introduction of migration_version attribute for VFIO live migration
Subsystems (6)
v5 cover introduction of migration_version attribute for VFIO live migration
This patchset introduces a migration_version attribute under sysfs of VFIO Mediated devices.
This migration_version attribute is used to check migration compatibility between two mdev devices.
Currently, it has two locations:
(1) under mdev_type node,
which can be used even before device creation, but only for mdev devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, but the src and target mdev devices are not necessarily be of the same mdev type
(The second location is newly added in v5, in order to keep consistent with the migration_version node for migratable pass-though devices)
Patch 1 defines migration_version attribute for the first location in Documentation/vfio-mediated-device.txt
Patch 2 uses GVT as an example for patch 1 to show how to expose migration_version attribute and check migration compatibility in vendor driver.
Patch 3 defines migration_version attribute for the second location in Documentation/vfio-mediated-device.txt
Patch 4 uses GVT as an example for patch 3 to show how to expose migration_version attribute and check migration compatibility in vendor driver.
(The previous "Reviewed-by" and "Acked-by" for patch 1 and patch 2 are kept in v5, as there are only small changes to commit messages of the two patches.)
v5:
added patch 2 and 4 for mdev device part of migration_version attribute.
v4:
1. fixed indentation/spell errors, reworded several error messages
2. added a missing memory free for error handling in patch 2
v3:
1. renamed version to migration_version
2. let errno to be freely defined by vendor driver
3. let checking mdev_type be prerequisite of migration compatibility check
4. reworded most part of patch 1
5. print detailed error log in patch 2 and generate migration_version string at init time
v2:
1. renamed patched 1
2. made definition of device version string completely private to vendor driver
3. reverted changes to sample mdev drivers
4. described intent and usage of version attribute more clearly.
Yan Zhao (4):
vfio/mdev: add migration_version attribute for mdev (under mdev_type
node)
drm/i915/gvt: export migration_version to mdev sysfs (under mdev_type
node)
vfio/mdev: add migration_version attribute for mdev (under mdev device
node)
drm/i915/gvt: export migration_version to mdev sysfs (under mdev
device node)
.../driver-api/vfio-mediated-device.rst | 183 ++++++++++++++++++ drivers/gpu/drm/i915/gvt/Makefile | 2 +- drivers/gpu/drm/i915/gvt/gvt.c | 39 ++++ drivers/gpu/drm/i915/gvt/gvt.h | 7 + drivers/gpu/drm/i915/gvt/kvmgt.c | 55 ++++++ drivers/gpu/drm/i915/gvt/migration_version.c | 170 ++++++++++++++++ drivers/gpu/drm/i915/gvt/vgpu.c | 13 +- 7 files changed, 466 insertions(+), 3 deletions(-) create mode 100644 drivers/gpu/drm/i915/gvt/migration_version.c
Signature · 1 line
2.17.1
PATCH v5 1/4 vfio/mdev: add migration_version attribute for mdev (under mdev_type node)
migration_version attribute is used to check migration compatibility between two mdev devices of the same mdev type.
The key is that it's rw and its data is opaque to userspace.
Userspace reads migration_version of mdev device at source side and writes the value to migration_version attribute of mdev device at target side. It judges migration compatibility according to whether the read and write operations succeed or fail.
Currently, it is able to read/write migration_version attribute under two places:
(1) under mdev_type node
userspace is able to know whether two mdev devices are compatible before a mdev device is created.
userspace also needs to check whether the two mdev devices are of the same mdev type before checking the migration_version attribute. It also needs to check device creation parameters if aggregation is supported in future.
(2) under mdev device node
userspace is able to know whether two mdev devices are compatible after they are all created. But it does not need to check mdev type and device creation parameter for aggregation as device vendor driver would have incorporated those information into the migration_version attribute.
__ userspace
/\ \
/ \write
/ read \
________/__________ ___\|/_____________
| migration_version | | migration_version |-->check migration
--------------------- --------------------- compatibility
mdev device A mdev device BThis patch is for mdev documentation about the first place (under mdev_type node)
---
v5:
updated commit message a little to indicate this patch is for migration_version attribute under mdev_type node
v4:
fixed a typo. (Cornelia Huck)
v3:
1. renamed version to migration_version
(Christophe de Dinechin, Cornelia Huck, Alex Williamson)
2. let errno to be freely defined by vendor driver
(Alex Williamson, Erik Skultety, Cornelia Huck, Dr. David Alan Gilbert)
3. let checking mdev_type be prerequisite of migration compatibility check. (Alex Williamson)
4. reworded example usage section.
(most of this section came from Alex Williamson)
5. reworded attribute intention section (Cornelia Huck)
v2:
1. added detailed intent and usage
2. made definition of version string completely private to vendor driver (Alex Williamson)
3. abandoned changes to sample mdev drivers (Alex Williamson)
4. mandatory --> optional (Cornelia Huck)
5. added description for errno (Cornelia Huck)
--- .../driver-api/vfio-mediated-device.rst | 113 ++++++++++++++++++ 1 file changed, 113 insertions(+)
Documentation/driver-api/vfio-mediated-device.rst +113 -0
@@ -202,6 +202,7 @@ Directories and files under the sysfs for Each Physical Device | | |--- available_instances | | |--- device_api | | |--- description + | | |--- migration_version | | |--- [devices] | |--- [<type-id>] | | |--- create
@@ -209,6 +210,7 @@ Directories and files under the sysfs for Each Physical Device | | |--- available_instances | | |--- device_api | | |--- description + | | |--- migration_version | | |--- [devices] | |--- [<type-id>] | |--- create
@@ -216,6 +218,7 @@ Directories and files under the sysfs for Each Physical Device | |--- available_instances | |--- device_api | |--- description + | |--- migration_version | |--- [devices] * [mdev_supported_types]
@@ -246,6 +249,116 @@ Directories and files under the sysfs for Each Physical Device This attribute should show the number of devices of type <type-id> that can be created. +* migration_version + + This attribute is rw, and is optional. + It is used to check migration compatibility between two mdev devices of the + same mdev type. Absence of this attribute means the device of type <type-id> + does not support migration. + This attribute provides a way to check migration compatibility between two + mdev devices from userspace even before device creation. The intended usage is + for userspace to read the migration_version attribute from one mdev device and + then writing that value to the migration_version attribute of the other mdev + device. The second mdev device indicates compatibility via the return code of + the write operation. This makes compatibility between mdev devices completely + vendor-defined and opaque to userspace. Userspace should do nothing more + than verify the mdev types match and then use the migration_version attribute + to confirm source to target compatibility. + + Reading/Writing Attribute Data: + read(2) will fail if device of type <type-id> does not support migration and + otherwise succeed and return migration_version string of the device of + type <type-id>. + + This migration_version string is vendor defined and opaque to the + userspace. Vendor is free to include whatever they feel is relevant. + e.g. <pciid of parent device>-<software version>. + + Restrictions on this migration_version string: + 1. It should only contain ascii characters + 2. MAX Length is PATH_MAX (4096) + + write(2) expects migration_version string of source mdev device, and will + succeed if it is determined to be compatible and otherwise fail with + vendor specific errno. + + Errno: + -An errno on read(2) indicates the device of type <type-id> does not support + migration; + -An errno on write(2) indicates the devices are incompatible or the target + doesn't support migration. + Vendor driver is free to define specific errno and is suggested to + print detailed error in syslog for diagnose purpose. + + Userspace should treat ANY of below conditions as two mdev devices not + compatible: + (0) The mdev devices are not of the same type + (1) any one of the two mdev devices does not have a migration_version + attribute + (2) error when reading from migration_version attribute of one mdev device + (3) error when writing migration_version string of one mdev device to + migration_version attribute of the other mdev device + + Userspace should regard two mdev devices compatible when ALL of below + conditions are met: + (0) The mdev devices are of the same type + (1) success when reading from migration_version attribute of one mdev device. + (2) success when writing migration_version string of one mdev device to + migration_version attribute of the other mdev device. + + Example Usage: + (1) Compare mdev types: + + The mdev type of an instantiated device can be read from the mdev_type link + within the device instance in sysfs, for example: + + # basename $(readlink -f /sys/bus/mdev/devices/$MDEV_UUID/mdev_type/) + + The mdev types available on a given host system can also be found through + /sys/class/mdev_bus, for example: + + # ls /sys/class/mdev_bus/*/mdev_supported_types/ + + Migration is only possible between devices of the same mdev type. + + (2) Retrieve the mdev source migration_version: + + The migration_version information can either be read from the mdev_type link + on an instantiated device: + + # cat /sys/bus/mdev/devices/$UUID1/mdev_type/migration_version + + Or it can be read from the mdev type definition, for example: + + # cat /sys/class/mdev_bus/*/mdev_supported_types/$MDEV_TYPE/migration_version + + If reading the source migration_version generates an error, migration is not + possible. + NB, there might be several parent devices for a given mdev type on a host + system, each may support or expose different migration_versions. + Matching the specific mdev type to a parent may become important in such + configurations. + + (3) Test source migration_version at target: + + Given a migration_version as outlined above, its compatibility to an + instantiated device of the same mdev type can be tested as: + # echo $VERSION > /sys/bus/mdev/devices/$UUID2/mdev_type/migration_version + + If this write fails, the source and target migration versions are not + compatible or the target does not support migration. + + Compatibility can also be tested prior to target device creation using the + mdev type definition for a parent device with a previously found matching mdev + type, for example: + + # echo $VERSION > \ + /sys/class/mdev_bus/$PARENT/mdev_supported_types/$MDEV_TYPE/migration_version + + Again, an error writing the migration_version indicates that an instance of + this mdev type would not support a migration from the provided migration + version. + * [device] This directory contains links to the devices of type <type-id> that have been
Signature · 1 line
2.17.1
Re: [PATCH v5 1/4] vfio/mdev: add migration_version attribute for mdev (under mdev_type node)
Quoted 112 lines · Yan Zhao
migration_versionattribute is used to check migration compatibility between two mdev devices of the same mdev type.
The key is that it's rw and its data is opaque to userspace.Userspace reads
migration_versionof mdev device at source side and writes the value tomigration_versionattribute of mdev device at target side. It judges migration compatibility according to whether the read and write operations succeed or fail.Currently, it is able to read/write
migration_versionattribute under two places:(1) under
mdev_typenode
userspace is able to know whether two mdev devices are compatible before a mdev device is created.userspace also needs to check whether the two mdev devices are of the same mdev type before checking the
migration_versionattribute. It also needs to check device creation parameters if aggregation is supported in future.(2) under mdev device node
userspace is able to know whether two mdev devices are compatible after they are all created. But it does not need to check mdev type and device creation parameter for aggregation as device vendor driver would have incorporated those information into themigration_versionattribute.__ userspace /\ \ / \write / read \ ________/__________ ___\|/_____________ | migration_version | | migration_version |-->check migration --------------------- --------------------- compatibility mdev device A mdev device BThis patch is for mdev documentation about the first place (under
mdev_typenode)Cc Alex Williamson <[email protected]>Cc Erik Skultety <[email protected]>Cc "Dr. David Alan Gilbert" <[email protected]>Cc Cornelia Huck <[email protected]>Cc "Tian, Kevin" <[email protected]>Cc Zhenyu Wang <[email protected]>Cc "Wang, Zhi A" <[email protected]>Cc Neo Jia <[email protected]>Cc Kirti Wankhede <[email protected]>Cc Daniel P. Berrangé <[email protected]>Cc Christophe de Dinechin <[email protected]>Reviewed-by Cornelia Huck <[email protected]>Signed-off-by Yan Zhao <[email protected]>---
v5:
updated commit message a little to indicate this patch is formigration_versionattribute undermdev_typenodev4:
fixed a typo. (Cornelia Huck)v3:
1. renamed version tomigration_version
(Christophe de Dinechin, Cornelia Huck, Alex Williamson)
2. let errno to be freely defined by vendor driver
(Alex Williamson, Erik Skultety, Cornelia Huck, Dr. David Alan Gilbert)
3. let checkingmdev_typebe prerequisite of migration compatibility check. (Alex Williamson)
4. reworded example usage section.
(most of this section came from Alex Williamson)
5. reworded attribute intention section (Cornelia Huck)v2:
1. added detailed intent and usage
2. made definition of version string completely private to vendor driver (Alex Williamson)
3. abandoned changes to sample mdev drivers (Alex Williamson)
4. mandatory --> optional (Cornelia Huck)
5. added description for errno (Cornelia Huck)--- .../driver-api/vfio-mediated-device.rst | 113 ++++++++++++++++++ 1 file changed, 113 insertions(+)Documentation/driver-api/vfio-mediated-device.rst +3
-0@@ -202,6 +202,7 @@ Directories and files under the sysfs for Each Physical Device | | |--- available_instances | | |--- device_api | | |--- description + | | |--- migration_version | | |--- [devices] | |--- [<type-id>] | | |--- create@@ -209,6 +210,7 @@ Directories and files under the sysfs for Each Physical Device | | |--- available_instances | | |--- device_api | | |--- description + | | |--- migration_version | | |--- [devices] | |--- [<type-id>] | |--- create@@ -216,6 +218,7 @@ Directories and files under the sysfs for Each Physical Device | |--- available_instances | |--- device_api | |--- description + | |--- migration_version | |--- [devices] * [mdev_supported_types]
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 250
Quoted 2 lines
Documentation/driver-api/vfio-mediated-device.rst +0
-0@@ -246,6 +249,116 @@ Directories and files under the sysfs for Each Physical Device This attribute should show the number of devices of type <type-id> that can be created.
I've got only a few suggestions to improve to wording in the documentation (feel free to disagree):
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 254
Quoted 4 lines
Documentation/driver-api/vfio-mediated-device.rst +3
-0+* migration_version + + This attribute is rw, and is optional.
IMO better wording: "This is an optional, RW attribute."
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 259
Quoted 5 lines
Documentation/driver-api/vfio-mediated-device.rst +5
-0+ It is used to check migration compatibility between two mdev devices of the + same mdev type. Absence of this attribute means the device of type <type-id> + does not support migration. + This attribute provides a way to check migration compatibility between two + mdev devices from userspace even before device creation. The intended usage is
^This sentence essentially duplicates the information from the first sentence, can we condense it into something like:
"It is used to check the migration compatibility between two mdev devices of the same mdev type. Typically, the target device has not been created yet at the time of userspace using this attribute to check the migration compatibility."
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 266
Quoted 7 lines
Documentation/driver-api/vfio-mediated-device.rst +7
-0+ for userspace to read the migration_version attribute from one mdev device and + then writing that value to the migration_version attribute of the other mdev + device. The second mdev device indicates compatibility via the return code of + the write operation. This makes compatibility between mdev devices completely + vendor-defined and opaque to userspace. Userspace should do nothing more + than verify the mdev types match and then use the migration_version attribute + to confirm source to target compatibility.
I'd rephrase the ^last sentence differently:
"Therefore, userspace is only expected to verify that the mdev types of the respective devices match and then use the migration_version attribute to confirm migration compatibility between the source and target mdev devices."
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 270
Quoted 4 lines
Documentation/driver-api/vfio-mediated-device.rst +4
-0+ + Reading/Writing Attribute Data: + read(2) will fail if device of type <type-id> does not support migration and + otherwise succeed and return migration_version string of the device of
"returns a migration_version string of the device on success, fails with an errno if the device doesn't support migration"
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 283
Quoted 13 lines
Documentation/driver-api/vfio-mediated-device.rst +13
-0+ type <type-id>. + + This migration_version string is vendor defined and opaque to the + userspace. Vendor is free to include whatever they feel is relevant. + e.g. <pciid of parent device>-<software version>. + + Restrictions on this migration_version string: + 1. It should only contain ascii characters + 2. MAX Length is PATH_MAX (4096) + + write(2) expects migration_version string of source mdev device, and will + succeed if it is determined to be compatible and otherwise fail with + vendor specific errno.
"expects a migration_version string of the source mdev device, succeeds if the two mdev devices are migration compatible, otherwise fails with and errno"
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 293
Quoted 10 lines
Documentation/driver-api/vfio-mediated-device.rst +10
-0+ + Errno: + -An errno on read(2) indicates the device of type <type-id> does not support + migration; + -An errno on write(2) indicates the devices are incompatible or the target + doesn't support migration. + Vendor driver is free to define specific errno and is suggested to + print detailed error in syslog for diagnose purpose. + + Userspace should treat ANY of below conditions as two mdev devices not
Userspace should treat any of the below conditions as an indication of migration incompatibility between two mdev devices.
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 297
Quoted 4 lines
Documentation/driver-api/vfio-mediated-device.rst +4
-0+ compatible: + (0) The mdev devices are not of the same type + (1) any one of the two mdev devices does not have a migration_version + attribute
any of the two mdev devices is missing the migration_version attribute
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 298
Quoted 1 line
Documentation/driver-api/vfio-mediated-device.rst +1
-0+ (2) error when reading from migration_version attribute of one mdev device
when reading the source mdev's migration_version attribute
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 300
Quoted 2 lines
Documentation/driver-api/vfio-mediated-device.rst +2
-0+ (3) error when writing migration_version string of one mdev device to + migration_version attribute of the other mdev device
when writing the source mdev migration_version string to the target mdev device's migration_version attribute
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 303
Quoted 3 lines
Documentation/driver-api/vfio-mediated-device.rst +3
-0+ + Userspace should regard two mdev devices compatible when ALL of below + conditions are met:
Userspace can consider the two mdev devices to be compatible when all of the below conditions are met:
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 305
Quoted 2 lines
Documentation/driver-api/vfio-mediated-device.rst +2
-0+ (0) The mdev devices are of the same type + (1) success when reading from migration_version attribute of one mdev device.
reading the migration_version attribute of the source succeeds
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 307
Quoted 2 lines
Documentation/driver-api/vfio-mediated-device.rst +2
-0+ (2) success when writing migration_version string of one mdev device to + migration_version attribute of the other mdev device.
writing the migration_version string to the target mdev's migration_version attribute succeeds
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 310
Quoted 3 lines
Documentation/driver-api/vfio-mediated-device.rst +3
-0+ + Example Usage: + (1) Compare mdev types:
Comparing two mdev types:
Quoted 7 lines
Documentation/driver-api/vfio-mediated-device.rst +7
-0+ + The mdev type of an instantiated device can be read from the mdev_type link + within the device instance in sysfs, for example: + + # basename $(readlink -f /sys/bus/mdev/devices/$MDEV_UUID/mdev_type/) + + The mdev types available on a given host system can also be found through
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 327
Quoted 10 lines
Documentation/driver-api/vfio-mediated-device.rst +10
-0+ /sys/class/mdev_bus, for example: + + # ls /sys/class/mdev_bus/*/mdev_supported_types/ + + Migration is only possible between devices of the same mdev type. + + (2) Retrieve the mdev source migration_version: + + The migration_version information can either be read from the mdev_type link + on an instantiated device:
s/information/string
Quoted 14 lines
Documentation/driver-api/vfio-mediated-device.rst +14
-0+ + # cat /sys/bus/mdev/devices/$UUID1/mdev_type/migration_version + + Or it can be read from the mdev type definition, for example: + + # cat /sys/class/mdev_bus/*/mdev_supported_types/$MDEV_TYPE/migration_version + + If reading the source migration_version generates an error, migration is not + possible. + NB, there might be several parent devices for a given mdev type on a host + system, each may support or expose different migration_versions. + Matching the specific mdev type to a parent may become important in such + configurations. +
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 351
Quoted 10 lines
Documentation/driver-api/vfio-mediated-device.rst +10
-0+ (3) Test source migration_version at target: + + Given a migration_version as outlined above, its compatibility to an + instantiated device of the same mdev type can be tested as: + # echo $VERSION > /sys/bus/mdev/devices/$UUID2/mdev_type/migration_version + + If this write fails, the source and target migration versions are not + compatible or the target does not support migration. + + Compatibility can also be tested prior to target device creation using the
prior to creation of the target device
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 353
Quoted 2 lines
Documentation/driver-api/vfio-mediated-device.rst +2
-0+ mdev type definition for a parent device with a previously found matching mdev + type, for example:
using the migration_version attribute present inside a specific mdev type directory for a given physical parent device.
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 360
Quoted 7 lines
Documentation/driver-api/vfio-mediated-device.rst +7
-0+ + # echo $VERSION > \ + /sys/class/mdev_bus/$PARENT/mdev_supported_types/$MDEV_TYPE/migration_version + + Again, an error writing the migration_version indicates that an instance of + this mdev type would not support a migration from the provided migration + version.
would not support migration from the source.
--
Erik Skultety
Re: [PATCH v5 1/4] vfio/mdev: add migration_version attribute for mdev (under mdev_type node)
Quoted 111 lines · Erik Skultety
Quoted 110 lines · Yan Zhao
migration_versionattribute is used to check migration compatibility between two mdev devices of the same mdev type.
The key is that it's rw and its data is opaque to userspace.Userspace reads
migration_versionof mdev device at source side and writes the value tomigration_versionattribute of mdev device at target side. It judges migration compatibility according to whether the read and write operations succeed or fail.Currently, it is able to read/write
migration_versionattribute under two places:(1) under
mdev_typenode
userspace is able to know whether two mdev devices are compatible before a mdev device is created.userspace also needs to check whether the two mdev devices are of the same mdev type before checking the
migration_versionattribute. It also needs to check device creation parameters if aggregation is supported in future.(2) under mdev device node
userspace is able to know whether two mdev devices are compatible after they are all created. But it does not need to check mdev type and device creation parameter for aggregation as device vendor driver would have incorporated those information into themigration_versionattribute.__ userspace /\ \ / \write / read \ ________/__________ ___\|/_____________ | migration_version | | migration_version |-->check migration --------------------- --------------------- compatibility mdev device A mdev device BThis patch is for mdev documentation about the first place (under
mdev_typenode)Cc Alex Williamson <[email protected]>Cc Erik Skultety <[email protected]>Cc "Dr. David Alan Gilbert" <[email protected]>Cc Cornelia Huck <[email protected]>Cc "Tian, Kevin" <[email protected]>Cc Zhenyu Wang <[email protected]>Cc "Wang, Zhi A" <[email protected]>Cc Neo Jia <[email protected]>Cc Kirti Wankhede <[email protected]>Cc Daniel P. Berrangé <[email protected]>Cc Christophe de Dinechin <[email protected]>Reviewed-by Cornelia Huck <[email protected]>Signed-off-by Yan Zhao <[email protected]>---
v5:
updated commit message a little to indicate this patch is formigration_versionattribute undermdev_typenodev4:
fixed a typo. (Cornelia Huck)v3:
1. renamed version tomigration_version
(Christophe de Dinechin, Cornelia Huck, Alex Williamson)
2. let errno to be freely defined by vendor driver
(Alex Williamson, Erik Skultety, Cornelia Huck, Dr. David Alan Gilbert)
3. let checkingmdev_typebe prerequisite of migration compatibility check. (Alex Williamson)
4. reworded example usage section.
(most of this section came from Alex Williamson)
5. reworded attribute intention section (Cornelia Huck)v2:
1. added detailed intent and usage
2. made definition of version string completely private to vendor driver (Alex Williamson)
3. abandoned changes to sample mdev drivers (Alex Williamson)
4. mandatory --> optional (Cornelia Huck)
5. added description for errno (Cornelia Huck)--- .../driver-api/vfio-mediated-device.rst | 113 ++++++++++++++++++ 1 file changed, 113 insertions(+)Documentation/driver-api/vfio-mediated-device.rst +3
-0@@ -202,6 +202,7 @@ Directories and files under the sysfs for Each Physical Device | | |--- available_instances | | |--- device_api | | |--- description + | | |--- migration_version | | |--- [devices] | |--- [<type-id>] | | |--- create@@ -209,6 +210,7 @@ Directories and files under the sysfs for Each Physical Device | | |--- available_instances | | |--- device_api | | |--- description + | | |--- migration_version | | |--- [devices] | |--- [<type-id>] | |--- create@@ -216,6 +218,7 @@ Directories and files under the sysfs for Each Physical Device | |--- available_instances | |--- device_api | |--- description + | |--- migration_version | |--- [devices]
Quoted 8 lines
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 250
Quoted 4 lines
Documentation/driver-api/vfio-mediated-device.rst +0
-0* [mdev_supported_types]@@ -246,6 +249,116 @@ Directories and files under the sysfs for Each Physical Device This attribute should show the number of devices of type <type-id> that can be created.I've got only a few suggestions to improve to wording in the documentation (feel free to disagree):
hi Erik,
Thanks for your good suggestions. They are better to understand than the original ones:)
I'll update the doc according to them except for below minor one -- may I just put it like this:
* migration_version (rw, optional)
Thanks
Yan
Quoted 182 lines
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 254
Quoted 4 lines
Documentation/driver-api/vfio-mediated-device.rst +3
-0+* migration_version + + This attribute is rw, and is optional.IMO better wording: "This is an optional, RW attribute."
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 259
Quoted 5 lines
Documentation/driver-api/vfio-mediated-device.rst +5
-0+ It is used to check migration compatibility between two mdev devices of the + same mdev type. Absence of this attribute means the device of type <type-id> + does not support migration. + This attribute provides a way to check migration compatibility between two + mdev devices from userspace even before device creation. The intended usage is^This sentence essentially duplicates the information from the first sentence, can we condense it into something like:
"It is used to check the migration compatibility between two mdev devices of the same mdev type. Typically, the target device has not been created yet at the time of userspace using this attribute to check the migration compatibility."
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 266
Quoted 7 lines
Documentation/driver-api/vfio-mediated-device.rst +7
-0+ for userspace to read the migration_version attribute from one mdev device and + then writing that value to the migration_version attribute of the other mdev + device. The second mdev device indicates compatibility via the return code of + the write operation. This makes compatibility between mdev devices completely + vendor-defined and opaque to userspace. Userspace should do nothing more + than verify the mdev types match and then use the migration_version attribute + to confirm source to target compatibility.I'd rephrase the ^last sentence differently:
"Therefore, userspace is only expected to verify that the mdev types of the respective devices match and then use themigration_versionattribute to confirm migration compatibility between the source and target mdev devices."Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 270
Quoted 4 lines
Documentation/driver-api/vfio-mediated-device.rst +4
-0+ + Reading/Writing Attribute Data: + read(2) will fail if device of type <type-id> does not support migration and + otherwise succeed and return migration_version string of the device of"returns a
migration_versionstring of the device on success, fails with an errno if the device doesn't support migration"Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 283
Quoted 13 lines
Documentation/driver-api/vfio-mediated-device.rst +13
-0+ type <type-id>. + + This migration_version string is vendor defined and opaque to the + userspace. Vendor is free to include whatever they feel is relevant. + e.g. <pciid of parent device>-<software version>. + + Restrictions on this migration_version string: + 1. It should only contain ascii characters + 2. MAX Length is PATH_MAX (4096) + + write(2) expects migration_version string of source mdev device, and will + succeed if it is determined to be compatible and otherwise fail with + vendor specific errno."expects a
migration_versionstring of the source mdev device, succeeds if the two mdev devices are migration compatible, otherwise fails with and errno"Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 293
Quoted 10 lines
Documentation/driver-api/vfio-mediated-device.rst +10
-0+ + Errno: + -An errno on read(2) indicates the device of type <type-id> does not support + migration; + -An errno on write(2) indicates the devices are incompatible or the target + doesn't support migration. + Vendor driver is free to define specific errno and is suggested to + print detailed error in syslog for diagnose purpose. + + Userspace should treat ANY of below conditions as two mdev devices notUserspace should treat any of the below conditions as an indication of migration incompatibility between two mdev devices.
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 297
Quoted 4 lines
Documentation/driver-api/vfio-mediated-device.rst +4
-0+ compatible: + (0) The mdev devices are not of the same type + (1) any one of the two mdev devices does not have a migration_version + attributeany of the two mdev devices is missing the
migration_versionattributeDocumentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 298
Quoted 1 line
Documentation/driver-api/vfio-mediated-device.rst +1
-0+ (2) error when reading from migration_version attribute of one mdev devicewhen reading the source mdev's
migration_versionattributeDocumentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 300
Quoted 2 lines
Documentation/driver-api/vfio-mediated-device.rst +2
-0+ (3) error when writing migration_version string of one mdev device to + migration_version attribute of the other mdev devicewhen writing the source mdev
migration_versionstring to the target mdev device'smigration_versionattributeDocumentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 303
Quoted 3 lines
Documentation/driver-api/vfio-mediated-device.rst +3
-0+ + Userspace should regard two mdev devices compatible when ALL of below + conditions are met:Userspace can consider the two mdev devices to be compatible when all of the below conditions are met:
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 305
Quoted 2 lines
Documentation/driver-api/vfio-mediated-device.rst +2
-0+ (0) The mdev devices are of the same type + (1) success when reading from migration_version attribute of one mdev device.reading the
migration_versionattribute of the source succeedsDocumentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 307
Quoted 2 lines
Documentation/driver-api/vfio-mediated-device.rst +2
-0+ (2) success when writing migration_version string of one mdev device to + migration_version attribute of the other mdev device.writing the
migration_versionstring to the target mdev'smigration_versionattribute succeedsDocumentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 310
Quoted 3 lines
Documentation/driver-api/vfio-mediated-device.rst +3
-0+ + Example Usage: + (1) Compare mdev types:Comparing two mdev types:
Quoted 7 lines
Documentation/driver-api/vfio-mediated-device.rst +7
-0+ + The mdev type of an instantiated device can be read from the mdev_type link + within the device instance in sysfs, for example: + + # basename $(readlink -f /sys/bus/mdev/devices/$MDEV_UUID/mdev_type/) + + The mdev types available on a given host system can also be found throughDocumentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 327
Quoted 10 lines
Documentation/driver-api/vfio-mediated-device.rst +10
-0+ /sys/class/mdev_bus, for example: + + # ls /sys/class/mdev_bus/*/mdev_supported_types/ + + Migration is only possible between devices of the same mdev type. + + (2) Retrieve the mdev source migration_version: + + The migration_version information can either be read from the mdev_type link + on an instantiated device:s/information/string
Quoted 14 lines
Documentation/driver-api/vfio-mediated-device.rst +14
-0+ + # cat /sys/bus/mdev/devices/$UUID1/mdev_type/migration_version + + Or it can be read from the mdev type definition, for example: + + # cat /sys/class/mdev_bus/*/mdev_supported_types/$MDEV_TYPE/migration_version + + If reading the source migration_version generates an error, migration is not + possible. + NB, there might be several parent devices for a given mdev type on a host + system, each may support or expose different migration_versions. + Matching the specific mdev type to a parent may become important in such + configurations. +Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 351
Quoted 10 lines
Documentation/driver-api/vfio-mediated-device.rst +10
-0+ (3) Test source migration_version at target: + + Given a migration_version as outlined above, its compatibility to an + instantiated device of the same mdev type can be tested as: + # echo $VERSION > /sys/bus/mdev/devices/$UUID2/mdev_type/migration_version + + If this write fails, the source and target migration versions are not + compatible or the target does not support migration. + + Compatibility can also be tested prior to target device creation using theprior to creation of the target device
Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 353
Quoted 2 lines
Documentation/driver-api/vfio-mediated-device.rst +2
-0+ mdev type definition for a parent device with a previously found matching mdev + type, for example:using the
migration_versionattribute present inside a specific mdev type directory for a given physical parent device.Documentation/driver-api/vfio-mediated-device.rst Directories and files under the sysfs for Each Physical Device · line 360
Quoted 7 lines
Documentation/driver-api/vfio-mediated-device.rst +7
-0+ + # echo $VERSION > \ + /sys/class/mdev_bus/$PARENT/mdev_supported_types/$MDEV_TYPE/migration_version + + Again, an error writing the migration_version indicates that an instance of + this mdev type would not support a migration from the provided migration + version.would not support migration from the source.
--
Erik Skultety
PATCH v5 2/4 drm/i915/gvt: export migration_version to mdev sysfs (under mdev_type node)
In reply to Yan ZhaoThis patch implements the mdev_type part of migration_version attribute for Intel's vGPU mdev devices.
migration_version attribute under mdev_type node is rw.
It is located at /sys/class/mdev_bus/0000:00:02.0/mdev_supported_types/$MDEV_TYPE/ or /sys/devices/pci0000:00/0000:00:02.0/mdev_supported_types/$MDEV_TYPE/
It's used to check migration compatibility for two mdev devices of the same mdev type.migration_version string is defined by vendor driver and opaque to userspace.
For Intel vGPU of gen8 and gen9, the format of migration_version string is:
<vendor id>-<device id>-<vgpu type>-<software version>.
For future platforms, the format of migration_version string is to be expanded to include more meta data to identify Intel vGPUs for live migration compatibility check
For old platforms, and for GVT not supporting vGPU live migration feature, -ENODEV is returned on read(2)/write(2) of migration_version attribute.
For vGPUs running old GVT who do not expose migration_version attribute, live migration is regarded as not supported for those vGPUs.
Cc: Alex Williamson <[email protected]>
Cc: Erik Skultety <[email protected]>
Cc: "Dr. David Alan Gilbert" <[email protected]>
Cc: Cornelia Huck <[email protected]>
Cc: "Tian, Kevin" <[email protected]>
Cc: Zhenyu Wang <[email protected]>
Cc: "Wang, Zhi A" <[email protected]>
c: Neo Jia <[email protected]>
Cc: Kirti Wankhede <[email protected]>
---
v5:
updated commit message to indicate this patch introduces migration_version attributes under mdev_type sysfs directory
v4:
1. fixed Indentation/spell issues and reworded several error messages (Cornelia Huck)
2. added kfree(version) in snprintf failure case (Zhenyu Wang)
v3:
1. renamed version to migration_version
(Christophe de Dinechin, Cornelia Huck, Alex Williamson)
2. instead of generating migration version strings each time, storing them in vgpu types generated during initialization.
