Skip to contentSkip to conversation

misc: fuse: Update imx8 fuse driver for 8QM

PATCH New Peng Fan 2 participants 4 messages May 3, 2020 – May 11, 2020

Subsystems (2)
lore
Share & tools
lore

Peng Fan

author
#0 lore raw

PATCH 1/2 misc: fuse: Update imx8 fuse driver for 8QM

From: Ye Li <[email protected]>

Add the second ECC fuse area for 8QM which is different with 8QXP

---
 drivers/misc/imx8/fuse.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/misc/imx8/fuse.c +5 -0
index 1309215d4d..4d7f2f524d 100644
@@ -15,8 +15,13 @@ DECLARE_GLOBAL_DATA_PTR;
 #define FSL_ECC_WORD_START_1	 0x10
 #define FSL_ECC_WORD_END_1	 0x10F
 
+#ifdef CONFIG_IMX8QM
+#define FSL_ECC_WORD_START_2	 0x1A0
+#define FSL_ECC_WORD_END_2	 0x1FF
+#elif defined(CONFIG_IMX8QXP)
 #define FSL_ECC_WORD_START_2	 0x220
 #define FSL_ECC_WORD_END_2	 0x31F
+#endif
 
 #define FSL_QXP_FUSE_GAP_START	 0x110
 #define FSL_QXP_FUSE_GAP_END	 0x21F
Signature · 1 line
2.16.4
author
#1 lore raw

PATCH 2/2 misc: scu: Increase the timeout for MU communication

From: Ye Li <[email protected]>

When power on some sources in Video system, current timeout 10ms is too short and returns before SCU response. So increase the timeout to 1s.

---
 drivers/misc/imx8/scu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/misc/imx8/scu.c +1 -1
index a7654a7817..6916b754f6 100644
@@ -74,7 +74,7 @@ static int mu_hal_receivemsg(struct mu_type *base, u32 reg_index, u32 *msg)
 	assert(reg_index < MU_TR_COUNT);
 
 	/* Wait RX register to be full. */
-	ret = readl_poll_timeout(&base->sr, val, val & mask, 10000);
+	ret = readl_poll_timeout(&base->sr, val, val & mask, 1000000);
 	if (ret < 0) {
 		printf("%s timeout\n", __func__);
 		return -ETIMEDOUT;
Signature · 1 line
2.16.4
#2 lore raw

PATCH 2/2 misc: scu: Increase the timeout for MU communication

Quoted 6 lines

From: Ye Li <[email protected]>
When power on some sources in Video system, current timeout 10ms is too short and returns before SCU response. So increase the timeout to 1s.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#3 lore raw

PATCH 1/2 misc: fuse: Update imx8 fuse driver for 8QM

In reply to Peng Fan
Quoted 4 lines

From: Ye Li <[email protected]>
Add the second ECC fuse area for 8QM which is different with 8QXP

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================