Skip to contentSkip to conversation

spi: fsl_dspi: Introduce DT bindings for CS-to-SCK and SCK-to-CS delays

PATCH New Vladimir Oltean 1 participant 1 message May 4, 2020 SPI

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 spi: fsl_dspi: Introduce DT bindings for CS-to-SCK and SCK-to-CS delays

From: Vladimir Oltean <[email protected]>

Communication with some SPI slaves just won't cut it if these delays (before the beginning, and after the end of a transfer) are not added to the Chip Select signal.

These are a straight copy from Linux:
Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt drivers/spi/spi-fsl-dspi.c

---
 doc/device-tree-bindings/spi/spi-mcf-dspi.txt |  4 ++
 drivers/spi/fsl_dspi.c                        | 54 ++++++++++++++++++-
 include/fsl_dspi.h                            |  1 +
 3 files changed, 58 insertions(+), 1 deletion(-)
doc/device-tree-bindings/spi/spi-mcf-dspi.txt +4 -0
index 860eb8ac8526..4684d7846a99 100644
@@ -13,6 +13,10 @@ Optional properties:
 - ctar-params: CTAR0 to 7 register configuration, as an array
   of 8 integer fields for each register, where each register
   is defined as: <fmsz, pcssck, pasc, pdt, cssck, asc, dt, br>.
+- fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip
+  select and the start of clock signal, at the start of a transfer.
+- fsl,spi-sck-cs-delay: a delay in nanoseconds between stopping the clock
+  signal and deactivating chip select, at the end of a transfer.
 
 Example:
 
drivers/spi/fsl_dspi.c +53 -1

84 lines not on this page · raw message

include/fsl_dspi.h +1 -0
index 114f63bce374..4fec83549e1f 100644
@@ -94,6 +94,7 @@ struct dspi {
 #define DSPI_CTAR_ASC(x)		(((x) & 0x0F) << 8)
 #define DSPI_CTAR_DT(x)			(((x) & 0x0F) << 4)
 #define DSPI_CTAR_BR(x)			((x) & 0x0F)
+#define DSPI_CTAR_SCALE_BITS		0xf
 
 /* Status */
 #define DSPI_SR_TCF			0x80000000
Signature · 1 line
2.17.1