Skip to contentSkip to conversation

net: dsa: b53: ARL improvements

PATCH In review Florian Fainelli 3 participants 10 messages Apr 30, 2020 – May 1, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover net: dsa: b53: ARL improvements

Hi all,

This patch series improves the b53 driver ARL search code by renaming the ARL entries to be reflective of what they are: bins, and then introduce the number of buckets so we can properly bound check ARL searches.

The final patch removes an unused argument.

Florian Fainelli (4):
net: dsa: b53: Rename num_arl_entries to num_arl_bins
net: dsa: b53: Provide number of ARL buckets
net: dsa: b53: Bound check ARL searches
net: dsa: b53: Remove is_static argument to b53_read_op()

 drivers/net/dsa/b53/b53_common.c | 81 ++++++++++++++++++++------------
 drivers/net/dsa/b53/b53_priv.h   |  8 +++-
 2 files changed, 58 insertions(+), 31 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/4 net: dsa: b53: Rename num_arl_entries to num_arl_bins

The variable currently holds the number of ARL bins per ARL buckets, which is different from the number of ARL entries which would be bins times buckets. We will be adding a num_arl_buckets in a subsequent patch so get variables straight now.

---
 drivers/net/dsa/b53/b53_common.c | 52 ++++++++++++++++----------------
 drivers/net/dsa/b53/b53_priv.h   |  2 +-
 2 files changed, 27 insertions(+), 27 deletions(-)
drivers/net/dsa/b53/b53_common.c +26 -26
index c283593bef17..41b75f41677a 100644
@@ -1495,10 +1495,10 @@ static int b53_arl_read(struct b53_device *dev, u64 mac,
 	if (ret)
 		return ret;
 
-	bitmap_zero(free_bins, dev->num_arl_entries);
+	bitmap_zero(free_bins, dev->num_arl_bins);
 
 	/* Read the bins */
-	for (i = 0; i < dev->num_arl_entries; i++) {
+	for (i = 0; i < dev->num_arl_bins; i++) {
 		u64 mac_vid;
 		u32 fwd_entry;
 
@@ -1521,10 +1521,10 @@ static int b53_arl_read(struct b53_device *dev, u64 mac,
 		return 0;
 	}
 
-	if (bitmap_weight(free_bins, dev->num_arl_entries) == 0)
+	if (bitmap_weight(free_bins, dev->num_arl_bins) == 0)
 		return -ENOSPC;
 
-	*idx = find_first_bit(free_bins, dev->num_arl_entries);
+	*idx = find_first_bit(free_bins, dev->num_arl_bins);
 
 	return -ENOENT;
 }
@@ -1692,7 +1692,7 @@ int b53_fdb_dump(struct dsa_switch *ds, int port,
 		if (ret)
 			return ret;
 
-		if (priv->num_arl_entries > 2) {
+		if (priv->num_arl_bins > 2) {
 			b53_arl_search_rd(priv, 1, &results[1]);
 			ret = b53_fdb_copy(port, &results[1], cb, data);
 			if (ret)
@@ -2185,7 +2185,7 @@ struct b53_chip_data {
 	u16 enabled_ports;
 	u8 cpu_port;
 	u8 vta_regs[3];
-	u8 arl_entries;
+	u8 arl_bins;
 	u8 duplex_reg;
 	u8 jumbo_pm_reg;
 	u8 jumbo_size_reg;
@@ -2204,7 +2204,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM5325",
 		.vlans = 16,
 		.enabled_ports = 0x1f,
-		.arl_entries = 2,
+		.arl_bins = 2,
 		.cpu_port = B53_CPU_PORT_25,
 		.duplex_reg = B53_DUPLEX_STAT_FE,
 	},
@@ -2213,7 +2213,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM5365",
 		.vlans = 256,
 		.enabled_ports = 0x1f,
-		.arl_entries = 2,
+		.arl_bins = 2,
 		.cpu_port = B53_CPU_PORT_25,
 		.duplex_reg = B53_DUPLEX_STAT_FE,
 	},
@@ -2222,7 +2222,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM5389",
 		.vlans = 4096,
 		.enabled_ports = 0x1f,
-		.arl_entries = 4,
+		.arl_bins = 4,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2234,7 +2234,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM5395",
 		.vlans = 4096,
 		.enabled_ports = 0x1f,
-		.arl_entries = 4,
+		.arl_bins = 4,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2246,7 +2246,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM5397",
 		.vlans = 4096,
 		.enabled_ports = 0x1f,
-		.arl_entries = 4,
+		.arl_bins = 4,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS_9798,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2258,7 +2258,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM5398",
 		.vlans = 4096,
 		.enabled_ports = 0x7f,
-		.arl_entries = 4,
+		.arl_bins = 4,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS_9798,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2270,7 +2270,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM53115",
 		.vlans = 4096,
 		.enabled_ports = 0x1f,
-		.arl_entries = 4,
+		.arl_bins = 4,
 		.vta_regs = B53_VTA_REGS,
 		.cpu_port = B53_CPU_PORT,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2282,7 +2282,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM53125",
 		.vlans = 4096,
 		.enabled_ports = 0xff,
-		.arl_entries = 4,
+		.arl_bins = 4,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2294,7 +2294,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM53128",
 		.vlans = 4096,
 		.enabled_ports = 0x1ff,
-		.arl_entries = 4,
+		.arl_bins = 4,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2306,7 +2306,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM63xx",
 		.vlans = 4096,
 		.enabled_ports = 0, /* pdata must provide them */
-		.arl_entries = 4,
+		.arl_bins = 4,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS_63XX,
 		.duplex_reg = B53_DUPLEX_STAT_63XX,
@@ -2318,7 +2318,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM53010",
 		.vlans = 4096,
 		.enabled_ports = 0x1f,
-		.arl_entries = 4,
+		.arl_bins = 4,
 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2330,7 +2330,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM53011",
 		.vlans = 4096,
 		.enabled_ports = 0x1bf,
-		.arl_entries = 4,
+		.arl_bins = 4,
 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2342,7 +2342,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM53012",
 		.vlans = 4096,
 		.enabled_ports = 0x1bf,
-		.arl_entries = 4,
+		.arl_bins = 4,
 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2354,7 +2354,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM53018",
 		.vlans = 4096,
 		.enabled_ports = 0x1f,
-		.arl_entries = 4,
+		.arl_bins = 4,
 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2366,7 +2366,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM53019",
 		.vlans = 4096,
 		.enabled_ports = 0x1f,
-		.arl_entries = 4,
+		.arl_bins = 4,
 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2378,7 +2378,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM585xx/586xx/88312",
 		.vlans	= 4096,
 		.enabled_ports = 0x1ff,
-		.arl_entries = 4,
+		.arl_bins = 4,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2390,7 +2390,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM583xx/11360",
 		.vlans = 4096,
 		.enabled_ports = 0x103,
-		.arl_entries = 4,
+		.arl_bins = 4,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2402,7 +2402,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM7445",
 		.vlans	= 4096,
 		.enabled_ports = 0x1ff,
-		.arl_entries = 4,
+		.arl_bins = 4,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2414,7 +2414,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM7278",
 		.vlans = 4096,
 		.enabled_ports = 0x1ff,
-		.arl_entries= 4,
+		.arl_bins = 4,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2442,7 +2442,7 @@ static int b53_switch_init(struct b53_device *dev)
 			dev->jumbo_pm_reg = chip->jumbo_pm_reg;
 			dev->cpu_port = chip->cpu_port;
 			dev->num_vlans = chip->vlans;
-			dev->num_arl_entries = chip->arl_entries;
+			dev->num_arl_bins = chip->arl_bins;
 			break;
 		}
 	}
drivers/net/dsa/b53/b53_priv.h +1 -1
index 3d42318bc3f1..1c5c443d571f 100644
@@ -117,7 +117,7 @@ struct b53_device {
 	u8 jumbo_pm_reg;
 	u8 jumbo_size_reg;
 	int reset_gpio;
-	u8 num_arl_entries;
+	u8 num_arl_bins;
 	enum dsa_tag_protocol tag_protocol;
 
 	/* used ports mask */
Signature · 1 line
2.17.1
maintainer Reviewed-by on v1 1/4
#2 lore raw

Re: [PATCH net-next 1/4] net: dsa: b53: Rename num_arl_entries to num_arl_bins

Quoted 6 lines · Florian Fainelli

The variable currently holds the number of ARL bins per ARL buckets, which is different from the number of ARL entries which would be bins times buckets. We will be adding a num_arl_buckets in a subsequent patch so get variables straight now.

Andrew

#3 lore raw

PATCH 2/4 net: dsa: b53: Provide number of ARL buckets

In reply to Florian Fainelli

In preparation for doing proper upper bound checking of FDB/MDB entries being added to the ARL, provide the number of ARL buckets for each switch chip we support. All chips have 1024 buckets, except 7278 which has only 256.

---
 drivers/net/dsa/b53/b53_common.c | 21 +++++++++++++++++++++
 drivers/net/dsa/b53/b53_priv.h   |  1 +
 2 files changed, 22 insertions(+)
drivers/net/dsa/b53/b53_common.c +21 -0
index 41b75f41677a..aa0836ac751c 100644
@@ -2186,6 +2186,7 @@ struct b53_chip_data {
 	u8 cpu_port;
 	u8 vta_regs[3];
 	u8 arl_bins;
+	u16 arl_buckets;
 	u8 duplex_reg;
 	u8 jumbo_pm_reg;
 	u8 jumbo_size_reg;
@@ -2205,6 +2206,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans = 16,
 		.enabled_ports = 0x1f,
 		.arl_bins = 2,
+		.arl_buckets = 1024,
 		.cpu_port = B53_CPU_PORT_25,
 		.duplex_reg = B53_DUPLEX_STAT_FE,
 	},
@@ -2214,6 +2216,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans = 256,
 		.enabled_ports = 0x1f,
 		.arl_bins = 2,
+		.arl_buckets = 1024,
 		.cpu_port = B53_CPU_PORT_25,
 		.duplex_reg = B53_DUPLEX_STAT_FE,
 	},
@@ -2223,6 +2226,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans = 4096,
 		.enabled_ports = 0x1f,
 		.arl_bins = 4,
+		.arl_buckets = 1024,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2235,6 +2239,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans = 4096,
 		.enabled_ports = 0x1f,
 		.arl_bins = 4,
+		.arl_buckets = 1024,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2247,6 +2252,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans = 4096,
 		.enabled_ports = 0x1f,
 		.arl_bins = 4,
+		.arl_buckets = 1024,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS_9798,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2259,6 +2265,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans = 4096,
 		.enabled_ports = 0x7f,
 		.arl_bins = 4,
+		.arl_buckets = 1024,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS_9798,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2271,6 +2278,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans = 4096,
 		.enabled_ports = 0x1f,
 		.arl_bins = 4,
+		.arl_buckets = 1024,
 		.vta_regs = B53_VTA_REGS,
 		.cpu_port = B53_CPU_PORT,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2283,6 +2291,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans = 4096,
 		.enabled_ports = 0xff,
 		.arl_bins = 4,
+		.arl_buckets = 1024,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2295,6 +2304,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans = 4096,
 		.enabled_ports = 0x1ff,
 		.arl_bins = 4,
+		.arl_buckets = 1024,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2307,6 +2317,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans = 4096,
 		.enabled_ports = 0, /* pdata must provide them */
 		.arl_bins = 4,
+		.arl_buckets = 1024,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS_63XX,
 		.duplex_reg = B53_DUPLEX_STAT_63XX,
@@ -2319,6 +2330,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans = 4096,
 		.enabled_ports = 0x1f,
 		.arl_bins = 4,
+		.arl_buckets = 1024,
 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2331,6 +2343,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans = 4096,
 		.enabled_ports = 0x1bf,
 		.arl_bins = 4,
+		.arl_buckets = 1024,
 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2343,6 +2356,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans = 4096,
 		.enabled_ports = 0x1bf,
 		.arl_bins = 4,
+		.arl_buckets = 1024,
 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2355,6 +2369,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans = 4096,
 		.enabled_ports = 0x1f,
 		.arl_bins = 4,
+		.arl_buckets = 1024,
 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2367,6 +2382,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans = 4096,
 		.enabled_ports = 0x1f,
 		.arl_bins = 4,
+		.arl_buckets = 1024,
 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2379,6 +2395,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans	= 4096,
 		.enabled_ports = 0x1ff,
 		.arl_bins = 4,
+		.arl_buckets = 1024,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2391,6 +2408,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans = 4096,
 		.enabled_ports = 0x103,
 		.arl_bins = 4,
+		.arl_buckets = 1024,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2403,6 +2421,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans	= 4096,
 		.enabled_ports = 0x1ff,
 		.arl_bins = 4,
+		.arl_buckets = 1024,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2415,6 +2434,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.vlans = 4096,
 		.enabled_ports = 0x1ff,
 		.arl_bins = 4,
+		.arl_buckets = 256,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2443,6 +2463,7 @@ static int b53_switch_init(struct b53_device *dev)
 			dev->cpu_port = chip->cpu_port;
 			dev->num_vlans = chip->vlans;
 			dev->num_arl_bins = chip->arl_bins;
+			dev->num_arl_buckets = chip->arl_buckets;
 			break;
 		}
 	}
drivers/net/dsa/b53/b53_priv.h +1 -0
index 1c5c443d571f..694e26cdfd4d 100644
@@ -118,6 +118,7 @@ struct b53_device {
 	u8 jumbo_size_reg;
 	int reset_gpio;
 	u8 num_arl_bins;
+	u16 num_arl_buckets;
 	enum dsa_tag_protocol tag_protocol;
 
 	/* used ports mask */
Signature · 1 line
2.17.1
maintainer Reviewed-by on v1 2/4
#4 lore raw

Re: [PATCH net-next 2/4] net: dsa: b53: Provide number of ARL buckets

Quoted 6 lines · Florian Fainelli

In preparation for doing proper upper bound checking of FDB/MDB entries being added to the ARL, provide the number of ARL buckets for each switch chip we support. All chips have 1024 buckets, except 7278 which has only 256.

Andrew

#5 lore raw

PATCH 3/4 net: dsa: b53: Bound check ARL searches

In reply to Florian Fainelli

ARL searches are done by reading two ARL entries at a time, do not cap the search at 1024 which would only limit us to half of the possible ARL capacity, but use b53_max_arl_entries() instead which does the right multiplication between bins and indexes.

---
 drivers/net/dsa/b53/b53_common.c | 2 +-
 drivers/net/dsa/b53/b53_priv.h   | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)
drivers/net/dsa/b53/b53_common.c +1 -1
index aa0836ac751c..9550d972f8c5 100644
@@ -1702,7 +1702,7 @@ int b53_fdb_dump(struct dsa_switch *ds, int port,
 				break;
 		}
 
-	} while (count++ < 1024);
+	} while (count++ < b53_max_arl_entries(priv) / 2);
 
 	return 0;
 }
drivers/net/dsa/b53/b53_priv.h +5 -0
index 694e26cdfd4d..e942c60e4365 100644
@@ -213,6 +213,11 @@ static inline int is58xx(struct b53_device *dev)
 #define B53_CPU_PORT_25	5
 #define B53_CPU_PORT	8
 
+static inline unsigned int b53_max_arl_entries(struct b53_device *dev)
+{
+	return dev->num_arl_buckets * dev->num_arl_bins;
+}
+
 struct b53_device *b53_switch_alloc(struct device *base,
 				    const struct b53_io_ops *ops,
 				    void *priv);
Signature · 1 line
2.17.1
maintainer Reviewed-by on v1 3/4
#6 lore raw

Re: [PATCH net-next 3/4] net: dsa: b53: Bound check ARL searches

Quoted 6 lines · Florian Fainelli

ARL searches are done by reading two ARL entries at a time, do not cap the search at 1024 which would only limit us to half of the possible ARL capacity, but use b53_max_arl_entries() instead which does the right multiplication between bins and indexes.

Andrew

#7 lore raw

PATCH 4/4 net: dsa: b53: Remove is_static argument to b53_read_op()

In reply to Florian Fainelli

This argument is not used.

---
 drivers/net/dsa/b53/b53_common.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/dsa/b53/b53_common.c +3 -3
index 9550d972f8c5..ceb8be653182 100644
@@ -1484,8 +1484,7 @@ static int b53_arl_rw_op(struct b53_device *dev, unsigned int op)
 }
 
 static int b53_arl_read(struct b53_device *dev, u64 mac,
-			u16 vid, struct b53_arl_entry *ent, u8 *idx,
-			bool is_valid)
+			u16 vid, struct b53_arl_entry *ent, u8 *idx)
 {
 	DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
 	unsigned int i;
@@ -1550,7 +1549,8 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
 	if (ret)
 		return ret;
 
-	ret = b53_arl_read(dev, mac, vid, &ent, &idx, is_valid);
+	ret = b53_arl_read(dev, mac, vid, &ent, &idx);
+
 	/* If this is a read, just finish now */
 	if (op)
 		return ret;
Signature · 1 line
2.17.1
maintainer
#9 lore raw
In reply to Florian Fainelli

From: Florian Fainelli <[email protected]>
Date: Thu, 30 Apr 2020 11:49:07 -0700

Quoted 6 lines

This patch series improves the b53 driver ARL search code by renaming the ARL entries to be reflective of what they are: bins, and then introduce the number of buckets so we can properly bound check ARL searches.

The final patch removes an unused argument.

Series applied, thanks.