(Zhenyu Wang, Cornelia Huck)
3. replaced multiple snprintf to one big snprintf in intel_gvt_get_vfio_migration_version()
(Dr. David Alan Gilbert)
4. printed detailed error log
(Alex Williamson, Erik Skultety, Cornelia Huck, Dr. David Alan Gilbert)
5. incorporated <software version> into migration_version string (Alex Williamson)
6. do not use ifndef macro to switch off migration_version attribute (Zhenyu Wang)
v2:
1. removed 32 common part of version string
(Alex Williamson)
2. do not register version attribute for GVT not supporting live migration.(Cornelia Huck)
3. for platforms out of gen8, gen9, return -EINVAL --> -ENODEV for incompatible. (Cornelia Huck)
--- drivers/gpu/drm/i915/gvt/Makefile | 2 +- drivers/gpu/drm/i915/gvt/gvt.c | 39 +++++ drivers/gpu/drm/i915/gvt/gvt.h | 5 + drivers/gpu/drm/i915/gvt/migration_version.c | 170 +++++++++++++++++++ drivers/gpu/drm/i915/gvt/vgpu.c | 13 +- 5 files changed, 226 insertions(+), 3 deletions(-) create mode 100644 drivers/gpu/drm/i915/gvt/migration_version.c
drivers/gpu/drm/i915/gvt/Makefile +1 -1
@@ -3,7 +3,7 @@ GVT_DIR := gvt GVT_SOURCE := gvt.o aperture_gm.o handlers.o vgpu.o trace_points.o firmware.o \ interrupt.o gtt.o cfg_space.o opregion.o mmio.o display.o edid.o \ execlist.o scheduler.o sched_policy.o mmio_context.o cmd_parser.o debugfs.o \ - fb_decoder.o dmabuf.o page_track.o migrate.o + fb_decoder.o dmabuf.o page_track.o migrate.o migration_version.o ccflags-y += -I $(srctree)/$(src) -I $(srctree)/$(src)/$(GVT_DIR)/ i915-y += $(addprefix $(GVT_DIR)/, $(GVT_SOURCE))
drivers/gpu/drm/i915/gvt/gvt.c +39 -0
@@ -106,14 +106,53 @@ static ssize_t description_show(struct kobject *kobj, struct device *dev, type->weight); } +static ssize_t migration_version_show (struct kobject *kobj,struct device *dev, +char *buf) +{ +struct intel_vgpu_type *type; +void *gvt =kdev_to_i915 (dev)->gvt; + + type =intel_gvt_find_vgpu_type (gvt,kobject_name (kobj)); +if (!type || !type->migration_version) { +gvt_err ("Migration not supported on type %s. Please search previous detailed log\n" , +kobject_name (kobj)); +return -ENODEV ; + } + +return snprintf (buf,strlen (type->migration_version) +2 , +"%s\n" , type->migration_version); +} + +static ssize_t migration_version_store (struct kobject *kobj,struct device *dev, +const char *buf,size_t count) +{ +int ret =0 ; +struct intel_vgpu_type *type; +void *gvt =kdev_to_i915 (dev)->gvt; + + type =intel_gvt_find_vgpu_type (gvt,kobject_name (kobj)); +if (!type || !type->migration_version) { +gvt_err ("Migration not supported on type %s. Please search previous detailed log\n" , +kobject_name (kobj)); +return -ENODEV ; + } + + ret =intel_gvt_check_vfio_migration_version (gvt, + type->migration_version, buf); + +return (ret <0 ? ret : count); +} +static MDEV_TYPE_ATTR_RO (available_instances);static MDEV_TYPE_ATTR_RO (device_api);static MDEV_TYPE_ATTR_RO (description); +static MDEV_TYPE_ATTR_RW (migration_version);static struct attribute *gvt_type_attrs[] = { &mdev_type_attr_available_instances.attr, &mdev_type_attr_device_api.attr, &mdev_type_attr_description.attr, + &mdev_type_attr_migration_version.attr,NULL , };
drivers/gpu/drm/i915/gvt/gvt.h +5 -0
@@ -277,6 +277,7 @@ struct intel_vgpu_type {unsigned int fence;unsigned int weight;enum intel_vgpu_edid resolution; +char *migration_version; };struct intel_gvt {
@@ -709,6 +710,10 @@ int submit_context(struct intel_vgpu *vgpu,struct execlist_ctx_descriptor_format *desc, bool emulate_schedule_in); +ssize_t intel_gvt_check_vfio_migration_version (struct intel_gvt *gvt, +const char *self,const char *remote); +char *intel_gvt_get_vfio_migration_version (struct intel_gvt *gvt, +const char *vgpu_type);#include "trace.h" #include "mpt.h"
drivers/gpu/drm/i915/gvt/migration_version.c new file +170 -0
170 lines not on this page · raw message
drivers/gpu/drm/i915/gvt/vgpu.c +11 -2
@@ -155,13 +155,18 @@ int intel_gvt_init_vgpu_types(struct intel_gvt *gvt)sprintf (gvt->types[i].name,"GVTg_V5_%s" , vgpu_types[i].name); -gvt_dbg_core ("type[%d]: %s avail %u low %u high %u fence %u weight %u res %s\n" , + gvt->types[i].migration_version = +intel_gvt_get_vfio_migration_version (gvt, + gvt->types[i].name); +gvt_dbg_core ("type[%d]: %s avail %u low %u high %u fence %u weight %u res %s, migratio_version:%s\n" , i, gvt->types[i].name, gvt->types[i].avail_instance, gvt->types[i].low_gm_size, gvt->types[i].high_gm_size, gvt->types[i].fence, gvt->types[i].weight, -vgpu_edid_str (gvt->types[i].resolution)); +vgpu_edid_str (gvt->types[i].resolution), + (gvt->types[i].migration_version ? + gvt->types[i].migration_version :"null" )); } gvt->num_types = i;
@@ -170,6 +175,10 @@ int intel_gvt_init_vgpu_types(struct intel_gvt *gvt)void intel_gvt_clean_vgpu_types (struct intel_gvt *gvt) { +int i; + +for (i =0 ; i < gvt->num_types; i++) +kfree (gvt->types[i].migration_version);kfree (gvt->types); }
Signature · 1 line
2.17.1
PATCH v5 3/4 vfio/mdev: add migration_version attribute for mdev (under mdev device node)
In reply to Yan Zhaomigration_version attribute is used to check migration compatibility between two mdev devices of the same mdev type.
The key is that it's rw and its data is opaque to userspace.
Userspace reads migration_version of mdev device at source side and writes the value to migration_version attribute of mdev device at target side. It judges migration compatibility according to whether the read and write operations succeed or fail.
Currently, it is able to read/write migration_version attribute under two places:
(1) under mdev_type node
userspace is able to know whether two mdev devices are compatible before a mdev device is created.
userspace also needs to check whether the two mdev devices are of the same mdev type before checking the migration_version attribute. It also needs to check device creation parameters if aggregation is supported in future.
(2) under mdev device node
userspace is able to know whether two mdev devices are compatible after they are all created. But it does not need to check mdev type and device creation parameter for aggregation as device vendor driver would have incorporated those information into the migration_version attribute.
__ userspace
/\ \
/ \write
/ read \
________/__________ ___\|/_____________
| migration_version | | migration_version |-->check migration
--------------------- --------------------- compatibility
mdev device A mdev device BThis patch is for mdev documentation about the second place (under mdev device node)
--- .../driver-api/vfio-mediated-device.rst | 70 +++++++++++++++++++ 1 file changed, 70 insertions(+)
Documentation/driver-api/vfio-mediated-device.rst +70 -0
@@ -383,6 +383,7 @@ Directories and Files Under the sysfs for Each mdev Device |--- remove |--- mdev_type {link to its type} |--- vendor-specific-attributes [optional] + |--- migration_verion [optional] * remove (write only)
@@ -394,6 +395,75 @@ Example:: # echo 1 > /sys/bus/mdev/devices/$mdev_UUID/remove +* migration_version (rw, optional) + It is used to check migration compatibility between two mdev devices. + Absence of this attribute means the mdev device does not support migration. + + This attribute provides a way to check migration compatibility between two + mdev devices from userspace after device created. The intended usage is + for userspace to read the migration_version attribute from one mdev device and + then writing that value to the migration_version attribute of the other mdev + device. The second mdev device indicates compatibility via the return code of + the write operation. This makes compatibility between mdev devices completely + vendor-defined and opaque to userspace. Userspace should do nothing more + than use the migration_version attribute to confirm source to target + compatibility. + + Reading/Writing Attribute Data: + read(2) will fail if a mdev device does not support migration and otherwise + succeed and return migration_version string of the mdev device. + + This migration_version string is vendor defined and opaque to the + userspace. Vendor is free to include whatever they feel is relevant. + e.g. <pciid of parent device>-<software version>. + + Restrictions on this migration_version string: + 1. It should only contain ascii characters + 2. MAX Length is PATH_MAX (4096) + + write(2) expects migration_version string of source mdev device, and will + succeed if it is determined to be compatible and otherwise fail with + vendor specific errno. + + Errno: + -An errno on read(2) indicates the mdev devicedoes not support migration; + -An errno on write(2) indicates the mdev devices are incompatible or the + target doesn't support migration. + Vendor driver is free to define specific errno and is suggested to + print detailed error in syslog for diagnose purpose. + + Userspace should treat ANY of below conditions as two mdev devices not + compatible: + (1) any one of the two mdev devices does not have a migration_version + attribute + (2) error when reading from migration_version attribute of one mdev device + (3) error when writing migration_version string of one mdev device to + migration_version attribute of the other mdev device + + Userspace should regard two mdev devices compatible when ALL of below + conditions are met: + (1) success when reading from migration_version attribute of one mdev device. + (2) success when writing migration_version string of one mdev device to + migration_version attribute of the other mdev device. + + Example Usage: + (1) Retrieve the mdev source migration_version: + + # cat /sys/bus/mdev/devices/$mdev_UUID1/migration_version + + If reading the source migration_version generates an error, migration is not + possible. + + (2) Test source migration_version at target: + + Given a migration_version as outlined above, its compatibility to an + instantiated device of the same mdev type can be tested as: + # echo $VERSION > /sys/bus/mdev/devices/$mdev_UUID2/migration_version + + If this write fails, the source and target migration versions are not + compatible or the target does not support migration. + + Mediated device Hot plug ------------------------
Signature · 1 line
2.17.1
Re: [PATCH v5 3/4] vfio/mdev: add migration_version attribute for mdev (under mdev device node)
Quoted 68 lines · Yan Zhao
migration_versionattribute is used to check migration compatibility between two mdev devices of the same mdev type.
The key is that it's rw and its data is opaque to userspace.Userspace reads
migration_versionof mdev device at source side and writes the value tomigration_versionattribute of mdev device at target side. It judges migration compatibility according to whether the read and write operations succeed or fail.Currently, it is able to read/write
migration_versionattribute under two places:(1) under
mdev_typenode
userspace is able to know whether two mdev devices are compatible before a mdev device is created.userspace also needs to check whether the two mdev devices are of the same mdev type before checking the
migration_versionattribute. It also needs to check device creation parameters if aggregation is supported in future.(2) under mdev device node
userspace is able to know whether two mdev devices are compatible after they are all created. But it does not need to check mdev type and device creation parameter for aggregation as device vendor driver would have incorporated those information into themigration_versionattribute.__ userspace /\ \ / \write / read \ ________/__________ ___\|/_____________ | migration_version | | migration_version |-->check migration --------------------- --------------------- compatibility mdev device A mdev device BThis patch is for mdev documentation about the second place (under mdev device node)
Cc Alex Williamson <[email protected]>Cc Erik Skultety <[email protected]>Cc "Dr. David Alan Gilbert" <[email protected]>Cc Cornelia Huck <[email protected]>Cc "Tian, Kevin" <[email protected]>Cc Zhenyu Wang <[email protected]>Cc "Wang, Zhi A" <[email protected]>Cc Neo Jia <[email protected]>Cc Kirti Wankhede <[email protected]>Cc Daniel P. Berrangé <[email protected]>Cc Christophe de Dinechin <[email protected]>Signed-off-by Yan Zhao <[email protected]>--- .../driver-api/vfio-mediated-device.rst | 70 +++++++++++++++++++ 1 file changed, 70 insertions(+)Documentation/driver-api/vfio-mediated-device.rst +1
-0@@ -383,6 +383,7 @@ Directories and Files Under the sysfs for Each mdev Device |--- remove |--- mdev_type {link to its type} |--- vendor-specific-attributes [optional] + |--- migration_verion [optional] * remove (write only)
Documentation/driver-api/vfio-mediated-device.rst Example:: · line 398
Quoted 4 lines
Documentation/driver-api/vfio-mediated-device.rst +1
-0@@ -394,6 +395,75 @@ Example:: # echo 1 > /sys/bus/mdev/devices/$mdev_UUID/remove +* migration_version (rw, optional)
Hmm, ^this is not consistent with how patch 1/5 reports this information, but looking at the existing docs we're not doing very well in terms of consistency there either.
I suggest we go with "(read-write)" in both patch 1/5 and here and then start the paragraph with "This is an optional attribute."
Documentation/driver-api/vfio-mediated-device.rst Example:: · line 403
Quoted 5 lines
Documentation/driver-api/vfio-mediated-device.rst +5
-0+ It is used to check migration compatibility between two mdev devices. + Absence of this attribute means the mdev device does not support migration. + + This attribute provides a way to check migration compatibility between two + mdev devices from userspace after device created. The intended usage is
after the target device has been created.
side note: maybe add something like "(see the migration_version attribute of the device node if the target device already exists)" in the same section in patch 1/5.
Quoted 7 lines
Documentation/driver-api/vfio-mediated-device.rst +7
-0+ for userspace to read the migration_version attribute from one mdev device and + then writing that value to the migration_version attribute of the other mdev + device. The second mdev device indicates compatibility via the return code of + the write operation. This makes compatibility between mdev devices completely + vendor-defined and opaque to userspace. Userspace should do nothing more + than use the migration_version attribute to confirm source to target + compatibility.
...
Quoted 9 lines
Documentation/driver-api/vfio-mediated-device.rst +9
-0+ + Reading/Writing Attribute Data: + read(2) will fail if a mdev device does not support migration and otherwise + succeed and return migration_version string of the mdev device. + + This migration_version string is vendor defined and opaque to the + userspace. Vendor is free to include whatever they feel is relevant. + e.g. <pciid of parent device>-<software version>. +
Documentation/driver-api/vfio-mediated-device.rst Example:: · line 429
Quoted 10 lines
Documentation/driver-api/vfio-mediated-device.rst +10
-0+ Restrictions on this migration_version string: + 1. It should only contain ascii characters + 2. MAX Length is PATH_MAX (4096) + + write(2) expects migration_version string of source mdev device, and will + succeed if it is determined to be compatible and otherwise fail with + vendor specific errno. + + Errno: + -An errno on read(2) indicates the mdev devicedoes not support migration;
s/devicedoes/device does/
Quoted 29 lines
Documentation/driver-api/vfio-mediated-device.rst +29
-0+ -An errno on write(2) indicates the mdev devices are incompatible or the + target doesn't support migration. + Vendor driver is free to define specific errno and is suggested to + print detailed error in syslog for diagnose purpose. + + Userspace should treat ANY of below conditions as two mdev devices not + compatible: + (1) any one of the two mdev devices does not have a migration_version + attribute + (2) error when reading from migration_version attribute of one mdev device + (3) error when writing migration_version string of one mdev device to + migration_version attribute of the other mdev device + + Userspace should regard two mdev devices compatible when ALL of below + conditions are met: + (1) success when reading from migration_version attribute of one mdev device. + (2) success when writing migration_version string of one mdev device to + migration_version attribute of the other mdev device. + + Example Usage: + (1) Retrieve the mdev source migration_version: + + # cat /sys/bus/mdev/devices/$mdev_UUID1/migration_version + + If reading the source migration_version generates an error, migration is not + possible. + + (2) Test source migration_version at target: +
Documentation/driver-api/vfio-mediated-device.rst Example:: · line 468
Quoted 10 lines
Documentation/driver-api/vfio-mediated-device.rst +8
-0+ Given a migration_version as outlined above, its compatibility to an + instantiated device of the same mdev type can be tested as: + # echo $VERSION > /sys/bus/mdev/devices/$mdev_UUID2/migration_version + + If this write fails, the source and target migration versions are not + compatible or the target does not support migration. + + Mediated device Hot plug ------------------------
Overall, the same comments as in 1/5 apply text-wise.
Regards,
--
Erik Skultety
Re: [PATCH v5 3/4] vfio/mdev: add migration_version attribute for mdev (under mdev device node)
Quoted 72 lines · Erik Skultety
Quoted 71 lines · Yan Zhao
migration_versionattribute is used to check migration compatibility between two mdev devices of the same mdev type.
The key is that it's rw and its data is opaque to userspace.Userspace reads
migration_versionof mdev device at source side and writes the value tomigration_versionattribute of mdev device at target side. It judges migration compatibility according to whether the read and write operations succeed or fail.Currently, it is able to read/write
migration_versionattribute under two places:(1) under
mdev_typenode
userspace is able to know whether two mdev devices are compatible before a mdev device is created.userspace also needs to check whether the two mdev devices are of the same mdev type before checking the
migration_versionattribute. It also needs to check device creation parameters if aggregation is supported in future.(2) under mdev device node
userspace is able to know whether two mdev devices are compatible after they are all created. But it does not need to check mdev type and device creation parameter for aggregation as device vendor driver would have incorporated those information into themigration_versionattribute.__ userspace /\ \ / \write / read \ ________/__________ ___\|/_____________ | migration_version | | migration_version |-->check migration --------------------- --------------------- compatibility mdev device A mdev device BThis patch is for mdev documentation about the second place (under mdev device node)
Cc Alex Williamson <[email protected]>Cc Erik Skultety <[email protected]>Cc "Dr. David Alan Gilbert" <[email protected]>Cc Cornelia Huck <[email protected]>Cc "Tian, Kevin" <[email protected]>Cc Zhenyu Wang <[email protected]>Cc "Wang, Zhi A" <[email protected]>Cc Neo Jia <[email protected]>Cc Kirti Wankhede <[email protected]>Cc Daniel P. Berrangé <[email protected]>Cc Christophe de Dinechin <[email protected]>Signed-off-by Yan Zhao <[email protected]>--- .../driver-api/vfio-mediated-device.rst | 70 +++++++++++++++++++ 1 file changed, 70 insertions(+)Documentation/driver-api/vfio-mediated-device.rst +1
-0@@ -383,6 +383,7 @@ Directories and Files Under the sysfs for Each mdev Device |--- remove |--- mdev_type {link to its type} |--- vendor-specific-attributes [optional] + |--- migration_verion [optional] * remove (write only)@@ -394,6 +395,75 @@ Example:: # echo 1 > /sys/bus/mdev/devices/$mdev_UUID/remove
Quoted 9 lines
Documentation/driver-api/vfio-mediated-device.rst Example:: · line 398
Quoted 1 line
Documentation/driver-api/vfio-mediated-device.rst +1
-0+* migration_version (rw, optional)Hmm, ^this is not consistent with how patch 1/5 reports this information, but looking at the existing docs we're not doing very well in terms of consistency there either.
I suggest we go with "(read-write)" in both patch 1/5 and here and then start the paragraph with "This is an optional attribute."
ok. got it.
Quoted 11 lines
Documentation/driver-api/vfio-mediated-device.rst Example:: · line 403
Quoted 5 lines
Documentation/driver-api/vfio-mediated-device.rst +5
-0+ It is used to check migration compatibility between two mdev devices. + Absence of this attribute means the mdev device does not support migration. + + This attribute provides a way to check migration compatibility between two + mdev devices from userspace after device created. The intended usage isafter the target device has been created.
side note: maybe add something like "(see the
migration_versionattribute of the device node if the target device already exists)" in the same section in patch 1/5.
ok. good idea.
Quoted 24 lines
Quoted 8 lines
Documentation/driver-api/vfio-mediated-device.rst +7
-0+ for userspace to read the migration_version attribute from one mdev device and + then writing that value to the migration_version attribute of the other mdev + device. The second mdev device indicates compatibility via the return code of + the write operation. This makes compatibility between mdev devices completely + vendor-defined and opaque to userspace. Userspace should do nothing more + than use the migration_version attribute to confirm source to target + compatibility....
Quoted 13 lines
Documentation/driver-api/vfio-mediated-device.rst +13
-0+ + Reading/Writing Attribute Data: + read(2) will fail if a mdev device does not support migration and otherwise + succeed and return migration_version string of the mdev device. + + This migration_version string is vendor defined and opaque to the + userspace. Vendor is free to include whatever they feel is relevant. + e.g. <pciid of parent device>-<software version>. + + Restrictions on this migration_version string: + 1. It should only contain ascii characters + 2. MAX Length is PATH_MAX (4096) +
Quoted 9 lines
Documentation/driver-api/vfio-mediated-device.rst Example:: · line 429
Quoted 6 lines
Documentation/driver-api/vfio-mediated-device.rst +6
-0+ write(2) expects migration_version string of source mdev device, and will + succeed if it is determined to be compatible and otherwise fail with + vendor specific errno. + + Errno: + -An errno on read(2) indicates the mdev devicedoes not support migration;s/devicedoes/device does/
sorry for such kind of errors.
Quoted 33 lines
Quoted 33 lines
Documentation/driver-api/vfio-mediated-device.rst +33
-0+ -An errno on write(2) indicates the mdev devices are incompatible or the + target doesn't support migration. + Vendor driver is free to define specific errno and is suggested to + print detailed error in syslog for diagnose purpose. + + Userspace should treat ANY of below conditions as two mdev devices not + compatible: + (1) any one of the two mdev devices does not have a migration_version + attribute + (2) error when reading from migration_version attribute of one mdev device + (3) error when writing migration_version string of one mdev device to + migration_version attribute of the other mdev device + + Userspace should regard two mdev devices compatible when ALL of below + conditions are met: + (1) success when reading from migration_version attribute of one mdev device. + (2) success when writing migration_version string of one mdev device to + migration_version attribute of the other mdev device. + + Example Usage: + (1) Retrieve the mdev source migration_version: + + # cat /sys/bus/mdev/devices/$mdev_UUID1/migration_version + + If reading the source migration_version generates an error, migration is not + possible. + + (2) Test source migration_version at target: + + Given a migration_version as outlined above, its compatibility to an + instantiated device of the same mdev type can be tested as: + # echo $VERSION > /sys/bus/mdev/devices/$mdev_UUID2/migration_version +
Quoted 9 lines
Documentation/driver-api/vfio-mediated-device.rst Example:: · line 468
Quoted 6 lines
Documentation/driver-api/vfio-mediated-device.rst +4
-0+ If this write fails, the source and target migration versions are not + compatible or the target does not support migration. + + Mediated device Hot plug ------------------------Overall, the same comments as in 1/5 apply text-wise.
got it. will align it with the first patch.
Thanks
Yan
Quoted 4 lines
Regards,
--
Erik Skultety
PATCH v5 4/4 drm/i915/gvt: export migration_version to mdev sysfs (under mdev device node)
In reply to Yan Zhaomdev device par of migration_version attribute for Intel vGPU is rw. It is located at /sys/bus/pci/devices/0000\:00\:02.0/$mdev_UUID/migration_version, or /sys/bus/mdev/devices/$mdev_UUID/migration_version
It's used to check migration compatibility for two vGPUs. migration_version string is defined by vendor driver and opaque to userspace.
For Intel vGPU of gen8 and gen9, the format of migration_version string is:
<vendor id>-<device id>-<vgpu type>-<software version>.
For future software versions, e.g. when vGPUs have aggregations, it may also include aggregation count into migration_version string of a vGPU.
For future platforms, the format of migration_version string is to be expanded to include more meta data to identify Intel vGPUs for live migration compatibility check
For old platforms, and for GVT not supporting vGPU live migration feature, -ENODEV is returned on read(2)/write(2) of migration_version attribute.
For vGPUs running old GVT who do not expose migration_version attribute, live migration is regarded as not supported for those vGPUs.
Cc: Alex Williamson <[email protected]>
Cc: Erik Skultety <[email protected]>
Cc: "Dr. David Alan Gilbert" <[email protected]>
Cc: Cornelia Huck <[email protected]>
Cc: "Tian, Kevin" <[email protected]>
Cc: Zhenyu Wang <[email protected]>
Cc: "Wang, Zhi A" <[email protected]>
c: Neo Jia <[email protected]>
Cc: Kirti Wankhede <[email protected]>
--- drivers/gpu/drm/i915/gvt/gvt.h | 2 ++ drivers/gpu/drm/i915/gvt/kvmgt.c | 55 ++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+)
drivers/gpu/drm/i915/gvt/gvt.h +2 -0
@@ -205,6 +205,8 @@ struct intel_vgpu {struct idr object_idr;u32 scan_nonprivbb; + +char *migration_version; };static inline void *intel_vgpu_vdev (struct intel_vgpu *vgpu)
drivers/gpu/drm/i915/gvt/kvmgt.c +55 -0
77 lines not on this page · raw message
Signature · 1 line
2.17.1
Quoted 6 lines · On Mon, 13 Apr 2020 01:52:01 -0400 Yan Zhao <[email protected]> wrote:
This patchset introduces a
migration_versionattribute under sysfs of VFIO Mediated devices.This
migration_versionattribute is used to check migration compatibility between two mdev devices.
Quoted 9 lines
Currently, it has two locations:
(1) undermdev_typenode,
which can be used even before device creation, but only for mdev devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, but the src and target mdev devices are not necessarily be of the same mdev type
(The second location is newly added in v5, in order to keep consistent with themigration_versionnode for migratable pass-though devices)
What is the relationship between those two attributes?
Is existence (and compatibility) of (1) a pre-req for possible existence (and compatibility) of (2)?
Does userspace need to check (1) or can it completely rely on (2), if it so chooses?
If devices with a different mdev type are indeed compatible, it seems userspace can only find out after the devices have actually been created, as (1) does not apply?
One of my worries is that the existence of an attribute with the same name in two similar locations might lead to confusion. But maybe it isn't a problem.
Quoted 62 lines
Patch 1 defines
migration_versionattribute for the first location inDocumentation/vfio-mediated-device.txtPatch 2 uses GVT as an example for patch 1 to show how to expose
migration_versionattribute and check migration compatibility in vendor driver.Patch 3 defines
migration_versionattribute for the second location inDocumentation/vfio-mediated-device.txtPatch 4 uses GVT as an example for patch 3 to show how to expose
migration_versionattribute and check migration compatibility in vendor driver.(The previous "Reviewed-by" and "Acked-by" for patch 1 and patch 2 are kept in v5, as there are only small changes to commit messages of the two patches.)
v5:
added patch 2 and 4 for mdev device part ofmigration_versionattribute.v4:
1. fixed indentation/spell errors, reworded several error messages
2. added a missing memory free for error handling in patch 2v3:
1. renamed version tomigration_version
2. let errno to be freely defined by vendor driver
3. let checkingmdev_typebe prerequisite of migration compatibility check
4. reworded most part of patch 1
5. print detailed error log in patch 2 and generatemigration_versionstring at init timev2:
1. renamed patched 1
2. made definition of device version string completely private to vendor driver
3. reverted changes to sample mdev drivers
4. described intent and usage of version attribute more clearly.Yan Zhao (4):
vfio/mdev: addmigration_versionattribute for mdev (undermdev_type
node)
drm/i915/gvt: exportmigration_versionto mdev sysfs (undermdev_type
node)
vfio/mdev: addmigration_versionattribute for mdev (under mdev device
node)
drm/i915/gvt: exportmigration_versionto mdev sysfs (under mdev
device node).../driver-api/vfio-mediated-device.rst | 183 ++++++++++++++++++ drivers/gpu/drm/i915/gvt/Makefile | 2 +- drivers/gpu/drm/i915/gvt/gvt.c | 39 ++++ drivers/gpu/drm/i915/gvt/gvt.h | 7 + drivers/gpu/drm/i915/gvt/kvmgt.c | 55 ++++++ drivers/gpu/drm/i915/gvt/migration_version.c | 170 ++++++++++++++++ drivers/gpu/drm/i915/gvt/vgpu.c | 13 +- 7 files changed, 466 insertions(+), 3 deletions(-) create mode 100644 drivers/gpu/drm/i915/gvt/migration_version.c
Quoted 19 lines · Cornelia Huck
Quoted 6 lines · On Mon, 13 Apr 2020 01:52:01 -0400 Yan Zhao <[email protected]> wrote:
This patchset introduces a
migration_versionattribute under sysfs of VFIO Mediated devices.This
migration_versionattribute is used to check migration compatibility between two mdev devices.Quoted 9 lines
Currently, it has two locations:
(1) undermdev_typenode,
which can be used even before device creation, but only for mdev devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, but the src and target mdev devices are not necessarily be of the same mdev type
(The second location is newly added in v5, in order to keep consistent with themigration_versionnode for migratable pass-though devices)
Quoted 2 lines
What is the relationship between those two attributes?
(1) is for mdev devices specifically, and (2) is provided to keep the same sysfs interface as with non-mdev cases. so (2) is for both mdev devices and non-mdev devices.
in future, if we enable vfio-pci vendor ops, (i.e. a non-mdev device is binding to vfio-pci, but is able to register migration region and do migration transactions from a vendor provided affiliate driver), the vendor driver would export (2) directly, under device node. It is not able to provide (1) as there're no mdev devices involved.
Quoted 3 lines
Is existence (and compatibility) of (1) a pre-req for possible existence (and compatibility) of (2)?
no. (2) does not reply on (1).
Quoted 3 lines
Does userspace need to check (1) or can it completely rely on (2), if it so chooses?
I think it can completely reply on (2) if compatibility check before mdev creation is not required.
Quoted 3 lines
If devices with a different mdev type are indeed compatible, it seems userspace can only find out after the devices have actually been created, as (1) does not apply?
yes, I think so.
Quoted 4 lines
One of my worries is that the existence of an attribute with the same name in two similar locations might lead to confusion. But maybe it isn't a problem.
Yes, I have the same feeling. but as (2) is for sysfs interface consistency, to make it transparent to userspace tools like libvirt, I guess the same name is necessary?
Thanks
Yan
Quoted 63 lines
Quoted 62 lines
Patch 1 defines
migration_versionattribute for the first location inDocumentation/vfio-mediated-device.txtPatch 2 uses GVT as an example for patch 1 to show how to expose
migration_versionattribute and check migration compatibility in vendor driver.Patch 3 defines
migration_versionattribute for the second location inDocumentation/vfio-mediated-device.txtPatch 4 uses GVT as an example for patch 3 to show how to expose
migration_versionattribute and check migration compatibility in vendor driver.(The previous "Reviewed-by" and "Acked-by" for patch 1 and patch 2 are kept in v5, as there are only small changes to commit messages of the two patches.)
v5:
added patch 2 and 4 for mdev device part ofmigration_versionattribute.v4:
1. fixed indentation/spell errors, reworded several error messages
2. added a missing memory free for error handling in patch 2v3:
1. renamed version tomigration_version
2. let errno to be freely defined by vendor driver
3. let checkingmdev_typebe prerequisite of migration compatibility check
4. reworded most part of patch 1
5. print detailed error log in patch 2 and generatemigration_versionstring at init timev2:
1. renamed patched 1
2. made definition of device version string completely private to vendor driver
3. reverted changes to sample mdev drivers
4. described intent and usage of version attribute more clearly.Yan Zhao (4):
vfio/mdev: addmigration_versionattribute for mdev (undermdev_type
node)
drm/i915/gvt: exportmigration_versionto mdev sysfs (undermdev_type
node)
vfio/mdev: addmigration_versionattribute for mdev (under mdev device
node)
drm/i915/gvt: exportmigration_versionto mdev sysfs (under mdev
device node).../driver-api/vfio-mediated-device.rst | 183 ++++++++++++++++++ drivers/gpu/drm/i915/gvt/Makefile | 2 +- drivers/gpu/drm/i915/gvt/gvt.c | 39 ++++ drivers/gpu/drm/i915/gvt/gvt.h | 7 + drivers/gpu/drm/i915/gvt/kvmgt.c | 55 ++++++ drivers/gpu/drm/i915/gvt/migration_version.c | 170 ++++++++++++++++ drivers/gpu/drm/i915/gvt/vgpu.c | 13 +- 7 files changed, 466 insertions(+), 3 deletions(-) create mode 100644 drivers/gpu/drm/i915/gvt/migration_version.c
Quoted 26 lines · On Fri, 17 Apr 2020 05:52:02 -0400 Yan Zhao <[email protected]> wrote:
Quoted 19 lines · Cornelia Huck
Quoted 6 lines · On Mon, 13 Apr 2020 01:52:01 -0400 Yan Zhao <[email protected]> wrote:
This patchset introduces a
migration_versionattribute under sysfs of VFIO Mediated devices.This
migration_versionattribute is used to check migration compatibility between two mdev devices.Quoted 9 lines
Currently, it has two locations:
(1) undermdev_typenode,
which can be used even before device creation, but only for mdev devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, but the src and target mdev devices are not necessarily be of the same mdev type
(The second location is newly added in v5, in order to keep consistent with themigration_versionnode for migratable pass-though devices)Quoted 2 lines
What is the relationship between those two attributes?
(1) is for mdev devices specifically, and (2) is provided to keep the same sysfs interface as with non-mdev cases. so (2) is for both mdev devices and non-mdev devices.
Quoted 5 lines
in future, if we enable vfio-pci vendor ops, (i.e. a non-mdev device is binding to vfio-pci, but is able to register migration region and do migration transactions from a vendor provided affiliate driver), the vendor driver would export (2) directly, under device node. It is not able to provide (1) as there're no mdev devices involved.
Ok, creating an alternate attribute for non-mdev devices makes sense. However, wouldn't that rather be a case (3)? The change here only refers to mdev devices.
Quoted 5 lines
Quoted 4 lines
Is existence (and compatibility) of (1) a pre-req for possible existence (and compatibility) of (2)?
no. (2) does not reply on (1).
Hm. Non-existence of (1) seems to imply "this type does not support migration". If an mdev created for such a type suddenly does support migration, it feels a bit odd.
(It obviously cannot be a prereq for what I called (3) above.)
Quoted 11 lines
Quoted 4 lines
Does userspace need to check (1) or can it completely rely on (2), if it so chooses?
I think it can completely reply on (2) if compatibility check before mdev creation is not required.
Quoted 3 lines
If devices with a different mdev type are indeed compatible, it seems userspace can only find out after the devices have actually been created, as (1) does not apply?
yes, I think so.
How useful would it be for userspace to even look at (1) in that case? It only knows if things have a chance of working if it actually goes ahead and creates devices.
Quoted 8 lines
Quoted 5 lines
One of my worries is that the existence of an attribute with the same name in two similar locations might lead to confusion. But maybe it isn't a problem.
Yes, I have the same feeling. but as (2) is for sysfs interface consistency, to make it transparent to userspace tools like libvirt, I guess the same name is necessary?
What do we actually need here, I wonder? (1) and (2) seem to serve slightly different purposes, while (2) and what I called (3) have the same purpose. Is it important to userspace that (1) and (2) have the same name?
Quoted 35 lines · Cornelia Huck
Quoted 26 lines · On Fri, 17 Apr 2020 05:52:02 -0400 Yan Zhao <[email protected]> wrote:
Quoted 19 lines · Cornelia Huck
Quoted 6 lines · On Mon, 13 Apr 2020 01:52:01 -0400 Yan Zhao <[email protected]> wrote:
This patchset introduces a
migration_versionattribute under sysfs of VFIO Mediated devices.This
migration_versionattribute is used to check migration compatibility between two mdev devices.Quoted 9 lines
Currently, it has two locations:
(1) undermdev_typenode,
which can be used even before device creation, but only for mdev devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, but the src and target mdev devices are not necessarily be of the same mdev type
(The second location is newly added in v5, in order to keep consistent with themigration_versionnode for migratable pass-though devices)Quoted 2 lines
What is the relationship between those two attributes?
(1) is for mdev devices specifically, and (2) is provided to keep the same sysfs interface as with non-mdev cases. so (2) is for both mdev devices and non-mdev devices.
Quoted 5 lines
in future, if we enable vfio-pci vendor ops, (i.e. a non-mdev device is binding to vfio-pci, but is able to register migration region and do migration transactions from a vendor provided affiliate driver), the vendor driver would export (2) directly, under device node. It is not able to provide (1) as there're no mdev devices involved.
Quoted 4 lines
Ok, creating an alternate attribute for non-mdev devices makes sense. However, wouldn't that rather be a case (3)? The change here only refers to mdev devices.
as you pointed below, (3) and (2) serve the same purpose. and I think a possible usage is to migrate between a non-mdev device and an mdev device. so I think it's better for them both to use (2) rather than creating (3).
Quoted 10 lines
Quoted 5 lines
Quoted 4 lines
Is existence (and compatibility) of (1) a pre-req for possible existence (and compatibility) of (2)?
no. (2) does not reply on (1).
Hm. Non-existence of (1) seems to imply "this type does not support migration". If an mdev created for such a type suddenly does support migration, it feels a bit odd.
yes. but I think if the condition happens, it should be reported a bug to vendor driver.
should I add a line in the doc like "vendor driver should ensure that the migration compatibility from migration_version under mdev_type should be consistent with that from migration_version under device node" ?
Quoted 9 lines
(It obviously cannot be a prereq for what I called (3) above.)
Quoted 7 lines
Quoted 4 lines
Does userspace need to check (1) or can it completely rely on (2), if it so chooses?
I think it can completely reply on (2) if compatibility check before mdev creation is not required.
Quoted 9 lines
Quoted 4 lines
Quoted 3 lines
If devices with a different mdev type are indeed compatible, it seems userspace can only find out after the devices have actually been created, as (1) does not apply?
yes, I think so.
How useful would it be for userspace to even look at (1) in that case? It only knows if things have a chance of working if it actually goes ahead and creates devices.
hmm, is it useful for userspace to test the migration_version under mdev type before it knows what mdev device to generate ?
like when the userspace wants to migrate an mdev device in src vm, but it has not created target vm and the target mdev device.
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
One of my worries is that the existence of an attribute with the same name in two similar locations might lead to confusion. But maybe it isn't a problem.
Quoted 8 lines
Quoted 3 lines
Yes, I have the same feeling. but as (2) is for sysfs interface consistency, to make it transparent to userspace tools like libvirt, I guess the same name is necessary?
What do we actually need here, I wonder? (1) and (2) seem to serve slightly different purposes, while (2) and what I called (3) have the same purpose. Is it important to userspace that (1) and (2) have the same name?
so change (1) to migration_type_version and (2) to migration_instance_version?
But as they are under different locations, could that location imply enough information?
Thanks
Yan
Quoted 36 lines · On Sun, 19 Apr 2020 21:24:57 -0400 Yan Zhao <[email protected]> wrote:
Quoted 35 lines · Cornelia Huck
Quoted 31 lines · On Fri, 17 Apr 2020 05:52:02 -0400 Yan Zhao <[email protected]> wrote:
Quoted 19 lines · Cornelia Huck
Quoted 6 lines · On Mon, 13 Apr 2020 01:52:01 -0400 Yan Zhao <[email protected]> wrote:
This patchset introduces a
migration_versionattribute under sysfs of VFIO Mediated devices.This
migration_versionattribute is used to check migration compatibility between two mdev devices.Quoted 9 lines
Currently, it has two locations:
(1) undermdev_typenode,
which can be used even before device creation, but only for mdev devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, but the src and target mdev devices are not necessarily be of the same mdev type
(The second location is newly added in v5, in order to keep consistent with themigration_versionnode for migratable pass-though devices)Quoted 2 lines
What is the relationship between those two attributes?
(1) is for mdev devices specifically, and (2) is provided to keep the same sysfs interface as with non-mdev cases. so (2) is for both mdev devices and non-mdev devices.
in future, if we enable vfio-pci vendor ops, (i.e. a non-mdev device is binding to vfio-pci, but is able to register migration region and do migration transactions from a vendor provided affiliate driver), the vendor driver would export (2) directly, under device node. It is not able to provide (1) as there're no mdev devices involved.
Quoted 8 lines
Quoted 4 lines
Ok, creating an alternate attribute for non-mdev devices makes sense. However, wouldn't that rather be a case (3)? The change here only refers to mdev devices.
as you pointed below, (3) and (2) serve the same purpose. and I think a possible usage is to migrate between a non-mdev device and an mdev device. so I think it's better for them both to use (2) rather than creating (3).
An mdev type is meant to define a software compatible interface, so in the case of mdev->mdev migration, doesn't migrating to a different type fail the most basic of compatibility tests that we expect userspace to perform? IOW, if two mdev types are migration compatible, it seems a prerequisite to that is that they provide the same software interface, which means they should be the same mdev type.
In the hybrid cases of mdev->phys or phys->mdev, how does a management tool begin to even guess what might be compatible? Are we expecting libvirt to probe ever device with this attribute in the system? Is there going to be a new class hierarchy created to enumerate all possible migrate-able devices?
I agree that there was a gap in the previous proposal for non-mdev devices, but I think this bring a lot of questions that we need to puzzle through and libvirt will need to re-evaluate how they might decide to pick a migration target device. For example, I'm sure libvirt would reject any policy decisions regarding picking a physical device versus an mdev device. Had we previously left it that only a layer above libvirt would select a target device and libvirt only tests compatibility to that target device?
We also need to consider that this expands the namespace. If we no longer require matching types as the first level of comparison, then vendor migration strings can theoretically collide. How do we coordinate that can't happen? Thanks,
Alex
Quoted 61 lines
Quoted 9 lines
Quoted 4 lines
Quoted 3 lines
Is existence (and compatibility) of (1) a pre-req for possible existence (and compatibility) of (2)?
no. (2) does not reply on (1).
Hm. Non-existence of (1) seems to imply "this type does not support migration". If an mdev created for such a type suddenly does support migration, it feels a bit odd.
yes. but I think if the condition happens, it should be reported a bug to vendor driver.
should I add a line in the doc like "vendor driver should ensure that the migration compatibility frommigration_versionundermdev_typeshould be consistent with that frommigration_versionunder device node" ?Quoted 9 lines
(It obviously cannot be a prereq for what I called (3) above.)
Quoted 7 lines
Quoted 4 lines
Does userspace need to check (1) or can it completely rely on (2), if it so chooses?
I think it can completely reply on (2) if compatibility check before mdev creation is not required.
Quoted 9 lines
Quoted 4 lines
Quoted 3 lines
If devices with a different mdev type are indeed compatible, it seems userspace can only find out after the devices have actually been created, as (1) does not apply?
yes, I think so.
How useful would it be for userspace to even look at (1) in that case? It only knows if things have a chance of working if it actually goes ahead and creates devices.
hmm, is it useful for userspace to test the
migration_versionunder mdev type before it knows what mdev device to generate ?
like when the userspace wants to migrate an mdev device in src vm, but it has not created target vm and the target mdev device.Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
One of my worries is that the existence of an attribute with the same name in two similar locations might lead to confusion. But maybe it isn't a problem.
Quoted 8 lines
Quoted 3 lines
Yes, I have the same feeling. but as (2) is for sysfs interface consistency, to make it transparent to userspace tools like libvirt, I guess the same name is necessary?
What do we actually need here, I wonder? (1) and (2) seem to serve slightly different purposes, while (2) and what I called (3) have the same purpose. Is it important to userspace that (1) and (2) have the same name?
so change (1) to
migration_type_versionand (2) tomigration_instance_version?
But as they are under different locations, could that location imply enough information?Thanks
Yan
Quoted 55 lines · Alex Williamson
Quoted 36 lines · On Sun, 19 Apr 2020 21:24:57 -0400 Yan Zhao <[email protected]> wrote:
Quoted 35 lines · Cornelia Huck
Quoted 31 lines · On Fri, 17 Apr 2020 05:52:02 -0400 Yan Zhao <[email protected]> wrote:
Quoted 19 lines · Cornelia Huck
Quoted 6 lines · On Mon, 13 Apr 2020 01:52:01 -0400 Yan Zhao <[email protected]> wrote:
This patchset introduces a
migration_versionattribute under sysfs of VFIO Mediated devices.This
migration_versionattribute is used to check migration compatibility between two mdev devices.Quoted 9 lines
Currently, it has two locations:
(1) undermdev_typenode,
which can be used even before device creation, but only for mdev devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, but the src and target mdev devices are not necessarily be of the same mdev type
(The second location is newly added in v5, in order to keep consistent with themigration_versionnode for migratable pass-though devices)Quoted 2 lines
What is the relationship between those two attributes?
(1) is for mdev devices specifically, and (2) is provided to keep the same sysfs interface as with non-mdev cases. so (2) is for both mdev devices and non-mdev devices.
in future, if we enable vfio-pci vendor ops, (i.e. a non-mdev device is binding to vfio-pci, but is able to register migration region and do migration transactions from a vendor provided affiliate driver), the vendor driver would export (2) directly, under device node. It is not able to provide (1) as there're no mdev devices involved.
Quoted 8 lines
Quoted 4 lines
Ok, creating an alternate attribute for non-mdev devices makes sense. However, wouldn't that rather be a case (3)? The change here only refers to mdev devices.
as you pointed below, (3) and (2) serve the same purpose. and I think a possible usage is to migrate between a non-mdev device and an mdev device. so I think it's better for them both to use (2) rather than creating (3).
An mdev type is meant to define a software compatible interface, so in the case of
mdev->mdevmigration, doesn't migrating to a different type fail the most basic of compatibility tests that we expect userspace to perform? IOW, if two mdev types are migration compatible, it seems a prerequisite to that is that they provide the same software interface, which means they should be the same mdev type.
Quoted 6 lines
In the hybrid cases of
mdev->physorphys->mdev, how does a management tool begin to even guess what might be compatible? Are we expecting libvirt to probe ever device with this attribute in the system? Is there going to be a new class hierarchy created to enumerate all possible migrate-able devices?
yes, management tool needs to guess and test migration compatible between two devices. But I think it's not the problem only for mdev->phys or phys->mdev. even for mdev->mdev, management tool needs to first assume that the two mdevs have the same type of parent devices (e.g.their pciids are equal). otherwise, it's still enumerating possibilities.
on the other hand, for two mdevs,
mdev1 from pdev1, its mdev_type is 1/2 of pdev1;
mdev2 from pdev2, its mdev_type is 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between mdev1 <-> mdev2.
Quoted 8 lines
I agree that there was a gap in the previous proposal for non-mdev devices, but I think this bring a lot of questions that we need to puzzle through and libvirt will need to re-evaluate how they might decide to pick a migration target device. For example, I'm sure libvirt would reject any policy decisions regarding picking a physical device versus an mdev device. Had we previously left it that only a layer above libvirt would select a target device and libvirt only tests compatibility to that target device?
I'm not sure if there's a layer above libvirt would select a target device. but if there is such a layer (even it's human), we need to provide an interface for them to know whether their decision is suitable for migration. The migration_version interface provides a potential to allow mdev->phys migration, even libvirt may currently reject it.
Quoted 4 lines
We also need to consider that this expands the namespace. If we no longer require matching types as the first level of comparison, then vendor migration strings can theoretically collide. How do we coordinate that can't happen? Thanks,
yes, it's indeed a problem.
could only allowing migration beteen devices from the same vendor be a good prerequisite?
Thanks
Yan
Quoted 63 lines
Quoted 62 lines
Quoted 10 lines
Quoted 5 lines
Quoted 4 lines
Is existence (and compatibility) of (1) a pre-req for possible existence (and compatibility) of (2)?
no. (2) does not reply on (1).
Hm. Non-existence of (1) seems to imply "this type does not support migration". If an mdev created for such a type suddenly does support migration, it feels a bit odd.
yes. but I think if the condition happens, it should be reported a bug to vendor driver.
should I add a line in the doc like "vendor driver should ensure that the migration compatibility frommigration_versionundermdev_typeshould be consistent with that frommigration_versionunder device node" ?Quoted 9 lines
(It obviously cannot be a prereq for what I called (3) above.)
Quoted 7 lines
Quoted 4 lines
Does userspace need to check (1) or can it completely rely on (2), if it so chooses?
I think it can completely reply on (2) if compatibility check before mdev creation is not required.
Quoted 9 lines
Quoted 4 lines
Quoted 3 lines
If devices with a different mdev type are indeed compatible, it seems userspace can only find out after the devices have actually been created, as (1) does not apply?
yes, I think so.
How useful would it be for userspace to even look at (1) in that case? It only knows if things have a chance of working if it actually goes ahead and creates devices.
hmm, is it useful for userspace to test the
migration_versionunder mdev type before it knows what mdev device to generate ?
like when the userspace wants to migrate an mdev device in src vm, but it has not created target vm and the target mdev device.Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
One of my worries is that the existence of an attribute with the same name in two similar locations might lead to confusion. But maybe it isn't a problem.
Quoted 8 lines
Quoted 3 lines
Yes, I have the same feeling. but as (2) is for sysfs interface consistency, to make it transparent to userspace tools like libvirt, I guess the same name is necessary?
What do we actually need here, I wonder? (1) and (2) seem to serve slightly different purposes, while (2) and what I called (3) have the same purpose. Is it important to userspace that (1) and (2) have the same name?
so change (1) to
migration_type_versionand (2) tomigration_instance_version?
But as they are under different locations, could that location imply enough information?Thanks
Yan
Quoted 83 lines
From: Yan Zhao
Sent: Tuesday, April 21, 2020 10:37 AMQuoted 4 lines · Alex Williamson
Quoted 1 line · On Sun, 19 Apr 2020 21:24:57 -0400 Yan Zhao <[email protected]> wrote:
On Fri, Apr 17, 2020 at 07:24:57PM +0800, Cornelia Huck wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · On Fri, 17 Apr 2020 05:52:02 -0400 Yan Zhao <[email protected]> wrote:
Quoted 4 lines · Cornelia Huck
Quoted 1 line · On Mon, 13 Apr 2020 01:52:01 -0400 Yan Zhao <[email protected]> wrote:
This patchset introduces a
migration_versionattribute under sysfsof VFIO
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Mediated devices.
This
migration_versionattribute is used to check migrationcompatibility
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
between two mdev devices.
Currently, it has two locations:
(1) undermdev_typenode,
which can be used even before device creation, but only formdev
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, butthe src
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
and target mdev devices are not necessarily be of the same
mdev type
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
(The second location is newly added in v5, in order to keep
consistent
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
with the
migration_versionnode for migratable pass-thoughdevices)
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
What is the relationship between those two attributes?
(1) is for mdev devices specifically, and (2) is provided to keep the
same
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
sysfs interface as with non-mdev cases. so (2) is for both mdev
devices and
Quoted 17 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
non-mdev devices.
in future, if we enable vfio-pci vendor ops, (i.e. a non-mdev device is binding to vfio-pci, but is able to register migration region and do migration transactions from a vendor provided affiliate driver), the vendor driver would export (2) directly, under device node. It is not able to provide (1) as there're no mdev devices involved.
Quoted 8 lines
Quoted 4 lines
Ok, creating an alternate attribute for non-mdev devices makes sense. However, wouldn't that rather be a case (3)? The change here only refers to mdev devices.
as you pointed below, (3) and (2) serve the same purpose. and I think a possible usage is to migrate between a non-mdev device and an mdev device. so I think it's better for them both to use (2) rather than creating (3).
Quoted 8 lines
An mdev type is meant to define a software compatible interface, so in the case of
mdev->mdevmigration, doesn't migrating to a different type fail the most basic of compatibility tests that we expect userspace to perform? IOW, if two mdev types are migration compatible, it seems a prerequisite to that is that they provide the same software interface, which means they should be the same mdev type.In the hybrid cases of
mdev->physorphys->mdev, how does amanagement
Quoted 5 lines
tool begin to even guess what might be compatible? Are we expecting libvirt to probe ever device with this attribute in the system? Is there going to be a new class hierarchy created to enumerate all possible migrate-able devices?
yes, management tool needs to guess and test migration compatible between two devices. But I think it's not the problem only for
mdev->physorphys->mdev. even formdev->mdev, management tool needs to
first assume that the two mdevs have the same type of parent devices (e.g.their pciids are equal). otherwise, it's still enumerating possibilities.
Quoted 5 lines
on the other hand, for two mdevs,
mdev1 from pdev1, itsmdev_typeis 1/2 of pdev1;
mdev2 from pdev2, itsmdev_typeis 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between mdev1 <-> mdev2.
How could the manage tool figure out that 1/2 of pdev1 is equivalent to 1/4 of pdev2? If we really want to allow such thing happen, the best choice is to report the same mdev type on both pdev1 and pdev2.
btw mdev<->phys just brings trouble to upper stack as Alex pointed out. Can we simplify the requirement by allowing only mdev<->mdev and phys<->phys migration? If an customer does want to migrate between a mdev and phys, he could wrap physical device into a wrapped mdev instance (with the same type as the source mdev) instead of using vendor ops. Doing so does add some burden but if mdev<->phys is not dominant usage then such tradeoff might be worthywhile...
Thanks
Kevin
Quoted 98 lines
Quoted 10 lines
I agree that there was a gap in the previous proposal for non-mdev devices, but I think this bring a lot of questions that we need to puzzle through and libvirt will need to re-evaluate how they might decide to pick a migration target device. For example, I'm sure libvirt would reject any policy decisions regarding picking a physical device versus an mdev device. Had we previously left it that only a layer above libvirt would select a target device and libvirt only tests compatibility to that target device?
I'm not sure if there's a layer above libvirt would select a target device. but if there is such a layer (even it's human), we need to provide an interface for them to know whether their decision is suitable for migration. The
migration_versioninterface provides a potential to allowmdev->physmigration, even libvirt may currently reject it.Quoted 4 lines
We also need to consider that this expands the namespace. If we no longer require matching types as the first level of comparison, then vendor migration strings can theoretically collide. How do we coordinate that can't happen? Thanks,
yes, it's indeed a problem.
could only allowing migration beteen devices from the same vendor be a good
prerequisite?Thanks
YanQuoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Quoted 4 lines
Is existence (and compatibility) of (1) a pre-req for possible existence (and compatibility) of (2)?
no. (2) does not reply on (1).
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Hm. Non-existence of (1) seems to imply "this type does not support migration". If an mdev created for such a type suddenly does support migration, it feels a bit odd.
yes. but I think if the condition happens, it should be reported a bug to vendor driver.
should I add a line in the doc like "vendor driver should ensure that the migration compatibility frommigration_versionundermdev_typeshouldbe
Quoted 5 lines
Quoted 5 lines
consistent with that from
migration_versionunder device node" ?Quoted 3 lines
(It obviously cannot be a prereq for what I called (3) above.)
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
Does userspace need to check (1) or can it completely rely on (2), if it so chooses?
I think it can completely reply on (2) if compatibility check before mdev creation is not required.
Quoted 1 line
If devices with a different mdev type are indeed compatible, it
seems
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
Quoted 2 lines
userspace can only find out after the devices have actually been created, as (1) does not apply?
yes, I think so.
How useful would it be for userspace to even look at (1) in that case? It only knows if things have a chance of working if it actually goes ahead and creates devices.
Quoted 7 lines
Quoted 7 lines
hmm, is it useful for userspace to test the
migration_versionunder mdev type before it knows what mdev device to generate ?
like when the userspace wants to migrate an mdev device in src vm, but it has not created target vm and the target mdev device.Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
One of my worries is that the existence of an attribute with the
same
Quoted 17 lines
Quoted 17 lines
Quoted 11 lines
Quoted 6 lines
Quoted 3 lines
name in two similar locations might lead to confusion. But maybe it isn't a problem.
Yes, I have the same feeling. but as (2) is for sysfs interface consistency, to make it transparent to userspace tools like libvirt, I guess the same name is necessary?
What do we actually need here, I wonder? (1) and (2) seem to serve slightly different purposes, while (2) and what I called (3) have the same purpose. Is it important to userspace that (1) and (2) have the same name?
so change (1) to
migration_type_versionand (2) tomigration_instance_version?
But as they are under different locations, could that location imply enough information?Quoted 5 lines
Quoted 4 lines
Thanks
Yan_______________________________________________
intel-gvt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gvt-dev
Quoted 89 lines · Kevin
Quoted 83 lines
From: Yan Zhao
Sent: Tuesday, April 21, 2020 10:37 AMQuoted 4 lines · Alex Williamson
Quoted 1 line · On Sun, 19 Apr 2020 21:24:57 -0400 Yan Zhao <[email protected]> wrote:
On Fri, Apr 17, 2020 at 07:24:57PM +0800, Cornelia Huck wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · On Fri, 17 Apr 2020 05:52:02 -0400 Yan Zhao <[email protected]> wrote:
Quoted 4 lines · Cornelia Huck
Quoted 1 line · On Mon, 13 Apr 2020 01:52:01 -0400 Yan Zhao <[email protected]> wrote:
This patchset introduces a
migration_versionattribute under sysfsof VFIO
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Mediated devices.
This
migration_versionattribute is used to check migrationcompatibility
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
between two mdev devices.
Currently, it has two locations:
(1) undermdev_typenode,
which can be used even before device creation, but only formdev
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, butthe src
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
and target mdev devices are not necessarily be of the same
mdev type
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
(The second location is newly added in v5, in order to keep
consistent
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
with the
migration_versionnode for migratable pass-thoughdevices)
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
What is the relationship between those two attributes?
(1) is for mdev devices specifically, and (2) is provided to keep the
same
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
sysfs interface as with non-mdev cases. so (2) is for both mdev
devices and
Quoted 17 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
non-mdev devices.
in future, if we enable vfio-pci vendor ops, (i.e. a non-mdev device is binding to vfio-pci, but is able to register migration region and do migration transactions from a vendor provided affiliate driver), the vendor driver would export (2) directly, under device node. It is not able to provide (1) as there're no mdev devices involved.
Quoted 8 lines
Quoted 4 lines
Ok, creating an alternate attribute for non-mdev devices makes sense. However, wouldn't that rather be a case (3)? The change here only refers to mdev devices.
as you pointed below, (3) and (2) serve the same purpose. and I think a possible usage is to migrate between a non-mdev device and an mdev device. so I think it's better for them both to use (2) rather than creating (3).
Quoted 8 lines
An mdev type is meant to define a software compatible interface, so in the case of
mdev->mdevmigration, doesn't migrating to a different type fail the most basic of compatibility tests that we expect userspace to perform? IOW, if two mdev types are migration compatible, it seems a prerequisite to that is that they provide the same software interface, which means they should be the same mdev type.In the hybrid cases of
mdev->physorphys->mdev, how does amanagement
Quoted 5 lines
tool begin to even guess what might be compatible? Are we expecting libvirt to probe ever device with this attribute in the system? Is there going to be a new class hierarchy created to enumerate all possible migrate-able devices?
yes, management tool needs to guess and test migration compatible between two devices. But I think it's not the problem only for
mdev->physorphys->mdev. even formdev->mdev, management tool needs to
first assume that the two mdevs have the same type of parent devices (e.g.their pciids are equal). otherwise, it's still enumerating possibilities.Quoted 5 lines
on the other hand, for two mdevs,
mdev1 from pdev1, itsmdev_typeis 1/2 of pdev1;
mdev2 from pdev2, itsmdev_typeis 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between mdev1 <-> mdev2.
Quoted 3 lines
How could the manage tool figure out that 1/2 of pdev1 is equivalent to 1/4 of pdev2? If we really want to allow such thing happen, the best choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this migration_version interface. the management tool can take advantage of this interface to know if two devices are migration compatible, no matter they are mdevs, non-mdevs, or mix.
as I know, (please correct me if not right), current libvirt still requires manually generating mdev devices, and it just duplicates src vm configuration to the target vm.
for libvirt, currently it's always phys->phys and mdev->mdev (and of the same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise, why do we need to introduce this migration_version interface and leave the judgement of migration compatibility to vendor driver? why not simply set the criteria to something like "pciids of parent devices are equal, and mdev types are equal" ?
Quoted 1 line
btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?
I think it just needs to read src migration_version under src dev node, and test it in target migration version under target dev node.
after all, through this interface we just help the upper layer knowing available options through reading and testing, and they decide to use it or not.
Quoted 7 lines
Can we simplify the requirement by allowing only mdev<->mdev and phys<->phys migration? If an customer does want to migrate between a mdev and phys, he could wrap physical device into a wrapped mdev instance (with the same type as the source mdev) instead of using vendor ops. Doing so does add some burden but if mdev<->phys is not dominant usage then such tradeoff might be worthywhile...
If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's easy for vendor driver to tell if a phys device is migration compatible to a mdev device according it supports it or not.
Thanks
Yan
Quoted 99 lines
Quoted 99 lines
Quoted 11 lines
I agree that there was a gap in the previous proposal for non-mdev devices, but I think this bring a lot of questions that we need to puzzle through and libvirt will need to re-evaluate how they might decide to pick a migration target device. For example, I'm sure libvirt would reject any policy decisions regarding picking a physical device versus an mdev device. Had we previously left it that only a layer above libvirt would select a target device and libvirt only tests compatibility to that target device?
I'm not sure if there's a layer above libvirt would select a target device. but if there is such a layer (even it's human), we need to provide an interface for them to know whether their decision is suitable for migration. The
migration_versioninterface provides a potential to allowmdev->physmigration, even libvirt may currently reject it.Quoted 4 lines
We also need to consider that this expands the namespace. If we no longer require matching types as the first level of comparison, then vendor migration strings can theoretically collide. How do we coordinate that can't happen? Thanks,
yes, it's indeed a problem.
could only allowing migration beteen devices from the same vendor be a good
prerequisite?Thanks
YanQuoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Quoted 4 lines
Is existence (and compatibility) of (1) a pre-req for possible existence (and compatibility) of (2)?
no. (2) does not reply on (1).
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Hm. Non-existence of (1) seems to imply "this type does not support migration". If an mdev created for such a type suddenly does support migration, it feels a bit odd.
yes. but I think if the condition happens, it should be reported a bug to vendor driver.
should I add a line in the doc like "vendor driver should ensure that the migration compatibility frommigration_versionundermdev_typeshouldbe
Quoted 5 lines
Quoted 5 lines
consistent with that from
migration_versionunder device node" ?Quoted 3 lines
(It obviously cannot be a prereq for what I called (3) above.)
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
Does userspace need to check (1) or can it completely rely on (2), if it so chooses?
I think it can completely reply on (2) if compatibility check before mdev creation is not required.
Quoted 1 line
If devices with a different mdev type are indeed compatible, it
seems
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
Quoted 2 lines
userspace can only find out after the devices have actually been created, as (1) does not apply?
yes, I think so.
How useful would it be for userspace to even look at (1) in that case? It only knows if things have a chance of working if it actually goes ahead and creates devices.
Quoted 7 lines
Quoted 7 lines
hmm, is it useful for userspace to test the
migration_versionunder mdev type before it knows what mdev device to generate ?
like when the userspace wants to migrate an mdev device in src vm, but it has not created target vm and the target mdev device.Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
One of my worries is that the existence of an attribute with the
same
Quoted 17 lines
Quoted 17 lines
Quoted 11 lines
Quoted 6 lines
Quoted 3 lines
name in two similar locations might lead to confusion. But maybe it isn't a problem.
Yes, I have the same feeling. but as (2) is for sysfs interface consistency, to make it transparent to userspace tools like libvirt, I guess the same name is necessary?
What do we actually need here, I wonder? (1) and (2) seem to serve slightly different purposes, while (2) and what I called (3) have the same purpose. Is it important to userspace that (1) and (2) have the same name?
so change (1) to
migration_type_versionand (2) tomigration_instance_version?
But as they are under different locations, could that location imply enough information?Quoted 5 lines
Quoted 4 lines
Thanks
Yan_______________________________________________
intel-gvt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gvt-dev
Quoted 127 lines · * Yan Zhao ([email protected]) wrote:
Quoted 89 lines · Kevin
Quoted 83 lines
From: Yan Zhao
Sent: Tuesday, April 21, 2020 10:37 AMQuoted 4 lines · Alex Williamson
Quoted 1 line · On Sun, 19 Apr 2020 21:24:57 -0400 Yan Zhao <[email protected]> wrote:
On Fri, Apr 17, 2020 at 07:24:57PM +0800, Cornelia Huck wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · On Fri, 17 Apr 2020 05:52:02 -0400 Yan Zhao <[email protected]> wrote:
Quoted 4 lines · Cornelia Huck
Quoted 1 line · On Mon, 13 Apr 2020 01:52:01 -0400 Yan Zhao <[email protected]> wrote:
This patchset introduces a
migration_versionattribute under sysfsof VFIO
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Mediated devices.
This
migration_versionattribute is used to check migrationcompatibility
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
between two mdev devices.
Currently, it has two locations:
(1) undermdev_typenode,
which can be used even before device creation, but only formdev
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, butthe src
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
and target mdev devices are not necessarily be of the same
mdev type
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
(The second location is newly added in v5, in order to keep
consistent
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
with the
migration_versionnode for migratable pass-thoughdevices)
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
What is the relationship between those two attributes?
(1) is for mdev devices specifically, and (2) is provided to keep the
same
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
sysfs interface as with non-mdev cases. so (2) is for both mdev
devices and
Quoted 17 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
non-mdev devices.
in future, if we enable vfio-pci vendor ops, (i.e. a non-mdev device is binding to vfio-pci, but is able to register migration region and do migration transactions from a vendor provided affiliate driver), the vendor driver would export (2) directly, under device node. It is not able to provide (1) as there're no mdev devices involved.
Quoted 8 lines
Quoted 4 lines
Ok, creating an alternate attribute for non-mdev devices makes sense. However, wouldn't that rather be a case (3)? The change here only refers to mdev devices.
as you pointed below, (3) and (2) serve the same purpose. and I think a possible usage is to migrate between a non-mdev device and an mdev device. so I think it's better for them both to use (2) rather than creating (3).
Quoted 8 lines
An mdev type is meant to define a software compatible interface, so in the case of
mdev->mdevmigration, doesn't migrating to a different type fail the most basic of compatibility tests that we expect userspace to perform? IOW, if two mdev types are migration compatible, it seems a prerequisite to that is that they provide the same software interface, which means they should be the same mdev type.In the hybrid cases of
mdev->physorphys->mdev, how does amanagement
Quoted 5 lines
tool begin to even guess what might be compatible? Are we expecting libvirt to probe ever device with this attribute in the system? Is there going to be a new class hierarchy created to enumerate all possible migrate-able devices?
yes, management tool needs to guess and test migration compatible between two devices. But I think it's not the problem only for
mdev->physorphys->mdev. even formdev->mdev, management tool needs to
first assume that the two mdevs have the same type of parent devices (e.g.their pciids are equal). otherwise, it's still enumerating possibilities.Quoted 5 lines
on the other hand, for two mdevs,
mdev1 from pdev1, itsmdev_typeis 1/2 of pdev1;
mdev2 from pdev2, itsmdev_typeis 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between mdev1 <-> mdev2.Quoted 3 lines
How could the manage tool figure out that 1/2 of pdev1 is equivalent to 1/4 of pdev2? If we really want to allow such thing happen, the best choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this
migration_versioninterface. the management tool can take advantage of this interface to know if two devices are migration compatible, no matter they are mdevs, non-mdevs, or mix.as I know, (please correct me if not right), current libvirt still requires manually generating mdev devices, and it just duplicates src vm configuration to the target vm.
for libvirt, currently it's alwaysphys->physandmdev->mdev(and of the same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise, why do we need to introduce thismigration_versioninterface and leave the judgement of migration compatibility to vendor driver? why not simply set the criteria to something like "pciids of parent devices are equal, and mdev types are equal" ?Quoted 1 line
btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?
I think it just needs to read src
migration_versionunder src dev node, and test it in target migration version under target dev node.after all, through this interface we just help the upper layer knowing available options through reading and testing, and they decide to use it or not.
Quoted 7 lines
Can we simplify the requirement by allowing only mdev<->mdev and phys<->phys migration? If an customer does want to migrate between a mdev and phys, he could wrap physical device into a wrapped mdev instance (with the same type as the source mdev) instead of using vendor ops. Doing so does add some burden but if mdev<->phys is not dominant usage then such tradeoff might be worthywhile...
Quoted 9 lines
If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's easy for vendor driver to tell if a phys device is migration compatible to a mdev device according it supports it or not.
It surprises me that the PCIID matching is a requirement; I'd assumed with this clever mdev name setup that you could migrate between two different models in a series, or to a newer model, as long as they both supported the same mdev view.
Dave
Quoted 103 lines
Thanks
YanQuoted 99 lines
Quoted 99 lines
Quoted 11 lines
I agree that there was a gap in the previous proposal for non-mdev devices, but I think this bring a lot of questions that we need to puzzle through and libvirt will need to re-evaluate how they might decide to pick a migration target device. For example, I'm sure libvirt would reject any policy decisions regarding picking a physical device versus an mdev device. Had we previously left it that only a layer above libvirt would select a target device and libvirt only tests compatibility to that target device?
I'm not sure if there's a layer above libvirt would select a target device. but if there is such a layer (even it's human), we need to provide an interface for them to know whether their decision is suitable for migration. The
migration_versioninterface provides a potential to allowmdev->physmigration, even libvirt may currently reject it.Quoted 4 lines
We also need to consider that this expands the namespace. If we no longer require matching types as the first level of comparison, then vendor migration strings can theoretically collide. How do we coordinate that can't happen? Thanks,
yes, it's indeed a problem.
could only allowing migration beteen devices from the same vendor be a good
prerequisite?Thanks
YanQuoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Quoted 4 lines
Is existence (and compatibility) of (1) a pre-req for possible existence (and compatibility) of (2)?
no. (2) does not reply on (1).
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Hm. Non-existence of (1) seems to imply "this type does not support migration". If an mdev created for such a type suddenly does support migration, it feels a bit odd.
yes. but I think if the condition happens, it should be reported a bug to vendor driver.
should I add a line in the doc like "vendor driver should ensure that the migration compatibility frommigration_versionundermdev_typeshouldbe
Quoted 5 lines
Quoted 5 lines
consistent with that from
migration_versionunder device node" ?Quoted 3 lines
(It obviously cannot be a prereq for what I called (3) above.)
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
Does userspace need to check (1) or can it completely rely on (2), if it so chooses?
I think it can completely reply on (2) if compatibility check before mdev creation is not required.
Quoted 1 line
If devices with a different mdev type are indeed compatible, it
seems
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
Quoted 2 lines
userspace can only find out after the devices have actually been created, as (1) does not apply?
yes, I think so.
How useful would it be for userspace to even look at (1) in that case? It only knows if things have a chance of working if it actually goes ahead and creates devices.
Quoted 7 lines
Quoted 7 lines
hmm, is it useful for userspace to test the
migration_versionunder mdev type before it knows what mdev device to generate ?
like when the userspace wants to migrate an mdev device in src vm, but it has not created target vm and the target mdev device.Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
One of my worries is that the existence of an attribute with the
same
Quoted 17 lines
Quoted 17 lines
Quoted 11 lines
Quoted 6 lines
Quoted 3 lines
name in two similar locations might lead to confusion. But maybe it isn't a problem.
Yes, I have the same feeling. but as (2) is for sysfs interface consistency, to make it transparent to userspace tools like libvirt, I guess the same name is necessary?
What do we actually need here, I wonder? (1) and (2) seem to serve slightly different purposes, while (2) and what I called (3) have the same purpose. Is it important to userspace that (1) and (2) have the same name?
so change (1) to
migration_type_versionand (2) tomigration_instance_version?
But as they are under different locations, could that location imply enough information?Quoted 5 lines
Quoted 4 lines
Thanks
Yan_______________________________________________
intel-gvt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gvt-dev
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 138 lines · Dr. David Alan Gilbert
Quoted 127 lines · * Yan Zhao ([email protected]) wrote:
Quoted 89 lines · Kevin
Quoted 83 lines
From: Yan Zhao
Sent: Tuesday, April 21, 2020 10:37 AMQuoted 4 lines · Alex Williamson
Quoted 1 line · On Sun, 19 Apr 2020 21:24:57 -0400 Yan Zhao <[email protected]> wrote:
On Fri, Apr 17, 2020 at 07:24:57PM +0800, Cornelia Huck wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · On Fri, 17 Apr 2020 05:52:02 -0400 Yan Zhao <[email protected]> wrote:
Quoted 4 lines · Cornelia Huck
Quoted 1 line · On Mon, 13 Apr 2020 01:52:01 -0400 Yan Zhao <[email protected]> wrote:
This patchset introduces a
migration_versionattribute under sysfsof VFIO
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Mediated devices.
This
migration_versionattribute is used to check migrationcompatibility
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
between two mdev devices.
Currently, it has two locations:
(1) undermdev_typenode,
which can be used even before device creation, but only formdev
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, butthe src
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
and target mdev devices are not necessarily be of the same
mdev type
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
(The second location is newly added in v5, in order to keep
consistent
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
with the
migration_versionnode for migratable pass-thoughdevices)
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
What is the relationship between those two attributes?
(1) is for mdev devices specifically, and (2) is provided to keep the
same
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
sysfs interface as with non-mdev cases. so (2) is for both mdev
devices and
Quoted 17 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
non-mdev devices.
in future, if we enable vfio-pci vendor ops, (i.e. a non-mdev device is binding to vfio-pci, but is able to register migration region and do migration transactions from a vendor provided affiliate driver), the vendor driver would export (2) directly, under device node. It is not able to provide (1) as there're no mdev devices involved.
Quoted 8 lines
Quoted 4 lines
Ok, creating an alternate attribute for non-mdev devices makes sense. However, wouldn't that rather be a case (3)? The change here only refers to mdev devices.
as you pointed below, (3) and (2) serve the same purpose. and I think a possible usage is to migrate between a non-mdev device and an mdev device. so I think it's better for them both to use (2) rather than creating (3).
Quoted 8 lines
An mdev type is meant to define a software compatible interface, so in the case of
mdev->mdevmigration, doesn't migrating to a different type fail the most basic of compatibility tests that we expect userspace to perform? IOW, if two mdev types are migration compatible, it seems a prerequisite to that is that they provide the same software interface, which means they should be the same mdev type.In the hybrid cases of
mdev->physorphys->mdev, how does amanagement
Quoted 5 lines
tool begin to even guess what might be compatible? Are we expecting libvirt to probe ever device with this attribute in the system? Is there going to be a new class hierarchy created to enumerate all possible migrate-able devices?
yes, management tool needs to guess and test migration compatible between two devices. But I think it's not the problem only for
mdev->physorphys->mdev. even formdev->mdev, management tool needs to
first assume that the two mdevs have the same type of parent devices (e.g.their pciids are equal). otherwise, it's still enumerating possibilities.Quoted 5 lines
on the other hand, for two mdevs,
mdev1 from pdev1, itsmdev_typeis 1/2 of pdev1;
mdev2 from pdev2, itsmdev_typeis 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between mdev1 <-> mdev2.Quoted 3 lines
How could the manage tool figure out that 1/2 of pdev1 is equivalent to 1/4 of pdev2? If we really want to allow such thing happen, the best choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this
migration_versioninterface. the management tool can take advantage of this interface to know if two devices are migration compatible, no matter they are mdevs, non-mdevs, or mix.as I know, (please correct me if not right), current libvirt still requires manually generating mdev devices, and it just duplicates src vm configuration to the target vm.
for libvirt, currently it's alwaysphys->physandmdev->mdev(and of the same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise, why do we need to introduce thismigration_versioninterface and leave the judgement of migration compatibility to vendor driver? why not simply set the criteria to something like "pciids of parent devices are equal, and mdev types are equal" ?Quoted 1 line
btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?
I think it just needs to read src
migration_versionunder src dev node, and test it in target migration version under target dev node.after all, through this interface we just help the upper layer knowing available options through reading and testing, and they decide to use it or not.
Quoted 7 lines
Can we simplify the requirement by allowing only mdev<->mdev and phys<->phys migration? If an customer does want to migrate between a mdev and phys, he could wrap physical device into a wrapped mdev instance (with the same type as the source mdev) instead of using vendor ops. Doing so does add some burden but if mdev<->phys is not dominant usage then such tradeoff might be worthywhile...
Quoted 9 lines
If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's easy for vendor driver to tell if a phys device is migration compatible to a mdev device according it supports it or not.
Quoted 5 lines
It surprises me that the PCIID matching is a requirement; I'd assumed with this clever mdev name setup that you could migrate between two different models in a series, or to a newer model, as long as they both supported the same mdev view.
hi Dave
the migration_version string is transparent to userspace, and is completely defined by vendor driver.
I put it there just as an example of how vendor driver may implement it. e.g.
the src migration_version string is "src PCIID + src software version", then when this string is write to target migration_version node, the vendor driver in the target device will compare it with its own device info and software version.
If different models are allowed, the write just succeeds even PCIIDs in src and target are different.
so, it is the vendor driver to define whether two devices are able to migrate, no matter their PCIIDs, mdev types, software versions..., which provides vendor driver full flexibility.
do you think it's good?
Thanks
Yan
Quoted 107 lines
Quoted 104 lines
Thanks
YanQuoted 99 lines
Quoted 99 lines
Quoted 11 lines
I agree that there was a gap in the previous proposal for non-mdev devices, but I think this bring a lot of questions that we need to puzzle through and libvirt will need to re-evaluate how they might decide to pick a migration target device. For example, I'm sure libvirt would reject any policy decisions regarding picking a physical device versus an mdev device. Had we previously left it that only a layer above libvirt would select a target device and libvirt only tests compatibility to that target device?
I'm not sure if there's a layer above libvirt would select a target device. but if there is such a layer (even it's human), we need to provide an interface for them to know whether their decision is suitable for migration. The
migration_versioninterface provides a potential to allowmdev->physmigration, even libvirt may currently reject it.Quoted 4 lines
We also need to consider that this expands the namespace. If we no longer require matching types as the first level of comparison, then vendor migration strings can theoretically collide. How do we coordinate that can't happen? Thanks,
yes, it's indeed a problem.
could only allowing migration beteen devices from the same vendor be a good
prerequisite?Thanks
YanQuoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Quoted 4 lines
Is existence (and compatibility) of (1) a pre-req for possible existence (and compatibility) of (2)?
no. (2) does not reply on (1).
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Hm. Non-existence of (1) seems to imply "this type does not support migration". If an mdev created for such a type suddenly does support migration, it feels a bit odd.
yes. but I think if the condition happens, it should be reported a bug to vendor driver.
should I add a line in the doc like "vendor driver should ensure that the migration compatibility frommigration_versionundermdev_typeshouldbe
Quoted 5 lines
Quoted 5 lines
consistent with that from
migration_versionunder device node" ?Quoted 3 lines
(It obviously cannot be a prereq for what I called (3) above.)
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
Does userspace need to check (1) or can it completely rely on (2), if it so chooses?
I think it can completely reply on (2) if compatibility check before mdev creation is not required.
Quoted 1 line
If devices with a different mdev type are indeed compatible, it
seems
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
Quoted 2 lines
userspace can only find out after the devices have actually been created, as (1) does not apply?
yes, I think so.
How useful would it be for userspace to even look at (1) in that case? It only knows if things have a chance of working if it actually goes ahead and creates devices.
Quoted 7 lines
Quoted 7 lines
hmm, is it useful for userspace to test the
migration_versionunder mdev type before it knows what mdev device to generate ?
like when the userspace wants to migrate an mdev device in src vm, but it has not created target vm and the target mdev device.Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
One of my worries is that the existence of an attribute with the
same
Quoted 17 lines
Quoted 17 lines
Quoted 11 lines
Quoted 6 lines
Quoted 3 lines
name in two similar locations might lead to confusion. But maybe it isn't a problem.
Yes, I have the same feeling. but as (2) is for sysfs interface consistency, to make it transparent to userspace tools like libvirt, I guess the same name is necessary?
What do we actually need here, I wonder? (1) and (2) seem to serve slightly different purposes, while (2) and what I called (3) have the same purpose. Is it important to userspace that (1) and (2) have the same name?
so change (1) to
migration_type_versionand (2) tomigration_instance_version?
But as they are under different locations, could that location imply enough information?Quoted 5 lines
Quoted 4 lines
Thanks
Yan_______________________________________________
intel-gvt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gvt-dev--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 156 lines · * Yan Zhao ([email protected]) wrote:
Quoted 138 lines · Dr. David Alan Gilbert
Quoted 127 lines · * Yan Zhao ([email protected]) wrote:
Quoted 89 lines · Kevin
Quoted 83 lines
From: Yan Zhao
Sent: Tuesday, April 21, 2020 10:37 AMQuoted 4 lines · Alex Williamson
Quoted 1 line · On Sun, 19 Apr 2020 21:24:57 -0400 Yan Zhao <[email protected]> wrote:
On Fri, Apr 17, 2020 at 07:24:57PM +0800, Cornelia Huck wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · On Fri, 17 Apr 2020 05:52:02 -0400 Yan Zhao <[email protected]> wrote:
Quoted 4 lines · Cornelia Huck
Quoted 1 line · On Mon, 13 Apr 2020 01:52:01 -0400 Yan Zhao <[email protected]> wrote:
This patchset introduces a
migration_versionattribute under sysfsof VFIO
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Mediated devices.
This
migration_versionattribute is used to check migrationcompatibility
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
between two mdev devices.
Currently, it has two locations:
(1) undermdev_typenode,
which can be used even before device creation, but only formdev
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, butthe src
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
and target mdev devices are not necessarily be of the same
mdev type
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
(The second location is newly added in v5, in order to keep
consistent
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
with the
migration_versionnode for migratable pass-thoughdevices)
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
What is the relationship between those two attributes?
(1) is for mdev devices specifically, and (2) is provided to keep the
same
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
sysfs interface as with non-mdev cases. so (2) is for both mdev
devices and
Quoted 17 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
non-mdev devices.
in future, if we enable vfio-pci vendor ops, (i.e. a non-mdev device is binding to vfio-pci, but is able to register migration region and do migration transactions from a vendor provided affiliate driver), the vendor driver would export (2) directly, under device node. It is not able to provide (1) as there're no mdev devices involved.
Quoted 8 lines
Quoted 4 lines
Ok, creating an alternate attribute for non-mdev devices makes sense. However, wouldn't that rather be a case (3)? The change here only refers to mdev devices.
as you pointed below, (3) and (2) serve the same purpose. and I think a possible usage is to migrate between a non-mdev device and an mdev device. so I think it's better for them both to use (2) rather than creating (3).
Quoted 8 lines
An mdev type is meant to define a software compatible interface, so in the case of
mdev->mdevmigration, doesn't migrating to a different type fail the most basic of compatibility tests that we expect userspace to perform? IOW, if two mdev types are migration compatible, it seems a prerequisite to that is that they provide the same software interface, which means they should be the same mdev type.In the hybrid cases of
mdev->physorphys->mdev, how does amanagement
Quoted 5 lines
tool begin to even guess what might be compatible? Are we expecting libvirt to probe ever device with this attribute in the system? Is there going to be a new class hierarchy created to enumerate all possible migrate-able devices?
yes, management tool needs to guess and test migration compatible between two devices. But I think it's not the problem only for
mdev->physorphys->mdev. even formdev->mdev, management tool needs to
first assume that the two mdevs have the same type of parent devices (e.g.their pciids are equal). otherwise, it's still enumerating possibilities.Quoted 5 lines
on the other hand, for two mdevs,
mdev1 from pdev1, itsmdev_typeis 1/2 of pdev1;
mdev2 from pdev2, itsmdev_typeis 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between mdev1 <-> mdev2.Quoted 3 lines
How could the manage tool figure out that 1/2 of pdev1 is equivalent to 1/4 of pdev2? If we really want to allow such thing happen, the best choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this
migration_versioninterface. the management tool can take advantage of this interface to know if two devices are migration compatible, no matter they are mdevs, non-mdevs, or mix.as I know, (please correct me if not right), current libvirt still requires manually generating mdev devices, and it just duplicates src vm configuration to the target vm.
for libvirt, currently it's alwaysphys->physandmdev->mdev(and of the same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise, why do we need to introduce thismigration_versioninterface and leave the judgement of migration compatibility to vendor driver? why not simply set the criteria to something like "pciids of parent devices are equal, and mdev types are equal" ?Quoted 1 line
btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?
I think it just needs to read src
migration_versionunder src dev node, and test it in target migration version under target dev node.after all, through this interface we just help the upper layer knowing available options through reading and testing, and they decide to use it or not.
Quoted 7 lines
Can we simplify the requirement by allowing only mdev<->mdev and phys<->phys migration? If an customer does want to migrate between a mdev and phys, he could wrap physical device into a wrapped mdev instance (with the same type as the source mdev) instead of using vendor ops. Doing so does add some burden but if mdev<->phys is not dominant usage then such tradeoff might be worthywhile...
Quoted 9 lines
If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's easy for vendor driver to tell if a phys device is migration compatible to a mdev device according it supports it or not.Quoted 5 lines
It surprises me that the PCIID matching is a requirement; I'd assumed with this clever mdev name setup that you could migrate between two different models in a series, or to a newer model, as long as they both supported the same mdev view.
hi Dave
themigration_versionstring is transparent to userspace, and is completely defined by vendor driver.
I put it there just as an example of how vendor driver may implement it. e.g.
the srcmigration_versionstring is "src PCIID + src software version", then when this string is write to targetmigration_versionnode, the vendor driver in the target device will compare it with its own device info and software version.
If different models are allowed, the write just succeeds even PCIIDs in src and target are different.
Quoted 5 lines
so, it is the vendor driver to define whether two devices are able to migrate, no matter their PCIIDs, mdev types, software versions..., which provides vendor driver full flexibility.
do you think it's good?
Yeh that's OK; I guess it's going to need to have a big table in their with all the PCIIDs in.
The alternative would be to abstract it a little; e.g. to say it's an Intel-gpu-core-v4 and then it would be less worried about the exact clock speed etc - but yes you might be right htat PCIIDs might be best for checking for quirks.
Dave
Quoted 111 lines
Thanks
YanQuoted 107 lines
Quoted 104 lines
Thanks
YanQuoted 99 lines
Quoted 99 lines
Quoted 11 lines
I agree that there was a gap in the previous proposal for non-mdev devices, but I think this bring a lot of questions that we need to puzzle through and libvirt will need to re-evaluate how they might decide to pick a migration target device. For example, I'm sure libvirt would reject any policy decisions regarding picking a physical device versus an mdev device. Had we previously left it that only a layer above libvirt would select a target device and libvirt only tests compatibility to that target device?
I'm not sure if there's a layer above libvirt would select a target device. but if there is such a layer (even it's human), we need to provide an interface for them to know whether their decision is suitable for migration. The
migration_versioninterface provides a potential to allowmdev->physmigration, even libvirt may currently reject it.Quoted 4 lines
We also need to consider that this expands the namespace. If we no longer require matching types as the first level of comparison, then vendor migration strings can theoretically collide. How do we coordinate that can't happen? Thanks,
yes, it's indeed a problem.
could only allowing migration beteen devices from the same vendor be a good
prerequisite?Thanks
YanQuoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Quoted 4 lines
Is existence (and compatibility) of (1) a pre-req for possible existence (and compatibility) of (2)?
no. (2) does not reply on (1).
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Hm. Non-existence of (1) seems to imply "this type does not support migration". If an mdev created for such a type suddenly does support migration, it feels a bit odd.
yes. but I think if the condition happens, it should be reported a bug to vendor driver.
should I add a line in the doc like "vendor driver should ensure that the migration compatibility frommigration_versionundermdev_typeshouldbe
Quoted 5 lines
Quoted 5 lines
consistent with that from
migration_versionunder device node" ?Quoted 3 lines
(It obviously cannot be a prereq for what I called (3) above.)
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
Does userspace need to check (1) or can it completely rely on (2), if it so chooses?
I think it can completely reply on (2) if compatibility check before mdev creation is not required.
Quoted 1 line
If devices with a different mdev type are indeed compatible, it
seems
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
Quoted 2 lines
userspace can only find out after the devices have actually been created, as (1) does not apply?
yes, I think so.
How useful would it be for userspace to even look at (1) in that case? It only knows if things have a chance of working if it actually goes ahead and creates devices.
Quoted 7 lines
Quoted 7 lines
hmm, is it useful for userspace to test the
migration_versionunder mdev type before it knows what mdev device to generate ?
like when the userspace wants to migrate an mdev device in src vm, but it has not created target vm and the target mdev device.Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
One of my worries is that the existence of an attribute with the
same
Quoted 17 lines
Quoted 17 lines
Quoted 11 lines
Quoted 6 lines
Quoted 3 lines
name in two similar locations might lead to confusion. But maybe it isn't a problem.
Yes, I have the same feeling. but as (2) is for sysfs interface consistency, to make it transparent to userspace tools like libvirt, I guess the same name is necessary?
What do we actually need here, I wonder? (1) and (2) seem to serve slightly different purposes, while (2) and what I called (3) have the same purpose. Is it important to userspace that (1) and (2) have the same name?
so change (1) to
migration_type_versionand (2) tomigration_instance_version?
But as they are under different locations, could that location imply enough information?Quoted 5 lines
Quoted 4 lines
Thanks
Yan_______________________________________________
intel-gvt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gvt-dev--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 161 lines · Dr. David Alan Gilbert
Quoted 160 lines · * Yan Zhao ([email protected]) wrote:
Quoted 138 lines · Dr. David Alan Gilbert
Quoted 127 lines · * Yan Zhao ([email protected]) wrote:
Quoted 89 lines · Kevin
Quoted 83 lines
From: Yan Zhao
Sent: Tuesday, April 21, 2020 10:37 AMQuoted 4 lines · Alex Williamson
Quoted 1 line · On Sun, 19 Apr 2020 21:24:57 -0400 Yan Zhao <[email protected]> wrote:
On Fri, Apr 17, 2020 at 07:24:57PM +0800, Cornelia Huck wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · On Fri, 17 Apr 2020 05:52:02 -0400 Yan Zhao <[email protected]> wrote:
Quoted 4 lines · Cornelia Huck
Quoted 1 line · On Mon, 13 Apr 2020 01:52:01 -0400 Yan Zhao <[email protected]> wrote:
This patchset introduces a
migration_versionattribute under sysfsof VFIO
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Mediated devices.
This
migration_versionattribute is used to check migrationcompatibility
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
between two mdev devices.
Currently, it has two locations:
(1) undermdev_typenode,
which can be used even before device creation, but only formdev
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, butthe src
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
and target mdev devices are not necessarily be of the same
mdev type
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
(The second location is newly added in v5, in order to keep
consistent
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
with the
migration_versionnode for migratable pass-thoughdevices)
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
What is the relationship between those two attributes?
(1) is for mdev devices specifically, and (2) is provided to keep the
same
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
sysfs interface as with non-mdev cases. so (2) is for both mdev
devices and
Quoted 17 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
non-mdev devices.
in future, if we enable vfio-pci vendor ops, (i.e. a non-mdev device is binding to vfio-pci, but is able to register migration region and do migration transactions from a vendor provided affiliate driver), the vendor driver would export (2) directly, under device node. It is not able to provide (1) as there're no mdev devices involved.
Quoted 8 lines
Quoted 4 lines
Ok, creating an alternate attribute for non-mdev devices makes sense. However, wouldn't that rather be a case (3)? The change here only refers to mdev devices.
as you pointed below, (3) and (2) serve the same purpose. and I think a possible usage is to migrate between a non-mdev device and an mdev device. so I think it's better for them both to use (2) rather than creating (3).
Quoted 8 lines
An mdev type is meant to define a software compatible interface, so in the case of
mdev->mdevmigration, doesn't migrating to a different type fail the most basic of compatibility tests that we expect userspace to perform? IOW, if two mdev types are migration compatible, it seems a prerequisite to that is that they provide the same software interface, which means they should be the same mdev type.In the hybrid cases of
mdev->physorphys->mdev, how does amanagement
Quoted 5 lines
tool begin to even guess what might be compatible? Are we expecting libvirt to probe ever device with this attribute in the system? Is there going to be a new class hierarchy created to enumerate all possible migrate-able devices?
yes, management tool needs to guess and test migration compatible between two devices. But I think it's not the problem only for
mdev->physorphys->mdev. even formdev->mdev, management tool needs to
first assume that the two mdevs have the same type of parent devices (e.g.their pciids are equal). otherwise, it's still enumerating possibilities.Quoted 5 lines
on the other hand, for two mdevs,
mdev1 from pdev1, itsmdev_typeis 1/2 of pdev1;
mdev2 from pdev2, itsmdev_typeis 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between mdev1 <-> mdev2.Quoted 3 lines
How could the manage tool figure out that 1/2 of pdev1 is equivalent to 1/4 of pdev2? If we really want to allow such thing happen, the best choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this
migration_versioninterface. the management tool can take advantage of this interface to know if two devices are migration compatible, no matter they are mdevs, non-mdevs, or mix.as I know, (please correct me if not right), current libvirt still requires manually generating mdev devices, and it just duplicates src vm configuration to the target vm.
for libvirt, currently it's alwaysphys->physandmdev->mdev(and of the same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise, why do we need to introduce thismigration_versioninterface and leave the judgement of migration compatibility to vendor driver? why not simply set the criteria to something like "pciids of parent devices are equal, and mdev types are equal" ?Quoted 1 line
btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?
I think it just needs to read src
migration_versionunder src dev node, and test it in target migration version under target dev node.after all, through this interface we just help the upper layer knowing available options through reading and testing, and they decide to use it or not.
Quoted 7 lines
Can we simplify the requirement by allowing only mdev<->mdev and phys<->phys migration? If an customer does want to migrate between a mdev and phys, he could wrap physical device into a wrapped mdev instance (with the same type as the source mdev) instead of using vendor ops. Doing so does add some burden but if mdev<->phys is not dominant usage then such tradeoff might be worthywhile...
Quoted 9 lines
If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's easy for vendor driver to tell if a phys device is migration compatible to a mdev device according it supports it or not.Quoted 5 lines
It surprises me that the PCIID matching is a requirement; I'd assumed with this clever mdev name setup that you could migrate between two different models in a series, or to a newer model, as long as they both supported the same mdev view.
hi Dave
themigration_versionstring is transparent to userspace, and is completely defined by vendor driver.
I put it there just as an example of how vendor driver may implement it. e.g.
the srcmigration_versionstring is "src PCIID + src software version", then when this string is write to targetmigration_versionnode, the vendor driver in the target device will compare it with its own device info and software version.
If different models are allowed, the write just succeeds even PCIIDs in src and target are different.so, it is the vendor driver to define whether two devices are able to migrate, no matter their PCIIDs, mdev types, software versions..., which provides vendor driver full flexibility.
Quoted 9 lines
Quoted 1 line
do you think it's good?
Yeh that's OK; I guess it's going to need to have a big table in their with all the PCIIDs in.
The alternative would be to abstract it a little; e.g. to say it's an Intel-gpu-core-v4 and then it would be less worried about the exact clock speed etc - but yes you might be right htat PCIIDs might be best for checking for quirks.
glad that you are agreed with it:)
I think the vendor driver still can choose a way to abstract a little (e.g. Intel-gpu-core-v4...) if they think it's better. In that case, the migration_string would be something like "Intel-gpu-core-v4 + instance number + software version".
IOW, they can choose anything they think appropriate to identify migration compatibility of a device.
But Alex is right, we have to prevent namespace overlapping. So I think we need to ensure src and target devices are from the same vendors. or, any other ideas?
Thanks
Yan
Quoted 106 lines
Quoted 94 lines
Quoted 94 lines
Quoted 94 lines
Quoted 94 lines
Quoted 94 lines
Quoted 10 lines
I agree that there was a gap in the previous proposal for non-mdev devices, but I think this bring a lot of questions that we need to puzzle through and libvirt will need to re-evaluate how they might decide to pick a migration target device. For example, I'm sure libvirt would reject any policy decisions regarding picking a physical device versus an mdev device. Had we previously left it that only a layer above libvirt would select a target device and libvirt only tests compatibility to that target device?
I'm not sure if there's a layer above libvirt would select a target device. but if there is such a layer (even it's human), we need to provide an interface for them to know whether their decision is suitable for migration. The
migration_versioninterface provides a potential to allowmdev->physmigration, even libvirt may currently reject it.Quoted 4 lines
We also need to consider that this expands the namespace. If we no longer require matching types as the first level of comparison, then vendor migration strings can theoretically collide. How do we coordinate that can't happen? Thanks,
yes, it's indeed a problem.
could only allowing migration beteen devices from the same vendor be a good
prerequisite?Thanks
YanQuoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Quoted 4 lines
Is existence (and compatibility) of (1) a pre-req for possible existence (and compatibility) of (2)?
no. (2) does not reply on (1).
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Hm. Non-existence of (1) seems to imply "this type does not support migration". If an mdev created for such a type suddenly does support migration, it feels a bit odd.
yes. but I think if the condition happens, it should be reported a bug to vendor driver.
should I add a line in the doc like "vendor driver should ensure that the migration compatibility frommigration_versionundermdev_typeshouldbe
Quoted 5 lines
Quoted 5 lines
consistent with that from
migration_versionunder device node" ?Quoted 3 lines
(It obviously cannot be a prereq for what I called (3) above.)
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
Does userspace need to check (1) or can it completely rely on (2), if it so chooses?
I think it can completely reply on (2) if compatibility check before mdev creation is not required.
Quoted 1 line
If devices with a different mdev type are indeed compatible, it
seems
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
Quoted 2 lines
userspace can only find out after the devices have actually been created, as (1) does not apply?
yes, I think so.
How useful would it be for userspace to even look at (1) in that case? It only knows if things have a chance of working if it actually goes ahead and creates devices.
Quoted 7 lines
Quoted 7 lines
hmm, is it useful for userspace to test the
migration_versionunder mdev type before it knows what mdev device to generate ?
like when the userspace wants to migrate an mdev device in src vm, but it has not created target vm and the target mdev device.Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
One of my worries is that the existence of an attribute with the
same
Quoted 22 lines
Quoted 21 lines
Quoted 11 lines
Quoted 6 lines
Quoted 3 lines
name in two similar locations might lead to confusion. But maybe it isn't a problem.
Yes, I have the same feeling. but as (2) is for sysfs interface consistency, to make it transparent to userspace tools like libvirt, I guess the same name is necessary?
What do we actually need here, I wonder? (1) and (2) seem to serve slightly different purposes, while (2) and what I called (3) have the same purpose. Is it important to userspace that (1) and (2) have the same name?
so change (1) to
migration_type_versionand (2) tomigration_instance_version?
But as they are under different locations, could that location imply enough information?Thanks
YanQuoted 9 lines
Quoted 8 lines
Quoted 5 lines
Quoted 4 lines
Quoted 4 lines
_______________________________________________
intel-gvt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gvt-dev--
Dr. David Alan Gilbert / [email protected] / Manchester, UK--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 171 lines · * Yan Zhao ([email protected]) wrote:
Quoted 161 lines · Dr. David Alan Gilbert
Quoted 160 lines · * Yan Zhao ([email protected]) wrote:
Quoted 138 lines · Dr. David Alan Gilbert
Quoted 127 lines · * Yan Zhao ([email protected]) wrote:
Quoted 89 lines · Kevin
Quoted 83 lines
From: Yan Zhao
Sent: Tuesday, April 21, 2020 10:37 AMQuoted 4 lines · Alex Williamson
Quoted 1 line · On Sun, 19 Apr 2020 21:24:57 -0400 Yan Zhao <[email protected]> wrote:
On Fri, Apr 17, 2020 at 07:24:57PM +0800, Cornelia Huck wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · On Fri, 17 Apr 2020 05:52:02 -0400 Yan Zhao <[email protected]> wrote:
Quoted 4 lines · Cornelia Huck
Quoted 1 line · On Mon, 13 Apr 2020 01:52:01 -0400 Yan Zhao <[email protected]> wrote:
This patchset introduces a migration_version attribute under sysfs
of VFIO
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Mediated devices.
This migration_version attribute is used to check migration
compatibility
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
between two mdev devices.
Currently, it has two locations:
(1) under mdev_type node,
which can be used even before device creation, but only formdev
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, butthe src
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
and target mdev devices are not necessarily be of the same
mdev type
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
(The second location is newly added in v5, in order to keep
consistent
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
with the migration_version node for migratable pass-though
devices)
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
What is the relationship between those two attributes?
(1) is for mdev devices specifically, and (2) is provided to keep the
same
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
sysfs interface as with non-mdev cases. so (2) is for both mdev
devices and
Quoted 17 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
non-mdev devices.
in future, if we enable vfio-pci vendor ops, (i.e. a non-mdev device is binding to vfio-pci, but is able to register migration region and do migration transactions from a vendor provided affiliate driver), the vendor driver would export (2) directly, under device node. It is not able to provide (1) as there're no mdev devices involved.
Quoted 8 lines
Quoted 4 lines
Ok, creating an alternate attribute for non-mdev devices makes sense. However, wouldn't that rather be a case (3)? The change here only refers to mdev devices.
as you pointed below, (3) and (2) serve the same purpose. and I think a possible usage is to migrate between a non-mdev device and an mdev device. so I think it's better for them both to use (2) rather than creating (3).
Quoted 8 lines
An mdev type is meant to define a software compatible interface, so in the case of
mdev->mdevmigration, doesn't migrating to a different type fail the most basic of compatibility tests that we expect userspace to perform? IOW, if two mdev types are migration compatible, it seems a prerequisite to that is that they provide the same software interface, which means they should be the same mdev type.In the hybrid cases of
mdev->physorphys->mdev, how does amanagement
Quoted 5 lines
tool begin to even guess what might be compatible? Are we expecting libvirt to probe ever device with this attribute in the system? Is there going to be a new class hierarchy created to enumerate all possible migrate-able devices?
yes, management tool needs to guess and test migration compatible between two devices. But I think it's not the problem only for
mdev->physorphys->mdev. even formdev->mdev, management tool needs to
first assume that the two mdevs have the same type of parent devices (e.g.their pciids are equal). otherwise, it's still enumerating possibilities.Quoted 5 lines
on the other hand, for two mdevs,
mdev1 from pdev1, itsmdev_typeis 1/2 of pdev1;
mdev2 from pdev2, itsmdev_typeis 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between mdev1 <-> mdev2.Quoted 3 lines
How could the manage tool figure out that 1/2 of pdev1 is equivalent to 1/4 of pdev2? If we really want to allow such thing happen, the best choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this
migration_versioninterface. the management tool can take advantage of this interface to know if two devices are migration compatible, no matter they are mdevs, non-mdevs, or mix.as I know, (please correct me if not right), current libvirt still requires manually generating mdev devices, and it just duplicates src vm configuration to the target vm.
for libvirt, currently it's alwaysphys->physandmdev->mdev(and of the same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise, why do we need to introduce thismigration_versioninterface and leave the judgement of migration compatibility to vendor driver? why not simply set the criteria to something like "pciids of parent devices are equal, and mdev types are equal" ?Quoted 1 line
btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?
I think it just needs to read src
migration_versionunder src dev node, and test it in target migration version under target dev node.after all, through this interface we just help the upper layer knowing available options through reading and testing, and they decide to use it or not.
Quoted 7 lines
Can we simplify the requirement by allowing only mdev<->mdev and phys<->phys migration? If an customer does want to migrate between a mdev and phys, he could wrap physical device into a wrapped mdev instance (with the same type as the source mdev) instead of using vendor ops. Doing so does add some burden but if mdev<->phys is not dominant usage then such tradeoff might be worthywhile...
Quoted 9 lines
If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's easy for vendor driver to tell if a phys device is migration compatible to a mdev device according it supports it or not.Quoted 5 lines
It surprises me that the PCIID matching is a requirement; I'd assumed with this clever mdev name setup that you could migrate between two different models in a series, or to a newer model, as long as they both supported the same mdev view.
hi Dave
themigration_versionstring is transparent to userspace, and is completely defined by vendor driver.
I put it there just as an example of how vendor driver may implement it. e.g.
the srcmigration_versionstring is "src PCIID + src software version", then when this string is write to targetmigration_versionnode, the vendor driver in the target device will compare it with its own device info and software version.
If different models are allowed, the write just succeeds even PCIIDs in src and target are different.so, it is the vendor driver to define whether two devices are able to migrate, no matter their PCIIDs, mdev types, software versions..., which provides vendor driver full flexibility.
Quoted 9 lines
Quoted 1 line
do you think it's good?
Yeh that's OK; I guess it's going to need to have a big table in their with all the PCIIDs in.
The alternative would be to abstract it a little; e.g. to say it's an Intel-gpu-core-v4 and then it would be less worried about the exact clock speed etc - but yes you might be right htat PCIIDs might be best for checking for quirks.
Quoted 10 lines
glad that you are agreed with it:)
I think the vendor driver still can choose a way to abstract a little (e.g. Intel-gpu-core-v4...) if they think it's better. In that case, themigration_stringwould be something like "Intel-gpu-core-v4 + instance number + software version".
IOW, they can choose anything they think appropriate to identify migration compatibility of a device.
But Alex is right, we have to prevent namespace overlapping. So I think we need to ensure src and target devices are from the same vendors. or, any other ideas?
That's why I kept the 'Intel' in that example; or PCI vendor ID; I was only really trying to say that within one vendors range there are often a lot of PCI-IDs that have really minor variations.
Dave
Quoted 111 lines
Thanks
YanQuoted 106 lines
Quoted 94 lines
Quoted 94 lines
Quoted 94 lines
Quoted 94 lines
Quoted 94 lines
Quoted 10 lines
I agree that there was a gap in the previous proposal for non-mdev devices, but I think this bring a lot of questions that we need to puzzle through and libvirt will need to re-evaluate how they might decide to pick a migration target device. For example, I'm sure libvirt would reject any policy decisions regarding picking a physical device versus an mdev device. Had we previously left it that only a layer above libvirt would select a target device and libvirt only tests compatibility to that target device?
I'm not sure if there's a layer above libvirt would select a target device. but if there is such a layer (even it's human), we need to provide an interface for them to know whether their decision is suitable for migration. The
migration_versioninterface provides a potential to allowmdev->physmigration, even libvirt may currently reject it.Quoted 4 lines
We also need to consider that this expands the namespace. If we no longer require matching types as the first level of comparison, then vendor migration strings can theoretically collide. How do we coordinate that can't happen? Thanks,
yes, it's indeed a problem.
could only allowing migration beteen devices from the same vendor be a good
prerequisite?Thanks
YanQuoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Quoted 4 lines
Is existence (and compatibility) of (1) a pre-req for possible existence (and compatibility) of (2)?
no. (2) does not reply on (1).
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Hm. Non-existence of (1) seems to imply "this type does not support migration". If an mdev created for such a type suddenly does support migration, it feels a bit odd.
yes. but I think if the condition happens, it should be reported a bug to vendor driver.
should I add a line in the doc like "vendor driver should ensure that the migration compatibility frommigration_versionundermdev_typeshouldbe
Quoted 5 lines
Quoted 5 lines
consistent with that from
migration_versionunder device node" ?Quoted 3 lines
(It obviously cannot be a prereq for what I called (3) above.)
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
Does userspace need to check (1) or can it completely rely on (2), if it so chooses?
I think it can completely reply on (2) if compatibility check before mdev creation is not required.
Quoted 1 line
If devices with a different mdev type are indeed compatible, it
seems
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
Quoted 2 lines
userspace can only find out after the devices have actually been created, as (1) does not apply?
yes, I think so.
How useful would it be for userspace to even look at (1) in that case? It only knows if things have a chance of working if it actually goes ahead and creates devices.
Quoted 7 lines
Quoted 7 lines
hmm, is it useful for userspace to test the
migration_versionunder mdev type before it knows what mdev device to generate ?
like when the userspace wants to migrate an mdev device in src vm, but it has not created target vm and the target mdev device.Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
One of my worries is that the existence of an attribute with the
same
Quoted 22 lines
Quoted 21 lines
Quoted 11 lines
Quoted 6 lines
Quoted 3 lines
name in two similar locations might lead to confusion. But maybe it isn't a problem.
Yes, I have the same feeling. but as (2) is for sysfs interface consistency, to make it transparent to userspace tools like libvirt, I guess the same name is necessary?
What do we actually need here, I wonder? (1) and (2) seem to serve slightly different purposes, while (2) and what I called (3) have the same purpose. Is it important to userspace that (1) and (2) have the same name?
so change (1) to
migration_type_versionand (2) tomigration_instance_version?
But as they are under different locations, could that location imply enough information?Thanks
YanQuoted 9 lines
Quoted 8 lines
Quoted 5 lines
Quoted 4 lines
Quoted 4 lines
_______________________________________________
intel-gvt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gvt-dev--
Dr. David Alan Gilbert / [email protected] / Manchester, UK--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 183 lines · Dr. David Alan Gilbert
Quoted 171 lines · * Yan Zhao ([email protected]) wrote:
Quoted 161 lines · Dr. David Alan Gilbert
Quoted 160 lines · * Yan Zhao ([email protected]) wrote:
Quoted 138 lines · Dr. David Alan Gilbert
Quoted 127 lines · * Yan Zhao ([email protected]) wrote:
Quoted 89 lines · Kevin
Quoted 83 lines
From: Yan Zhao
Sent: Tuesday, April 21, 2020 10:37 AMQuoted 4 lines · Alex Williamson
Quoted 1 line · On Sun, 19 Apr 2020 21:24:57 -0400 Yan Zhao <[email protected]> wrote:
On Fri, Apr 17, 2020 at 07:24:57PM +0800, Cornelia Huck wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · On Fri, 17 Apr 2020 05:52:02 -0400 Yan Zhao <[email protected]> wrote:
Quoted 4 lines · Cornelia Huck
On Mon, 13 Apr 2020 01:52:01 -0400
Yan Zhao <[email protected]> wrote:This patchset introduces a migration_version attribute under sysfs
of VFIO
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Mediated devices.
This migration_version attribute is used to check migration
compatibility
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
between two mdev devices.
Currently, it has two locations:
(1) under mdev_type node,
which can be used even before device creation, but only formdev
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, butthe src
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
and target mdev devices are not necessarily be of the same
mdev type
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
(The second location is newly added in v5, in order to keep
consistent
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
with the migration_version node for migratable pass-though
devices)
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 3 lines
What is the relationship between those two attributes?
(1) is for mdev devices specifically, and (2) is provided to keep the
same
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
sysfs interface as with non-mdev cases. so (2) is for both mdev
devices and
Quoted 17 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
non-mdev devices.
in future, if we enable vfio-pci vendor ops, (i.e. a non-mdev device is binding to vfio-pci, but is able to register migration region and do migration transactions from a vendor provided affiliate driver), the vendor driver would export (2) directly, under device node. It is not able to provide (1) as there're no mdev devices involved.
Quoted 8 lines
Quoted 4 lines
Ok, creating an alternate attribute for non-mdev devices makes sense. However, wouldn't that rather be a case (3)? The change here only refers to mdev devices.
as you pointed below, (3) and (2) serve the same purpose. and I think a possible usage is to migrate between a non-mdev device and an mdev device. so I think it's better for them both to use (2) rather than creating (3).
Quoted 8 lines
An mdev type is meant to define a software compatible interface, so in the case of
mdev->mdevmigration, doesn't migrating to a different type fail the most basic of compatibility tests that we expect userspace to perform? IOW, if two mdev types are migration compatible, it seems a prerequisite to that is that they provide the same software interface, which means they should be the same mdev type.In the hybrid cases of
mdev->physorphys->mdev, how does amanagement
Quoted 5 lines
tool begin to even guess what might be compatible? Are we expecting libvirt to probe ever device with this attribute in the system? Is there going to be a new class hierarchy created to enumerate all possible migrate-able devices?
yes, management tool needs to guess and test migration compatible between two devices. But I think it's not the problem only for
mdev->physorphys->mdev. even formdev->mdev, management tool needs to
first assume that the two mdevs have the same type of parent devices (e.g.their pciids are equal). otherwise, it's still enumerating possibilities.Quoted 5 lines
on the other hand, for two mdevs,
mdev1 from pdev1, itsmdev_typeis 1/2 of pdev1;
mdev2 from pdev2, itsmdev_typeis 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between mdev1 <-> mdev2.Quoted 3 lines
How could the manage tool figure out that 1/2 of pdev1 is equivalent to 1/4 of pdev2? If we really want to allow such thing happen, the best choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this
migration_versioninterface. the management tool can take advantage of this interface to know if two devices are migration compatible, no matter they are mdevs, non-mdevs, or mix.as I know, (please correct me if not right), current libvirt still requires manually generating mdev devices, and it just duplicates src vm configuration to the target vm.
for libvirt, currently it's alwaysphys->physandmdev->mdev(and of the same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise, why do we need to introduce thismigration_versioninterface and leave the judgement of migration compatibility to vendor driver? why not simply set the criteria to something like "pciids of parent devices are equal, and mdev types are equal" ?Quoted 1 line
btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?
I think it just needs to read src
migration_versionunder src dev node, and test it in target migration version under target dev node.after all, through this interface we just help the upper layer knowing available options through reading and testing, and they decide to use it or not.
Quoted 7 lines
Can we simplify the requirement by allowing only mdev<->mdev and phys<->phys migration? If an customer does want to migrate between a mdev and phys, he could wrap physical device into a wrapped mdev instance (with the same type as the source mdev) instead of using vendor ops. Doing so does add some burden but if mdev<->phys is not dominant usage then such tradeoff might be worthywhile...
Quoted 9 lines
If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's easy for vendor driver to tell if a phys device is migration compatible to a mdev device according it supports it or not.Quoted 5 lines
It surprises me that the PCIID matching is a requirement; I'd assumed with this clever mdev name setup that you could migrate between two different models in a series, or to a newer model, as long as they both supported the same mdev view.
hi Dave
themigration_versionstring is transparent to userspace, and is completely defined by vendor driver.
I put it there just as an example of how vendor driver may implement it. e.g.
the srcmigration_versionstring is "src PCIID + src software version", then when this string is write to targetmigration_versionnode, the vendor driver in the target device will compare it with its own device info and software version.
If different models are allowed, the write just succeeds even PCIIDs in src and target are different.so, it is the vendor driver to define whether two devices are able to migrate, no matter their PCIIDs, mdev types, software versions..., which provides vendor driver full flexibility.
Quoted 9 lines
Quoted 1 line
do you think it's good?
Yeh that's OK; I guess it's going to need to have a big table in their with all the PCIIDs in.
The alternative would be to abstract it a little; e.g. to say it's an Intel-gpu-core-v4 and then it would be less worried about the exact clock speed etc - but yes you might be right htat PCIIDs might be best for checking for quirks.Quoted 10 lines
glad that you are agreed with it:)
I think the vendor driver still can choose a way to abstract a little (e.g. Intel-gpu-core-v4...) if they think it's better. In that case, themigration_stringwould be something like "Intel-gpu-core-v4 + instance number + software version".
IOW, they can choose anything they think appropriate to identify migration compatibility of a device.
But Alex is right, we have to prevent namespace overlapping. So I think we need to ensure src and target devices are from the same vendors. or, any other ideas?
Quoted 1 line
That's why I kept the 'Intel' in that example; or PCI vendor ID; I was
Yes, it's a good idea!
could we add a line in the doc saying that
it is the vendor driver to add a unique string to avoid namespace collision?
Quoted 2 lines
only really trying to say that within one vendors range there are often a lot of PCI-IDs that have really minor variations.
Yes. I also prefer to include PCI-IDs.
BTW, sometimes even the same PCI-ID does not guarantee two devices are of no difference or are migration compatible. for example, two local NVMe devices may have the same PCI-ID but are configured to two different remote NVMe devices. the vendor driver needs to add extra info besides PCI-IDs then.
Thanks
Yan
Quoted 114 lines
Quoted 103 lines
Quoted 103 lines
Quoted 103 lines
Quoted 103 lines
Quoted 103 lines
Quoted 102 lines
Quoted 102 lines
Quoted 6 lines
Quoted 8 lines
I agree that there was a gap in the previous proposal for non-mdev devices, but I think this bring a lot of questions that we need to puzzle through and libvirt will need to re-evaluate how they might decide to pick a migration target device. For example, I'm sure libvirt would reject any policy decisions regarding picking a physical device versus an mdev device. Had we previously left it that only a layer above libvirt would select a target device and libvirt only tests compatibility to that target device?
I'm not sure if there's a layer above libvirt would select a target device. but if there is such a layer (even it's human), we need to provide an interface for them to know whether their decision is suitable for migration. The
migration_versioninterface provides a potential to allowmdev->physmigration, even libvirt may currently reject it.Quoted 4 lines
We also need to consider that this expands the namespace. If we no longer require matching types as the first level of comparison, then vendor migration strings can theoretically collide. How do we coordinate that can't happen? Thanks,
yes, it's indeed a problem.
could only allowing migration beteen devices from the same vendor be a good
prerequisite?Thanks
YanQuoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Quoted 4 lines
Is existence (and compatibility) of (1) a pre-req for possible
existence (and compatibility) of (2)?no. (2) does not reply on (1).
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Hm. Non-existence of (1) seems to imply "this type does not support migration". If an mdev created for such a type suddenly does support migration, it feels a bit odd.
yes. but I think if the condition happens, it should be reported a bug to vendor driver.
should I add a line in the doc like "vendor driver should ensure that the migration compatibility frommigration_versionundermdev_typeshouldbe
Quoted 5 lines
Quoted 5 lines
consistent with that from
migration_versionunder device node" ?Quoted 3 lines
(It obviously cannot be a prereq for what I called (3) above.)
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
Does userspace need to check (1) or can it completely rely on (2), if
it so chooses?I think it can completely reply on (2) if compatibility check before mdev creation is not required.
Quoted 1 line
If devices with a different mdev type are indeed compatible, it
seems
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
Quoted 2 lines
userspace can only find out after the devices have actually been
created, as (1) does not apply?yes, I think so.
How useful would it be for userspace to even look at (1) in that case? It only knows if things have a chance of working if it actually goes ahead and creates devices.
Quoted 7 lines
Quoted 7 lines
hmm, is it useful for userspace to test the
migration_versionunder mdev type before it knows what mdev device to generate ?
like when the userspace wants to migrate an mdev device in src vm, but it has not created target vm and the target mdev device.Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
One of my worries is that the existence of an attribute with the
same
Quoted 17 lines
Quoted 17 lines
Quoted 11 lines
Quoted 6 lines
Quoted 3 lines
name in two similar locations might lead to confusion. But maybe it
isn't a problem.Yes, I have the same feeling. but as (2) is for sysfs interface consistency, to make it transparent to userspace tools like libvirt, I guess the same name is necessary?
What do we actually need here, I wonder? (1) and (2) seem to serve slightly different purposes, while (2) and what I called (3) have the same purpose. Is it important to userspace that (1) and (2) have the same name?
so change (1) to
migration_type_versionand (2) tomigration_instance_version?
But as they are under different locations, could that location imply enough information?Quoted 5 lines
Quoted 4 lines
Thanks
Yan_______________________________________________
intel-gvt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gvt-devQuoted 8 lines
Quoted 7 lines
Quoted 4 lines
Quoted 3 lines
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK--
Dr. David Alan Gilbert / [email protected] / Manchester, UK--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 184 lines · * Yan Zhao ([email protected]) wrote:
Quoted 183 lines · Dr. David Alan Gilbert
Quoted 181 lines · * Yan Zhao ([email protected]) wrote:
Quoted 161 lines · Dr. David Alan Gilbert
Quoted 160 lines · * Yan Zhao ([email protected]) wrote:
Quoted 138 lines · Dr. David Alan Gilbert
Quoted 127 lines · * Yan Zhao ([email protected]) wrote:
Quoted 89 lines · Kevin
Quoted 83 lines
From: Yan Zhao
Sent: Tuesday, April 21, 2020 10:37 AMQuoted 4 lines · Alex Williamson
Quoted 1 line · On Sun, 19 Apr 2020 21:24:57 -0400 Yan Zhao <[email protected]> wrote:
On Fri, Apr 17, 2020 at 07:24:57PM +0800, Cornelia Huck wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · On Fri, 17 Apr 2020 05:52:02 -0400 Yan Zhao <[email protected]> wrote:
On Fri, Apr 17, 2020 at 04:44:50PM +0800, Cornelia Huck wrote:
On Mon, 13 Apr 2020 01:52:01 -0400
Yan Zhao <[email protected]> wrote:This patchset introduces a migration_version attribute under sysfs
of VFIO
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Mediated devices.
This migration_version attribute is used to check migration
compatibility
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
between two mdev devices.
Currently, it has two locations:
(1) under mdev_type node,
which can be used even before device creation, but only formdev
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, butthe src
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
and target mdev devices are not necessarily be of the same
mdev type
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
(The second location is newly added in v5, in order to keep
consistent
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
with the migration_version node for migratable pass-though
devices)
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
What is the relationship between those two attributes?
(1) is for mdev devices specifically, and (2) is provided to keep the
same
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
sysfs interface as with non-mdev cases. so (2) is for both mdev
devices and
Quoted 17 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
non-mdev devices.
in future, if we enable vfio-pci vendor ops, (i.e. a non-mdev device
is binding to vfio-pci, but is able to register migration region and do
migration transactions from a vendor provided affiliate driver),
the vendor driver would export (2) directly, under device node.
It is not able to provide (1) as there're no mdev devices involved.Quoted 8 lines
Quoted 4 lines
Ok, creating an alternate attribute for non-mdev devices makes sense. However, wouldn't that rather be a case (3)? The change here only refers to mdev devices.
as you pointed below, (3) and (2) serve the same purpose. and I think a possible usage is to migrate between a non-mdev device and an mdev device. so I think it's better for them both to use (2) rather than creating (3).
Quoted 8 lines
An mdev type is meant to define a software compatible interface, so in the case of
mdev->mdevmigration, doesn't migrating to a different type fail the most basic of compatibility tests that we expect userspace to perform? IOW, if two mdev types are migration compatible, it seems a prerequisite to that is that they provide the same software interface, which means they should be the same mdev type.In the hybrid cases of
mdev->physorphys->mdev, how does amanagement
Quoted 5 lines
tool begin to even guess what might be compatible? Are we expecting libvirt to probe ever device with this attribute in the system? Is there going to be a new class hierarchy created to enumerate all possible migrate-able devices?
yes, management tool needs to guess and test migration compatible between two devices. But I think it's not the problem only for
mdev->physorphys->mdev. even formdev->mdev, management tool needs to
first assume that the two mdevs have the same type of parent devices (e.g.their pciids are equal). otherwise, it's still enumerating possibilities.Quoted 5 lines
on the other hand, for two mdevs,
mdev1 from pdev1, itsmdev_typeis 1/2 of pdev1;
mdev2 from pdev2, itsmdev_typeis 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between mdev1 <-> mdev2.Quoted 3 lines
How could the manage tool figure out that 1/2 of pdev1 is equivalent to 1/4 of pdev2? If we really want to allow such thing happen, the best choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this
migration_versioninterface. the management tool can take advantage of this interface to know if two devices are migration compatible, no matter they are mdevs, non-mdevs, or mix.as I know, (please correct me if not right), current libvirt still requires manually generating mdev devices, and it just duplicates src vm configuration to the target vm.
for libvirt, currently it's alwaysphys->physandmdev->mdev(and of the same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise, why do we need to introduce thismigration_versioninterface and leave the judgement of migration compatibility to vendor driver? why not simply set the criteria to something like "pciids of parent devices are equal, and mdev types are equal" ?Quoted 1 line
btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?
I think it just needs to read src
migration_versionunder src dev node, and test it in target migration version under target dev node.after all, through this interface we just help the upper layer knowing available options through reading and testing, and they decide to use it or not.
Quoted 7 lines
Can we simplify the requirement by allowing only mdev<->mdev and phys<->phys migration? If an customer does want to migrate between a mdev and phys, he could wrap physical device into a wrapped mdev instance (with the same type as the source mdev) instead of using vendor ops. Doing so does add some burden but if mdev<->phys is not dominant usage then such tradeoff might be worthywhile...
Quoted 9 lines
If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's easy for vendor driver to tell if a phys device is migration compatible to a mdev device according it supports it or not.Quoted 5 lines
It surprises me that the PCIID matching is a requirement; I'd assumed with this clever mdev name setup that you could migrate between two different models in a series, or to a newer model, as long as they both supported the same mdev view.
hi Dave
themigration_versionstring is transparent to userspace, and is completely defined by vendor driver.
I put it there just as an example of how vendor driver may implement it. e.g.
the srcmigration_versionstring is "src PCIID + src software version", then when this string is write to targetmigration_versionnode, the vendor driver in the target device will compare it with its own device info and software version.
If different models are allowed, the write just succeeds even PCIIDs in src and target are different.so, it is the vendor driver to define whether two devices are able to migrate, no matter their PCIIDs, mdev types, software versions..., which provides vendor driver full flexibility.
Quoted 9 lines
Quoted 1 line
do you think it's good?
Yeh that's OK; I guess it's going to need to have a big table in their with all the PCIIDs in.
The alternative would be to abstract it a little; e.g. to say it's an Intel-gpu-core-v4 and then it would be less worried about the exact clock speed etc - but yes you might be right htat PCIIDs might be best for checking for quirks.glad that you are agreed with it:)
I think the vendor driver still can choose a way to abstract a little (e.g. Intel-gpu-core-v4...) if they think it's better. In that case, themigration_stringwould be something like "Intel-gpu-core-v4 + instance number + software version".
IOW, they can choose anything they think appropriate to identify migration compatibility of a device.
But Alex is right, we have to prevent namespace overlapping. So I think we need to ensure src and target devices are from the same vendors. or, any other ideas?
Quoted 5 lines
Quoted 1 line
That's why I kept the 'Intel' in that example; or PCI vendor ID; I was
Yes, it's a good idea!
could we add a line in the doc saying that
it is the vendor driver to add a unique string to avoid namespace collision?
So why don't we split the difference; lets say that it should start with the hex PCI Vendor ID.
Quoted 7 lines
Quoted 2 lines
only really trying to say that within one vendors range there are often a lot of PCI-IDs that have really minor variations.
Yes. I also prefer to include PCI-IDs.
BTW, sometimes even the same PCI-ID does not guarantee two devices are of no difference or are migration compatible. for example, two local NVMe devices may have the same PCI-ID but are configured to two different remote NVMe devices. the vendor driver needs to add extra info besides PCI-IDs then.
Ah, yes that's an interesting example.
Dave
Quoted 118 lines
Thanks
YanQuoted 114 lines
Quoted 103 lines
Quoted 103 lines
Quoted 103 lines
Quoted 103 lines
Quoted 103 lines
Quoted 102 lines
Quoted 102 lines
Quoted 6 lines
Quoted 8 lines
I agree that there was a gap in the previous proposal for non-mdev devices, but I think this bring a lot of questions that we need to puzzle through and libvirt will need to re-evaluate how they might decide to pick a migration target device. For example, I'm sure libvirt would reject any policy decisions regarding picking a physical device versus an mdev device. Had we previously left it that only a layer above libvirt would select a target device and libvirt only tests compatibility to that target device?
I'm not sure if there's a layer above libvirt would select a target device. but if there is such a layer (even it's human), we need to provide an interface for them to know whether their decision is suitable for migration. The
migration_versioninterface provides a potential to allowmdev->physmigration, even libvirt may currently reject it.Quoted 4 lines
We also need to consider that this expands the namespace. If we no longer require matching types as the first level of comparison, then vendor migration strings can theoretically collide. How do we coordinate that can't happen? Thanks,
yes, it's indeed a problem.
could only allowing migration beteen devices from the same vendor be a good
prerequisite?Thanks
YanQuoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Is existence (and compatibility) of (1) a pre-req for possible
existence (and compatibility) of (2)?no. (2) does not reply on (1).
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Hm. Non-existence of (1) seems to imply "this type does not support migration". If an mdev created for such a type suddenly does support migration, it feels a bit odd.
yes. but I think if the condition happens, it should be reported a bug to vendor driver.
should I add a line in the doc like "vendor driver should ensure that the migration compatibility frommigration_versionundermdev_typeshouldbe
Quoted 5 lines
Quoted 5 lines
consistent with that from
migration_versionunder device node" ?Quoted 3 lines
(It obviously cannot be a prereq for what I called (3) above.)
Quoted 1 line
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Does userspace need to check (1) or can it completely rely on (2), if
it so chooses?I think it can completely reply on (2) if compatibility check before
mdev creation is not required.If devices with a different mdev type are indeed compatible, it
seems
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
userspace can only find out after the devices have actually been
created, as (1) does not apply?
yes, I think so.How useful would it be for userspace to even look at (1) in that case? It only knows if things have a chance of working if it actually goes ahead and creates devices.
Quoted 7 lines
Quoted 7 lines
hmm, is it useful for userspace to test the
migration_versionunder mdev type before it knows what mdev device to generate ?
like when the userspace wants to migrate an mdev device in src vm, but it has not created target vm and the target mdev device.Quoted 2 lines
Quoted 2 lines
One of my worries is that the existence of an attribute with the
same
Quoted 17 lines
Quoted 17 lines
Quoted 11 lines
Quoted 6 lines
name in two similar locations might lead to confusion. But maybe it
isn't a problem.Yes, I have the same feeling. but as (2) is for sysfs interface
consistency, to make it transparent to userspace tools like libvirt,
I guess the same name is necessary?What do we actually need here, I wonder? (1) and (2) seem to serve slightly different purposes, while (2) and what I called (3) have the same purpose. Is it important to userspace that (1) and (2) have the same name?
so change (1) to
migration_type_versionand (2) tomigration_instance_version?
But as they are under different locations, could that location imply enough information?Quoted 5 lines
Quoted 4 lines
Thanks
Yan_______________________________________________
intel-gvt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gvt-devQuoted 8 lines
Quoted 7 lines
Quoted 4 lines
Quoted 3 lines
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK--
Dr. David Alan Gilbert / [email protected] / Manchester, UK--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 185 lines · Dr. David Alan Gilbert
Quoted 184 lines · * Yan Zhao ([email protected]) wrote:
Quoted 183 lines · Dr. David Alan Gilbert
Quoted 181 lines · * Yan Zhao ([email protected]) wrote:
Quoted 161 lines · Dr. David Alan Gilbert
Quoted 160 lines · * Yan Zhao ([email protected]) wrote:
Quoted 138 lines · Dr. David Alan Gilbert
Quoted 127 lines · * Yan Zhao ([email protected]) wrote:
Quoted 89 lines · Kevin
Quoted 83 lines
From: Yan Zhao
Sent: Tuesday, April 21, 2020 10:37 AMQuoted 4 lines · Alex Williamson
Quoted 1 line · On Sun, 19 Apr 2020 21:24:57 -0400 Yan Zhao <[email protected]> wrote:
On Fri, Apr 17, 2020 at 07:24:57PM +0800, Cornelia Huck wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
On Fri, 17 Apr 2020 05:52:02 -0400
Yan Zhao <[email protected]> wrote:On Fri, Apr 17, 2020 at 04:44:50PM +0800, Cornelia Huck wrote:
On Mon, 13 Apr 2020 01:52:01 -0400
Yan Zhao <[email protected]> wrote:This patchset introduces a migration_version attribute under sysfs
of VFIO
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Mediated devices.
This migration_version attribute is used to check migration
compatibility
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
between two mdev devices.
Currently, it has two locations:
(1) under mdev_type node,
which can be used even before device creation, but only formdev
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, butthe src
Quoted 1 line
Quoted 1 line
Quoted 1 line
and target mdev devices are not necessarily be of the same
mdev type
Quoted 1 line
Quoted 1 line
Quoted 1 line
(The second location is newly added in v5, in order to keep
consistent
Quoted 1 line
Quoted 1 line
Quoted 1 line
with the migration_version node for migratable pass-though
devices)
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
What is the relationship between those two attributes?
(1) is for mdev devices specifically, and (2) is provided to keep the
same
Quoted 1 line
Quoted 1 line
Quoted 1 line
sysfs interface as with non-mdev cases. so (2) is for both mdev
devices and
Quoted 17 lines
Quoted 8 lines
Quoted 8 lines
non-mdev devices.
in future, if we enable vfio-pci vendor ops, (i.e. a non-mdev device
is binding to vfio-pci, but is able to register migration region and do
migration transactions from a vendor provided affiliate driver),
the vendor driver would export (2) directly, under device node.
It is not able to provide (1) as there're no mdev devices involved.Quoted 8 lines
Quoted 4 lines
Ok, creating an alternate attribute for non-mdev devices makes sense.
However, wouldn't that rather be a case (3)? The change here only
refers to mdev devices.as you pointed below, (3) and (2) serve the same purpose. and I think a possible usage is to migrate between a non-mdev device and an mdev device. so I think it's better for them both to use (2) rather than creating (3).
Quoted 8 lines
An mdev type is meant to define a software compatible interface, so in the case of
mdev->mdevmigration, doesn't migrating to a different type fail the most basic of compatibility tests that we expect userspace to perform? IOW, if two mdev types are migration compatible, it seems a prerequisite to that is that they provide the same software interface, which means they should be the same mdev type.In the hybrid cases of
mdev->physorphys->mdev, how does amanagement
Quoted 5 lines
tool begin to even guess what might be compatible? Are we expecting libvirt to probe ever device with this attribute in the system? Is there going to be a new class hierarchy created to enumerate all possible migrate-able devices?
yes, management tool needs to guess and test migration compatible between two devices. But I think it's not the problem only for
mdev->physorphys->mdev. even formdev->mdev, management tool needs to
first assume that the two mdevs have the same type of parent devices (e.g.their pciids are equal). otherwise, it's still enumerating possibilities.Quoted 5 lines
on the other hand, for two mdevs,
mdev1 from pdev1, itsmdev_typeis 1/2 of pdev1;
mdev2 from pdev2, itsmdev_typeis 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between mdev1 <-> mdev2.Quoted 3 lines
How could the manage tool figure out that 1/2 of pdev1 is equivalent to 1/4 of pdev2? If we really want to allow such thing happen, the best choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this
migration_versioninterface. the management tool can take advantage of this interface to know if two devices are migration compatible, no matter they are mdevs, non-mdevs, or mix.as I know, (please correct me if not right), current libvirt still requires manually generating mdev devices, and it just duplicates src vm configuration to the target vm.
for libvirt, currently it's alwaysphys->physandmdev->mdev(and of the same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise, why do we need to introduce thismigration_versioninterface and leave the judgement of migration compatibility to vendor driver? why not simply set the criteria to something like "pciids of parent devices are equal, and mdev types are equal" ?Quoted 1 line
btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?
I think it just needs to read src
migration_versionunder src dev node, and test it in target migration version under target dev node.after all, through this interface we just help the upper layer knowing available options through reading and testing, and they decide to use it or not.
Quoted 7 lines
Can we simplify the requirement by allowing only mdev<->mdev and phys<->phys migration? If an customer does want to migrate between a mdev and phys, he could wrap physical device into a wrapped mdev instance (with the same type as the source mdev) instead of using vendor ops. Doing so does add some burden but if mdev<->phys is not dominant usage then such tradeoff might be worthywhile...
Quoted 9 lines
If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's easy for vendor driver to tell if a phys device is migration compatible to a mdev device according it supports it or not.Quoted 5 lines
It surprises me that the PCIID matching is a requirement; I'd assumed with this clever mdev name setup that you could migrate between two different models in a series, or to a newer model, as long as they both supported the same mdev view.
hi Dave
themigration_versionstring is transparent to userspace, and is completely defined by vendor driver.
I put it there just as an example of how vendor driver may implement it. e.g.
the srcmigration_versionstring is "src PCIID + src software version", then when this string is write to targetmigration_versionnode, the vendor driver in the target device will compare it with its own device info and software version.
If different models are allowed, the write just succeeds even PCIIDs in src and target are different.so, it is the vendor driver to define whether two devices are able to migrate, no matter their PCIIDs, mdev types, software versions..., which provides vendor driver full flexibility.
Quoted 9 lines
Quoted 1 line
do you think it's good?
Yeh that's OK; I guess it's going to need to have a big table in their with all the PCIIDs in.
The alternative would be to abstract it a little; e.g. to say it's an Intel-gpu-core-v4 and then it would be less worried about the exact clock speed etc - but yes you might be right htat PCIIDs might be best for checking for quirks.glad that you are agreed with it:)
I think the vendor driver still can choose a way to abstract a little (e.g. Intel-gpu-core-v4...) if they think it's better. In that case, themigration_stringwould be something like "Intel-gpu-core-v4 + instance number + software version".
IOW, they can choose anything they think appropriate to identify migration compatibility of a device.
But Alex is right, we have to prevent namespace overlapping. So I think we need to ensure src and target devices are from the same vendors. or, any other ideas?
Quoted 9 lines
Quoted 5 lines
Quoted 1 line
That's why I kept the 'Intel' in that example; or PCI vendor ID; I was
Yes, it's a good idea!
could we add a line in the doc saying that
it is the vendor driver to add a unique string to avoid namespace collision?So why don't we split the difference; lets say that it should start with the hex PCI Vendor ID.
The problem is for mdev devices, if the parent devices are not PCI devices, they don't have PCI vendor IDs.
Thanks
Yan
Quoted 131 lines
Quoted 7 lines
Quoted 2 lines
only really trying to say that within one vendors range there are often a lot of PCI-IDs that have really minor variations.
Yes. I also prefer to include PCI-IDs.
BTW, sometimes even the same PCI-ID does not guarantee two devices are of no difference or are migration compatible. for example, two local NVMe devices may have the same PCI-ID but are configured to two different remote NVMe devices. the vendor driver needs to add extra info besides PCI-IDs then.Ah, yes that's an interesting example.
Dave
Quoted 108 lines
Quoted 108 lines
Quoted 108 lines
Quoted 108 lines
Quoted 108 lines
Quoted 107 lines
Quoted 99 lines
Quoted 99 lines
Quoted 99 lines
Quoted 7 lines
Quoted 8 lines
I agree that there was a gap in the previous proposal for non-mdev devices, but I think this bring a lot of questions that we need to puzzle through and libvirt will need to re-evaluate how they might decide to pick a migration target device. For example, I'm sure libvirt would reject any policy decisions regarding picking a physical device versus an mdev device. Had we previously left it that only a layer above libvirt would select a target device and libvirt only tests compatibility to that target device?
I'm not sure if there's a layer above libvirt would select a target device. but if there is such a layer (even it's human), we need to provide an interface for them to know whether their decision is suitable for migration. The
migration_versioninterface provides a potential to allowmdev->physmigration, even libvirt may currently reject it.Quoted 4 lines
We also need to consider that this expands the namespace. If we no longer require matching types as the first level of comparison, then vendor migration strings can theoretically collide. How do we coordinate that can't happen? Thanks,
yes, it's indeed a problem.
could only allowing migration beteen devices from the same vendor be a good
prerequisite?Thanks
YanQuoted 6 lines
Quoted 6 lines
Quoted 6 lines
Is existence (and compatibility) of (1) a pre-req for possible
existence (and compatibility) of (2)?no. (2) does not reply on (1).
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Hm. Non-existence of (1) seems to imply "this type does not support
migration". If an mdev created for such a type suddenly does support
migration, it feels a bit odd.yes. but I think if the condition happens, it should be reported a bug to vendor driver.
should I add a line in the doc like "vendor driver should ensure that the migration compatibility frommigration_versionundermdev_typeshouldbe
Quoted 5 lines
Quoted 5 lines
consistent with that from
migration_versionunder device node" ?Quoted 3 lines
(It obviously cannot be a prereq for what I called (3) above.)
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Does userspace need to check (1) or can it completely rely on (2), if
it so chooses?I think it can completely reply on (2) if compatibility check before
mdev creation is not required.If devices with a different mdev type are indeed compatible, it
seems
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
userspace can only find out after the devices have actually been
created, as (1) does not apply?
yes, I think so.How useful would it be for userspace to even look at (1) in that case?
It only knows if things have a chance of working if it actually goes
ahead and creates devices.Quoted 7 lines
Quoted 7 lines
hmm, is it useful for userspace to test the
migration_versionunder mdev type before it knows what mdev device to generate ?
like when the userspace wants to migrate an mdev device in src vm, but it has not created target vm and the target mdev device.Quoted 2 lines
One of my worries is that the existence of an attribute with the
same
Quoted 22 lines
Quoted 21 lines
Quoted 11 lines
name in two similar locations might lead to confusion. But maybe it
isn't a problem.Yes, I have the same feeling. but as (2) is for sysfs interface
consistency, to make it transparent to userspace tools like libvirt,
I guess the same name is necessary?What do we actually need here, I wonder? (1) and (2) seem to serve
slightly different purposes, while (2) and what I called (3) have the
same purpose. Is it important to userspace that (1) and (2) have the
same name?so change (1) to
migration_type_versionand (2) tomigration_instance_version?
But as they are under different locations, could that location imply enough information?Thanks
YanQuoted 5 lines
Quoted 4 lines
Quoted 4 lines
_______________________________________________
intel-gvt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gvt-dev--
Dr. David Alan Gilbert / [email protected] / Manchester, UKQuoted 8 lines
Quoted 7 lines
Quoted 4 lines
Quoted 3 lines
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK--
Dr. David Alan Gilbert / [email protected] / Manchester, UK--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 192 lines · * Yan Zhao ([email protected]) wrote:
Quoted 191 lines · Dr. David Alan Gilbert
Quoted 189 lines · * Yan Zhao ([email protected]) wrote:
Quoted 183 lines · Dr. David Alan Gilbert
Quoted 171 lines · * Yan Zhao ([email protected]) wrote:
Quoted 161 lines · Dr. David Alan Gilbert
Quoted 160 lines · * Yan Zhao ([email protected]) wrote:
Quoted 138 lines · Dr. David Alan Gilbert
Quoted 127 lines · * Yan Zhao ([email protected]) wrote:
Quoted 89 lines · Kevin
Quoted 83 lines
From: Yan Zhao
Sent: Tuesday, April 21, 2020 10:37 AMQuoted 4 lines · Alex Williamson
Quoted 1 line · On Sun, 19 Apr 2020 21:24:57 -0400 Yan Zhao <[email protected]> wrote:
On Fri, Apr 17, 2020 at 07:24:57PM +0800, Cornelia Huck wrote:
Quoted 8 lines
Quoted 8 lines
On Fri, 17 Apr 2020 05:52:02 -0400
Yan Zhao <[email protected]> wrote:On Fri, Apr 17, 2020 at 04:44:50PM +0800, Cornelia Huck wrote:
On Mon, 13 Apr 2020 01:52:01 -0400
Yan Zhao <[email protected]> wrote:This patchset introduces a migration_version attribute under sysfs
of VFIO
Quoted 3 lines
Quoted 3 lines
Mediated devices.
This migration_version attribute is used to check migration
compatibility
Quoted 5 lines
Quoted 5 lines
between two mdev devices.
Currently, it has two locations:
(1) under mdev_type node,
which can be used even before device creation, but only formdev
Quoted 3 lines
Quoted 3 lines
devices of the same mdev type.
(2) under mdev device node,
which can only be used after the mdev devices are created, butthe src
Quoted 1 line
Quoted 1 line
and target mdev devices are not necessarily be of the same
mdev type
Quoted 1 line
Quoted 1 line
(The second location is newly added in v5, in order to keep
consistent
Quoted 1 line
Quoted 1 line
with the migration_version node for migratable pass-though
devices)
Quoted 4 lines
Quoted 4 lines
What is the relationship between those two attributes?
(1) is for mdev devices specifically, and (2) is provided to keep the
same
Quoted 1 line
Quoted 1 line
sysfs interface as with non-mdev cases. so (2) is for both mdev
devices and
Quoted 17 lines
Quoted 16 lines
non-mdev devices.
in future, if we enable vfio-pci vendor ops, (i.e. a non-mdev device
is binding to vfio-pci, but is able to register migration region and do
migration transactions from a vendor provided affiliate driver),
the vendor driver would export (2) directly, under device node.
It is not able to provide (1) as there're no mdev devices involved.Ok, creating an alternate attribute for non-mdev devices makes sense.
However, wouldn't that rather be a case (3)? The change here only
refers to mdev devices.as you pointed below, (3) and (2) serve the same purpose.
and I think a possible usage is to migrate between a non-mdev device and
an mdev device. so I think it's better for them both to use (2) rather
than creating (3).Quoted 8 lines
An mdev type is meant to define a software compatible interface, so in the case of
mdev->mdevmigration, doesn't migrating to a different type fail the most basic of compatibility tests that we expect userspace to perform? IOW, if two mdev types are migration compatible, it seems a prerequisite to that is that they provide the same software interface, which means they should be the same mdev type.In the hybrid cases of
mdev->physorphys->mdev, how does amanagement
Quoted 5 lines
tool begin to even guess what might be compatible? Are we expecting libvirt to probe ever device with this attribute in the system? Is there going to be a new class hierarchy created to enumerate all possible migrate-able devices?
yes, management tool needs to guess and test migration compatible between two devices. But I think it's not the problem only for
mdev->physorphys->mdev. even formdev->mdev, management tool needs to
first assume that the two mdevs have the same type of parent devices (e.g.their pciids are equal). otherwise, it's still enumerating possibilities.Quoted 5 lines
on the other hand, for two mdevs,
mdev1 from pdev1, itsmdev_typeis 1/2 of pdev1;
mdev2 from pdev2, itsmdev_typeis 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between mdev1 <-> mdev2.Quoted 3 lines
How could the manage tool figure out that 1/2 of pdev1 is equivalent to 1/4 of pdev2? If we really want to allow such thing happen, the best choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this
migration_versioninterface. the management tool can take advantage of this interface to know if two devices are migration compatible, no matter they are mdevs, non-mdevs, or mix.as I know, (please correct me if not right), current libvirt still requires manually generating mdev devices, and it just duplicates src vm configuration to the target vm.
for libvirt, currently it's alwaysphys->physandmdev->mdev(and of the same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise, why do we need to introduce thismigration_versioninterface and leave the judgement of migration compatibility to vendor driver? why not simply set the criteria to something like "pciids of parent devices are equal, and mdev types are equal" ?Quoted 1 line
btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?
I think it just needs to read src
migration_versionunder src dev node, and test it in target migration version under target dev node.after all, through this interface we just help the upper layer knowing available options through reading and testing, and they decide to use it or not.
Quoted 7 lines
Can we simplify the requirement by allowing only mdev<->mdev and phys<->phys migration? If an customer does want to migrate between a mdev and phys, he could wrap physical device into a wrapped mdev instance (with the same type as the source mdev) instead of using vendor ops. Doing so does add some burden but if mdev<->phys is not dominant usage then such tradeoff might be worthywhile...
Quoted 9 lines
If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's easy for vendor driver to tell if a phys device is migration compatible to a mdev device according it supports it or not.Quoted 5 lines
It surprises me that the PCIID matching is a requirement; I'd assumed with this clever mdev name setup that you could migrate between two different models in a series, or to a newer model, as long as they both supported the same mdev view.
hi Dave
themigration_versionstring is transparent to userspace, and is completely defined by vendor driver.
I put it there just as an example of how vendor driver may implement it. e.g.
the srcmigration_versionstring is "src PCIID + src software version", then when this string is write to targetmigration_versionnode, the vendor driver in the target device will compare it with its own device info and software version.
If different models are allowed, the write just succeeds even PCIIDs in src and target are different.so, it is the vendor driver to define whether two devices are able to migrate, no matter their PCIIDs, mdev types, software versions..., which provides vendor driver full flexibility.
Quoted 9 lines
Quoted 1 line
do you think it's good?
Yeh that's OK; I guess it's going to need to have a big table in their with all the PCIIDs in.
The alternative would be to abstract it a little; e.g. to say it's an Intel-gpu-core-v4 and then it would be less worried about the exact clock speed etc - but yes you might be right htat PCIIDs might be best for checking for quirks.Quoted 10 lines
glad that you are agreed with it:)
I think the vendor driver still can choose a way to abstract a little (e.g. Intel-gpu-core-v4...) if they think it's better. In that case, themigration_stringwould be something like "Intel-gpu-core-v4 + instance number + software version".
IOW, they can choose anything they think appropriate to identify migration compatibility of a device.
But Alex is right, we have to prevent namespace overlapping. So I think we need to ensure src and target devices are from the same vendors. or, any other ideas?Quoted 1 line
That's why I kept the 'Intel' in that example; or PCI vendor ID; I was
Yes, it's a good idea!
could we add a line in the doc saying that
it is the vendor driver to add a unique string to avoid namespace collision?
Quoted 5 lines
Quoted 3 lines
So why don't we split the difference; lets say that it should start with the hex PCI Vendor ID.
The problem is for mdev devices, if the parent devices are not PCI devices, they don't have PCI vendor IDs.
Hmm it would be best not to invent a whole new way of giving unique idenitifiers for vendors if we can.
Dave
Quoted 136 lines
Thanks
YanQuoted 131 lines
Quoted 7 lines
Quoted 2 lines
only really trying to say that within one vendors range there are often a lot of PCI-IDs that have really minor variations.
Yes. I also prefer to include PCI-IDs.
BTW, sometimes even the same PCI-ID does not guarantee two devices are of no difference or are migration compatible. for example, two local NVMe devices may have the same PCI-ID but are configured to two different remote NVMe devices. the vendor driver needs to add extra info besides PCI-IDs then.Ah, yes that's an interesting example.
Dave
Quoted 108 lines
Quoted 108 lines
Quoted 108 lines
Quoted 108 lines
Quoted 108 lines
Quoted 107 lines
Quoted 99 lines
Quoted 99 lines
Quoted 99 lines
Quoted 7 lines
Quoted 8 lines
I agree that there was a gap in the previous proposal for non-mdev devices, but I think this bring a lot of questions that we need to puzzle through and libvirt will need to re-evaluate how they might decide to pick a migration target device. For example, I'm sure libvirt would reject any policy decisions regarding picking a physical device versus an mdev device. Had we previously left it that only a layer above libvirt would select a target device and libvirt only tests compatibility to that target device?
I'm not sure if there's a layer above libvirt would select a target device. but if there is such a layer (even it's human), we need to provide an interface for them to know whether their decision is suitable for migration. The
migration_versioninterface provides a potential to allowmdev->physmigration, even libvirt may currently reject it.Quoted 4 lines
We also need to consider that this expands the namespace. If we no longer require matching types as the first level of comparison, then vendor migration strings can theoretically collide. How do we coordinate that can't happen? Thanks,
yes, it's indeed a problem.
could only allowing migration beteen devices from the same vendor be a good
prerequisite?Thanks
YanQuoted 6 lines
Quoted 6 lines
Is existence (and compatibility) of (1) a pre-req for possible
existence (and compatibility) of (2)?no. (2) does not reply on (1).
Quoted 8 lines
Quoted 8 lines
Hm. Non-existence of (1) seems to imply "this type does not support
migration". If an mdev created for such a type suddenly does support
migration, it feels a bit odd.yes. but I think if the condition happens, it should be reported a bug
to vendor driver.
should I add a line in the doc like "vendor driver should ensure that the
migration compatibility from migration_version under mdev_type shouldbe
Quoted 5 lines
Quoted 5 lines
consistent with that from migration_version under device node" ?
(It obviously cannot be a prereq for what I called (3) above.)
Quoted 7 lines
Quoted 7 lines
Does userspace need to check (1) or can it completely rely on (2), if
it so chooses?I think it can completely reply on (2) if compatibility check before
mdev creation is not required.If devices with a different mdev type are indeed compatible, it
seems
Quoted 8 lines
Quoted 8 lines
userspace can only find out after the devices have actually been
created, as (1) does not apply?
yes, I think so.How useful would it be for userspace to even look at (1) in that case?
It only knows if things have a chance of working if it actually goes
ahead and creates devices.Quoted 7 lines
Quoted 7 lines
hmm, is it useful for userspace to test the migration_version under mdev
type before it knows what mdev device to generate ?
like when the userspace wants to migrate an mdev device in src vm,
but it has not created target vm and the target mdev device.One of my worries is that the existence of an attribute with the
same
Quoted 22 lines
Quoted 21 lines
name in two similar locations might lead to confusion. But maybe it
isn't a problem.Yes, I have the same feeling. but as (2) is for sysfs interface
consistency, to make it transparent to userspace tools like libvirt,
I guess the same name is necessary?What do we actually need here, I wonder? (1) and (2) seem to serve
slightly different purposes, while (2) and what I called (3) have the
same purpose. Is it important to userspace that (1) and (2) have the
same name?
so change (1) to migration_type_version and (2) to
migration_instance_version?
But as they are under different locations, could that location imply
enough information?Thanks
YanQuoted 5 lines
Quoted 4 lines
Quoted 4 lines
_______________________________________________
intel-gvt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gvt-dev--
Dr. David Alan Gilbert / [email protected] / Manchester, UKQuoted 8 lines
Quoted 7 lines
Quoted 4 lines
Quoted 3 lines
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK--
Dr. David Alan Gilbert / [email protected] / Manchester, UK--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
On Wed, Apr 29, 2020 at 05:48:44PM +0800, Dr. David Alan Gilbert wrote:
<snip>
Quoted 122 lines
Quoted 122 lines
Quoted 122 lines
Quoted 121 lines
Quoted 116 lines
Quoted 105 lines
Quoted 96 lines
Quoted 96 lines
Quoted 75 lines
Quoted 65 lines
Quoted 28 lines
Quoted 22 lines
Quoted 8 lines
An mdev type is meant to define a software compatible interface, so in
the case of mdev->mdev migration, doesn't migrating to a different type
fail the most basic of compatibility tests that we expect userspace to
perform? IOW, if two mdev types are migration compatible, it seems a
prerequisite to that is that they provide the same software interface,
which means they should be the same mdev type.In the hybrid cases of mdev->phys or phys->mdev, how does a
management
Quoted 5 lines
tool begin to even guess what might be compatible? Are we expecting
libvirt to probe ever device with this attribute in the system? Is
there going to be a new class hierarchy created to enumerate all
possible migrate-able devices?yes, management tool needs to guess and test migration compatible between two devices. But I think it's not the problem only for
mdev->physorphys->mdev. even formdev->mdev, management tool needs to
first assume that the two mdevs have the same type of parent devices (e.g.their pciids are equal). otherwise, it's still enumerating possibilities.Quoted 5 lines
on the other hand, for two mdevs,
mdev1 from pdev1, itsmdev_typeis 1/2 of pdev1;
mdev2 from pdev2, itsmdev_typeis 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between mdev1 <-> mdev2.Quoted 3 lines
How could the manage tool figure out that 1/2 of pdev1 is equivalent to 1/4 of pdev2? If we really want to allow such thing happen, the best choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this
migration_versioninterface. the management tool can take advantage of this interface to know if two devices are migration compatible, no matter they are mdevs, non-mdevs, or mix.as I know, (please correct me if not right), current libvirt still requires manually generating mdev devices, and it just duplicates src vm configuration to the target vm.
for libvirt, currently it's alwaysphys->physandmdev->mdev(and of the same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise, why do we need to introduce thismigration_versioninterface and leave the judgement of migration compatibility to vendor driver? why not simply set the criteria to something like "pciids of parent devices are equal, and mdev types are equal" ?Quoted 1 line
btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?
I think it just needs to read src
migration_versionunder src dev node, and test it in target migration version under target dev node.after all, through this interface we just help the upper layer knowing available options through reading and testing, and they decide to use it or not.
Quoted 7 lines
Can we simplify the requirement by allowing only mdev<->mdev and phys<->phys migration? If an customer does want to migrate between a mdev and phys, he could wrap physical device into a wrapped mdev instance (with the same type as the source mdev) instead of using vendor ops. Doing so does add some burden but if mdev<->phys is not dominant usage then such tradeoff might be worthywhile...
Quoted 9 lines
If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's easy for vendor driver to tell if a phys device is migration compatible to a mdev device according it supports it or not.Quoted 5 lines
It surprises me that the PCIID matching is a requirement; I'd assumed with this clever mdev name setup that you could migrate between two different models in a series, or to a newer model, as long as they both supported the same mdev view.
hi Dave
themigration_versionstring is transparent to userspace, and is completely defined by vendor driver.
I put it there just as an example of how vendor driver may implement it. e.g.
the srcmigration_versionstring is "src PCIID + src software version", then when this string is write to targetmigration_versionnode, the vendor driver in the target device will compare it with its own device info and software version.
If different models are allowed, the write just succeeds even PCIIDs in src and target are different.so, it is the vendor driver to define whether two devices are able to migrate, no matter their PCIIDs, mdev types, software versions..., which provides vendor driver full flexibility.
Quoted 9 lines
Quoted 1 line
do you think it's good?
Yeh that's OK; I guess it's going to need to have a big table in their with all the PCIIDs in.
The alternative would be to abstract it a little; e.g. to say it's an Intel-gpu-core-v4 and then it would be less worried about the exact clock speed etc - but yes you might be right htat PCIIDs might be best for checking for quirks.Quoted 10 lines
glad that you are agreed with it:)
I think the vendor driver still can choose a way to abstract a little (e.g. Intel-gpu-core-v4...) if they think it's better. In that case, themigration_stringwould be something like "Intel-gpu-core-v4 + instance number + software version".
IOW, they can choose anything they think appropriate to identify migration compatibility of a device.
But Alex is right, we have to prevent namespace overlapping. So I think we need to ensure src and target devices are from the same vendors. or, any other ideas?Quoted 1 line
That's why I kept the 'Intel' in that example; or PCI vendor ID; I was
Yes, it's a good idea!
could we add a line in the doc saying that
it is the vendor driver to add a unique string to avoid namespace collision?
Quoted 9 lines
Quoted 5 lines
Quoted 3 lines
So why don't we split the difference; lets say that it should start with the hex PCI Vendor ID.
The problem is for mdev devices, if the parent devices are not PCI devices, they don't have PCI vendor IDs.
Hmm it would be best not to invent a whole new way of giving unique idenitifiers for vendors if we can.
what about leveraging the flags in vfio device info ?
#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ #define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ #define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2) /* vfio-platform device */ #define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */ #define VFIO_DEVICE_FLAGS_CCW (1 << 4) /* vfio-ccw device */ #define VFIO_DEVICE_FLAGS_AP (1 << 5) /* vfio-ap device */
Then for migration_version string,
The first 64 bits are for device type, the second 64 bits are for device id. e.g.
for PCI devices, it could beVFIO_DEVICE_FLAGS_PCI + PCI ID.
Currently in the doc, we only define PCI devices to use PCI ID as the second 64 bits. In future, if other types of devices want to support migration, they can define their own parts of device id. e.g. use ACPI ID as the second 64-bit...
sounds good?
Thanks
Yan
Quoted 48 lines
Quoted 48 lines
Quoted 48 lines
Quoted 9 lines
Quoted 4 lines
only really trying to say that within one vendors range there are often a lot of PCI-IDs that have really minor variations.
Yes. I also prefer to include PCI-IDs.
BTW, sometimes even the same PCI-ID does not guarantee two devices are of no difference or are migration compatible. for example, two local NVMe devices may have the same PCI-ID but are configured to two different remote NVMe devices. the vendor driver needs to add extra info besides PCI-IDs then.Ah, yes that's an interesting example.
Dave
Quoted 34 lines
Quoted 34 lines
Quoted 34 lines
Quoted 34 lines
Quoted 34 lines
Quoted 34 lines
Quoted 34 lines
Quoted 34 lines
Quoted 34 lines
Quoted 15 lines
I agree that there was a gap in the previous proposal for non-mdev
devices, but I think this bring a lot of questions that we need to
puzzle through and libvirt will need to re-evaluate how they might
decide to pick a migration target device. For example, I'm sure
libvirt would reject any policy decisions regarding picking a physical
device versus an mdev device. Had we previously left it that only a
layer above libvirt would select a target device and libvirt only tests
compatibility to that target device?I'm not sure if there's a layer above libvirt would select a target device. but if there is such a layer (even it's human), we need to provide an interface for them to know whether their decision is suitable for migration. The
migration_versioninterface provides a potential to allowmdev->physmigration, even libvirt may currently reject it.Quoted 4 lines
We also need to consider that this expands the namespace. If we no
longer require matching types as the first level of comparison, then
vendor migration strings can theoretically collide. How do we
coordinate that can't happen? Thanks,yes, it's indeed a problem.
could only allowing migration beteen devices from the same vendor be a good
prerequisite?Thanks
YanQuoted 1 line
<snip>
Quoted 148 lines · On Wed, 29 Apr 2020 20:39:50 -0400 Yan Zhao <[email protected]> wrote:
On Wed, Apr 29, 2020 at 05:48:44PM +0800, Dr. David Alan Gilbert wrote:
<snip>Quoted 122 lines
Quoted 122 lines
Quoted 122 lines
Quoted 121 lines
Quoted 116 lines
Quoted 105 lines
Quoted 96 lines
Quoted 96 lines
Quoted 75 lines
Quoted 65 lines
Quoted 28 lines
Quoted 27 lines
An mdev type is meant to define a software compatible interface, so in
the case of mdev->mdev migration, doesn't migrating to a different type
fail the most basic of compatibility tests that we expect userspace to
perform? IOW, if two mdev types are migration compatible, it seems a
prerequisite to that is that they provide the same software interface,
which means they should be the same mdev type.In the hybrid cases of mdev->phys or phys->mdev, how does a
management
tool begin to even guess what might be compatible? Are we expecting
libvirt to probe ever device with this attribute in the system? Is
there going to be a new class hierarchy created to enumerate all
possible migrate-able devices?yes, management tool needs to guess and test migration compatible
between two devices. But I think it's not the problem only for
mdev->phys or phys->mdev. even for mdev->mdev, management tool needs
to
first assume that the two mdevs have the same type of parent devices
(e.g.their pciids are equal). otherwise, it's still enumerating
possibilities.on the other hand, for two mdevs,
mdev1 from pdev1, its mdev_type is 1/2 of pdev1;
mdev2 from pdev2, its mdev_type is 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between
mdev1 <-> mdev2.Quoted 3 lines
How could the manage tool figure out that 1/2 of pdev1 is equivalent to 1/4 of pdev2? If we really want to allow such thing happen, the best choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this
migration_versioninterface. the management tool can take advantage of this interface to know if two devices are migration compatible, no matter they are mdevs, non-mdevs, or mix.as I know, (please correct me if not right), current libvirt still requires manually generating mdev devices, and it just duplicates src vm configuration to the target vm.
for libvirt, currently it's alwaysphys->physandmdev->mdev(and of the same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise, why do we need to introduce thismigration_versioninterface and leave the judgement of migration compatibility to vendor driver? why not simply set the criteria to something like "pciids of parent devices are equal, and mdev types are equal" ?Quoted 1 line
btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?
I think it just needs to read src
migration_versionunder src dev node, and test it in target migration version under target dev node.after all, through this interface we just help the upper layer knowing available options through reading and testing, and they decide to use it or not.
Quoted 7 lines
Can we simplify the requirement by allowing only mdev<->mdev and phys<->phys migration? If an customer does want to migrate between a mdev and phys, he could wrap physical device into a wrapped mdev instance (with the same type as the source mdev) instead of using vendor ops. Doing so does add some burden but if mdev<->phys is not dominant usage then such tradeoff might be worthywhile...
Quoted 9 lines
If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's easy for vendor driver to tell if a phys device is migration compatible to a mdev device according it supports it or not.Quoted 5 lines
It surprises me that the PCIID matching is a requirement; I'd assumed with this clever mdev name setup that you could migrate between two different models in a series, or to a newer model, as long as they both supported the same mdev view.
hi Dave
themigration_versionstring is transparent to userspace, and is completely defined by vendor driver.
I put it there just as an example of how vendor driver may implement it. e.g.
the srcmigration_versionstring is "src PCIID + src software version", then when this string is write to targetmigration_versionnode, the vendor driver in the target device will compare it with its own device info and software version.
If different models are allowed, the write just succeeds even PCIIDs in src and target are different.so, it is the vendor driver to define whether two devices are able to migrate, no matter their PCIIDs, mdev types, software versions..., which provides vendor driver full flexibility.
Quoted 9 lines
Quoted 1 line
do you think it's good?
Yeh that's OK; I guess it's going to need to have a big table in their with all the PCIIDs in.
The alternative would be to abstract it a little; e.g. to say it's an Intel-gpu-core-v4 and then it would be less worried about the exact clock speed etc - but yes you might be right htat PCIIDs might be best for checking for quirks.Quoted 10 lines
glad that you are agreed with it:)
I think the vendor driver still can choose a way to abstract a little (e.g. Intel-gpu-core-v4...) if they think it's better. In that case, themigration_stringwould be something like "Intel-gpu-core-v4 + instance number + software version".
IOW, they can choose anything they think appropriate to identify migration compatibility of a device.
But Alex is right, we have to prevent namespace overlapping. So I think we need to ensure src and target devices are from the same vendors. or, any other ideas?Quoted 1 line
That's why I kept the 'Intel' in that example; or PCI vendor ID; I was
Yes, it's a good idea!
could we add a line in the doc saying that
it is the vendor driver to add a unique string to avoid namespace collision?Quoted 9 lines
Quoted 5 lines
Quoted 3 lines
So why don't we split the difference; lets say that it should start with the hex PCI Vendor ID.
The problem is for mdev devices, if the parent devices are not PCI devices, they don't have PCI vendor IDs.
Hmm it would be best not to invent a whole new way of giving unique idenitifiers for vendors if we can.
what about leveraging the flags in vfio device info ?
#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ #define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ #define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2) /* vfio-platform device */ #define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */ #define VFIO_DEVICE_FLAGS_CCW (1 << 4) /* vfio-ccw device */ #define VFIO_DEVICE_FLAGS_AP (1 << 5) /* vfio-ap device */Then for
migration_versionstring,
The first 64 bits are for device type, the second 64 bits are for device id. e.g.
for PCI devices, it could beVFIO_DEVICE_FLAGS_PCI+ PCI ID.
Quoted 6 lines
Currently in the doc, we only define PCI devices to use PCI ID as the second 64 bits. In future, if other types of devices want to support migration, they can define their own parts of device id. e.g. use ACPI ID as the second 64-bit...
sounds good?
[dead thread resurrection alert]
Not really. We're deep into territory that we were trying to avoid. We had previously defined the version string as opaque (not transparent) specifically because we did not want userspace to make assumptions about compatibility based on the content of the string. It was 100% left to the vendor driver to determine compatibility. The mdev type was the full extent of the first level filter that userspace could use to narrow the set of potentially compatible devices. If we remove that due to physical device migration support, I'm not sure how we simplify the problem for userspace.
We need to step away from PCI IDs and parent devices. We're not designing a solution that only works for PCI, there's no guarantee that parent devices are similar or even from the same vendor.
Does the mdev type sufficiently solve the problem for mdev devices? If so, then what can we learn from it and how can we apply an equivalence to physical devices? For example, should a vfio bus driver (vfio-pci or vfio-mdev) expose vfio_migration_type and vfio_migration_version attributes under the device in sysfs where the _type provides the first level, user transparent, matching string (ex. mdev type for mdev devices) while the _version provides the user opaque, vendor known compatibility test?
This pushes the problem out to the drivers where we can perhaps incorporate the module name to avoid collisions. For example Yan's vendor extension proposal makes use of vfio-pci with extension modules loaded via an alias incorporating the PCI vendor and device ID. So vfio-pci might use a type of "vfio-pci:$ALIAS".
It's still a bit messy that someone needs to go evaluate all these types between devices that exist and mdev devices that might exist if created, but I don't have any good ideas to resolve that (maybe a new class hierarchy?). Thanks,
Alex
Quoted 189 lines · Alex Williamson
Quoted 148 lines · On Wed, 29 Apr 2020 20:39:50 -0400 Yan Zhao <[email protected]> wrote:
On Wed, Apr 29, 2020 at 05:48:44PM +0800, Dr. David Alan Gilbert wrote:
<snip>Quoted 122 lines
Quoted 122 lines
Quoted 122 lines
Quoted 121 lines
Quoted 116 lines
Quoted 105 lines
Quoted 96 lines
Quoted 96 lines
Quoted 75 lines
Quoted 65 lines
Quoted 31 lines
An mdev type is meant to define a software compatible interface, so in
the case of mdev->mdev migration, doesn't migrating to a different type
fail the most basic of compatibility tests that we expect userspace to
perform? IOW, if two mdev types are migration compatible, it seems a
prerequisite to that is that they provide the same software interface,
which means they should be the same mdev type.In the hybrid cases of mdev->phys or phys->mdev, how does a
management
tool begin to even guess what might be compatible? Are we expecting
libvirt to probe ever device with this attribute in the system? Is
there going to be a new class hierarchy created to enumerate all
possible migrate-able devices?yes, management tool needs to guess and test migration compatible
between two devices. But I think it's not the problem only for
mdev->phys or phys->mdev. even for mdev->mdev, management tool needs
to
first assume that the two mdevs have the same type of parent devices
(e.g.their pciids are equal). otherwise, it's still enumerating
possibilities.on the other hand, for two mdevs,
mdev1 from pdev1, its mdev_type is 1/2 of pdev1;
mdev2 from pdev2, its mdev_type is 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between
mdev1 <-> mdev2.How could the manage tool figure out that 1/2 of pdev1 is equivalent
to 1/4 of pdev2? If we really want to allow such thing happen, the best
choice is to report the same mdev type on both pdev1 and pdev2.I think that's exactly the value of this
migration_versioninterface. the management tool can take advantage of this interface to know if two devices are migration compatible, no matter they are mdevs, non-mdevs, or mix.as I know, (please correct me if not right), current libvirt still requires manually generating mdev devices, and it just duplicates src vm configuration to the target vm.
for libvirt, currently it's alwaysphys->physandmdev->mdev(and of the same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise, why do we need to introduce thismigration_versioninterface and leave the judgement of migration compatibility to vendor driver? why not simply set the criteria to something like "pciids of parent devices are equal, and mdev types are equal" ?Quoted 1 line
btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?
I think it just needs to read src
migration_versionunder src dev node, and test it in target migration version under target dev node.after all, through this interface we just help the upper layer knowing available options through reading and testing, and they decide to use it or not.
Quoted 7 lines
Can we simplify the requirement by allowing only mdev<->mdev and
phys<->phys migration? If an customer does want to migrate between a
mdev and phys, he could wrap physical device into a wrapped mdev
instance (with the same type as the source mdev) instead of using vendor
ops. Doing so does add some burden but if mdev<->phys is not dominant
usage then such tradeoff might be worthywhile...Quoted 9 lines
If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's easy for vendor driver to tell if a phys device is migration compatible to a mdev device according it supports it or not.Quoted 5 lines
It surprises me that the PCIID matching is a requirement; I'd assumed with this clever mdev name setup that you could migrate between two different models in a series, or to a newer model, as long as they both supported the same mdev view.
hi Dave
themigration_versionstring is transparent to userspace, and is completely defined by vendor driver.
I put it there just as an example of how vendor driver may implement it. e.g.
the srcmigration_versionstring is "src PCIID + src software version", then when this string is write to targetmigration_versionnode, the vendor driver in the target device will compare it with its own device info and software version.
If different models are allowed, the write just succeeds even PCIIDs in src and target are different.so, it is the vendor driver to define whether two devices are able to migrate, no matter their PCIIDs, mdev types, software versions..., which provides vendor driver full flexibility.
Quoted 9 lines
Quoted 1 line
do you think it's good?
Yeh that's OK; I guess it's going to need to have a big table in their with all the PCIIDs in.
The alternative would be to abstract it a little; e.g. to say it's an Intel-gpu-core-v4 and then it would be less worried about the exact clock speed etc - but yes you might be right htat PCIIDs might be best for checking for quirks.Quoted 10 lines
glad that you are agreed with it:)
I think the vendor driver still can choose a way to abstract a little (e.g. Intel-gpu-core-v4...) if they think it's better. In that case, themigration_stringwould be something like "Intel-gpu-core-v4 + instance number + software version".
IOW, they can choose anything they think appropriate to identify migration compatibility of a device.
But Alex is right, we have to prevent namespace overlapping. So I think we need to ensure src and target devices are from the same vendors. or, any other ideas?Quoted 1 line
That's why I kept the 'Intel' in that example; or PCI vendor ID; I was
Yes, it's a good idea!
could we add a line in the doc saying that
it is the vendor driver to add a unique string to avoid namespace collision?Quoted 9 lines
Quoted 5 lines
Quoted 3 lines
So why don't we split the difference; lets say that it should start with the hex PCI Vendor ID.
The problem is for mdev devices, if the parent devices are not PCI devices, they don't have PCI vendor IDs.
Hmm it would be best not to invent a whole new way of giving unique idenitifiers for vendors if we can.
what about leveraging the flags in vfio device info ?
#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ #define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ #define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2) /* vfio-platform device */ #define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */ #define VFIO_DEVICE_FLAGS_CCW (1 << 4) /* vfio-ccw device */ #define VFIO_DEVICE_FLAGS_AP (1 << 5) /* vfio-ap device */Then for
migration_versionstring,
The first 64 bits are for device type, the second 64 bits are for device id. e.g.
for PCI devices, it could beVFIO_DEVICE_FLAGS_PCI+ PCI ID.Quoted 6 lines
Currently in the doc, we only define PCI devices to use PCI ID as the second 64 bits. In future, if other types of devices want to support migration, they can define their own parts of device id. e.g. use ACPI ID as the second 64-bit...
sounds good?
[dead thread resurrection alert]
Not really. We're deep into territory that we were trying to avoid. We had previously defined the version string as opaque (not transparent) specifically because we did not want userspace to make assumptions about compatibility based on the content of the string. It was 100% left to the vendor driver to determine compatibility. The mdev type was the full extent of the first level filter that userspace could use to narrow the set of potentially compatible devices. If we remove that due to physical device migration support, I'm not sure how we simplify the problem for userspace.
We need to step away from PCI IDs and parent devices. We're not designing a solution that only works for PCI, there's no guarantee that parent devices are similar or even from the same vendor.
Does the mdev type sufficiently solve the problem for mdev devices? If so, then what can we learn from it and how can we apply an equivalence to physical devices? For example, should a vfio bus driver (vfio-pci or vfio-mdev) expose
vfio_migration_typeandvfio_migration_versionattributes under the device in sysfs where the_typeprovides the first level, user transparent, matching string (ex. mdev type for mdev devices) while the_versionprovides the user opaque, vendor known compatibility test?This pushes the problem out to the drivers where we can perhaps incorporate the module name to avoid collisions. For example Yan's vendor extension proposal makes use of vfio-pci with extension modules loaded via an alias incorporating the PCI vendor and device ID. So vfio-pci might use a type of "vfio-pci:$ALIAS".
Quoted 4 lines
It's still a bit messy that someone needs to go evaluate all these types between devices that exist and mdev devices that might exist if created, but I don't have any good ideas to resolve that (maybe a new class hierarchy?). Thanks,
hi Alex
yes, with the same mdev_type, user still has to enumerate all parent devices and test between the supported mdev_types to know whether two mdev devices are compatible.
maybe this is not a problem? in reality, it is the administrator that specifies two devices and the management tool feedbacks compatibility result. management tool is not required to pre-test and setup the compatibility map beforehand.
If so, then the only problem left is namespace collision. given that the migration_version nodes is exported by vendor driver, maybe it can also embed its module name in the migration version string, like "i915" in "i915-GVTg_V5_8", as you suggested above.
with module name as the first mandatory field in version string and skipping the enumeration/testing problem, we can happyly unify migration across mdev and phys devices. e.g. it is possible to migrate between VFs in sriov and mdevs in siov to achieve backwards compatibility.
Thanks
Yan
Quoted 1 line
Quoted 197 lines · On Tue, 2 Jun 2020 23:19:48 -0400 Yan Zhao <[email protected]> wrote:
Quoted 189 lines · Alex Williamson
Quoted 148 lines · On Wed, 29 Apr 2020 20:39:50 -0400 Yan Zhao <[email protected]> wrote:
On Wed, Apr 29, 2020 at 05:48:44PM +0800, Dr. David Alan Gilbert wrote:
<snip>Quoted 122 lines
Quoted 122 lines
Quoted 122 lines
Quoted 121 lines
Quoted 116 lines
Quoted 105 lines
Quoted 96 lines
Quoted 96 lines
Quoted 75 lines
Quoted 74 lines
An mdev type is meant to define a software compatible interface, so in
the case of mdev->mdev migration, doesn't migrating to a different type
fail the most basic of compatibility tests that we expect userspace to
perform? IOW, if two mdev types are migration compatible, it seems a
prerequisite to that is that they provide the same software interface,
which means they should be the same mdev type.In the hybrid cases of mdev->phys or phys->mdev, how does a
management
tool begin to even guess what might be compatible? Are we expecting
libvirt to probe ever device with this attribute in the system? Is
there going to be a new class hierarchy created to enumerate all
possible migrate-able devices?yes, management tool needs to guess and test migration compatible
between two devices. But I think it's not the problem only for
mdev->phys or phys->mdev. even for mdev->mdev, management tool needs
to
first assume that the two mdevs have the same type of parent devices
(e.g.their pciids are equal). otherwise, it's still enumerating
possibilities.on the other hand, for two mdevs,
mdev1 from pdev1, its mdev_type is 1/2 of pdev1;
mdev2 from pdev2, its mdev_type is 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between
mdev1 <-> mdev2.How could the manage tool figure out that 1/2 of pdev1 is equivalent
to 1/4 of pdev2? If we really want to allow such thing happen, the best
choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this migration_version interface.
the management tool can take advantage of this interface to know if two
devices are migration compatible, no matter they are mdevs, non-mdevs,
or mix.as I know, (please correct me if not right), current libvirt still
requires manually generating mdev devices, and it just duplicates src vm
configuration to the target vm.
for libvirt, currently it's always phys->phys and mdev->mdev (and of the
same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise,
why do we need to introduce this migration_version interface and leave
the judgement of migration compatibility to vendor driver? why not simply
set the criteria to something like "pciids of parent devices are equal,
and mdev types are equal" ?btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?I think it just needs to read src migration_version under src dev node,
and test it in target migration version under target dev node.after all, through this interface we just help the upper layer
knowing available options through reading and testing, and they decide
to use it or not.Can we simplify the requirement by allowing only mdev<->mdev and
phys<->phys migration? If an customer does want to migrate between a
mdev and phys, he could wrap physical device into a wrapped mdev
instance (with the same type as the source mdev) instead of using vendor
ops. Doing so does add some burden but if mdev<->phys is not dominant
usage then such tradeoff might be worthywhile...If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no
difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's
easy for vendor driver to tell if a phys device is migration compatible
to a mdev device according it supports it or not.Quoted 5 lines
It surprises me that the PCIID matching is a requirement; I'd assumed with this clever mdev name setup that you could migrate between two different models in a series, or to a newer model, as long as they both supported the same mdev view.
hi Dave
themigration_versionstring is transparent to userspace, and is completely defined by vendor driver.
I put it there just as an example of how vendor driver may implement it. e.g.
the srcmigration_versionstring is "src PCIID + src software version", then when this string is write to targetmigration_versionnode, the vendor driver in the target device will compare it with its own device info and software version.
If different models are allowed, the write just succeeds even PCIIDs in src and target are different.so, it is the vendor driver to define whether two devices are able to migrate, no matter their PCIIDs, mdev types, software versions..., which provides vendor driver full flexibility.
Quoted 9 lines
Quoted 1 line
do you think it's good?
Yeh that's OK; I guess it's going to need to have a big table in their with all the PCIIDs in.
The alternative would be to abstract it a little; e.g. to say it's an Intel-gpu-core-v4 and then it would be less worried about the exact clock speed etc - but yes you might be right htat PCIIDs might be best for checking for quirks.Quoted 10 lines
glad that you are agreed with it:)
I think the vendor driver still can choose a way to abstract a little (e.g. Intel-gpu-core-v4...) if they think it's better. In that case, themigration_stringwould be something like "Intel-gpu-core-v4 + instance number + software version".
IOW, they can choose anything they think appropriate to identify migration compatibility of a device.
But Alex is right, we have to prevent namespace overlapping. So I think we need to ensure src and target devices are from the same vendors. or, any other ideas?Quoted 1 line
That's why I kept the 'Intel' in that example; or PCI vendor ID; I was
Yes, it's a good idea!
could we add a line in the doc saying that
it is the vendor driver to add a unique string to avoid namespace collision?Quoted 9 lines
Quoted 5 lines
Quoted 3 lines
So why don't we split the difference; lets say that it should start with the hex PCI Vendor ID.
The problem is for mdev devices, if the parent devices are not PCI devices, they don't have PCI vendor IDs.
Hmm it would be best not to invent a whole new way of giving unique idenitifiers for vendors if we can.
what about leveraging the flags in vfio device info ?
#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ #define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ #define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2) /* vfio-platform device */ #define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */ #define VFIO_DEVICE_FLAGS_CCW (1 << 4) /* vfio-ccw device */ #define VFIO_DEVICE_FLAGS_AP (1 << 5) /* vfio-ap device */Then for
migration_versionstring,
The first 64 bits are for device type, the second 64 bits are for device id. e.g.
for PCI devices, it could beVFIO_DEVICE_FLAGS_PCI+ PCI ID.Quoted 6 lines
Currently in the doc, we only define PCI devices to use PCI ID as the second 64 bits. In future, if other types of devices want to support migration, they can define their own parts of device id. e.g. use ACPI ID as the second 64-bit...
sounds good?
[dead thread resurrection alert]
Not really. We're deep into territory that we were trying to avoid. We had previously defined the version string as opaque (not transparent) specifically because we did not want userspace to make assumptions about compatibility based on the content of the string. It was 100% left to the vendor driver to determine compatibility. The mdev type was the full extent of the first level filter that userspace could use to narrow the set of potentially compatible devices. If we remove that due to physical device migration support, I'm not sure how we simplify the problem for userspace.
We need to step away from PCI IDs and parent devices. We're not designing a solution that only works for PCI, there's no guarantee that parent devices are similar or even from the same vendor.
Does the mdev type sufficiently solve the problem for mdev devices? If so, then what can we learn from it and how can we apply an equivalence to physical devices? For example, should a vfio bus driver (vfio-pci or vfio-mdev) expose
vfio_migration_typeandvfio_migration_versionattributes under the device in sysfs where the_typeprovides the first level, user transparent, matching string (ex. mdev type for mdev devices) while the_versionprovides the user opaque, vendor known compatibility test?This pushes the problem out to the drivers where we can perhaps incorporate the module name to avoid collisions. For example Yan's vendor extension proposal makes use of vfio-pci with extension modules loaded via an alias incorporating the PCI vendor and device ID. So vfio-pci might use a type of "vfio-pci:$ALIAS".
Quoted 4 lines
It's still a bit messy that someone needs to go evaluate all these types between devices that exist and mdev devices that might exist if created, but I don't have any good ideas to resolve that (maybe a new class hierarchy?). Thanks,
hi Alex
Quoted 7 lines
yes, with the same
mdev_type, user still has to enumerate all parent devices and test between the supportedmdev_typesto know whether two mdev devices are compatible.
maybe this is not a problem? in reality, it is the administrator that specifies two devices and the management tool feedbacks compatibility result. management tool is not required to pre-test and setup the compatibility map beforehand.
That's exactly the purpose of this interface though is to give the management tools some indication that a migration has a chance of working.
Quoted 4 lines
If so, then the only problem left is namespace collision. given that the
migration_versionnodes is exported by vendor driver, maybe it can also embed its module name in the migration version string, like "i915" in "i915-GVTg_V5_8", as you suggested above.
No, we've already decided that the version string is opaque, the user is not to attempt to infer anything from it. That's why I've suggested another attribute in sysfs that does present type information that a user can compare. Thanks,
Alex
Quoted 12 lines
with module name as the first mandatory field in version string and skipping the enumeration/testing problem, we can happyly unify migration across mdev and phys devices. e.g. it is possible to migrate between VFs in sriov and mdevs in siov to achieve backwards compatibility.
Thanks
YanQuoted 1 line
Quoted 217 lines · Alex Williamson
Quoted 197 lines · On Tue, 2 Jun 2020 23:19:48 -0400 Yan Zhao <[email protected]> wrote:
Quoted 189 lines · Alex Williamson
Quoted 148 lines · On Wed, 29 Apr 2020 20:39:50 -0400 Yan Zhao <[email protected]> wrote:
On Wed, Apr 29, 2020 at 05:48:44PM +0800, Dr. David Alan Gilbert wrote:
<snip>Quoted 122 lines
Quoted 122 lines
Quoted 122 lines
Quoted 121 lines
Quoted 116 lines
Quoted 105 lines
Quoted 96 lines
Quoted 96 lines
Quoted 80 lines
An mdev type is meant to define a software compatible interface, so in
the case of mdev->mdev migration, doesn't migrating to a different type
fail the most basic of compatibility tests that we expect userspace to
perform? IOW, if two mdev types are migration compatible, it seems a
prerequisite to that is that they provide the same software interface,
which means they should be the same mdev type.In the hybrid cases of mdev->phys or phys->mdev, how does a
management
tool begin to even guess what might be compatible? Are we expecting
libvirt to probe ever device with this attribute in the system? Is
there going to be a new class hierarchy created to enumerate all
possible migrate-able devices?yes, management tool needs to guess and test migration compatible
between two devices. But I think it's not the problem only for
mdev->phys or phys->mdev. even for mdev->mdev, management tool needs
to
first assume that the two mdevs have the same type of parent devices
(e.g.their pciids are equal). otherwise, it's still enumerating
possibilities.on the other hand, for two mdevs,
mdev1 from pdev1, its mdev_type is 1/2 of pdev1;
mdev2 from pdev2, its mdev_type is 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between
mdev1 <-> mdev2.How could the manage tool figure out that 1/2 of pdev1 is equivalent
to 1/4 of pdev2? If we really want to allow such thing happen, the best
choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this migration_version interface.
the management tool can take advantage of this interface to know if two
devices are migration compatible, no matter they are mdevs, non-mdevs,
or mix.as I know, (please correct me if not right), current libvirt still
requires manually generating mdev devices, and it just duplicates src vm
configuration to the target vm.
for libvirt, currently it's always phys->phys and mdev->mdev (and of the
same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise,
why do we need to introduce this migration_version interface and leave
the judgement of migration compatibility to vendor driver? why not simply
set the criteria to something like "pciids of parent devices are equal,
and mdev types are equal" ?btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?I think it just needs to read src migration_version under src dev node,
and test it in target migration version under target dev node.after all, through this interface we just help the upper layer
knowing available options through reading and testing, and they decide
to use it or not.Can we simplify the requirement by allowing only mdev<->mdev and
phys<->phys migration? If an customer does want to migrate between a
mdev and phys, he could wrap physical device into a wrapped mdev
instance (with the same type as the source mdev) instead of using vendor
ops. Doing so does add some burden but if mdev<->phys is not dominant
usage then such tradeoff might be worthywhile...If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no
difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's
easy for vendor driver to tell if a phys device is migration compatible
to a mdev device according it supports it or not.It surprises me that the PCIID matching is a requirement; I'd assumed
with this clever mdev name setup that you could migrate between two
different models in a series, or to a newer model, as long as they
both supported the same mdev view.hi Dave
themigration_versionstring is transparent to userspace, and is completely defined by vendor driver.
I put it there just as an example of how vendor driver may implement it. e.g.
the srcmigration_versionstring is "src PCIID + src software version", then when this string is write to targetmigration_versionnode, the vendor driver in the target device will compare it with its own device info and software version.
If different models are allowed, the write just succeeds even PCIIDs in src and target are different.so, it is the vendor driver to define whether two devices are able to migrate, no matter their PCIIDs, mdev types, software versions..., which provides vendor driver full flexibility.
Quoted 9 lines
Quoted 1 line
do you think it's good?
Yeh that's OK; I guess it's going to need to have a big table in their with all the PCIIDs in.
The alternative would be to abstract it a little; e.g. to say it's an Intel-gpu-core-v4 and then it would be less worried about the exact clock speed etc - but yes you might be right htat PCIIDs might be best for checking for quirks.Quoted 10 lines
glad that you are agreed with it:)
I think the vendor driver still can choose a way to abstract a little (e.g. Intel-gpu-core-v4...) if they think it's better. In that case, themigration_stringwould be something like "Intel-gpu-core-v4 + instance number + software version".
IOW, they can choose anything they think appropriate to identify migration compatibility of a device.
But Alex is right, we have to prevent namespace overlapping. So I think we need to ensure src and target devices are from the same vendors. or, any other ideas?Quoted 1 line
That's why I kept the 'Intel' in that example; or PCI vendor ID; I was
Yes, it's a good idea!
could we add a line in the doc saying that
it is the vendor driver to add a unique string to avoid namespace collision?Quoted 9 lines
Quoted 5 lines
Quoted 3 lines
So why don't we split the difference; lets say that it should start with the hex PCI Vendor ID.
The problem is for mdev devices, if the parent devices are not PCI devices, they don't have PCI vendor IDs.
Hmm it would be best not to invent a whole new way of giving unique idenitifiers for vendors if we can.
what about leveraging the flags in vfio device info ?
#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ #define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ #define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2) /* vfio-platform device */ #define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */ #define VFIO_DEVICE_FLAGS_CCW (1 << 4) /* vfio-ccw device */ #define VFIO_DEVICE_FLAGS_AP (1 << 5) /* vfio-ap device */Then for
migration_versionstring,
The first 64 bits are for device type, the second 64 bits are for device id. e.g.
for PCI devices, it could beVFIO_DEVICE_FLAGS_PCI+ PCI ID.Quoted 6 lines
Currently in the doc, we only define PCI devices to use PCI ID as the second 64 bits. In future, if other types of devices want to support migration, they can define their own parts of device id. e.g. use ACPI ID as the second 64-bit...
sounds good?
[dead thread resurrection alert]
Not really. We're deep into territory that we were trying to avoid. We had previously defined the version string as opaque (not transparent) specifically because we did not want userspace to make assumptions about compatibility based on the content of the string. It was 100% left to the vendor driver to determine compatibility. The mdev type was the full extent of the first level filter that userspace could use to narrow the set of potentially compatible devices. If we remove that due to physical device migration support, I'm not sure how we simplify the problem for userspace.
We need to step away from PCI IDs and parent devices. We're not designing a solution that only works for PCI, there's no guarantee that parent devices are similar or even from the same vendor.
Does the mdev type sufficiently solve the problem for mdev devices? If so, then what can we learn from it and how can we apply an equivalence to physical devices? For example, should a vfio bus driver (vfio-pci or vfio-mdev) expose
vfio_migration_typeandvfio_migration_versionattributes under the device in sysfs where the_typeprovides the first level, user transparent, matching string (ex. mdev type for mdev devices) while the_versionprovides the user opaque, vendor known compatibility test?This pushes the problem out to the drivers where we can perhaps incorporate the module name to avoid collisions. For example Yan's vendor extension proposal makes use of vfio-pci with extension modules loaded via an alias incorporating the PCI vendor and device ID. So vfio-pci might use a type of "vfio-pci:$ALIAS".
Quoted 4 lines
It's still a bit messy that someone needs to go evaluate all these types between devices that exist and mdev devices that might exist if created, but I don't have any good ideas to resolve that (maybe a new class hierarchy?). Thanks,
hi Alex
Quoted 7 lines
yes, with the same
mdev_type, user still has to enumerate all parent devices and test between the supportedmdev_typesto know whether two mdev devices are compatible.
maybe this is not a problem? in reality, it is the administrator that specifies two devices and the management tool feedbacks compatibility result. management tool is not required to pre-test and setup the compatibility map beforehand.That's exactly the purpose of this interface though is to give the management tools some indication that a migration has a chance of working.
Quoted 4 lines
If so, then the only problem left is namespace collision. given that the
migration_versionnodes is exported by vendor driver, maybe it can also embed its module name in the migration version string, like "i915" in "i915-GVTg_V5_8", as you suggested above.
Quoted 7 lines
No, we've already decided that the version string is opaque, the user is not to attempt to infer anything from it. That's why I've suggested another attribute in sysfs that does present type information that a user can compare. Thanks,
Alex
ok. got it.
one more thing I want to confirm is that do you think it's a necessary restriction that "The mdev devices are of the same type" ? could mdev and phys devices both expose "vfio_migration_type" and "vfio_migration_version" under device sysfs so that it may not be confined in mdev_type? (e.g. when aggregator is enabled, though two mdevs are of the same mdev_type, they are not actually compatible; and two mdevs are compatible though their mdev_type is not equal.)
for mdev devices, we could still expose vfio_migration_version attribute under mdev_type for detection before mdev generated.
Thanks
Yan
Quoted 13 lines
Quoted 12 lines
with module name as the first mandatory field in version string and skipping the enumeration/testing problem, we can happyly unify migration across mdev and phys devices. e.g. it is possible to migrate between VFs in sriov and mdevs in siov to achieve backwards compatibility.
Thanks
YanQuoted 1 line
Quoted 234 lines · On Wed, 3 Jun 2020 01:24:43 -0400 Yan Zhao <[email protected]> wrote:
Quoted 217 lines · Alex Williamson
Quoted 197 lines · On Tue, 2 Jun 2020 23:19:48 -0400 Yan Zhao <[email protected]> wrote:
Quoted 189 lines · Alex Williamson
Quoted 148 lines · On Wed, 29 Apr 2020 20:39:50 -0400 Yan Zhao <[email protected]> wrote:
On Wed, Apr 29, 2020 at 05:48:44PM +0800, Dr. David Alan Gilbert wrote:
<snip>Quoted 122 lines
Quoted 122 lines
Quoted 122 lines
Quoted 121 lines
Quoted 116 lines
Quoted 105 lines
Quoted 96 lines
Quoted 96 lines
An mdev type is meant to define a software compatible interface, so in
the case of mdev->mdev migration, doesn't migrating to a different type
fail the most basic of compatibility tests that we expect userspace to
perform? IOW, if two mdev types are migration compatible, it seems a
prerequisite to that is that they provide the same software interface,
which means they should be the same mdev type.In the hybrid cases of mdev->phys or phys->mdev, how does a
management
tool begin to even guess what might be compatible? Are we expecting
libvirt to probe ever device with this attribute in the system? Is
there going to be a new class hierarchy created to enumerate all
possible migrate-able devices?yes, management tool needs to guess and test migration compatible
between two devices. But I think it's not the problem only for
mdev->phys or phys->mdev. even for mdev->mdev, management tool needs
to
first assume that the two mdevs have the same type of parent devices
(e.g.their pciids are equal). otherwise, it's still enumerating
possibilities.on the other hand, for two mdevs,
mdev1 from pdev1, its mdev_type is 1/2 of pdev1;
mdev2 from pdev2, its mdev_type is 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between
mdev1 <-> mdev2.How could the manage tool figure out that 1/2 of pdev1 is equivalent
to 1/4 of pdev2? If we really want to allow such thing happen, the best
choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this migration_version interface.
the management tool can take advantage of this interface to know if two
devices are migration compatible, no matter they are mdevs, non-mdevs,
or mix.as I know, (please correct me if not right), current libvirt still
requires manually generating mdev devices, and it just duplicates src vm
configuration to the target vm.
for libvirt, currently it's always phys->phys and mdev->mdev (and of the
same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise,
why do we need to introduce this migration_version interface and leave
the judgement of migration compatibility to vendor driver? why not simply
set the criteria to something like "pciids of parent devices are equal,
and mdev types are equal" ?btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?I think it just needs to read src migration_version under src dev node,
and test it in target migration version under target dev node.after all, through this interface we just help the upper layer
knowing available options through reading and testing, and they decide
to use it or not.Can we simplify the requirement by allowing only mdev<->mdev and
phys<->phys migration? If an customer does want to migrate between a
mdev and phys, he could wrap physical device into a wrapped mdev
instance (with the same type as the source mdev) instead of using vendor
ops. Doing so does add some burden but if mdev<->phys is not dominant
usage then such tradeoff might be worthywhile...If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no
difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's
easy for vendor driver to tell if a phys device is migration compatible
to a mdev device according it supports it or not.It surprises me that the PCIID matching is a requirement; I'd assumed
with this clever mdev name setup that you could migrate between two
different models in a series, or to a newer model, as long as they
both supported the same mdev view.hi Dave
the migration_version string is transparent to userspace, and is
completely defined by vendor driver.
I put it there just as an example of how vendor driver may implement it.
e.g.
the src migration_version string is "src PCIID + src software version",
then when this string is write to target migration_version node,
the vendor driver in the target device will compare it with its own
device info and software version.
If different models are allowed, the write just succeeds even
PCIIDs in src and target are different.so, it is the vendor driver to define whether two devices are able to
migrate, no matter their PCIIDs, mdev types, software versions..., which
provides vendor driver full flexibility.Quoted 9 lines
Quoted 1 line
do you think it's good?
Yeh that's OK; I guess it's going to need to have a big table in their with all the PCIIDs in.
The alternative would be to abstract it a little; e.g. to say it's an Intel-gpu-core-v4 and then it would be less worried about the exact clock speed etc - but yes you might be right htat PCIIDs might be best for checking for quirks.Quoted 10 lines
glad that you are agreed with it:)
I think the vendor driver still can choose a way to abstract a little (e.g. Intel-gpu-core-v4...) if they think it's better. In that case, themigration_stringwould be something like "Intel-gpu-core-v4 + instance number + software version".
IOW, they can choose anything they think appropriate to identify migration compatibility of a device.
But Alex is right, we have to prevent namespace overlapping. So I think we need to ensure src and target devices are from the same vendors. or, any other ideas?Quoted 1 line
That's why I kept the 'Intel' in that example; or PCI vendor ID; I was
Yes, it's a good idea!
could we add a line in the doc saying that
it is the vendor driver to add a unique string to avoid namespace collision?Quoted 9 lines
Quoted 5 lines
Quoted 3 lines
So why don't we split the difference; lets say that it should start with the hex PCI Vendor ID.
The problem is for mdev devices, if the parent devices are not PCI devices, they don't have PCI vendor IDs.
Hmm it would be best not to invent a whole new way of giving unique idenitifiers for vendors if we can.
what about leveraging the flags in vfio device info ?
#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ #define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ #define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2) /* vfio-platform device */ #define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */ #define VFIO_DEVICE_FLAGS_CCW (1 << 4) /* vfio-ccw device */ #define VFIO_DEVICE_FLAGS_AP (1 << 5) /* vfio-ap device */Then for
migration_versionstring,
The first 64 bits are for device type, the second 64 bits are for device id. e.g.
for PCI devices, it could beVFIO_DEVICE_FLAGS_PCI+ PCI ID.Quoted 6 lines
Currently in the doc, we only define PCI devices to use PCI ID as the second 64 bits. In future, if other types of devices want to support migration, they can define their own parts of device id. e.g. use ACPI ID as the second 64-bit...
sounds good?
[dead thread resurrection alert]
Not really. We're deep into territory that we were trying to avoid. We had previously defined the version string as opaque (not transparent) specifically because we did not want userspace to make assumptions about compatibility based on the content of the string. It was 100% left to the vendor driver to determine compatibility. The mdev type was the full extent of the first level filter that userspace could use to narrow the set of potentially compatible devices. If we remove that due to physical device migration support, I'm not sure how we simplify the problem for userspace.
We need to step away from PCI IDs and parent devices. We're not designing a solution that only works for PCI, there's no guarantee that parent devices are similar or even from the same vendor.
Does the mdev type sufficiently solve the problem for mdev devices? If so, then what can we learn from it and how can we apply an equivalence to physical devices? For example, should a vfio bus driver (vfio-pci or vfio-mdev) expose
vfio_migration_typeandvfio_migration_versionattributes under the device in sysfs where the_typeprovides the first level, user transparent, matching string (ex. mdev type for mdev devices) while the_versionprovides the user opaque, vendor known compatibility test?This pushes the problem out to the drivers where we can perhaps incorporate the module name to avoid collisions. For example Yan's vendor extension proposal makes use of vfio-pci with extension modules loaded via an alias incorporating the PCI vendor and device ID. So vfio-pci might use a type of "vfio-pci:$ALIAS".
Quoted 4 lines
It's still a bit messy that someone needs to go evaluate all these types between devices that exist and mdev devices that might exist if created, but I don't have any good ideas to resolve that (maybe a new class hierarchy?). Thanks,
hi Alex
Quoted 7 lines
yes, with the same
mdev_type, user still has to enumerate all parent devices and test between the supportedmdev_typesto know whether two mdev devices are compatible.
maybe this is not a problem? in reality, it is the administrator that specifies two devices and the management tool feedbacks compatibility result. management tool is not required to pre-test and setup the compatibility map beforehand.That's exactly the purpose of this interface though is to give the management tools some indication that a migration has a chance of working.
Quoted 4 lines
If so, then the only problem left is namespace collision. given that the
migration_versionnodes is exported by vendor driver, maybe it can also embed its module name in the migration version string, like "i915" in "i915-GVTg_V5_8", as you suggested above.Quoted 7 lines
No, we've already decided that the version string is opaque, the user is not to attempt to infer anything from it. That's why I've suggested another attribute in sysfs that does present type information that a user can compare. Thanks,
Alex
ok. got it.
one more thing I want to confirm is that do you think it's a necessary restriction that "The mdev devices are of the same type" ? could mdev and phys devices both expose "vfio_migration_type" and "vfio_migration_version" under device sysfs so that it may not be confined inmdev_type? (e.g. when aggregator is enabled, though two mdevs are of the samemdev_type, they are not actually compatible; and two mdevs are compatible though theirmdev_typeis not equal.)
Quoted 2 lines
for mdev devices, we could still expose
vfio_migration_versionattribute undermdev_typefor detection before mdev generated.
I tried to simplify the problem a bit, but we keep going backwards. If the requirement is that potentially any source device can migrate to any target device and we cannot provide any means other than writing an opaque source string into a version attribute on the target and evaluating the result to determine compatibility, then we're requiring userspace to do an exhaustive search to find a potential match. That sucks. We don't have an agreed proposal for aggregation and even this exhaustive search mechanism doesn't solve that problem, ex. the target type may be able to support a compatible aggregation, but the user might find after they've created the device that their aggregation was wrong and the resulting device doesn't even match the version compatibility of the parent type. We're arguing our way into an unsolvable problem and unless we can simplify it, I'm afraid there's no solution, we're just going to have a bad interface for the user to test compatibility, which is not really acceptable. Thanks,
Alex
Quoted 240 lines · * Alex Williamson ([email protected]) wrote:
Quoted 234 lines · On Wed, 3 Jun 2020 01:24:43 -0400 Yan Zhao <[email protected]> wrote:
Quoted 217 lines · Alex Williamson
Quoted 197 lines · On Tue, 2 Jun 2020 23:19:48 -0400 Yan Zhao <[email protected]> wrote:
Quoted 189 lines · Alex Williamson
Quoted 148 lines · On Wed, 29 Apr 2020 20:39:50 -0400 Yan Zhao <[email protected]> wrote:
On Wed, Apr 29, 2020 at 05:48:44PM +0800, Dr. David Alan Gilbert wrote:
<snip>Quoted 122 lines
Quoted 122 lines
Quoted 122 lines
Quoted 121 lines
Quoted 116 lines
Quoted 105 lines
Quoted 105 lines
An mdev type is meant to define a software compatible interface, so in
the case of mdev->mdev migration, doesn't migrating to a different type
fail the most basic of compatibility tests that we expect userspace to
perform? IOW, if two mdev types are migration compatible, it seems a
prerequisite to that is that they provide the same software interface,
which means they should be the same mdev type.In the hybrid cases of mdev->phys or phys->mdev, how does a
management
tool begin to even guess what might be compatible? Are we expecting
libvirt to probe ever device with this attribute in the system? Is
there going to be a new class hierarchy created to enumerate all
possible migrate-able devices?yes, management tool needs to guess and test migration compatible
between two devices. But I think it's not the problem only for
mdev->phys or phys->mdev. even for mdev->mdev, management tool needs
to
first assume that the two mdevs have the same type of parent devices
(e.g.their pciids are equal). otherwise, it's still enumerating
possibilities.on the other hand, for two mdevs,
mdev1 from pdev1, its mdev_type is 1/2 of pdev1;
mdev2 from pdev2, its mdev_type is 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between
mdev1 <-> mdev2.How could the manage tool figure out that 1/2 of pdev1 is equivalent
to 1/4 of pdev2? If we really want to allow such thing happen, the best
choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this migration_version interface.
the management tool can take advantage of this interface to know if two
devices are migration compatible, no matter they are mdevs, non-mdevs,
or mix.as I know, (please correct me if not right), current libvirt still
requires manually generating mdev devices, and it just duplicates src vm
configuration to the target vm.
for libvirt, currently it's always phys->phys and mdev->mdev (and of the
same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise,
why do we need to introduce this migration_version interface and leave
the judgement of migration compatibility to vendor driver? why not simply
set the criteria to something like "pciids of parent devices are equal,
and mdev types are equal" ?btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?I think it just needs to read src migration_version under src dev node,
and test it in target migration version under target dev node.after all, through this interface we just help the upper layer
knowing available options through reading and testing, and they decide
to use it or not.Can we simplify the requirement by allowing only mdev<->mdev and
phys<->phys migration? If an customer does want to migrate between a
mdev and phys, he could wrap physical device into a wrapped mdev
instance (with the same type as the source mdev) instead of using vendor
ops. Doing so does add some burden but if mdev<->phys is not dominant
usage then such tradeoff might be worthywhile...If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no
difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's
easy for vendor driver to tell if a phys device is migration compatible
to a mdev device according it supports it or not.It surprises me that the PCIID matching is a requirement; I'd assumed
with this clever mdev name setup that you could migrate between two
different models in a series, or to a newer model, as long as they
both supported the same mdev view.hi Dave
the migration_version string is transparent to userspace, and is
completely defined by vendor driver.
I put it there just as an example of how vendor driver may implement it.
e.g.
the src migration_version string is "src PCIID + src software version",
then when this string is write to target migration_version node,
the vendor driver in the target device will compare it with its own
device info and software version.
If different models are allowed, the write just succeeds even
PCIIDs in src and target are different.so, it is the vendor driver to define whether two devices are able to
migrate, no matter their PCIIDs, mdev types, software versions..., which
provides vendor driver full flexibility.do you think it's good?
Yeh that's OK; I guess it's going to need to have a big table in their
with all the PCIIDs in.
The alternative would be to abstract it a little; e.g. to say it's
an Intel-gpu-core-v4 and then it would be less worried about the exact
clock speed etc - but yes you might be right htat PCIIDs might be best
for checking for quirks.Quoted 10 lines
glad that you are agreed with it:)
I think the vendor driver still can choose a way to abstract a little (e.g. Intel-gpu-core-v4...) if they think it's better. In that case, themigration_stringwould be something like "Intel-gpu-core-v4 + instance number + software version".
IOW, they can choose anything they think appropriate to identify migration compatibility of a device.
But Alex is right, we have to prevent namespace overlapping. So I think we need to ensure src and target devices are from the same vendors. or, any other ideas?Quoted 1 line
That's why I kept the 'Intel' in that example; or PCI vendor ID; I was
Yes, it's a good idea!
could we add a line in the doc saying that
it is the vendor driver to add a unique string to avoid namespace collision?Quoted 9 lines
Quoted 5 lines
Quoted 3 lines
So why don't we split the difference; lets say that it should start with the hex PCI Vendor ID.
The problem is for mdev devices, if the parent devices are not PCI devices, they don't have PCI vendor IDs.
Hmm it would be best not to invent a whole new way of giving unique idenitifiers for vendors if we can.
what about leveraging the flags in vfio device info ?
#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ #define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ #define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2) /* vfio-platform device */ #define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */ #define VFIO_DEVICE_FLAGS_CCW (1 << 4) /* vfio-ccw device */ #define VFIO_DEVICE_FLAGS_AP (1 << 5) /* vfio-ap device */Then for
migration_versionstring,
The first 64 bits are for device type, the second 64 bits are for device id. e.g.
for PCI devices, it could beVFIO_DEVICE_FLAGS_PCI+ PCI ID.Quoted 6 lines
Currently in the doc, we only define PCI devices to use PCI ID as the second 64 bits. In future, if other types of devices want to support migration, they can define their own parts of device id. e.g. use ACPI ID as the second 64-bit...
sounds good?
[dead thread resurrection alert]
Not really. We're deep into territory that we were trying to avoid. We had previously defined the version string as opaque (not transparent) specifically because we did not want userspace to make assumptions about compatibility based on the content of the string. It was 100% left to the vendor driver to determine compatibility. The mdev type was the full extent of the first level filter that userspace could use to narrow the set of potentially compatible devices. If we remove that due to physical device migration support, I'm not sure how we simplify the problem for userspace.
We need to step away from PCI IDs and parent devices. We're not designing a solution that only works for PCI, there's no guarantee that parent devices are similar or even from the same vendor.
Does the mdev type sufficiently solve the problem for mdev devices? If so, then what can we learn from it and how can we apply an equivalence to physical devices? For example, should a vfio bus driver (vfio-pci or vfio-mdev) expose
vfio_migration_typeandvfio_migration_versionattributes under the device in sysfs where the_typeprovides the first level, user transparent, matching string (ex. mdev type for mdev devices) while the_versionprovides the user opaque, vendor known compatibility test?This pushes the problem out to the drivers where we can perhaps incorporate the module name to avoid collisions. For example Yan's vendor extension proposal makes use of vfio-pci with extension modules loaded via an alias incorporating the PCI vendor and device ID. So vfio-pci might use a type of "vfio-pci:$ALIAS".
Quoted 4 lines
It's still a bit messy that someone needs to go evaluate all these types between devices that exist and mdev devices that might exist if created, but I don't have any good ideas to resolve that (maybe a new class hierarchy?). Thanks,
hi Alex
Quoted 7 lines
yes, with the same
mdev_type, user still has to enumerate all parent devices and test between the supportedmdev_typesto know whether two mdev devices are compatible.
maybe this is not a problem? in reality, it is the administrator that specifies two devices and the management tool feedbacks compatibility result. management tool is not required to pre-test and setup the compatibility map beforehand.That's exactly the purpose of this interface though is to give the management tools some indication that a migration has a chance of working.
Quoted 4 lines
If so, then the only problem left is namespace collision. given that the
migration_versionnodes is exported by vendor driver, maybe it can also embed its module name in the migration version string, like "i915" in "i915-GVTg_V5_8", as you suggested above.Quoted 7 lines
No, we've already decided that the version string is opaque, the user is not to attempt to infer anything from it. That's why I've suggested another attribute in sysfs that does present type information that a user can compare. Thanks,
Alex
ok. got it.
one more thing I want to confirm is that do you think it's a necessary restriction that "The mdev devices are of the same type" ? could mdev and phys devices both expose "vfio_migration_type" and "vfio_migration_version" under device sysfs so that it may not be confined inmdev_type? (e.g. when aggregator is enabled, though two mdevs are of the samemdev_type, they are not actually compatible; and two mdevs are compatible though theirmdev_typeis not equal.)Quoted 2 lines
for mdev devices, we could still expose
vfio_migration_versionattribute undermdev_typefor detection before mdev generated.
Quoted 7 lines
I tried to simplify the problem a bit, but we keep going backwards. If the requirement is that potentially any source device can migrate to any target device and we cannot provide any means other than writing an opaque source string into a version attribute on the target and evaluating the result to determine compatibility, then we're requiring userspace to do an exhaustive search to find a potential match. That sucks.
Why is the mechanism a 'write and test' why isn't it a 'write and ask'? i.e. the destination tells the driver what type it's received from the source, and the driver replies with a set of compatible configurations (in some preferred order).
It's also not clear to me why the name has to be that opaque; I agree it's only got to be understood by the driver but that doesn't seem to be a reason for the driver to make it purposely obfuscated. I wouldn't expect a user to be able to parse it necessarily; but would expect something that would be useful for an error message.
Dave
Quoted 10 lines
We don't have an agreed proposal for aggregation and even this exhaustive search mechanism doesn't solve that problem, ex. the target type may be able to support a compatible aggregation, but the user might find after they've created the device that their aggregation was wrong and the resulting device doesn't even match the version compatibility of the parent type. We're arguing our way into an unsolvable problem and unless we can simplify it, I'm afraid there's no solution, we're just going to have a bad interface for the user to test compatibility, which is not really acceptable. Thanks,
Quoted 3 lines
Alex
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 249 lines · On Fri, 5 Jun 2020 11:22:24 +0100 "Dr. David Alan Gilbert"…
Quoted 240 lines · * Alex Williamson ([email protected]) wrote:
Quoted 234 lines · On Wed, 3 Jun 2020 01:24:43 -0400 Yan Zhao <[email protected]> wrote:
Quoted 217 lines · Alex Williamson
Quoted 197 lines · On Tue, 2 Jun 2020 23:19:48 -0400 Yan Zhao <[email protected]> wrote:
Quoted 189 lines · Alex Williamson
Quoted 148 lines · On Wed, 29 Apr 2020 20:39:50 -0400 Yan Zhao <[email protected]> wrote:
On Wed, Apr 29, 2020 at 05:48:44PM +0800, Dr. David Alan Gilbert wrote:
<snip>Quoted 122 lines
Quoted 122 lines
Quoted 122 lines
Quoted 121 lines
Quoted 116 lines
Quoted 115 lines
An mdev type is meant to define a software compatible interface, so in
the case of mdev->mdev migration, doesn't migrating to a different type
fail the most basic of compatibility tests that we expect userspace to
perform? IOW, if two mdev types are migration compatible, it seems a
prerequisite to that is that they provide the same software interface,
which means they should be the same mdev type.In the hybrid cases of mdev->phys or phys->mdev, how does a
management
tool begin to even guess what might be compatible? Are we expecting
libvirt to probe ever device with this attribute in the system? Is
there going to be a new class hierarchy created to enumerate all
possible migrate-able devices?yes, management tool needs to guess and test migration compatible
between two devices. But I think it's not the problem only for
mdev->phys or phys->mdev. even for mdev->mdev, management tool needs
to
first assume that the two mdevs have the same type of parent devices
(e.g.their pciids are equal). otherwise, it's still enumerating
possibilities.on the other hand, for two mdevs,
mdev1 from pdev1, its mdev_type is 1/2 of pdev1;
mdev2 from pdev2, its mdev_type is 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between
mdev1 <-> mdev2.How could the manage tool figure out that 1/2 of pdev1 is equivalent
to 1/4 of pdev2? If we really want to allow such thing happen, the best
choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this migration_version interface.
the management tool can take advantage of this interface to know if two
devices are migration compatible, no matter they are mdevs, non-mdevs,
or mix.as I know, (please correct me if not right), current libvirt still
requires manually generating mdev devices, and it just duplicates src vm
configuration to the target vm.
for libvirt, currently it's always phys->phys and mdev->mdev (and of the
same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise,
why do we need to introduce this migration_version interface and leave
the judgement of migration compatibility to vendor driver? why not simply
set the criteria to something like "pciids of parent devices are equal,
and mdev types are equal" ?btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?I think it just needs to read src migration_version under src dev node,
and test it in target migration version under target dev node.after all, through this interface we just help the upper layer
knowing available options through reading and testing, and they decide
to use it or not.Can we simplify the requirement by allowing only mdev<->mdev and
phys<->phys migration? If an customer does want to migrate between a
mdev and phys, he could wrap physical device into a wrapped mdev
instance (with the same type as the source mdev) instead of using vendor
ops. Doing so does add some burden but if mdev<->phys is not dominant
usage then such tradeoff might be worthywhile...If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no
difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's
easy for vendor driver to tell if a phys device is migration compatible
to a mdev device according it supports it or not.It surprises me that the PCIID matching is a requirement; I'd assumed
with this clever mdev name setup that you could migrate between two
different models in a series, or to a newer model, as long as they
both supported the same mdev view.hi Dave
the migration_version string is transparent to userspace, and is
completely defined by vendor driver.
I put it there just as an example of how vendor driver may implement it.
e.g.
the src migration_version string is "src PCIID + src software version",
then when this string is write to target migration_version node,
the vendor driver in the target device will compare it with its own
device info and software version.
If different models are allowed, the write just succeeds even
PCIIDs in src and target are different.so, it is the vendor driver to define whether two devices are able to
migrate, no matter their PCIIDs, mdev types, software versions..., which
provides vendor driver full flexibility.do you think it's good?
Yeh that's OK; I guess it's going to need to have a big table in their
with all the PCIIDs in.
The alternative would be to abstract it a little; e.g. to say it's
an Intel-gpu-core-v4 and then it would be less worried about the exact
clock speed etc - but yes you might be right htat PCIIDs might be best
for checking for quirks.glad that you are agreed with it:)
I think the vendor driver still can choose a way to abstract a little
(e.g. Intel-gpu-core-v4...) if they think it's better. In that case, the
migration_string would be something like "Intel-gpu-core-v4 + instance
number + software version".
IOW, they can choose anything they think appropriate to identify migration
compatibility of a device.
But Alex is right, we have to prevent namespace overlapping. So I think
we need to ensure src and target devices are from the same vendors.
or, any other ideas?Quoted 1 line
That's why I kept the 'Intel' in that example; or PCI vendor ID; I was
Yes, it's a good idea!
could we add a line in the doc saying that
it is the vendor driver to add a unique string to avoid namespace collision?Quoted 9 lines
Quoted 5 lines
Quoted 3 lines
So why don't we split the difference; lets say that it should start with the hex PCI Vendor ID.
The problem is for mdev devices, if the parent devices are not PCI devices, they don't have PCI vendor IDs.
Hmm it would be best not to invent a whole new way of giving unique idenitifiers for vendors if we can.
what about leveraging the flags in vfio device info ?
#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ #define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ #define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2) /* vfio-platform device */ #define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */ #define VFIO_DEVICE_FLAGS_CCW (1 << 4) /* vfio-ccw device */ #define VFIO_DEVICE_FLAGS_AP (1 << 5) /* vfio-ap device */Then for
migration_versionstring,
The first 64 bits are for device type, the second 64 bits are for device id. e.g.
for PCI devices, it could beVFIO_DEVICE_FLAGS_PCI+ PCI ID.Quoted 6 lines
Currently in the doc, we only define PCI devices to use PCI ID as the second 64 bits. In future, if other types of devices want to support migration, they can define their own parts of device id. e.g. use ACPI ID as the second 64-bit...
sounds good?
[dead thread resurrection alert]
Not really. We're deep into territory that we were trying to avoid. We had previously defined the version string as opaque (not transparent) specifically because we did not want userspace to make assumptions about compatibility based on the content of the string. It was 100% left to the vendor driver to determine compatibility. The mdev type was the full extent of the first level filter that userspace could use to narrow the set of potentially compatible devices. If we remove that due to physical device migration support, I'm not sure how we simplify the problem for userspace.
We need to step away from PCI IDs and parent devices. We're not designing a solution that only works for PCI, there's no guarantee that parent devices are similar or even from the same vendor.
Does the mdev type sufficiently solve the problem for mdev devices? If so, then what can we learn from it and how can we apply an equivalence to physical devices? For example, should a vfio bus driver (vfio-pci or vfio-mdev) expose
vfio_migration_typeandvfio_migration_versionattributes under the device in sysfs where the_typeprovides the first level, user transparent, matching string (ex. mdev type for mdev devices) while the_versionprovides the user opaque, vendor known compatibility test?This pushes the problem out to the drivers where we can perhaps incorporate the module name to avoid collisions. For example Yan's vendor extension proposal makes use of vfio-pci with extension modules loaded via an alias incorporating the PCI vendor and device ID. So vfio-pci might use a type of "vfio-pci:$ALIAS".
Quoted 4 lines
It's still a bit messy that someone needs to go evaluate all these types between devices that exist and mdev devices that might exist if created, but I don't have any good ideas to resolve that (maybe a new class hierarchy?). Thanks,
hi Alex
Quoted 7 lines
yes, with the same
mdev_type, user still has to enumerate all parent devices and test between the supportedmdev_typesto know whether two mdev devices are compatible.
maybe this is not a problem? in reality, it is the administrator that specifies two devices and the management tool feedbacks compatibility result. management tool is not required to pre-test and setup the compatibility map beforehand.That's exactly the purpose of this interface though is to give the management tools some indication that a migration has a chance of working.
Quoted 4 lines
If so, then the only problem left is namespace collision. given that the
migration_versionnodes is exported by vendor driver, maybe it can also embed its module name in the migration version string, like "i915" in "i915-GVTg_V5_8", as you suggested above.Quoted 7 lines
No, we've already decided that the version string is opaque, the user is not to attempt to infer anything from it. That's why I've suggested another attribute in sysfs that does present type information that a user can compare. Thanks,
Alex
ok. got it.
one more thing I want to confirm is that do you think it's a necessary restriction that "The mdev devices are of the same type" ? could mdev and phys devices both expose "vfio_migration_type" and "vfio_migration_version" under device sysfs so that it may not be confined inmdev_type? (e.g. when aggregator is enabled, though two mdevs are of the samemdev_type, they are not actually compatible; and two mdevs are compatible though theirmdev_typeis not equal.)Quoted 2 lines
for mdev devices, we could still expose
vfio_migration_versionattribute undermdev_typefor detection before mdev generated.Quoted 7 lines
I tried to simplify the problem a bit, but we keep going backwards. If the requirement is that potentially any source device can migrate to any target device and we cannot provide any means other than writing an opaque source string into a version attribute on the target and evaluating the result to determine compatibility, then we're requiring userspace to do an exhaustive search to find a potential match. That sucks.
Quoted 4 lines
Why is the mechanism a 'write and test' why isn't it a 'write and ask'? i.e. the destination tells the driver what type it's received from the source, and the driver replies with a set of compatible configurations (in some preferred order).
A 'write and ask' interface would imply some sort of session in order to not be racy with concurrent users. More likely this would imply an ioctl interface, which I don't think we have in sysfs. Where do we host this ioctl?
Quoted 5 lines
It's also not clear to me why the name has to be that opaque; I agree it's only got to be understood by the driver but that doesn't seem to be a reason for the driver to make it purposely obfuscated. I wouldn't expect a user to be able to parse it necessarily; but would expect something that would be useful for an error message.
If the name is not opaque, then we're going to rat hole on the format and the fields and evolving that format for every feature a vendor decides they want the user to be able to parse out of the version string. Then we require a full specification of the string in order that it be parsed according to a standard such that we don't break users inferring features in subtly different ways.
This is a lot like the problems with mdev description attributes, libvirt complains they can't use description because there's no standard formatting, but even with two vendors describing the same class of device we don't have an agreed set of things to expose in the description attribute. Thanks,
Alex
Quoted 257 lines · * Alex Williamson ([email protected]) wrote:
Quoted 249 lines · On Fri, 5 Jun 2020 11:22:24 +0100 "Dr. David Alan Gilbert"…
Quoted 240 lines · * Alex Williamson ([email protected]) wrote:
Quoted 234 lines · On Wed, 3 Jun 2020 01:24:43 -0400 Yan Zhao <[email protected]> wrote:
Quoted 217 lines · Alex Williamson
Quoted 197 lines · On Tue, 2 Jun 2020 23:19:48 -0400 Yan Zhao <[email protected]> wrote:
Quoted 189 lines · Alex Williamson
Quoted 148 lines · On Wed, 29 Apr 2020 20:39:50 -0400 Yan Zhao <[email protected]> wrote:
On Wed, Apr 29, 2020 at 05:48:44PM +0800, Dr. David Alan Gilbert wrote:
<snip>Quoted 122 lines
Quoted 122 lines
Quoted 122 lines
Quoted 121 lines
Quoted 117 lines
An mdev type is meant to define a software compatible interface, so in
the case of mdev->mdev migration, doesn't migrating to a different type
fail the most basic of compatibility tests that we expect userspace to
perform? IOW, if two mdev types are migration compatible, it seems a
prerequisite to that is that they provide the same software interface,
which means they should be the same mdev type.In the hybrid cases of mdev->phys or phys->mdev, how does a
management
tool begin to even guess what might be compatible? Are we expecting
libvirt to probe ever device with this attribute in the system? Is
there going to be a new class hierarchy created to enumerate all
possible migrate-able devices?yes, management tool needs to guess and test migration compatible
between two devices. But I think it's not the problem only for
mdev->phys or phys->mdev. even for mdev->mdev, management tool needs
to
first assume that the two mdevs have the same type of parent devices
(e.g.their pciids are equal). otherwise, it's still enumerating
possibilities.on the other hand, for two mdevs,
mdev1 from pdev1, its mdev_type is 1/2 of pdev1;
mdev2 from pdev2, its mdev_type is 1/4 of pdev2;
if pdev2 is exactly 2 times of pdev1, why not allow migration between
mdev1 <-> mdev2.How could the manage tool figure out that 1/2 of pdev1 is equivalent
to 1/4 of pdev2? If we really want to allow such thing happen, the best
choice is to report the same mdev type on both pdev1 and pdev2.
I think that's exactly the value of this migration_version interface.
the management tool can take advantage of this interface to know if two
devices are migration compatible, no matter they are mdevs, non-mdevs,
or mix.as I know, (please correct me if not right), current libvirt still
requires manually generating mdev devices, and it just duplicates src vm
configuration to the target vm.
for libvirt, currently it's always phys->phys and mdev->mdev (and of the
same mdev type).
But it does not justify that hybrid cases should not be allowed. otherwise,
why do we need to introduce this migration_version interface and leave
the judgement of migration compatibility to vendor driver? why not simply
set the criteria to something like "pciids of parent devices are equal,
and mdev types are equal" ?btw mdev<->phys just brings trouble to upper stack as Alex pointed out.
could you help me understand why it will bring trouble to upper stack?I think it just needs to read src migration_version under src dev node,
and test it in target migration version under target dev node.after all, through this interface we just help the upper layer
knowing available options through reading and testing, and they decide
to use it or not.Can we simplify the requirement by allowing only mdev<->mdev and
phys<->phys migration? If an customer does want to migrate between a
mdev and phys, he could wrap physical device into a wrapped mdev
instance (with the same type as the source mdev) instead of using vendor
ops. Doing so does add some burden but if mdev<->phys is not dominant
usage then such tradeoff might be worthywhile...If the interfaces for phys<->phys and mdev<->mdev are consistent, it makes no
difference to phys<->mdev, right?
I think the vendor string for a mdev device is something like:
"Parent PCIID + mdev type + software version", and
that for a phys device is something like:
"PCIID + software version".
as long as we don't migrate between devices from different vendors, it's
easy for vendor driver to tell if a phys device is migration compatible
to a mdev device according it supports it or not.It surprises me that the PCIID matching is a requirement; I'd assumed
with this clever mdev name setup that you could migrate between two
different models in a series, or to a newer model, as long as they
both supported the same mdev view.hi Dave
the migration_version string is transparent to userspace, and is
completely defined by vendor driver.
I put it there just as an example of how vendor driver may implement it.
e.g.
the src migration_version string is "src PCIID + src software version",
then when this string is write to target migration_version node,
the vendor driver in the target device will compare it with its own
device info and software version.
If different models are allowed, the write just succeeds even
PCIIDs in src and target are different.so, it is the vendor driver to define whether two devices are able to
migrate, no matter their PCIIDs, mdev types, software versions..., which
provides vendor driver full flexibility.do you think it's good?
Yeh that's OK; I guess it's going to need to have a big table in their
with all the PCIIDs in.
The alternative would be to abstract it a little; e.g. to say it's
an Intel-gpu-core-v4 and then it would be less worried about the exact
clock speed etc - but yes you might be right htat PCIIDs might be best
for checking for quirks.glad that you are agreed with it:)
I think the vendor driver still can choose a way to abstract a little
(e.g. Intel-gpu-core-v4...) if they think it's better. In that case, the
migration_string would be something like "Intel-gpu-core-v4 + instance
number + software version".
IOW, they can choose anything they think appropriate to identify migration
compatibility of a device.
But Alex is right, we have to prevent namespace overlapping. So I think
we need to ensure src and target devices are from the same vendors.
or, any other ideas?That's why I kept the 'Intel' in that example; or PCI vendor ID; I was
Yes, it's a good idea!
could we add a line in the doc saying that
it is the vendor driver to add a unique string to avoid namespace collision?Quoted 9 lines
Quoted 5 lines
Quoted 3 lines
So why don't we split the difference; lets say that it should start with the hex PCI Vendor ID.
The problem is for mdev devices, if the parent devices are not PCI devices, they don't have PCI vendor IDs.
Hmm it would be best not to invent a whole new way of giving unique idenitifiers for vendors if we can.
what about leveraging the flags in vfio device info ?
#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ #define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ #define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2) /* vfio-platform device */ #define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */ #define VFIO_DEVICE_FLAGS_CCW (1 << 4) /* vfio-ccw device */ #define VFIO_DEVICE_FLAGS_AP (1 << 5) /* vfio-ap device */Then for
migration_versionstring,
The first 64 bits are for device type, the second 64 bits are for device id. e.g.
for PCI devices, it could beVFIO_DEVICE_FLAGS_PCI+ PCI ID.Quoted 6 lines
Currently in the doc, we only define PCI devices to use PCI ID as the second 64 bits. In future, if other types of devices want to support migration, they can define their own parts of device id. e.g. use ACPI ID as the second 64-bit...
sounds good?
[dead thread resurrection alert]
Not really. We're deep into territory that we were trying to avoid. We had previously defined the version string as opaque (not transparent) specifically because we did not want userspace to make assumptions about compatibility based on the content of the string. It was 100% left to the vendor driver to determine compatibility. The mdev type was the full extent of the first level filter that userspace could use to narrow the set of potentially compatible devices. If we remove that due to physical device migration support, I'm not sure how we simplify the problem for userspace.
We need to step away from PCI IDs and parent devices. We're not designing a solution that only works for PCI, there's no guarantee that parent devices are similar or even from the same vendor.
Does the mdev type sufficiently solve the problem for mdev devices? If so, then what can we learn from it and how can we apply an equivalence to physical devices? For example, should a vfio bus driver (vfio-pci or vfio-mdev) expose
vfio_migration_typeandvfio_migration_versionattributes under the device in sysfs where the_typeprovides the first level, user transparent, matching string (ex. mdev type for mdev devices) while the_versionprovides the user opaque, vendor known compatibility test?This pushes the problem out to the drivers where we can perhaps incorporate the module name to avoid collisions. For example Yan's vendor extension proposal makes use of vfio-pci with extension modules loaded via an alias incorporating the PCI vendor and device ID. So vfio-pci might use a type of "vfio-pci:$ALIAS".
Quoted 4 lines
It's still a bit messy that someone needs to go evaluate all these types between devices that exist and mdev devices that might exist if created, but I don't have any good ideas to resolve that (maybe a new class hierarchy?). Thanks,
hi Alex
Quoted 7 lines
yes, with the same
mdev_type, user still has to enumerate all parent devices and test between the supportedmdev_typesto know whether two mdev devices are compatible.
maybe this is not a problem? in reality, it is the administrator that specifies two devices and the management tool feedbacks compatibility result. management tool is not required to pre-test and setup the compatibility map beforehand.That's exactly the purpose of this interface though is to give the management tools some indication that a migration has a chance of working.
Quoted 4 lines
If so, then the only problem left is namespace collision. given that the
migration_versionnodes is exported by vendor driver, maybe it can also embed its module name in the migration version string, like "i915" in "i915-GVTg_V5_8", as you suggested above.Quoted 7 lines
No, we've already decided that the version string is opaque, the user is not to attempt to infer anything from it. That's why I've suggested another attribute in sysfs that does present type information that a user can compare. Thanks,
Alex
ok. got it.
one more thing I want to confirm is that do you think it's a necessary restriction that "The mdev devices are of the same type" ? could mdev and phys devices both expose "vfio_migration_type" and "vfio_migration_version" under device sysfs so that it may not be confined inmdev_type? (e.g. when aggregator is enabled, though two mdevs are of the samemdev_type, they are not actually compatible; and two mdevs are compatible though theirmdev_typeis not equal.)Quoted 2 lines
for mdev devices, we could still expose
vfio_migration_versionattribute undermdev_typefor detection before mdev generated.Quoted 7 lines
I tried to simplify the problem a bit, but we keep going backwards. If the requirement is that potentially any source device can migrate to any target device and we cannot provide any means other than writing an opaque source string into a version attribute on the target and evaluating the result to determine compatibility, then we're requiring userspace to do an exhaustive search to find a potential match. That sucks.
Quoted 4 lines
Why is the mechanism a 'write and test' why isn't it a 'write and ask'? i.e. the destination tells the driver what type it's received from the source, and the driver replies with a set of compatible configurations (in some preferred order).
Quoted 4 lines
A 'write and ask' interface would imply some sort of session in order to not be racy with concurrent users. More likely this would imply an ioctl interface, which I don't think we have in sysfs. Where do we host this ioctl?
Or one fd?
f=open()
write(f, "The ID I want")
do {
read(f, ...) -> The IDs we're offering that are compatible} while (!eof)
Quoted 13 lines
Quoted 5 lines
It's also not clear to me why the name has to be that opaque; I agree it's only got to be understood by the driver but that doesn't seem to be a reason for the driver to make it purposely obfuscated. I wouldn't expect a user to be able to parse it necessarily; but would expect something that would be useful for an error message.
If the name is not opaque, then we're going to rat hole on the format and the fields and evolving that format for every feature a vendor decides they want the user to be able to parse out of the version string. Then we require a full specification of the string in order that it be parsed according to a standard such that we don't break users inferring features in subtly different ways.
Quoted 5 lines
This is a lot like the problems with mdev description attributes, libvirt complains they can't use description because there's no standard formatting, but even with two vendors describing the same class of device we don't have an agreed set of things to expose in the description attribute. Thanks,
I'm not suggesting anything in anyway machine parsable; just something human readable that you can present in a menu/choice/configuration/error message. The text would be down to the vendor, and I'd suggest it start with the vendor name just as a disambiguator and to make it obvious when we get it grossly wrong.
Dave
Quoted 1 line
Alex
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 8 lines · Dr. David Alan Gilbert
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
I tried to simplify the problem a bit, but we keep going backwards. If the requirement is that potentially any source device can migrate to any target device and we cannot provide any means other than writing an opaque source string into a version attribute on the target and evaluating the result to determine compatibility, then we're requiring userspace to do an exhaustive search to find a potential match. That sucks.
hi Alex and Dave,
do you think it's good for us to put aside physical devices and mdev aggregation for the moment, and use Alex's original idea that
+ Userspace should regard two mdev devices compatible when ALL of below + conditions are met: + (0) The mdev devices are of the same type + (1) success when reading from migration_version attribute of one mdev device. + (2) success when writing migration_version string of one mdev device to + migration_version attribute of the other mdev device.
and what about adding another sysfs attribute for vendors to put
recommended migration compatible device type. e.g.
#cat /sys/bus/pci/devices/0000:00:02.0/mdev_supported_types/i915-GVTg_V5_8/migration_compatible_devices parent id: 8086 591dmdev_type: i915-GVTg_V5_8
vendors are free to define the format and conent of this migration_compatible_devices and it's even not to be a full list.
before libvirt or user to do live migration, they have to read and test migration_version attributes of src/target devices to check migration compatibility.
Thanks
Yan
Quoted 52 lines
Quoted 9 lines
Quoted 4 lines
Why is the mechanism a 'write and test' why isn't it a 'write and ask'? i.e. the destination tells the driver what type it's received from the source, and the driver replies with a set of compatible configurations (in some preferred order).
A 'write and ask' interface would imply some sort of session in order to not be racy with concurrent users. More likely this would imply an ioctl interface, which I don't think we have in sysfs. Where do we host this ioctl?
Or one fd?
f=open()
write(f, "The ID I want")do { read(f, ...) -> The IDs we're offering that are compatible} while (!eof)
Quoted 13 lines
Quoted 5 lines
It's also not clear to me why the name has to be that opaque; I agree it's only got to be understood by the driver but that doesn't seem to be a reason for the driver to make it purposely obfuscated. I wouldn't expect a user to be able to parse it necessarily; but would expect something that would be useful for an error message.
If the name is not opaque, then we're going to rat hole on the format and the fields and evolving that format for every feature a vendor decides they want the user to be able to parse out of the version string. Then we require a full specification of the string in order that it be parsed according to a standard such that we don't break users inferring features in subtly different ways.
Quoted 5 lines
This is a lot like the problems with mdev description attributes, libvirt complains they can't use description because there's no standard formatting, but even with two vendors describing the same class of device we don't have an agreed set of things to expose in the description attribute. Thanks,
I'm not suggesting anything in anyway machine parsable; just something human readable that you can present in a menu/choice/configuration/error message. The text would be down to the vendor, and I'd suggest it start with the vendor name just as a disambiguator and to make it obvious when we get it grossly wrong.
Dave
Quoted 1 line
Alex
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK_______________________________________________
intel-gvt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gvt-dev
Quoted 13 lines · On Tue, 9 Jun 2020 20:37:31 -0400 Yan Zhao <[email protected]> wrote:
Quoted 8 lines · Dr. David Alan Gilbert
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
I tried to simplify the problem a bit, but we keep going backwards. If the requirement is that potentially any source device can migrate to any target device and we cannot provide any means other than writing an opaque source string into a version attribute on the target and evaluating the result to determine compatibility, then we're requiring userspace to do an exhaustive search to find a potential match. That sucks.
hi Alex and Dave,
do you think it's good for us to put aside physical devices and mdev aggregation for the moment, and use Alex's original idea that
Review
Quoted 6 lines
(quoted diff) +6
-0+ Userspace should regard two mdev devices compatible when ALL of below + conditions are met: + (0) The mdev devices are of the same type + (1) success when reading from migration_version attribute of one mdev device. + (2) success when writing migration_version string of one mdev device to + migration_version attribute of the other mdev device.
I think Pandora's box is already opened, if we can't articulate how this solution would evolve to support features that we know are coming, why should we proceed with this approach? We've already seen interest in breaking rule (0) in this thread, so we can't focus the solution on mdev devices.
Maybe the best we can do is to compare one instance of a device to another instance of a device, without any capability to predict compatibility prior to creating devices, in the case on mdev. The string would need to include not only the device and vendor driver compatibility, but also anything that has modified the state of the device, such as creation time or post-creation time configuration. The user is left on their own for creating a compatible device, or filtering devices to determine which might be, or which might generate, compatible devices. It's not much of a solution, I wonder if anyone would even use it.
Quoted 11 lines
and what about adding another sysfs attribute for vendors to put
recommended migration compatible device type. e.g.
#cat /sys/bus/pci/devices/0000:00:02.0/mdev_supported_types/i915-GVTg_V5_8/migration_compatible_devices parent id: 8086 591dmdev_type: i915-GVTg_V5_8vendors are free to define the format and conent of this
migration_compatible_devicesand it's even not to be a full list.before libvirt or user to do live migration, they have to read and test
migration_versionattributes of src/target devices to check migration compatibility.
AFAICT, free-form, vendor defined attributes are useless to libvirt. Vendors could already put this information in the description attribute and have it ignored by userspace tools due to the lack of defined format. It's also not clear what value this provides when it's necessarily incomplete, a driver written today cannot know what future drivers might be compatible with its migration data. Thanks,
Alex
Quoted 52 lines · Alex Williamson
Quoted 13 lines · On Tue, 9 Jun 2020 20:37:31 -0400 Yan Zhao <[email protected]> wrote:
Quoted 8 lines · Dr. David Alan Gilbert
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
I tried to simplify the problem a bit, but we keep going backwards. If the requirement is that potentially any source device can migrate to any target device and we cannot provide any means other than writing an opaque source string into a version attribute on the target and evaluating the result to determine compatibility, then we're requiring userspace to do an exhaustive search to find a potential match. That sucks.
hi Alex and Dave,
do you think it's good for us to put aside physical devices and mdev aggregation for the moment, and use Alex's original idea thatReview
Quoted 6 lines
(quoted diff) +6
-0+ Userspace should regard two mdev devices compatible when ALL of below + conditions are met: + (0) The mdev devices are of the same type + (1) success when reading from migration_version attribute of one mdev device. + (2) success when writing migration_version string of one mdev device to + migration_version attribute of the other mdev device.I think Pandora's box is already opened, if we can't articulate how this solution would evolve to support features that we know are coming, why should we proceed with this approach? We've already seen interest in breaking rule (0) in this thread, so we can't focus the solution on mdev devices.
Maybe the best we can do is to compare one instance of a device to another instance of a device, without any capability to predict compatibility prior to creating devices, in the case on mdev. The string would need to include not only the device and vendor driver compatibility, but also anything that has modified the state of the device, such as creation time or post-creation time configuration. The user is left on their own for creating a compatible device, or filtering devices to determine which might be, or which might generate, compatible devices. It's not much of a solution, I wonder if anyone would even use it.
Quoted 11 lines
and what about adding another sysfs attribute for vendors to put
recommended migration compatible device type. e.g.
#cat /sys/bus/pci/devices/0000:00:02.0/mdev_supported_types/i915-GVTg_V5_8/migration_compatible_devices parent id: 8086 591dmdev_type: i915-GVTg_V5_8vendors are free to define the format and conent of this
migration_compatible_devicesand it's even not to be a full list.before libvirt or user to do live migration, they have to read and test
migration_versionattributes of src/target devices to check migration compatibility.
Quoted 7 lines
AFAICT, free-form, vendor defined attributes are useless to libvirt. Vendors could already put this information in the description attribute and have it ignored by userspace tools due to the lack of defined format. It's also not clear what value this provides when it's necessarily incomplete, a driver written today cannot know what future drivers might be compatible with its migration data. Thanks,
hi Alex
maybe the problem can be divided into two pieces:
(1) how to create/locate two migration compatible devices. For normal users, the most common and safest way to do it is to find a exact duplication of the source device. so for mdev, it's probably to create a target mdev of the same parent pci id, mdev type and creation parameters as the source mdev; and for physical devices, it's to locate a target device of the same pci id as the source device, plus some extra constraints (e.g. the target NVMe device is configured to the same remote device as the source NVMe device; or the target QAT device is supporting equal encryption algorithm set as the source QAT device...).
I think a possible solution for this piece is to let vendor drivers provide a creating/locating script to find such exact duplication of source device. Then before libvirt is about to do live migration, it can use this script to create a target vm of exactly duplicated configuration of the source vm.
(2) how to identify two devices are migration compatible after they are created and even they are not exactly identical (e.g. their parent devices are of minor difference in hardware SKUs). This identification is necessary even after in step (1) when libvirt has created/located two identical devices and are about to start live migration.
Also, users are free to create/configure target devices and use the read-and-test interfaces defined in this series to check if they are live migration compatible.
The read and test behavior in this patch set can grant vendor drivers the freedom to decide whether to support migration between only exact identical devices or able to support migration between devices of minor difference.
So, do you think we can let this series focus on the second piece of problem and leave the first piece to other future series.
Thanks
Yan
[meta-comment]
Quoted 1 line · Yan Zhao
On Wed, Apr 29, 2020 at 04:22:01PM +0800, Dr. David Alan Gilbert wrote:
[...]
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
This patchset introduces a migration_version attribute under sysfs
of VFIO
Quoted 1 line
Quoted 1 line
Mediated devices.
Hmm, several pages with up to 16 levels of quoting, with editors making the lines ragged, all before I get to the real meat of the email. Remember, it's okay to trim content,...
Quoted 5 lines
Quoted 3 lines
So why don't we split the difference; lets say that it should start with the hex PCI Vendor ID.
The problem is for mdev devices, if the parent devices are not PCI devices, they don't have PCI vendor IDs.
...to just what you are replying to.
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org
Quoted 13 lines · Eric Blake
[meta-comment]
Quoted 1 line · Yan Zhao
On Wed, Apr 29, 2020 at 04:22:01PM +0800, Dr. David Alan Gilbert wrote:
[...]
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
This patchset introduces a migration_version attribute under sysfs
of VFIO
Quoted 1 line
Mediated devices.
Hmm, several pages with up to 16 levels of quoting, with editors making the lines ragged, all before I get to the real meat of the email. Remember, it's okay to trim content,...
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
So why don't we split the difference; lets say that it should start with the hex PCI Vendor ID.
The problem is for mdev devices, if the parent devices are not PCI devices, they don't have PCI vendor IDs.
...to just what you are replying to.
sorry for that. next time I'll try to make a better balance between keeping conversation background and leaving the real meat of the email.
Thanks for reminding.
Yan