/boot/dts/freescale/imx8mp.dtsi          |  6 +--
 arch/arm64/boot/dts/freescale/imx8mq.dtsi          |  8 ++--
 10 files changed, 47 insertions(+), 44 deletions(-)

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel