Skip to contentSkip to conversation

stmmac: intel: Fix clock handling on error and remove paths

PATCH In review Andy Shevchenko 2 participants 7 messages Apr 29, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/6 stmmac: intel: Fix clock handling on error and remove paths

clk_prepare_enable() might fail, we have to check its returned value. Besides that we have to call clk_disable_unprepare() on the error and remove paths. Do above in the dwmac-intel driver.

While at it, remove leftover in stmmac_pci and remove unneeded condition for NULL-aware clk_unregister_fixed_rate() call.

---
v2: properly disable and unprepare clock on error path and remove

 .../net/ethernet/stmicro/stmmac/dwmac-intel.c | 20 +++++++++++++++----
 .../net/ethernet/stmicro/stmmac/stmmac_pci.c  |  5 -----
 2 files changed, 16 insertions(+), 9 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c +16 -4
index 2e4aaedb93f580..d163c4b43da0fd 100644
@@ -252,6 +252,7 @@ static void common_default_data(struct plat_stmmacenet_data *plat)
 static int intel_mgbe_common_data(struct pci_dev *pdev,
 				  struct plat_stmmacenet_data *plat)
 {
+	int ret;
 	int i;
 
 	plat->clk_csr = 5;
@@ -324,7 +325,12 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
 		dev_warn(&pdev->dev, "Fail to register stmmac-clk\n");
 		plat->stmmac_clk = NULL;
 	}
-	clk_prepare_enable(plat->stmmac_clk);
+
+	ret = clk_prepare_enable(plat->stmmac_clk);
+	if (ret) {
+		clk_unregister_fixed_rate(plat->stmmac_clk);
+		return ret;
+	}
 
 	/* Set default value for multicast hash bins */
 	plat->multicast_filter_bins = HASH_TABLE_SIZE;
@@ -657,7 +663,13 @@ static int intel_eth_pci_probe(struct pci_dev *pdev,
 	res.wol_irq = pdev->irq;
 	res.irq = pdev->irq;
 
-	return stmmac_dvr_probe(&pdev->dev, plat, &res);
+	ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
+	if (ret) {
+		clk_disable_unprepare(plat->stmmac_clk);
+		clk_unregister_fixed_rate(plat->stmmac_clk);
+	}
+
+	return ret;
 }
 
 /**
@@ -675,8 +687,8 @@ static void intel_eth_pci_remove(struct pci_dev *pdev)
 
 	stmmac_dvr_remove(&pdev->dev);
 
-	if (priv->plat->stmmac_clk)
-		clk_unregister_fixed_rate(priv->plat->stmmac_clk);
+	clk_disable_unprepare(priv->plat->stmmac_clk);
+	clk_unregister_fixed_rate(priv->plat->stmmac_clk);
 
 	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		if (pci_resource_len(pdev, i) == 0)
drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +0 -5
index 3fb21f7ac9fbee..272cb47af9f2ea 100644
@@ -217,15 +217,10 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
  */
 static void stmmac_pci_remove(struct pci_dev *pdev)
 {
-	struct net_device *ndev = dev_get_drvdata(&pdev->dev);
-	struct stmmac_priv *priv = netdev_priv(ndev);
 	int i;
 
 	stmmac_dvr_remove(&pdev->dev);
 
-	if (priv->plat->stmmac_clk)
-		clk_unregister_fixed_rate(priv->plat->stmmac_clk);
-
 	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		if (pci_resource_len(pdev, i) == 0)
 			continue;
Signature · 1 line
2.26.2
#1 lore raw

PATCH v2 2/6 stmmac: intel: Remove unnecessary loop for PCI BARs

Copy'n'paste without thinking is not a good idea and in this case it brought unnecessary loop over PCI BAR resources which was needed to workaround one of STMicro RVP boards. Remove unnecessary loops from Intel driver.

---
v2: no changes

 .../net/ethernet/stmicro/stmmac/dwmac-intel.c | 23 ++++---------------
 1 file changed, 5 insertions(+), 18 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c +5 -18
index d163c4b43da0fd..e9f94855949959 100644
@@ -606,7 +606,6 @@ static int intel_eth_pci_probe(struct pci_dev *pdev,
 	struct intel_priv_data *intel_priv;
 	struct plat_stmmacenet_data *plat;
 	struct stmmac_resources res;
-	int i;
 	int ret;
 
 	intel_priv = devm_kzalloc(&pdev->dev, sizeof(*intel_priv),
@@ -637,15 +636,9 @@ static int intel_eth_pci_probe(struct pci_dev *pdev,
 		return ret;
 	}
 
-	/* Get the base address of device */
-	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
-		if (pci_resource_len(pdev, i) == 0)
-			continue;
-		ret = pcim_iomap_regions(pdev, BIT(i), pci_name(pdev));
-		if (ret)
-			return ret;
-		break;
-	}
+	ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
+	if (ret)
+		return ret;
 
 	pci_set_master(pdev);
 
@@ -659,7 +652,7 @@ static int intel_eth_pci_probe(struct pci_dev *pdev,
 	pci_enable_msi(pdev);
 
 	memset(&res, 0, sizeof(res));
-	res.addr = pcim_iomap_table(pdev)[i];
+	res.addr = pcim_iomap_table(pdev)[0];
 	res.wol_irq = pdev->irq;
 	res.irq = pdev->irq;
 
@@ -683,19 +676,13 @@ static void intel_eth_pci_remove(struct pci_dev *pdev)
 {
 	struct net_device *ndev = dev_get_drvdata(&pdev->dev);
 	struct stmmac_priv *priv = netdev_priv(ndev);
-	int i;
 
 	stmmac_dvr_remove(&pdev->dev);
 
 	clk_disable_unprepare(priv->plat->stmmac_clk);
 	clk_unregister_fixed_rate(priv->plat->stmmac_clk);
 
-	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
-		if (pci_resource_len(pdev, i) == 0)
-			continue;
-		pcim_iounmap_regions(pdev, BIT(i));
-		break;
-	}
+	pcim_iounmap_regions(pdev, BIT(0));
 
 	pci_disable_device(pdev);
 }
Signature · 1 line
2.26.2
#2 lore raw

PATCH v2 3/6 stmmac: intel: Convert to use pci_alloc_irq_vectors() API

In reply to Andy Shevchenko

pci_enable_msi() is deprecated API, thus, switch to modern pci_alloc_irq_vectors().

---
v2: rebase on updated patch 1 (no changes in the content, though)

 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c +8 -3
index e9f94855949959..bb8bf31c1259ef 100644
@@ -649,15 +649,18 @@ static int intel_eth_pci_probe(struct pci_dev *pdev,
 	if (ret)
 		return ret;
 
-	pci_enable_msi(pdev);
+	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+	if (ret < 0)
+		return ret;
 
 	memset(&res, 0, sizeof(res));
 	res.addr = pcim_iomap_table(pdev)[0];
-	res.wol_irq = pdev->irq;
-	res.irq = pdev->irq;
+	res.wol_irq = pci_irq_vector(pdev, 0);
+	res.irq = pci_irq_vector(pdev, 0);
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
 	if (ret) {
+		pci_free_irq_vectors(pdev);
 		clk_disable_unprepare(plat->stmmac_clk);
 		clk_unregister_fixed_rate(plat->stmmac_clk);
 	}
@@ -679,6 +682,8 @@ static void intel_eth_pci_remove(struct pci_dev *pdev)
 
 	stmmac_dvr_remove(&pdev->dev);
 
+	pci_free_irq_vectors(pdev);
+
 	clk_disable_unprepare(priv->plat->stmmac_clk);
 	clk_unregister_fixed_rate(priv->plat->stmmac_clk);
 
Signature · 1 line
2.26.2
#3 lore raw

PATCH v2 4/6 stmmac: intel: Eliminate useless conditions and variables

In reply to Andy Shevchenko

There are useless conditions like

	func()
	{
		...
		int ret;
		...
		ret = foo();
		if (ret)
			return ret;

		return 0;
	}

which may be replaced with direct return statement, what we have done here.

---
v2: no changes

 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c +2 -12
index bb8bf31c1259ef..b0d735e4c13ce2 100644
@@ -347,16 +347,11 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
 static int ehl_common_data(struct pci_dev *pdev,
 			   struct plat_stmmacenet_data *plat)
 {
-	int ret;
-
 	plat->rx_queues_to_use = 8;
 	plat->tx_queues_to_use = 8;
 	plat->clk_ptp_rate = 200000000;
-	ret = intel_mgbe_common_data(pdev, plat);
-	if (ret)
-		return ret;
 
-	return 0;
+	return intel_mgbe_common_data(pdev, plat);
 }
 
 static int ehl_sgmii_data(struct pci_dev *pdev,
@@ -457,16 +452,11 @@ static struct stmmac_pci_info ehl_pse1_sgmii1g_pci_info = {
 static int tgl_common_data(struct pci_dev *pdev,
 			   struct plat_stmmacenet_data *plat)
 {
-	int ret;
-
 	plat->rx_queues_to_use = 6;
 	plat->tx_queues_to_use = 4;
 	plat->clk_ptp_rate = 200000000;
-	ret = intel_mgbe_common_data(pdev, plat);
-	if (ret)
-		return ret;
 
-	return 0;
+	return intel_mgbe_common_data(pdev, plat);
 }
 
 static int tgl_sgmii_data(struct pci_dev *pdev,
Signature · 1 line
2.26.2
#4 lore raw

PATCH v2 5/6 stmmac: intel: Fix indentation to put on one line affected code

In reply to Andy Shevchenko

There is no competition to get more LOCs into the kernel, and driver can look better and have improved readability without those additional line breaks.

While at it, shorten info structures that they are all PCI, at the end it's a PCI driver for Intel hardware.

---
v2: no changes

 .../net/ethernet/stmicro/stmmac/dwmac-intel.c | 92 +++++++------------
 1 file changed, 32 insertions(+), 60 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c +32 -60
index b0d735e4c13ce2..2ac9dfb3462c69 100644
@@ -83,13 +83,9 @@ static int intel_serdes_powerup(struct net_device *ndev, void *priv_data)
 	serdes_phy_addr = intel_priv->mdio_adhoc_addr;
 
 	/* assert clk_req */
-	data = mdiobus_read(priv->mii, serdes_phy_addr,
-			    SERDES_GCR0);
-
+	data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0);
 	data |= SERDES_PLL_CLK;
-
-	mdiobus_write(priv->mii, serdes_phy_addr,
-		      SERDES_GCR0, data);
+	mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data);
 
 	/* check for clk_ack assertion */
 	data = serdes_status_poll(priv, serdes_phy_addr,
@@ -103,13 +99,9 @@ static int intel_serdes_powerup(struct net_device *ndev, void *priv_data)
 	}
 
 	/* assert lane reset */
-	data = mdiobus_read(priv->mii, serdes_phy_addr,
-			    SERDES_GCR0);
-
+	data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0);
 	data |= SERDES_RST;
-
-	mdiobus_write(priv->mii, serdes_phy_addr,
-		      SERDES_GCR0, data);
+	mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data);
 
 	/* check for assert lane reset reflection */
 	data = serdes_status_poll(priv, serdes_phy_addr,
@@ -123,14 +115,12 @@ static int intel_serdes_powerup(struct net_device *ndev, void *priv_data)
 	}
 
 	/*  move power state to P0 */
-	data = mdiobus_read(priv->mii, serdes_phy_addr,
-			    SERDES_GCR0);
+	data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0);
 
 	data &= ~SERDES_PWR_ST_MASK;
 	data |= SERDES_PWR_ST_P0 << SERDES_PWR_ST_SHIFT;
 
-	mdiobus_write(priv->mii, serdes_phy_addr,
-		      SERDES_GCR0, data);
+	mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data);
 
 	/* Check for P0 state */
 	data = serdes_status_poll(priv, serdes_phy_addr,
@@ -159,14 +149,12 @@ static void intel_serdes_powerdown(struct net_device *ndev, void *intel_data)
 	serdes_phy_addr = intel_priv->mdio_adhoc_addr;
 
 	/*  move power state to P3 */
-	data = mdiobus_read(priv->mii, serdes_phy_addr,
-			    SERDES_GCR0);
+	data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0);
 
 	data &= ~SERDES_PWR_ST_MASK;
 	data |= SERDES_PWR_ST_P3 << SERDES_PWR_ST_SHIFT;
 
-	mdiobus_write(priv->mii, serdes_phy_addr,
-		      SERDES_GCR0, data);
+	mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data);
 
 	/* Check for P3 state */
 	data = serdes_status_poll(priv, serdes_phy_addr,
@@ -180,13 +168,9 @@ static void intel_serdes_powerdown(struct net_device *ndev, void *intel_data)
 	}
 
 	/* de-assert clk_req */
-	data = mdiobus_read(priv->mii, serdes_phy_addr,
-			    SERDES_GCR0);
-
+	data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0);
 	data &= ~SERDES_PLL_CLK;
-
-	mdiobus_write(priv->mii, serdes_phy_addr,
-		      SERDES_GCR0, data);
+	mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data);
 
 	/* check for clk_ack de-assert */
 	data = serdes_status_poll(priv, serdes_phy_addr,
@@ -200,13 +184,9 @@ static void intel_serdes_powerdown(struct net_device *ndev, void *intel_data)
 	}
 
 	/* de-assert lane reset */
-	data = mdiobus_read(priv->mii, serdes_phy_addr,
-			    SERDES_GCR0);
-
+	data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0);
 	data &= ~SERDES_RST;
-
-	mdiobus_write(priv->mii, serdes_phy_addr,
-		      SERDES_GCR0, data);
+	mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data);
 
 	/* check for de-assert lane reset reflection */
 	data = serdes_status_poll(priv, serdes_phy_addr,
@@ -367,7 +347,7 @@ static int ehl_sgmii_data(struct pci_dev *pdev,
 	return ehl_common_data(pdev, plat);
 }
 
-static struct stmmac_pci_info ehl_sgmii1g_pci_info = {
+static struct stmmac_pci_info ehl_sgmii1g_info = {
 	.setup = ehl_sgmii_data,
 };
 
@@ -381,7 +361,7 @@ static int ehl_rgmii_data(struct pci_dev *pdev,
 	return ehl_common_data(pdev, plat);
 }
 
-static struct stmmac_pci_info ehl_rgmii1g_pci_info = {
+static struct stmmac_pci_info ehl_rgmii1g_info = {
 	.setup = ehl_rgmii_data,
 };
 
@@ -400,7 +380,7 @@ static int ehl_pse0_rgmii1g_data(struct pci_dev *pdev,
 	return ehl_pse0_common_data(pdev, plat);
 }
 
-static struct stmmac_pci_info ehl_pse0_rgmii1g_pci_info = {
+static struct stmmac_pci_info ehl_pse0_rgmii1g_info = {
 	.setup = ehl_pse0_rgmii1g_data,
 };
 
@@ -413,7 +393,7 @@ static int ehl_pse0_sgmii1g_data(struct pci_dev *pdev,
 	return ehl_pse0_common_data(pdev, plat);
 }
 
-static struct stmmac_pci_info ehl_pse0_sgmii1g_pci_info = {
+static struct stmmac_pci_info ehl_pse0_sgmii1g_info = {
 	.setup = ehl_pse0_sgmii1g_data,
 };
 
@@ -432,7 +412,7 @@ static int ehl_pse1_rgmii1g_data(struct pci_dev *pdev,
 	return ehl_pse1_common_data(pdev, plat);
 }
 
-static struct stmmac_pci_info ehl_pse1_rgmii1g_pci_info = {
+static struct stmmac_pci_info ehl_pse1_rgmii1g_info = {
 	.setup = ehl_pse1_rgmii1g_data,
 };
 
@@ -445,7 +425,7 @@ static int ehl_pse1_sgmii1g_data(struct pci_dev *pdev,
 	return ehl_pse1_common_data(pdev, plat);
 }
 
-static struct stmmac_pci_info ehl_pse1_sgmii1g_pci_info = {
+static struct stmmac_pci_info ehl_pse1_sgmii1g_info = {
 	.setup = ehl_pse1_sgmii1g_data,
 };
 
@@ -470,7 +450,7 @@ static int tgl_sgmii_data(struct pci_dev *pdev,
 	return tgl_common_data(pdev, plat);
 }
 
-static struct stmmac_pci_info tgl_sgmii1g_pci_info = {
+static struct stmmac_pci_info tgl_sgmii1g_info = {
 	.setup = tgl_sgmii_data,
 };
 
@@ -573,7 +553,7 @@ static int quark_default_data(struct pci_dev *pdev,
 	return 0;
 }
 
-static const struct stmmac_pci_info quark_pci_info = {
+static const struct stmmac_pci_info quark_info = {
 	.setup = quark_default_data,
 };
 
@@ -598,8 +578,7 @@ static int intel_eth_pci_probe(struct pci_dev *pdev,
 	struct stmmac_resources res;
 	int ret;
 
-	intel_priv = devm_kzalloc(&pdev->dev, sizeof(*intel_priv),
-				  GFP_KERNEL);
+	intel_priv = devm_kzalloc(&pdev->dev, sizeof(*intel_priv), GFP_KERNEL);
 	if (!intel_priv)
 		return -ENOMEM;
 
@@ -736,26 +715,19 @@ static SIMPLE_DEV_PM_OPS(intel_eth_pm_ops, intel_eth_pci_suspend,
 #define PCI_DEVICE_ID_INTEL_TGL_SGMII1G_ID		0xa0ac
 
 static const struct pci_device_id intel_eth_pci_id_table[] = {
-	{ PCI_DEVICE_DATA(INTEL, QUARK_ID, &quark_pci_info) },
-	{ PCI_DEVICE_DATA(INTEL, EHL_RGMII1G_ID, &ehl_rgmii1g_pci_info) },
-	{ PCI_DEVICE_DATA(INTEL, EHL_SGMII1G_ID, &ehl_sgmii1g_pci_info) },
-	{ PCI_DEVICE_DATA(INTEL, EHL_SGMII2G5_ID, &ehl_sgmii1g_pci_info) },
-	{ PCI_DEVICE_DATA(INTEL, EHL_PSE0_RGMII1G_ID,
-			  &ehl_pse0_rgmii1g_pci_info) },
-	{ PCI_DEVICE_DATA(INTEL, EHL_PSE0_SGMII1G_ID,
-			  &ehl_pse0_sgmii1g_pci_info) },
-	{ PCI_DEVICE_DATA(INTEL, EHL_PSE0_SGMII2G5_ID,
-			  &ehl_pse0_sgmii1g_pci_info) },
-	{ PCI_DEVICE_DATA(INTEL, EHL_PSE1_RGMII1G_ID,
-			  &ehl_pse1_rgmii1g_pci_info) },
-	{ PCI_DEVICE_DATA(INTEL, EHL_PSE1_SGMII1G_ID,
-			  &ehl_pse1_sgmii1g_pci_info) },
-	{ PCI_DEVICE_DATA(INTEL, EHL_PSE1_SGMII2G5_ID,
-			  &ehl_pse1_sgmii1g_pci_info) },
-	{ PCI_DEVICE_DATA(INTEL, TGL_SGMII1G_ID, &tgl_sgmii1g_pci_info) },
+	{ PCI_DEVICE_DATA(INTEL, QUARK_ID, &quark_info) },
+	{ PCI_DEVICE_DATA(INTEL, EHL_RGMII1G_ID, &ehl_rgmii1g_info) },
+	{ PCI_DEVICE_DATA(INTEL, EHL_SGMII1G_ID, &ehl_sgmii1g_info) },
+	{ PCI_DEVICE_DATA(INTEL, EHL_SGMII2G5_ID, &ehl_sgmii1g_info) },
+	{ PCI_DEVICE_DATA(INTEL, EHL_PSE0_RGMII1G_ID, &ehl_pse0_rgmii1g_info) },
+	{ PCI_DEVICE_DATA(INTEL, EHL_PSE0_SGMII1G_ID, &ehl_pse0_sgmii1g_info) },
+	{ PCI_DEVICE_DATA(INTEL, EHL_PSE0_SGMII2G5_ID, &ehl_pse0_sgmii1g_info) },
+	{ PCI_DEVICE_DATA(INTEL, EHL_PSE1_RGMII1G_ID, &ehl_pse1_rgmii1g_info) },
+	{ PCI_DEVICE_DATA(INTEL, EHL_PSE1_SGMII1G_ID, &ehl_pse1_sgmii1g_info) },
+	{ PCI_DEVICE_DATA(INTEL, EHL_PSE1_SGMII2G5_ID, &ehl_pse1_sgmii1g_info) },
+	{ PCI_DEVICE_DATA(INTEL, TGL_SGMII1G_ID, &tgl_sgmii1g_info) },
 	{}
 };
-
 MODULE_DEVICE_TABLE(pci, intel_eth_pci_id_table);
 
 static struct pci_driver intel_eth_pci_driver = {
Signature · 1 line
2.26.2
#5 lore raw

PATCH v2 6/6 stmmac: intel: Place object in the Makefile according to the order

In reply to Andy Shevchenko

Follow the order for the platform drivers, i.e. generic object are going first.

---
v2: new patch

 drivers/net/ethernet/stmicro/stmmac/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/Makefile +2 -2
index 5a6f265bc540fb..f9d024d6b69b58 100644
@@ -30,6 +30,6 @@ obj-$(CONFIG_DWMAC_GENERIC)	+= dwmac-generic.o
 stmmac-platform-objs:= stmmac_platform.o
 dwmac-altr-socfpga-objs := altr_tse_pcs.o dwmac-socfpga.o
 
-obj-$(CONFIG_DWMAC_INTEL) += dwmac-intel.o
-obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o
+obj-$(CONFIG_STMMAC_PCI)	+= stmmac-pci.o
+obj-$(CONFIG_DWMAC_INTEL)	+= dwmac-intel.o
 stmmac-pci-objs:= stmmac_pci.o
Signature · 1 line
2.26.2