drm/amd/display: Add dm support for DP 1.4 Compliance edid corruption test
Subsystems (3)
PATCH 1/1 drm/amd/display: Add dm support for DP 1.4 Compliance edid corruption test
It works together with drm framework
"drm: Add support for DP 1.4 Compliance edid corruption test"
--- .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 40 ++++++------------- 1 file changed, 13 insertions(+), 27 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +13 -27
@@ -554,6 +554,7 @@ enum dc_edid_status dm_helpers_read_local_edid( struct dc_sink *sink) {struct amdgpu_dm_connector *aconnector = link->priv; +struct drm_connector *connector = &aconnector->base;struct i2c_adapter *ddc;int retry =3 ;enum dc_edid_status edid_status;
@@ -571,6 +572,15 @@ enum dc_edid_status dm_helpers_read_local_edid( edid =drm_get_edid (&aconnector->base, ddc); +/* DP Compliance Test 4.2.2.6 */ +if (link->aux_mode && connector->edid_corrupt) +drm_dp_send_real_edid_checksum (&aconnector->dm_dp_aux.aux, connector->real_edid_checksum); + +if (!edid && connector->edid_corrupt) { + connector->edid_corrupt = false; +return EDID_BAD_CHECKSUM ; + } +if (!edid)return EDID_NO_RESPONSE ;
@@ -605,34 +615,10 @@ enum dc_edid_status dm_helpers_read_local_edid(DRM_ERROR ("EDID err: %d, on connector: %s" , edid_status, aconnector->base.name); -if (link->aux_mode) { -union test_request test_request = { {0 } }; -union test_response test_response = { {0 } }; - -dm_helpers_dp_read_dpcd (ctx, - link, -DP_TEST_REQUEST , - &test_request.raw, -sizeof (union test_request )); - -if (!test_request.bits.EDID_READ) -return edid_status; - test_response.bits.EDID_CHECKSUM_WRITE =1 ; - -dm_helpers_dp_write_dpcd (ctx, - link, -DP_TEST_EDID_CHECKSUM , - &sink->dc_edid.raw_edid[sink->dc_edid.length-1 ], -1 ); - -dm_helpers_dp_write_dpcd (ctx, - link, -DP_TEST_RESPONSE , - &test_response.raw, -sizeof (test_response)); - - } +/* DP Compliance Test 4.2.2.3 */ +if (link->aux_mode) +drm_dp_send_real_edid_checksum (&aconnector->dm_dp_aux.aux, sink->dc_edid.raw_edid[sink->dc_edid.length-1 ]);return edid_status; }
Signature · 6 lines
2.17.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
Quoted 21 lines · Jerry (Fangzhi) Zuo
It works together with drm framework
"drm: Add support for DP 1.4 Compliance edid corruption test"Signed-off-by Jerry (Fangzhi) Zuo <[email protected]>--- .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 40 ++++++------------- 1 file changed, 13 insertions(+), 27 deletions(-)drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +1
-0@@ -554,6 +554,7 @@ enum dc_edid_status dm_helpers_read_local_edid( struct dc_sink *sink) {struct amdgpu_dm_connector *aconnector = link->priv; +struct drm_connector *connector = &aconnector->base;struct i2c_adapter *ddc;int retry =3 ;enum dc_edid_status edid_status;
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c enum dc_edid_status dm_helpers_read_local_edid( · line 581
Quoted 10 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +7
-0@@ -571,6 +572,15 @@ enum dc_edid_status dm_helpers_read_local_edid( edid =drm_get_edid (&aconnector->base, ddc); +/* DP Compliance Test 4.2.2.6 */ +if (link->aux_mode && connector->edid_corrupt) +drm_dp_send_real_edid_checksum (&aconnector->dm_dp_aux.aux, connector->real_edid_checksum); + +if (!edid && connector->edid_corrupt) { + connector->edid_corrupt = false; +return EDID_BAD_CHECKSUM ;
You return EDID_BAD_CHECKSUM here but the surrounding loop uses "edid_status == EDID_BAD_CHECKSUM" as condition to go again. Is this duplicating functionality that dm_helpers_parse_edid_caps did?
Harry
Quoted 34 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +2
-23+ } +if (!edid)return EDID_NO_RESPONSE ;@@ -605,34 +615,10 @@ enum dc_edid_status dm_helpers_read_local_edid(DRM_ERROR ("EDID err: %d, on connector: %s" , edid_status, aconnector->base.name); -if (link->aux_mode) { -union test_request test_request = { {0 } }; -union test_response test_response = { {0 } }; - -dm_helpers_dp_read_dpcd (ctx, - link, -DP_TEST_REQUEST , - &test_request.raw, -sizeof (union test_request )); - -if (!test_request.bits.EDID_READ) -return edid_status; - test_response.bits.EDID_CHECKSUM_WRITE =1 ; - -dm_helpers_dp_write_dpcd (ctx, - link, -DP_TEST_EDID_CHECKSUM , - &sink->dc_edid.raw_edid[sink->dc_edid.length-1 ], -1 ); - - dm_helpers_dp_write_dpcd(ctx, - link, - DP_TEST_RESPONSE,
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c enum dc_edid_status dm_helpers_read_local_edid( · line 624
Quoted 10 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +3
-4- &test_response.raw, - sizeof(test_response)); - - } +/* DP Compliance Test 4.2.2.3 */ +if (link->aux_mode) +drm_dp_send_real_edid_checksum (&aconnector->dm_dp_aux.aux, sink->dc_edid.raw_edid[sink->dc_edid.length-1 ]);return edid_status; }
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
[AMD Official Use Only - Internal Distribution Only]
The error handling for edid read right now is categorized as:
1. If base block is fetched with checksum mismatch, drm will set connector->edid_corrupt and return with Null edid buffer. This case will be handled as compliance test case 4.2.2.6, retuning EDID_BAD_CHECKSUM right away without the need to got ahead to parse edid caps.
2. If edid buffer cannot be created, return EDID_NO_RESPONSE but do not set connector->edid_corrupt
3. For extension blocks, drm returns any valid blocks. For invalid extension blocks, drm doesn't set connector->edid_corrupt. This case will be further handled by dm_helpers_parse_edid_caps() with 3 times retries. If all failed, will return EDID_BAD_CHECKSUM dc as well to enable fail-safe mode.
Regards,
Jerry
-----Original Message-----
From: Wentland, Harry <[email protected]>
Sent: May 1, 2020 10:14 AM
To: Zuo, Jerry <[email protected]>; [email protected]; Wu, Hersen <[email protected]>; S, Shirish <[email protected]>
Cc: Deucher, Alexander <[email protected]>; Siqueira, Rodrigo <[email protected]>
Subject: Re: [PATCH] drm/amd/display: Add dm support for DP 1.4 Compliance edid corruption test
Quoted 24 lines · Jerry (Fangzhi) Zuo
It works together with drm framework
"drm: Add support for DP 1.4 Compliance edid corruption test"Signed-off-by Jerry (Fangzhi) Zuo <[email protected]>--- .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 40 ++++++------------- 1 file changed, 13 insertions(+), 27 deletions(-)drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +1
-0@@ -554,6 +554,7 @@ enum dc_edid_status dm_helpers_read_local_edid( struct dc_sink *sink) {struct amdgpu_dm_connector *aconnector = link->priv; +struct drm_connector *connector = &aconnector->base;struct i2c_adapter *ddc;int retry =3 ;enum dc_edid_status edid_status;@@ -571,6 +572,15 @@ enum dc_edid_status dm_helpers_read_local_edid(
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c enum dc_edid_status dm_helpers_read_local_edid( · line 582
Quoted 10 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +8
-0edid =drm_get_edid (&aconnector->base, ddc); +/* DP Compliance Test 4.2.2.6 */ +if (link->aux_mode && connector->edid_corrupt) +drm_dp_send_real_edid_checksum (&aconnector->dm_dp_aux.aux, +connector->real_edid_checksum); + +if (!edid && connector->edid_corrupt) { +connector->edid_corrupt = false; +return EDID_BAD_CHECKSUM ;
You return EDID_BAD_CHECKSUM here but the surrounding loop uses "edid_status == EDID_BAD_CHECKSUM" as condition to go again. Is this duplicating functionality that dm_helpers_parse_edid_caps did?
Harry
Quoted 35 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +2
-24+} +if (!edid)return EDID_NO_RESPONSE ;@@ -605,34 +615,10 @@ enum dc_edid_status dm_helpers_read_local_edid(DRM_ERROR ("EDID err: %d, on connector: %s" , edid_status, aconnector->base.name); -if (link->aux_mode) { -union test_request test_request = { {0 } }; -union test_response test_response = { {0 } }; - -dm_helpers_dp_read_dpcd (ctx, -link, -DP_TEST_REQUEST , -&test_request.raw, -sizeof (union test_request )); - -if (!test_request.bits.EDID_READ) -return edid_status; -test_response.bits.EDID_CHECKSUM_WRITE =1 ; - -dm_helpers_dp_write_dpcd (ctx, -link, -DP_TEST_EDID_CHECKSUM , -&sink->dc_edid.raw_edid[sink->dc_edid.length-1 ], -1 ); - -dm_helpers_dp_write_dpcd(ctx, -link, -DP_TEST_RESPONSE, -&test_response.raw,
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c enum dc_edid_status dm_helpers_read_local_edid( · line 624
Quoted 10 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +4
-3-sizeof(test_response)); - -} +/* DP Compliance Test 4.2.2.3 */ +if (link->aux_mode) +drm_dp_send_real_edid_checksum (&aconnector->dm_dp_aux.aux, +sink->dc_edid.raw_edid[sink->dc_edid.length-1 ]);return edid_status; }
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
[AMD Official Use Only - Internal Distribution Only]
-----Original Message-----
From: Zuo, Jerry
Sent: May 1, 2020 8:23 PM
To: Wentland, Harry <[email protected]>; [email protected]; Wu, Hersen <[email protected]>; S, Shirish <[email protected]>
Cc: Deucher, Alexander <[email protected]>; Siqueira, Rodrigo <[email protected]>
Subject: RE: [PATCH] drm/amd/display: Add dm support for DP 1.4 Compliance edid corruption test
The error handling for edid read right now is categorized as:
1. If base block is fetched with checksum mismatch, drm will set connector->edid_corrupt and return with Null edid buffer. This case will be handled as compliance test case 4.2.2.6, retuning EDID_BAD_CHECKSUM to dc right away without the need to got ahead to parse edid caps.
2. If edid buffer cannot be created, return EDID_NO_RESPONSE but do not set connector->edid_corrupt
3. For extension blocks, drm returns any valid blocks. For invalid extension blocks, drm doesn't set connector->edid_corrupt. This case will be further handled by dm_helpers_parse_edid_caps() with 3 times retries. If all failed, will return EDID_BAD_CHECKSUM as well to enable fail-safe mode.
Regards,
Jerry
-----Original Message-----
From: Wentland, Harry <[email protected]>
Sent: May 1, 2020 10:14 AM
To: Zuo, Jerry <[email protected]>; [email protected]; Wu, Hersen <[email protected]>; S, Shirish <[email protected]>
Cc: Deucher, Alexander <[email protected]>; Siqueira, Rodrigo <[email protected]>
Subject: Re: [PATCH] drm/amd/display: Add dm support for DP 1.4 Compliance edid corruption test
Quoted 24 lines · Jerry (Fangzhi) Zuo
It works together with drm framework
"drm: Add support for DP 1.4 Compliance edid corruption test"Signed-off-by Jerry (Fangzhi) Zuo <[email protected]>--- .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 40 ++++++------------- 1 file changed, 13 insertions(+), 27 deletions(-)drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +1
-0@@ -554,6 +554,7 @@ enum dc_edid_status dm_helpers_read_local_edid( struct dc_sink *sink) {struct amdgpu_dm_connector *aconnector = link->priv; +struct drm_connector *connector = &aconnector->base;struct i2c_adapter *ddc;int retry =3 ;enum dc_edid_status edid_status;@@ -571,6 +572,15 @@ enum dc_edid_status dm_helpers_read_local_edid(
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c enum dc_edid_status dm_helpers_read_local_edid( · line 582
Quoted 10 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +8
-0edid =drm_get_edid (&aconnector->base, ddc); +/* DP Compliance Test 4.2.2.6 */ +if (link->aux_mode && connector->edid_corrupt) +drm_dp_send_real_edid_checksum (&aconnector->dm_dp_aux.aux, +connector->real_edid_checksum); + +if (!edid && connector->edid_corrupt) { +connector->edid_corrupt = false; +return EDID_BAD_CHECKSUM ;
You return EDID_BAD_CHECKSUM here but the surrounding loop uses "edid_status == EDID_BAD_CHECKSUM" as condition to go again. Is this duplicating functionality that dm_helpers_parse_edid_caps did?
Harry
Quoted 35 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +2
-24+} +if (!edid)return EDID_NO_RESPONSE ;@@ -605,34 +615,10 @@ enum dc_edid_status dm_helpers_read_local_edid(DRM_ERROR ("EDID err: %d, on connector: %s" , edid_status, aconnector->base.name); -if (link->aux_mode) { -union test_request test_request = { {0 } }; -union test_response test_response = { {0 } }; - -dm_helpers_dp_read_dpcd (ctx, -link, -DP_TEST_REQUEST , -&test_request.raw, -sizeof (union test_request )); - -if (!test_request.bits.EDID_READ) -return edid_status; -test_response.bits.EDID_CHECKSUM_WRITE =1 ; - -dm_helpers_dp_write_dpcd (ctx, -link, -DP_TEST_EDID_CHECKSUM , -&sink->dc_edid.raw_edid[sink->dc_edid.length-1 ], -1 ); - -dm_helpers_dp_write_dpcd(ctx, -link, -DP_TEST_RESPONSE, -&test_response.raw,
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c enum dc_edid_status dm_helpers_read_local_edid( · line 624
Quoted 10 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +4
-3-sizeof(test_response)); - -} +/* DP Compliance Test 4.2.2.3 */ +if (link->aux_mode) +drm_dp_send_real_edid_checksum (&aconnector->dm_dp_aux.aux, +sink->dc_edid.raw_edid[sink->dc_edid.length-1 ]);return edid_status; }
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
[AMD Official Use Only - Internal Distribution Only]
Quoted 21 lines · Jerry (Fangzhi) Zuo
It works together with drm framework
"drm: Add support for DP 1.4 Compliance edid corruption test"Signed-off-by Jerry (Fangzhi) Zuo <[email protected]>--- .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 40 ++++++------------- 1 file changed, 13 insertions(+), 27 deletions(-)drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +1
-0@@ -554,6 +554,7 @@ enum dc_edid_status dm_helpers_read_local_edid( struct dc_sink *sink) {struct amdgpu_dm_connector *aconnector = link->priv; +struct drm_connector *connector = &aconnector->base;struct i2c_adapter *ddc;int retry =3 ;enum dc_edid_status edid_status;
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c enum dc_edid_status dm_helpers_read_local_edid( · line 581
Quoted 10 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +7
-0@@ -571,6 +572,15 @@ enum dc_edid_status dm_helpers_read_local_edid( edid =drm_get_edid (&aconnector->base, ddc); +/* DP Compliance Test 4.2.2.6 */ +if (link->aux_mode && connector->edid_corrupt) +drm_dp_send_real_edid_checksum (&aconnector->dm_dp_aux.aux, connector->real_edid_checksum); + +if (!edid && connector->edid_corrupt) { + connector->edid_corrupt = false; +return EDID_BAD_CHECKSUM ;
You return EDID_BAD_CHECKSUM here but the surrounding loop uses "edid_status == EDID_BAD_CHECKSUM" as condition to go again. Is this duplicating functionality that dm_helpers_parse_edid_caps did?
Harry
It is not duplicate. You mentioned dm_helpers_parse_edid_caps() with retries is fallen into the 3rd checkup step below:
1. If base block is fetched with checksum mismatch, drm will set connector->edid_corrupt and return with Null edid buffer. This case will be handled as compliance test case 4.2.2.6, retuning EDID_BAD_CHECKSUM right away without going ahead to parse edid caps --> newly added
2. If edid buffer cannot be created, return EDID_NO_RESPONSE but do not set connector->edid_corrupt
3. For invalid extension blocks, drm doesn't set connector->edid_corrupt. This case will be further handled by dm_helpers_parse_edid_caps() with 3 times retries.
If failed any step above with EDID_BAD_CHECKSUM, will enable fail-safe mode in DC.
Jerry
Quoted 34 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +2
-23+ } +if (!edid)return EDID_NO_RESPONSE ;@@ -605,34 +615,10 @@ enum dc_edid_status dm_helpers_read_local_edid(DRM_ERROR ("EDID err: %d, on connector: %s" , edid_status, aconnector->base.name); -if (link->aux_mode) { -union test_request test_request = { {0 } }; -union test_response test_response = { {0 } }; - -dm_helpers_dp_read_dpcd (ctx, - link, -DP_TEST_REQUEST , - &test_request.raw, -sizeof (union test_request )); - -if (!test_request.bits.EDID_READ) -return edid_status; - test_response.bits.EDID_CHECKSUM_WRITE =1 ; - -dm_helpers_dp_write_dpcd (ctx, - link, -DP_TEST_EDID_CHECKSUM , - &sink->dc_edid.raw_edid[sink->dc_edid.length-1 ], -1 ); - - dm_helpers_dp_write_dpcd(ctx, - link, - DP_TEST_RESPONSE,
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c enum dc_edid_status dm_helpers_read_local_edid( · line 624
Quoted 10 lines
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +3
-4- &test_response.raw, - sizeof(test_response)); - - } +/* DP Compliance Test 4.2.2.3 */ +if (link->aux_mode) +drm_dp_send_real_edid_checksum (&aconnector->dm_dp_aux.aux, sink->dc_edid.raw_edid[sink->dc_edid.length-1 ]);return edid_status; }
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
Harry Wentland
Reviewed-byQuoted 43 lines · Jerry
[AMD Official Use Only - Internal Distribution Only]
Quoted 23 lines · Jerry (Fangzhi) Zuo
It works together with drm framework
"drm: Add support for DP 1.4 Compliance edid corruption test"Signed-off-by Jerry (Fangzhi) Zuo <[email protected]>---
.../amd/display/amdgpu_dm/amdgpu_dm_helpers.c| 40 ++++++-------------1 file changed, 13 insertions(+), 27 deletions(-)drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +1
-0@@ -554,6 +554,7 @@ enum dc_edid_status dm_helpers_read_local_edid( struct dc_sink *sink) { struct amdgpu_dm_connector *aconnector = link->priv; + struct drm_connector *connector = &aconnector->base; struct i2c_adapter *ddc; int retry = 3; enum dc_edid_status edid_status;@@ -571,6 +572,15 @@ enum dc_edid_status dm_helpers_read_local_edid(
edid =drm_get_edid(&aconnector->base, ddc);Quoted 8 lines
+ /* DP Compliance Test 4.2.2.6 */
+ if (link->aux_mode&&connector->edid_corrupt)
+drm_dp_send_real_edid_checksum(&aconnector->dm_dp_aux.aux, connector->real_edid_checksum); +
+ if (!edid &&connector->edid_corrupt) {
+connector->edid_corrupt= false;
+ returnEDID_BAD_CHECKSUM;You return
EDID_BAD_CHECKSUMhere but the surrounding loop uses "edid_status==EDID_BAD_CHECKSUM" as condition to go again. Is this duplicating functionality thatdm_helpers_parse_edid_capsdid?Harry
Quoted 14 lines
It is not duplicate. You mentioned
dm_helpers_parse_edid_caps()with retries is fallen into the 3rd checkup step below:
1. If base block is fetched with checksum mismatch, drm will setconnector->edid_corruptand return with Null edid buffer. This case will be handled as compliance test case 4.2.2.6, retuningEDID_BAD_CHECKSUMright away without going ahead to parse edid caps --> newly added
2. If edid buffer cannot be created, returnEDID_NO_RESPONSEbut do not setconnector->edid_corrupt
3. For invalid extension blocks, drm doesn't setconnector->edid_corrupt. This case will be further handled bydm_helpers_parse_edid_caps()with 3 times retries.
If failed any step above withEDID_BAD_CHECKSUM, will enable fail-safe mode in DC.
Thanks. Just curious if there's a way to simplify the code.
Either way, this patch is
Harry
Quoted 39 lines
Jerry
Quoted 36 lines
+ }
+
if (!edid)
returnEDID_NO_RESPONSE;drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +0
-12@@ -605,34 +615,10 @@ enum dc_edid_status dm_helpers_read_local_edid( DRM_ERROR("EDID err: %d, on connector: %s", edid_status, aconnector->base.name); - if (link->aux_mode) { - union test_request test_request = { {0} }; - union test_response test_response = { {0} }; - - dm_helpers_dp_read_dpcd(ctx, - link, - DP_TEST_REQUEST, - &test_request.raw, - sizeof(union test_request)); - - if (!test_request.bits.EDID_READ) - return edid_status;
- test_response.bits.EDID_CHECKSUM_WRITE = 1;drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +0
-13- - dm_helpers_dp_write_dpcd(ctx, - link, - DP_TEST_EDID_CHECKSUM, - &sink->dc_edid.raw_edid[sink->dc_edid.length-1], - 1); - - dm_helpers_dp_write_dpcd(ctx, - link, - DP_TEST_RESPONSE, - &test_response.raw, - sizeof(test_response)); -
Quoted 8 lines
Quoted 8 lines
- }
+ /* DP Compliance Test 4.2.2.3 */
+ if (link->aux_mode)
+drm_dp_send_real_edid_checksum(&aconnector->dm_dp_aux.aux, sink->dc_edid.raw_edid[sink->dc_edid.length-1]);
returnedid_status;
}
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx