arm64: Finish up assembler annotation modernisation
v2 cover arm64: Finish up assembler annotation modernisation
This series finishes up the conversion of arm64 to use modern assembler annotations. The second patch selects a symbol added by 2ce0d7f9766f0e49b (x86/asm: Provide a Kconfig symbol for disabling old assembly annotations) in -next to ensure that we don't regress and start using old annotations again.
This will be needed for BTI kernel support so it'd be good if they could end up on that branch, either through merging a topic branch or otherwise. The patches are generated against a merge of v5.7-rc3 and for-next/bti-user in the arm64 tree.
v2:
- Split out ret_to_user conversion and annotate ret_to_user and work_pending as a single code block.
- Swap a number of annotations between CODE and FUNC as suggested by Will.
Mark Brown (3):
arm64: entry: Refactor and modernise annotation for ret_to_user
arm64: kernel: Convert to modern annotations for assembly functions
arm64: Disable old style assembly annotations
arch/arm64/Kconfig | 1 + arch/arm64/kernel/cpu-reset.S | 4 +- arch/arm64/kernel/efi-rt-wrapper.S | 4 +- arch/arm64/kernel/entry-fpsimd.S | 20 ++++----- arch/arm64/kernel/entry.S | 27 ++++++------ arch/arm64/kernel/hibernate-asm.S | 16 +++---- arch/arm64/kernel/hyp-stub.S | 20 ++++----- arch/arm64/kernel/probes/kprobes_trampoline.S | 4 +- arch/arm64/kernel/reloc_test_syms.S | 44 +++++++++---------- arch/arm64/kernel/relocate_kernel.S | 4 +- arch/arm64/kernel/sleep.S | 12 ++--- arch/arm64/kernel/smccc-call.S | 8 ++-- 12 files changed, 83 insertions(+), 81 deletions(-)
Signature · 7 lines
2.20.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v2 1/3 arm64: entry: Refactor and modernise annotation for ret_to_user
As part of an effort to clarify and clean up the assembler annotations new macros have been introduced which annotate the start and end of blocks of code in assembler files. Currently ret_to_user has an out of line slow path work_pending placed above the main function which makes annotating the start and end of these blocks of code awkward.
Since work_pending is only referenced from within ret_to_user try to make things a bit clearer by moving it after the current ret_to_user and then marking both ret_to_user and work_pending as part of a single ret_to_user code block.
--- arch/arm64/kernel/entry.S | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-)
arch/arm64/kernel/entry.S +14 -13
@@ -727,21 +727,10 @@ el0_error_naked: b ret_to_user SYM_CODE_END(el0_error) -/* - * Ok, we need to do extra processing, enter the slow path. - */ -work_pending: - mov x0, sp // 'regs' - bl do_notify_resume -#ifdef CONFIG_TRACE_IRQFLAGS - bl trace_hardirqs_on // enabled while in userspace -#endif - ldr x1, [tsk, #TSK_TI_FLAGS] // re-check for single-step - b finish_ret_to_user /* * "slow" syscall return path. */ -ret_to_user: +SYM_CODE_START_LOCAL(ret_to_user) disable_daif gic_prio_kentry_setup tmp=x3 ldr x1, [tsk, #TSK_TI_FLAGS]
@@ -753,7 +742,19 @@ finish_ret_to_user: bl stackleak_erase #endif kernel_exit 0 -ENDPROC(ret_to_user) + +/* + * Ok, we need to do extra processing, enter the slow path. + */ +work_pending: + mov x0, sp // 'regs' + bl do_notify_resume +#ifdef CONFIG_TRACE_IRQFLAGS + bl trace_hardirqs_on // enabled while in userspace +#endif + ldr x1, [tsk, #TSK_TI_FLAGS] // re-check for single-step + b finish_ret_to_user +SYM_CODE_END(ret_to_user) .popsection // .entry.text
Signature · 7 lines
2.20.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v2 1/3] arm64: entry: Refactor and modernise annotation for ret_to_user
Quoted 6 lines · Mark Brown
As part of an effort to clarify and clean up the assembler annotations new macros have been introduced which annotate the start and end of blocks of code in assembler files. Currently
ret_to_userhas an out of line slow pathwork_pendingplaced above the main function which makes annotating the start and end of these blocks of code awkward.
Quoted 6 lines
Since
work_pendingis only referenced from withinret_to_usertry to make things a bit clearer by moving it after the currentret_to_userand then marking bothret_to_userandwork_pendingas part of a singleret_to_usercode block.Signed-off-by Mark Brown <[email protected]>
Makes sense to me, and the change looks sound, so:
Mark.
Quoted 60 lines
--- arch/arm64/kernel/entry.S | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-)arch/arm64/kernel/entry.S +14
-13@@ -727,21 +727,10 @@ el0_error_naked: b ret_to_user SYM_CODE_END(el0_error) -/* - * Ok, we need to do extra processing, enter the slow path. - */ -work_pending: - mov x0, sp // 'regs' - bl do_notify_resume -#ifdef CONFIG_TRACE_IRQFLAGS - bl trace_hardirqs_on // enabled while in userspace -#endif - ldr x1, [tsk, #TSK_TI_FLAGS] // re-check for single-step - b finish_ret_to_user /* * "slow" syscall return path. */ -ret_to_user: +SYM_CODE_START_LOCAL(ret_to_user) disable_daif gic_prio_kentry_setup tmp=x3 ldr x1, [tsk, #TSK_TI_FLAGS]@@ -753,7 +742,19 @@ finish_ret_to_user: bl stackleak_erase #endif kernel_exit 0 -ENDPROC(ret_to_user) + +/* + * Ok, we need to do extra processing, enter the slow path. + */ +work_pending: + mov x0, sp // 'regs' + bl do_notify_resume +#ifdef CONFIG_TRACE_IRQFLAGS + bl trace_hardirqs_on // enabled while in userspace +#endif + ldr x1, [tsk, #TSK_TI_FLAGS] // re-check for single-step + b finish_ret_to_user +SYM_CODE_END(ret_to_user) .popsection // .entry.textSignature · 7 lines
2.20.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v2 2/3 arm64: kernel: Convert to modern annotations for assembly functions
In reply to Mark BrownIn an effort to clarify and simplify the annotation of assembly functions in the kernel new macros have been introduced. These replace ENTRY and ENDPROC and also add a new annotation for static functions which previously had no ENTRY equivalent. Update the annotations in the core kernel code to the new macros.
--- arch/arm64/kernel/cpu-reset.S | 4 +- arch/arm64/kernel/efi-rt-wrapper.S | 4 +- arch/arm64/kernel/entry-fpsimd.S | 20 ++++----- arch/arm64/kernel/hibernate-asm.S | 16 +++---- arch/arm64/kernel/hyp-stub.S | 20 ++++----- arch/arm64/kernel/probes/kprobes_trampoline.S | 4 +- arch/arm64/kernel/reloc_test_syms.S | 44 +++++++++---------- arch/arm64/kernel/relocate_kernel.S | 4 +- arch/arm64/kernel/sleep.S | 12 ++--- arch/arm64/kernel/smccc-call.S | 8 ++-- 10 files changed, 68 insertions(+), 68 deletions(-)
arch/arm64/kernel/cpu-reset.S +2 -2
@@ -29,7 +29,7 @@ * branch to what would be the reset vector. It must be executed with the * flat identity mapping. */ -ENTRY(__cpu_soft_restart) +SYM_CODE_START(__cpu_soft_restart) /* Clear sctlr_el1 flags. */ mrs x12, sctlr_el1 mov_q x13, SCTLR_ELx_FLAGS
@@ -47,6 +47,6 @@ ENTRY(__cpu_soft_restart) mov x1, x3 // arg1 mov x2, x4 // arg2 br x8 -ENDPROC(__cpu_soft_restart) +SYM_CODE_END(__cpu_soft_restart) .popsection
arch/arm64/kernel/efi-rt-wrapper.S +2 -2
@@ -5,7 +5,7 @@ #include <linux/linkage.h> -ENTRY(__efi_rt_asm_wrapper) +SYM_FUNC_START(__efi_rt_asm_wrapper) stp x29, x30, [sp, #-32]! mov x29, sp
@@ -35,4 +35,4 @@ ENTRY(__efi_rt_asm_wrapper) b.ne 0f ret 0: b efi_handle_corrupted_x18 // tail call -ENDPROC(__efi_rt_asm_wrapper) +SYM_FUNC_END(__efi_rt_asm_wrapper)
arch/arm64/kernel/entry-fpsimd.S +10 -10
@@ -16,34 +16,34 @@ * * x0 - pointer to struct fpsimd_state */ -ENTRY(fpsimd_save_state) +SYM_FUNC_START(fpsimd_save_state) fpsimd_save x0, 8 ret -ENDPROC(fpsimd_save_state) +SYM_FUNC_END(fpsimd_save_state) /* * Load the FP registers. * * x0 - pointer to struct fpsimd_state */ -ENTRY(fpsimd_load_state) +SYM_FUNC_START(fpsimd_load_state) fpsimd_restore x0, 8 ret -ENDPROC(fpsimd_load_state) +SYM_FUNC_END(fpsimd_load_state) #ifdef CONFIG_ARM64_SVE -ENTRY(sve_save_state) +SYM_FUNC_START(sve_save_state) sve_save 0, x1, 2 ret -ENDPROC(sve_save_state) +SYM_FUNC_END(sve_save_state) -ENTRY(sve_load_state) +SYM_FUNC_START(sve_load_state) sve_load 0, x1, x2, 3, x4 ret -ENDPROC(sve_load_state) +SYM_FUNC_END(sve_load_state) -ENTRY(sve_get_vl) +SYM_FUNC_START(sve_get_vl) _sve_rdvl 0, 1 ret -ENDPROC(sve_get_vl) +SYM_FUNC_END(sve_get_vl) #endif /* CONFIG_ARM64_SVE */
arch/arm64/kernel/hibernate-asm.S +8 -8
@@ -65,7 +65,7 @@ * x5: physical address of a zero page that remains zero after resume */ .pushsection ".hibernate_exit.text", "ax" -ENTRY(swsusp_arch_suspend_exit) +SYM_CODE_START(swsusp_arch_suspend_exit) /* * We execute from ttbr0, change ttbr1 to our copied linear map tables * with a break-before-make via the zero page
@@ -110,7 +110,7 @@ ENTRY(swsusp_arch_suspend_exit) cbz x24, 3f /* Do we need to re-initialise EL2? */ hvc #0 3: ret -ENDPROC(swsusp_arch_suspend_exit) +SYM_CODE_END(swsusp_arch_suspend_exit) /* * Restore the hyp stub.
@@ -119,15 +119,15 @@ ENDPROC(swsusp_arch_suspend_exit) * * x24: The physical address of __hyp_stub_vectors */ -el1_sync: +SYM_CODE_START_LOCAL(el1_sync) msr vbar_el2, x24 eret -ENDPROC(el1_sync) +SYM_CODE_END(el1_sync) .macro invalid_vector label -\label: +SYM_CODE_START_LOCAL(\label) b \label -ENDPROC(\label) +SYM_CODE_END(\label) .endm invalid_vector el2_sync_invalid
@@ -141,7 +141,7 @@ ENDPROC(\label) /* el2 vectors - switch el2 here while we restore the memory image. */ .align 11 -ENTRY(hibernate_el2_vectors) +SYM_CODE_START(hibernate_el2_vectors) ventry el2_sync_invalid // Synchronous EL2t ventry el2_irq_invalid // IRQ EL2t ventry el2_fiq_invalid // FIQ EL2t
@@ -161,6 +161,6 @@ ENTRY(hibernate_el2_vectors) ventry el1_irq_invalid // IRQ 32-bit EL1 ventry el1_fiq_invalid // FIQ 32-bit EL1 ventry el1_error_invalid // Error 32-bit EL1 -END(hibernate_el2_vectors) +SYM_CODE_END(hibernate_el2_vectors) .popsection
arch/arm64/kernel/hyp-stub.S +10 -10
@@ -21,7 +21,7 @@ .align 11 -ENTRY(__hyp_stub_vectors) +SYM_CODE_START(__hyp_stub_vectors) ventry el2_sync_invalid // Synchronous EL2t ventry el2_irq_invalid // IRQ EL2t ventry el2_fiq_invalid // FIQ EL2t
@@ -41,11 +41,11 @@ ENTRY(__hyp_stub_vectors) ventry el1_irq_invalid // IRQ 32-bit EL1 ventry el1_fiq_invalid // FIQ 32-bit EL1 ventry el1_error_invalid // Error 32-bit EL1 -ENDPROC(__hyp_stub_vectors) +SYM_CODE_END(__hyp_stub_vectors) .align 11 -el1_sync: +SYM_CODE_START_LOCAL(el1_sync) cmp x0, #HVC_SET_VECTORS b.ne 2f msr vbar_el2, x1
@@ -68,12 +68,12 @@ el1_sync: 9: mov x0, xzr eret -ENDPROC(el1_sync) +SYM_CODE_END(el1_sync) .macro invalid_vector label -\label: +SYM_CODE_START_LOCAL(\label) b \label -ENDPROC(\label) +SYM_CODE_END(\label) .endm invalid_vector el2_sync_invalid
@@ -106,15 +106,15 @@ ENDPROC(\label) * initialisation entry point. */ -ENTRY(__hyp_set_vectors) +SYM_FUNC_START(__hyp_set_vectors) mov x1, x0 mov x0, #HVC_SET_VECTORS hvc #0 ret -ENDPROC(__hyp_set_vectors) +SYM_FUNC_END(__hyp_set_vectors) -ENTRY(__hyp_reset_vectors) +SYM_FUNC_START(__hyp_reset_vectors) mov x0, #HVC_RESET_VECTORS hvc #0 ret -ENDPROC(__hyp_reset_vectors) +SYM_FUNC_END(__hyp_reset_vectors)
arch/arm64/kernel/probes/kprobes_trampoline.S +2 -2
@@ -61,7 +61,7 @@ ldp x28, x29, [sp, #S_X28] .endm -ENTRY(kretprobe_trampoline) +SYM_CODE_START(kretprobe_trampoline) sub sp, sp, #S_FRAME_SIZE save_all_base_regs
@@ -79,4 +79,4 @@ ENTRY(kretprobe_trampoline) add sp, sp, #S_FRAME_SIZE ret -ENDPROC(kretprobe_trampoline) +SYM_CODE_END(kretprobe_trampoline)
arch/arm64/kernel/reloc_test_syms.S +22 -22
103 lines not on this page · raw message
arch/arm64/kernel/relocate_kernel.S +2 -2
@@ -26,7 +26,7 @@ * control_code_page, a special page which has been set up to be preserved * during the copy operation. */ -ENTRY(arm64_relocate_new_kernel) +SYM_CODE_START(arm64_relocate_new_kernel) /* Setup the list loop variables. */ mov x18, x2 /* x18 = dtb address */
@@ -111,7 +111,7 @@ ENTRY(arm64_relocate_new_kernel) mov x3, xzr br x17 -ENDPROC(arm64_relocate_new_kernel) +SYM_CODE_END(arm64_relocate_new_kernel) .align 3 /* To keep the 64-bit values below naturally aligned. */
arch/arm64/kernel/sleep.S +6 -6
@@ -62,7 +62,7 @@ * * x0 = struct sleep_stack_data area */ -ENTRY(__cpu_suspend_enter) +SYM_FUNC_START(__cpu_suspend_enter) stp x29, lr, [x0, #SLEEP_STACK_DATA_CALLEE_REGS] stp x19, x20, [x0,#SLEEP_STACK_DATA_CALLEE_REGS+16] stp x21, x22, [x0,#SLEEP_STACK_DATA_CALLEE_REGS+32]
@@ -95,10 +95,10 @@ ENTRY(__cpu_suspend_enter) ldp x29, lr, [sp], #16 mov x0, #1 ret -ENDPROC(__cpu_suspend_enter) +SYM_FUNC_END(__cpu_suspend_enter) .pushsection ".idmap.text", "awx" -ENTRY(cpu_resume) +SYM_CODE_START(cpu_resume) bl el2_setup // if in EL2 drop to EL1 cleanly mov x0, #ARM64_CPU_RUNTIME bl __cpu_setup
@@ -107,11 +107,11 @@ ENTRY(cpu_resume) bl __enable_mmu ldr x8, =_cpu_resume br x8 -ENDPROC(cpu_resume) +SYM_CODE_END(cpu_resume) .ltorg .popsection -ENTRY(_cpu_resume) +SYM_FUNC_START(_cpu_resume) mrs x1, mpidr_el1 adr_l x8, mpidr_hash // x8 = struct mpidr_hash virt address
@@ -147,4 +147,4 @@ ENTRY(_cpu_resume) ldp x29, lr, [x29] mov x0, #0 ret -ENDPROC(_cpu_resume) +SYM_FUNC_END(_cpu_resume)
arch/arm64/kernel/smccc-call.S +4 -4
@@ -30,9 +30,9 @@ * unsigned long a6, unsigned long a7, struct arm_smccc_res *res, * struct arm_smccc_quirk *quirk) */ -ENTRY(__arm_smccc_smc) +SYM_FUNC_START(__arm_smccc_smc) SMCCC smc -ENDPROC(__arm_smccc_smc) +SYM_FUNC_END(__arm_smccc_smc) EXPORT_SYMBOL(__arm_smccc_smc) /*
@@ -41,7 +41,7 @@ EXPORT_SYMBOL(__arm_smccc_smc) * unsigned long a6, unsigned long a7, struct arm_smccc_res *res, * struct arm_smccc_quirk *quirk) */ -ENTRY(__arm_smccc_hvc) +SYM_FUNC_START(__arm_smccc_hvc) SMCCC hvc -ENDPROC(__arm_smccc_hvc) +SYM_FUNC_END(__arm_smccc_hvc) EXPORT_SYMBOL(__arm_smccc_hvc)
Signature · 7 lines
2.20.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v2 2/3] arm64: kernel: Convert to modern annotations for assembly functions
Quoted 7 lines · Mark Brown
In an effort to clarify and simplify the annotation of assembly functions in the kernel new macros have been introduced. These replace ENTRY and ENDPROC and also add a new annotation for static functions which previously had no ENTRY equivalent. Update the annotations in the core kernel code to the new macros.
Signed-off-by Mark Brown <[email protected]>
All the FUNC/CODE conversions look appropriate to me, so:
Mark.
Quoted 453 lines
--- arch/arm64/kernel/cpu-reset.S | 4 +- arch/arm64/kernel/efi-rt-wrapper.S | 4 +- arch/arm64/kernel/entry-fpsimd.S | 20 ++++----- arch/arm64/kernel/hibernate-asm.S | 16 +++---- arch/arm64/kernel/hyp-stub.S | 20 ++++----- arch/arm64/kernel/probes/kprobes_trampoline.S | 4 +- arch/arm64/kernel/reloc_test_syms.S | 44 +++++++++---------- arch/arm64/kernel/relocate_kernel.S | 4 +- arch/arm64/kernel/sleep.S | 12 ++--- arch/arm64/kernel/smccc-call.S | 8 ++-- 10 files changed, 68 insertions(+), 68 deletions(-)arch/arm64/kernel/cpu-reset.S +2
-2@@ -29,7 +29,7 @@ * branch to what would be the reset vector. It must be executed with the * flat identity mapping. */ -ENTRY(__cpu_soft_restart) +SYM_CODE_START(__cpu_soft_restart) /* Clear sctlr_el1 flags. */ mrs x12, sctlr_el1 mov_q x13, SCTLR_ELx_FLAGS@@ -47,6 +47,6 @@ ENTRY(__cpu_soft_restart) mov x1, x3 // arg1 mov x2, x4 // arg2 br x8 -ENDPROC(__cpu_soft_restart) +SYM_CODE_END(__cpu_soft_restart) .popsectionarch/arm64/kernel/efi-rt-wrapper.S +2
-2@@ -5,7 +5,7 @@ #include <linux/linkage.h> -ENTRY(__efi_rt_asm_wrapper) +SYM_FUNC_START(__efi_rt_asm_wrapper) stp x29, x30, [sp, #-32]! mov x29, sp@@ -35,4 +35,4 @@ ENTRY(__efi_rt_asm_wrapper) b.ne 0f ret 0: b efi_handle_corrupted_x18 // tail call -ENDPROC(__efi_rt_asm_wrapper) +SYM_FUNC_END(__efi_rt_asm_wrapper)arch/arm64/kernel/entry-fpsimd.S +10
-10@@ -16,34 +16,34 @@ * * x0 - pointer to struct fpsimd_state */ -ENTRY(fpsimd_save_state) +SYM_FUNC_START(fpsimd_save_state) fpsimd_save x0, 8 ret -ENDPROC(fpsimd_save_state) +SYM_FUNC_END(fpsimd_save_state) /* * Load the FP registers. * * x0 - pointer to struct fpsimd_state */ -ENTRY(fpsimd_load_state) +SYM_FUNC_START(fpsimd_load_state) fpsimd_restore x0, 8 ret -ENDPROC(fpsimd_load_state) +SYM_FUNC_END(fpsimd_load_state) #ifdef CONFIG_ARM64_SVE -ENTRY(sve_save_state) +SYM_FUNC_START(sve_save_state) sve_save 0, x1, 2 ret -ENDPROC(sve_save_state) +SYM_FUNC_END(sve_save_state) -ENTRY(sve_load_state) +SYM_FUNC_START(sve_load_state) sve_load 0, x1, x2, 3, x4 ret -ENDPROC(sve_load_state) +SYM_FUNC_END(sve_load_state) -ENTRY(sve_get_vl) +SYM_FUNC_START(sve_get_vl) _sve_rdvl 0, 1 ret -ENDPROC(sve_get_vl) +SYM_FUNC_END(sve_get_vl) #endif /* CONFIG_ARM64_SVE */arch/arm64/kernel/hibernate-asm.S +8
-8@@ -65,7 +65,7 @@ * x5: physical address of a zero page that remains zero after resume */ .pushsection ".hibernate_exit.text", "ax" -ENTRY(swsusp_arch_suspend_exit) +SYM_CODE_START(swsusp_arch_suspend_exit) /* * We execute from ttbr0, change ttbr1 to our copied linear map tables * with a break-before-make via the zero page@@ -110,7 +110,7 @@ ENTRY(swsusp_arch_suspend_exit) cbz x24, 3f /* Do we need to re-initialise EL2? */ hvc #0 3: ret -ENDPROC(swsusp_arch_suspend_exit) +SYM_CODE_END(swsusp_arch_suspend_exit) /* * Restore the hyp stub.@@ -119,15 +119,15 @@ ENDPROC(swsusp_arch_suspend_exit) * * x24: The physical address of __hyp_stub_vectors */ -el1_sync: +SYM_CODE_START_LOCAL(el1_sync) msr vbar_el2, x24 eret -ENDPROC(el1_sync) +SYM_CODE_END(el1_sync) .macro invalid_vector label -\label: +SYM_CODE_START_LOCAL(\label) b \label -ENDPROC(\label) +SYM_CODE_END(\label) .endm invalid_vector el2_sync_invalid@@ -141,7 +141,7 @@ ENDPROC(\label) /* el2 vectors - switch el2 here while we restore the memory image. */ .align 11 -ENTRY(hibernate_el2_vectors) +SYM_CODE_START(hibernate_el2_vectors) ventry el2_sync_invalid // Synchronous EL2t ventry el2_irq_invalid // IRQ EL2t ventry el2_fiq_invalid // FIQ EL2t@@ -161,6 +161,6 @@ ENTRY(hibernate_el2_vectors) ventry el1_irq_invalid // IRQ 32-bit EL1 ventry el1_fiq_invalid // FIQ 32-bit EL1 ventry el1_error_invalid // Error 32-bit EL1 -END(hibernate_el2_vectors) +SYM_CODE_END(hibernate_el2_vectors) .popsectionarch/arm64/kernel/hyp-stub.S +10
-10@@ -21,7 +21,7 @@ .align 11 -ENTRY(__hyp_stub_vectors) +SYM_CODE_START(__hyp_stub_vectors) ventry el2_sync_invalid // Synchronous EL2t ventry el2_irq_invalid // IRQ EL2t ventry el2_fiq_invalid // FIQ EL2t@@ -41,11 +41,11 @@ ENTRY(__hyp_stub_vectors) ventry el1_irq_invalid // IRQ 32-bit EL1 ventry el1_fiq_invalid // FIQ 32-bit EL1 ventry el1_error_invalid // Error 32-bit EL1 -ENDPROC(__hyp_stub_vectors) +SYM_CODE_END(__hyp_stub_vectors) .align 11 -el1_sync: +SYM_CODE_START_LOCAL(el1_sync) cmp x0, #HVC_SET_VECTORS b.ne 2f msr vbar_el2, x1@@ -68,12 +68,12 @@ el1_sync: 9: mov x0, xzr eret -ENDPROC(el1_sync) +SYM_CODE_END(el1_sync) .macro invalid_vector label -\label: +SYM_CODE_START_LOCAL(\label) b \label -ENDPROC(\label) +SYM_CODE_END(\label) .endm invalid_vector el2_sync_invalid@@ -106,15 +106,15 @@ ENDPROC(\label) * initialisation entry point. */ -ENTRY(__hyp_set_vectors) +SYM_FUNC_START(__hyp_set_vectors) mov x1, x0 mov x0, #HVC_SET_VECTORS hvc #0 ret -ENDPROC(__hyp_set_vectors) +SYM_FUNC_END(__hyp_set_vectors) -ENTRY(__hyp_reset_vectors) +SYM_FUNC_START(__hyp_reset_vectors) mov x0, #HVC_RESET_VECTORS hvc #0 ret -ENDPROC(__hyp_reset_vectors) +SYM_FUNC_END(__hyp_reset_vectors)arch/arm64/kernel/probes/kprobes_trampoline.S +2
-2@@ -61,7 +61,7 @@ ldp x28, x29, [sp, #S_X28] .endm -ENTRY(kretprobe_trampoline) +SYM_CODE_START(kretprobe_trampoline) sub sp, sp, #S_FRAME_SIZE save_all_base_regs@@ -79,4 +79,4 @@ ENTRY(kretprobe_trampoline) add sp, sp, #S_FRAME_SIZE ret -ENDPROC(kretprobe_trampoline) +SYM_CODE_END(kretprobe_trampoline)arch/arm64/kernel/reloc_test_syms.S +22
-22@@ -5,81 +5,81 @@ #include <linux/linkage.h> -ENTRY(absolute_data64) +SYM_FUNC_START(absolute_data64) ldr x0, 0f ret 0: .quad sym64_abs -ENDPROC(absolute_data64) +SYM_FUNC_END(absolute_data64) -ENTRY(absolute_data32) +SYM_FUNC_START(absolute_data32) ldr w0, 0f ret 0: .long sym32_abs -ENDPROC(absolute_data32) +SYM_FUNC_END(absolute_data32) -ENTRY(absolute_data16) +SYM_FUNC_START(absolute_data16) adr x0, 0f ldrh w0, [x0] ret 0: .short sym16_abs, 0 -ENDPROC(absolute_data16) +SYM_FUNC_END(absolute_data16) -ENTRY(signed_movw) +SYM_FUNC_START(signed_movw) movz x0, #:abs_g2_s:sym64_abs movk x0, #:abs_g1_nc:sym64_abs movk x0, #:abs_g0_nc:sym64_abs ret -ENDPROC(signed_movw) +SYM_FUNC_END(signed_movw) -ENTRY(unsigned_movw) +SYM_FUNC_START(unsigned_movw) movz x0, #:abs_g3:sym64_abs movk x0, #:abs_g2_nc:sym64_abs movk x0, #:abs_g1_nc:sym64_abs movk x0, #:abs_g0_nc:sym64_abs ret -ENDPROC(unsigned_movw) +SYM_FUNC_END(unsigned_movw) .align 12 .space 0xff8 -ENTRY(relative_adrp) +SYM_FUNC_START(relative_adrp) adrp x0, sym64_rel add x0, x0, #:lo12:sym64_rel ret -ENDPROC(relative_adrp) +SYM_FUNC_END(relative_adrp) .align 12 .space 0xffc -ENTRY(relative_adrp_far) +SYM_FUNC_START(relative_adrp_far) adrp x0, memstart_addr add x0, x0, #:lo12:memstart_addr ret -ENDPROC(relative_adrp_far) +SYM_FUNC_END(relative_adrp_far) -ENTRY(relative_adr) +SYM_FUNC_START(relative_adr) adr x0, sym64_rel ret -ENDPROC(relative_adr) +SYM_FUNC_END(relative_adr) -ENTRY(relative_data64) +SYM_FUNC_START(relative_data64) adr x1, 0f ldr x0, [x1] add x0, x0, x1 ret 0: .quad sym64_rel - . -ENDPROC(relative_data64) +SYM_FUNC_END(relative_data64) -ENTRY(relative_data32) +SYM_FUNC_START(relative_data32) adr x1, 0f ldr w0, [x1] add x0, x0, x1 ret 0: .long sym64_rel - . -ENDPROC(relative_data32) +SYM_FUNC_END(relative_data32) -ENTRY(relative_data16) +SYM_FUNC_START(relative_data16) adr x1, 0f ldrsh w0, [x1] add x0, x0, x1 ret 0: .short sym64_rel - ., 0 -ENDPROC(relative_data16) +SYM_FUNC_END(relative_data16)arch/arm64/kernel/relocate_kernel.S +2
-2@@ -26,7 +26,7 @@ * control_code_page, a special page which has been set up to be preserved * during the copy operation. */ -ENTRY(arm64_relocate_new_kernel) +SYM_CODE_START(arm64_relocate_new_kernel) /* Setup the list loop variables. */ mov x18, x2 /* x18 = dtb address */@@ -111,7 +111,7 @@ ENTRY(arm64_relocate_new_kernel) mov x3, xzr br x17 -ENDPROC(arm64_relocate_new_kernel) +SYM_CODE_END(arm64_relocate_new_kernel) .align 3 /* To keep the 64-bit values below naturally aligned. */arch/arm64/kernel/sleep.S +6
-6@@ -62,7 +62,7 @@ * * x0 = struct sleep_stack_data area */ -ENTRY(__cpu_suspend_enter) +SYM_FUNC_START(__cpu_suspend_enter) stp x29, lr, [x0, #SLEEP_STACK_DATA_CALLEE_REGS] stp x19, x20, [x0,#SLEEP_STACK_DATA_CALLEE_REGS+16] stp x21, x22, [x0,#SLEEP_STACK_DATA_CALLEE_REGS+32]@@ -95,10 +95,10 @@ ENTRY(__cpu_suspend_enter) ldp x29, lr, [sp], #16 mov x0, #1 ret -ENDPROC(__cpu_suspend_enter) +SYM_FUNC_END(__cpu_suspend_enter) .pushsection ".idmap.text", "awx" -ENTRY(cpu_resume) +SYM_CODE_START(cpu_resume) bl el2_setup // if in EL2 drop to EL1 cleanly mov x0, #ARM64_CPU_RUNTIME bl __cpu_setup@@ -107,11 +107,11 @@ ENTRY(cpu_resume) bl __enable_mmu ldr x8, =_cpu_resume br x8 -ENDPROC(cpu_resume) +SYM_CODE_END(cpu_resume) .ltorg .popsection -ENTRY(_cpu_resume) +SYM_FUNC_START(_cpu_resume) mrs x1, mpidr_el1 adr_l x8, mpidr_hash // x8 = struct mpidr_hash virt address@@ -147,4 +147,4 @@ ENTRY(_cpu_resume) ldp x29, lr, [x29] mov x0, #0 ret -ENDPROC(_cpu_resume) +SYM_FUNC_END(_cpu_resume)arch/arm64/kernel/smccc-call.S +4
-4@@ -30,9 +30,9 @@ * unsigned long a6, unsigned long a7, struct arm_smccc_res *res, * struct arm_smccc_quirk *quirk) */ -ENTRY(__arm_smccc_smc) +SYM_FUNC_START(__arm_smccc_smc) SMCCC smc -ENDPROC(__arm_smccc_smc) +SYM_FUNC_END(__arm_smccc_smc) EXPORT_SYMBOL(__arm_smccc_smc) /*@@ -41,7 +41,7 @@ EXPORT_SYMBOL(__arm_smccc_smc) * unsigned long a6, unsigned long a7, struct arm_smccc_res *res, * struct arm_smccc_quirk *quirk) */ -ENTRY(__arm_smccc_hvc) +SYM_FUNC_START(__arm_smccc_hvc) SMCCC hvc -ENDPROC(__arm_smccc_hvc) +SYM_FUNC_END(__arm_smccc_hvc) EXPORT_SYMBOL(__arm_smccc_hvc)Signature · 7 lines
2.20.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v2 3/3 arm64: Disable old style assembly annotations
In reply to Mark BrownNow that we have converted arm64 over to the new style SYM_ assembler annotations select ARCH_USE_SYM_ANNOTATIONS so the old macros aren't available and we don't regress.
--- arch/arm64/Kconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm64/Kconfig +1 -0
@@ -66,6 +66,7 @@ config ARM64 select ARCH_USE_GNU_PROPERTY select ARCH_USE_QUEUED_RWLOCKS select ARCH_USE_QUEUED_SPINLOCKS + select ARCH_USE_SYM_ANNOTATIONS select ARCH_SUPPORTS_MEMORY_FAILURE select ARCH_SUPPORTS_ATOMIC_RMW select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && (GCC_VERSION >= 50000 || CC_IS_CLANG)
Signature · 7 lines
2.20.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v2 3/3] arm64: Disable old style assembly annotations
Quoted 5 lines · Mark Brown
Now that we have converted arm64 over to the new style
SYM_assembler annotations selectARCH_USE_SYM_ANNOTATIONSso the old macros aren't available and we don't regress.Signed-off-by Mark Brown <[email protected]>
Mark.
Quoted 24 lines
--- arch/arm64/Kconfig | 1 + 1 file changed, 1 insertion(+)arch/arm64/Kconfig +1
-0@@ -66,6 +66,7 @@ config ARM64 select ARCH_USE_GNU_PROPERTY select ARCH_USE_QUEUED_RWLOCKS select ARCH_USE_QUEUED_SPINLOCKS + select ARCH_USE_SYM_ANNOTATIONS select ARCH_SUPPORTS_MEMORY_FAILURE select ARCH_SUPPORTS_ATOMIC_RMW select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && (GCC_VERSION >= 50000 || CC_IS_CLANG)Signature · 7 lines
2.20.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 6 lines · Mark Brown
This series finishes up the conversion of arm64 to use modern assembler annotations. The second patch selects a symbol added by
2ce0d7f9766f0e49b(x86/asm: Provide aKconfigsymbol for disabling old assembly annotations) in -next to ensure that we don't regress and start using old annotations again.
Quoted 6 lines
This will be needed for BTI kernel support so it'd be good if they could end up on that branch, either through merging a topic branch or otherwise. The patches are generated against a merge of v5.7-rc3 and for-next/bti-user in the arm64 tree.
[...]
Applied to arm64 (for-next/asm), thanks!
[1/3] arm64: entry: Refactor and modernise annotation for ret_to_user
https://git.kernel.org/arm64/c/06607c7e93f2 [2/3] arm64: kernel: Convert to modern annotations for assembly functions https://git.kernel.org/arm64/c/0343a7e46362 [3/3] arm64: Disable old style assembly annotations https://git.kernel.org/arm64/c/50479d58eaa3
Cheers,
Signature · 9 lines
Will https://fixes.arm64.dev https://next.arm64.dev _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel