Skip to contentSkip to conversation

memcg: oom: ignore oom warnings from memory.max

PATCH In review Shakeel Butt 6 participants 36 messages Apr 30, 2020 – May 5, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 memcg: oom: ignore oom warnings from memory.max

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

Deleting a memcg does not reclaim memory from it and the memory can linger till there is a memory pressure. One normal way to proactively reclaim such memory is to set memory.max to 0 just before deleting the memcg. However if some of the memcg's memory is pinned by others, this operation can trigger an oom-kill without any process and thus can log a lot un-needed warnings. So, ignore all such warnings from memory.max.

---
 include/linux/oom.h | 3 +++
 mm/memcontrol.c     | 9 +++++----
 mm/oom_kill.c       | 2 +-
 3 files changed, 9 insertions(+), 5 deletions(-)
include/linux/oom.h +3 -0
index c696c265f019..6345dc55df64 100644
@@ -52,6 +52,9 @@ struct oom_control {
 
 	/* Used to print the constraint info. */
 	enum oom_constraint constraint;
+
+	/* Do not warn even if there is no process to be killed. */
+	bool no_warn;
 };
 
 extern struct mutex oom_lock;
mm/memcontrol.c +5 -4
index 317dbbaac603..a1f00d9b9bb0 100644
@@ -1571,7 +1571,7 @@ unsigned long mem_cgroup_size(struct mem_cgroup *memcg)
 }
 
 static bool mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
-				     int order)
+				     int order, bool no_warn)
 {
 	struct oom_control oc = {
 		.zonelist = NULL,
@@ -1579,6 +1579,7 @@ static bool mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
 		.memcg = memcg,
 		.gfp_mask = gfp_mask,
 		.order = order,
+		.no_warn = no_warn,
 	};
 	bool ret;
 
@@ -1821,7 +1822,7 @@ static enum oom_status mem_cgroup_oom(struct mem_cgroup *memcg, gfp_t mask, int
 		mem_cgroup_oom_notify(memcg);
 
 	mem_cgroup_unmark_under_oom(memcg);
-	if (mem_cgroup_out_of_memory(memcg, mask, order))
+	if (mem_cgroup_out_of_memory(memcg, mask, order, false))
 		ret = OOM_SUCCESS;
 	else
 		ret = OOM_FAILED;
@@ -1880,7 +1881,7 @@ bool mem_cgroup_oom_synchronize(bool handle)
 		mem_cgroup_unmark_under_oom(memcg);
 		finish_wait(&memcg_oom_waitq, &owait.wait);
 		mem_cgroup_out_of_memory(memcg, current->memcg_oom_gfp_mask,
-					 current->memcg_oom_order);
+					 current->memcg_oom_order, false);
 	} else {
 		schedule();
 		mem_cgroup_unmark_under_oom(memcg);
@@ -6106,7 +6107,7 @@ static ssize_t memory_max_write(struct kernfs_open_file *of,
 		}
 
 		memcg_memory_event(memcg, MEMCG_OOM);
-		if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0))
+		if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0, true))
 			break;
 	}
 
mm/oom_kill.c +1 -1
index 463b3d74a64a..5ace39f6fe1e 100644
@@ -1098,7 +1098,7 @@ bool out_of_memory(struct oom_control *oc)
 
 	select_bad_process(oc);
 	/* Found nothing?!?! */
-	if (!oc->chosen) {
+	if (!oc->chosen && !oc->no_warn) {
 		dump_header(oc, NULL);
 		pr_warn("Out of memory and no killable processes...\n");
 		/*
Signature · 1 line
2.26.2.526.g744177e7f7-goog
#1 lore raw

Hello, Shakeel!

Quoted 3 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

Makes total sense to me.

Quoted 20 lines

Deleting a memcg does not reclaim memory from it and the memory can linger till there is a memory pressure. One normal way to proactively reclaim such memory is to set memory.max to 0 just before deleting the memcg. However if some of the memcg's memory is pinned by others, this operation can trigger an oom-kill without any process and thus can log a lot un-needed warnings. So, ignore all such warnings from memory.max.

---
 include/linux/oom.h | 3 +++
 mm/memcontrol.c     | 9 +++++----
 mm/oom_kill.c       | 2 +-
 3 files changed, 9 insertions(+), 5 deletions(-)
include/linux/oom.h +0 -0
index c696c265f019..6345dc55df64 100644

include/linux/oom.h struct oom_control { · line 57

Quoted 6 lines
include/linux/oom.h +3 -0
@@ -52,6 +52,9 @@ struct oom_control {
 
 	/* Used to print the constraint info. */
 	enum oom_constraint constraint;
+
+	/* Do not warn even if there is no process to be killed. */
+	bool no_warn;

I'd invert it to warn. Or maybe even warn_on_no_proc?

Quoted 43 lines
include/linux/oom.h +0 -0
 };
 
 extern struct mutex oom_lock;
mm/memcontrol.c +4 -3
index 317dbbaac603..a1f00d9b9bb0 100644
@@ -1571,7 +1571,7 @@ unsigned long mem_cgroup_size(struct mem_cgroup *memcg)
 }
 
 static bool mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
-				     int order)
+				     int order, bool no_warn)
 {
 	struct oom_control oc = {
 		.zonelist = NULL,
@@ -1579,6 +1579,7 @@ static bool mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
 		.memcg = memcg,
 		.gfp_mask = gfp_mask,
 		.order = order,
+		.no_warn = no_warn,
 	};
 	bool ret;
 
@@ -1821,7 +1822,7 @@ static enum oom_status mem_cgroup_oom(struct mem_cgroup *memcg, gfp_t mask, int
 		mem_cgroup_oom_notify(memcg);
 
 	mem_cgroup_unmark_under_oom(memcg);
-	if (mem_cgroup_out_of_memory(memcg, mask, order))
+	if (mem_cgroup_out_of_memory(memcg, mask, order, false))
 		ret = OOM_SUCCESS;
 	else
 		ret = OOM_FAILED;
@@ -1880,7 +1881,7 @@ bool mem_cgroup_oom_synchronize(bool handle)
 		mem_cgroup_unmark_under_oom(memcg);
 		finish_wait(&memcg_oom_waitq, &owait.wait);
 		mem_cgroup_out_of_memory(memcg, current->memcg_oom_gfp_mask,
-					 current->memcg_oom_order);
+					 current->memcg_oom_order, false);
 	} else {
 		schedule();
 		mem_cgroup_unmark_under_oom(memcg);

mm/memcontrol.c static ssize_t memory_max_write(struct kernfs_open_file *of, · line 6110

Quoted 5 lines
mm/memcontrol.c +1 -1
@@ -6106,7 +6107,7 @@ static ssize_t memory_max_write(struct kernfs_open_file *of,
 		}
 
 		memcg_memory_event(memcg, MEMCG_OOM);
-		if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0))
+		if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0, true))

I wonder if we can handle it automatically from the oom_killer side? We can suppress warnings if oc->memcg is set and the cgroup scanning showed that there are no belonging processes?

Thanks!

maintainer
#2 lore raw
Quoted 11 lines · Roman Gushchin

mm/memcontrol.c static ssize_t memory_max_write(struct kernfs_open_file *of, · line 6110

Quoted 6 lines · Shakeel Butt
mm/memcontrol.c +1 -1
@@ -6106,7 +6107,7 @@ static ssize_t memory_max_write(struct kernfs_open_file *of,
 		}
 
 		memcg_memory_event(memcg, MEMCG_OOM);
-		if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0))
+		if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0, true))

I wonder if we can handle it automatically from the oom_killer side? We can suppress warnings if oc->memcg is set and the cgroup scanning showed that there are no belonging processes?

Note that we do remote charging for certain consumers, where memory gets charged from the outside of the cgroup.

We would want to know if these cause OOMs on an empty cgroup, rather than force-charge the allocations quietly.

#3 lore raw
Quoted 13 lines · Johannes Weiner
Quoted 11 lines · Roman Gushchin

mm/memcontrol.c static ssize_t memory_max_write(struct kernfs_open_file *of, · line 6110

Quoted 6 lines · Shakeel Butt
mm/memcontrol.c +1 -1
@@ -6106,7 +6107,7 @@ static ssize_t memory_max_write(struct kernfs_open_file *of,
 		}
 
 		memcg_memory_event(memcg, MEMCG_OOM);
-		if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0))
+		if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0, true))

I wonder if we can handle it automatically from the oom_killer side? We can suppress warnings if oc->memcg is set and the cgroup scanning showed that there are no belonging processes?

Quoted 6 lines

Note that we do remote charging for certain consumers, where memory gets charged from the outside of the cgroup.

We would want to know if these cause OOMs on an empty cgroup, rather than force-charge the allocations quietly.

Yeah, good point.

#4 lore raw
In reply to Roman Gushchin
Quoted 31 lines · Roman Gushchin

Hello, Shakeel!

Quoted 3 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

Makes total sense to me.

Quoted 21 lines

Deleting a memcg does not reclaim memory from it and the memory can linger till there is a memory pressure. One normal way to proactively reclaim such memory is to set memory.max to 0 just before deleting the memcg. However if some of the memcg's memory is pinned by others, this operation can trigger an oom-kill without any process and thus can log a lot un-needed warnings. So, ignore all such warnings from memory.max.

---
 include/linux/oom.h | 3 +++
 mm/memcontrol.c     | 9 +++++----
 mm/oom_kill.c       | 2 +-
 3 files changed, 9 insertions(+), 5 deletions(-)
include/linux/oom.h +0 -0
index c696c265f019..6345dc55df64 100644
@@ -52,6 +52,9 @@ struct oom_control {
 
Quoted 8 lines

include/linux/oom.h struct oom_control { · line 57

Quoted 5 lines
include/linux/oom.h +3 -0
      /* Used to print the constraint info. */
      enum oom_constraint constraint;
+
+     /* Do not warn even if there is no process to be killed. */
+     bool no_warn;

I'd invert it to warn. Or maybe even warn_on_no_proc?

Sure.

Quoted 45 lines
Quoted 45 lines
include/linux/oom.h +0 -0
 };
 
 extern struct mutex oom_lock;
mm/memcontrol.c +4 -3
index 317dbbaac603..a1f00d9b9bb0 100644
@@ -1571,7 +1571,7 @@ unsigned long mem_cgroup_size(struct mem_cgroup *memcg)
 }
 
 static bool mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
-                                  int order)
+                                  int order, bool no_warn)
 {
      struct oom_control oc = {
              .zonelist = NULL,
@@ -1579,6 +1579,7 @@ static bool mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
              .memcg = memcg,
              .gfp_mask = gfp_mask,
              .order = order,
+             .no_warn = no_warn,
      };
      bool ret;
 
@@ -1821,7 +1822,7 @@ static enum oom_status mem_cgroup_oom(struct mem_cgroup *memcg, gfp_t mask, int
              mem_cgroup_oom_notify(memcg);
 
      mem_cgroup_unmark_under_oom(memcg);
-     if (mem_cgroup_out_of_memory(memcg, mask, order))
+     if (mem_cgroup_out_of_memory(memcg, mask, order, false))
              ret = OOM_SUCCESS;
      else
              ret = OOM_FAILED;
@@ -1880,7 +1881,7 @@ bool mem_cgroup_oom_synchronize(bool handle)
              mem_cgroup_unmark_under_oom(memcg);
              finish_wait(&memcg_oom_waitq, &owait.wait);
              mem_cgroup_out_of_memory(memcg, current->memcg_oom_gfp_mask,
-                                      current->memcg_oom_order);
+                                      current->memcg_oom_order, false);
      } else {
              schedule();
              mem_cgroup_unmark_under_oom(memcg);
@@ -6106,7 +6107,7 @@ static ssize_t memory_max_write(struct kernfs_open_file *of,
              }
 
Quoted 8 lines

mm/memcontrol.c static ssize_t memory_max_write(struct kernfs_open_file *of, · line 6110

Quoted 3 lines
mm/memcontrol.c +1 -1
              memcg_memory_event(memcg, MEMCG_OOM);
-             if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0))
+             if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0, true))

I wonder if we can handle it automatically from the oom_killer side? We can suppress warnings if oc->memcg is set and the cgroup scanning showed that there are no belonging processes?

What about the charging path? Do we not want such warnings from charging paths? It might be due to some misconfiguration.

maintainer
#5 lore raw
In reply to Shakeel Butt
Quoted 10 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

Deleting a memcg does not reclaim memory from it and the memory can linger till there is a memory pressure. One normal way to proactively reclaim such memory is to set memory.max to 0 just before deleting the memcg. However if some of the memcg's memory is pinned by others, this operation can trigger an oom-kill without any process and thus can log a lot un-needed warnings. So, ignore all such warnings from memory.max.

Can't you set memory.high=0 instead? It does the reclaim portion of memory.max, without the actual OOM killing that causes you problems.

#6 lore raw
Quoted 13 lines · Johannes Weiner
Quoted 10 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

Deleting a memcg does not reclaim memory from it and the memory can linger till there is a memory pressure. One normal way to proactively reclaim such memory is to set memory.max to 0 just before deleting the memcg. However if some of the memcg's memory is pinned by others, this operation can trigger an oom-kill without any process and thus can log a lot un-needed warnings. So, ignore all such warnings from memory.max.

Quoted 2 lines

Can't you set memory.high=0 instead? It does the reclaim portion of memory.max, without the actual OOM killing that causes you problems.

Yes that would work but remote charging concerns me. Remote charging can still happen after the memcg is offlined and at the moment, high reclaim does not work for remote memcg and the usage can go till max or global pressure. This is most probably a misconfiguration and we might not receive the warnings in the log ever. Setting memory.max to 0 will definitely give such warnings.

maintainer
#7 lore raw
Quoted 17 lines · Shakeel Butt
Quoted 13 lines · Johannes Weiner
Quoted 10 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

Deleting a memcg does not reclaim memory from it and the memory can linger till there is a memory pressure. One normal way to proactively reclaim such memory is to set memory.max to 0 just before deleting the memcg. However if some of the memcg's memory is pinned by others, this operation can trigger an oom-kill without any process and thus can log a lot un-needed warnings. So, ignore all such warnings from memory.max.

Quoted 2 lines

Can't you set memory.high=0 instead? It does the reclaim portion of memory.max, without the actual OOM killing that causes you problems.

Quoted 6 lines

Yes that would work but remote charging concerns me. Remote charging can still happen after the memcg is offlined and at the moment, high reclaim does not work for remote memcg and the usage can go till max or global pressure. This is most probably a misconfiguration and we might not receive the warnings in the log ever. Setting memory.max to 0 will definitely give such warnings.

Can we add a warning for the remote charging on dead memcgs?

Signature · 2 lines
Michal Hocko
SUSE Labs
#8 lore raw
Quoted 19 lines · Michal Hocko
Quoted 17 lines · Shakeel Butt
Quoted 15 lines · Johannes Weiner
Quoted 10 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

Deleting a memcg does not reclaim memory from it and the memory can linger till there is a memory pressure. One normal way to proactively reclaim such memory is to set memory.max to 0 just before deleting the memcg. However if some of the memcg's memory is pinned by others, this operation can trigger an oom-kill without any process and thus can log a lot un-needed warnings. So, ignore all such warnings from memory.max.

Can't you set memory.high=0 instead? It does the reclaim portion of memory.max, without the actual OOM killing that causes you problems.

Quoted 9 lines
Quoted 6 lines

Yes that would work but remote charging concerns me. Remote charging can still happen after the memcg is offlined and at the moment, high reclaim does not work for remote memcg and the usage can go till max or global pressure. This is most probably a misconfiguration and we might not receive the warnings in the log ever. Setting memory.max to 0 will definitely give such warnings.

Can we add a warning for the remote charging on dead memcgs?

I don't think we should warn for all remote charging on dead memcgs. One particular example is the buffer_head which can be allocated within reclaim context and most probably pages which they are attached to will be freed soon.

Shakeel

#9 lore raw
In reply to Shakeel Butt
Quoted 5 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

I have been confused by this behavior for several months and I think it will confuse more memcg users.
We should keep the memcg oom behavior consistent with system oom - no oom kill if no process.

What about bellow change ?

mm/memcontrol.c +0 -0
index e28098e13f1c..25fbc37a747f 100644
@@ -6086,6 +6086,9 @@ static ssize_t memory_max_write(struct

kernfs_open_file *of,

                        continue;
                }

+ if (!cgroup_is_populated(memcg->css.cgroup))
+ break;
+

                memcg_memory_event(memcg, MEMCG_OOM);
                if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0))
                        break;
Quoted 93 lines

Deleting a memcg does not reclaim memory from it and the memory can linger till there is a memory pressure. One normal way to proactively reclaim such memory is to set memory.max to 0 just before deleting the memcg. However if some of the memcg's memory is pinned by others, this operation can trigger an oom-kill without any process and thus can log a lot un-needed warnings. So, ignore all such warnings from memory.max.

---
 include/linux/oom.h | 3 +++
 mm/memcontrol.c     | 9 +++++----
 mm/oom_kill.c       | 2 +-
 3 files changed, 9 insertions(+), 5 deletions(-)
include/linux/oom.h +3 -0
index c696c265f019..6345dc55df64 100644
@@ -52,6 +52,9 @@ struct oom_control {
 
        /* Used to print the constraint info. */
        enum oom_constraint constraint;
+
+       /* Do not warn even if there is no process to be killed. */
+       bool no_warn;
 };
 
 extern struct mutex oom_lock;
mm/memcontrol.c +5 -4
index 317dbbaac603..a1f00d9b9bb0 100644
@@ -1571,7 +1571,7 @@ unsigned long mem_cgroup_size(struct mem_cgroup *memcg)
 }
 
 static bool mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
-                                    int order)
+                                    int order, bool no_warn)
 {
        struct oom_control oc = {
                .zonelist = NULL,
@@ -1579,6 +1579,7 @@ static bool mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
                .memcg = memcg,
                .gfp_mask = gfp_mask,
                .order = order,
+               .no_warn = no_warn,
        };
        bool ret;
 
@@ -1821,7 +1822,7 @@ static enum oom_status mem_cgroup_oom(struct mem_cgroup *memcg, gfp_t mask, int
                mem_cgroup_oom_notify(memcg);
 
        mem_cgroup_unmark_under_oom(memcg);
-       if (mem_cgroup_out_of_memory(memcg, mask, order))
+       if (mem_cgroup_out_of_memory(memcg, mask, order, false))
                ret = OOM_SUCCESS;
        else
                ret = OOM_FAILED;
@@ -1880,7 +1881,7 @@ bool mem_cgroup_oom_synchronize(bool handle)
                mem_cgroup_unmark_under_oom(memcg);
                finish_wait(&memcg_oom_waitq, &owait.wait);
                mem_cgroup_out_of_memory(memcg, current->memcg_oom_gfp_mask,
-                                        current->memcg_oom_order);
+                                        current->memcg_oom_order, false);
        } else {
                schedule();
                mem_cgroup_unmark_under_oom(memcg);
@@ -6106,7 +6107,7 @@ static ssize_t memory_max_write(struct kernfs_open_file *of,
                }
 
                memcg_memory_event(memcg, MEMCG_OOM);
-               if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0))
+               if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0, true))
                        break;
        }
 
mm/oom_kill.c +1 -2
index 463b3d74a64a..5ace39f6fe1e 100644
@@ -1098,7 +1098,7 @@ bool out_of_memory(struct oom_control *oc)
 
        select_bad_process(oc);
        /* Found nothing?!?! */
-       if (!oc->chosen) {
+       if (!oc->chosen && !oc->no_warn) {
                dump_header(oc, NULL);
                pr_warn("Out of memory and no killable processes...\n");
                /*
--

2.26.2.526.g744177e7f7-goog

Signature · 2 lines
Thanks
Yafang
#10 lore raw
Quoted 8 lines · Yafang Shao
Quoted 5 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

Quoted 7 lines

I have been confused by this behavior for several months and I think it will confuse more memcg users.
We should keep the memcg oom behavior consistent with system oom - no oom kill if no process.

What about bellow change ?

Seems fine to me. If others are ok with this, please do send a signed-off patch.

Quoted 114 lines
mm/memcontrol.c +3 -0
index e28098e13f1c..25fbc37a747f 100644
@@ -6086,6 +6086,9 @@ static ssize_t memory_max_write(struct
 kernfs_open_file *of,
                        continue;
                }
 
+               if (!cgroup_is_populated(memcg->css.cgroup))
+                       break;
+
                memcg_memory_event(memcg, MEMCG_OOM);
                if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0))
                        break;
Quoted 90 lines

Deleting a memcg does not reclaim memory from it and the memory can linger till there is a memory pressure. One normal way to proactively reclaim such memory is to set memory.max to 0 just before deleting the memcg. However if some of the memcg's memory is pinned by others, this operation can trigger an oom-kill without any process and thus can log a lot un-needed warnings. So, ignore all such warnings from memory.max.

---
 include/linux/oom.h | 3 +++
 mm/memcontrol.c     | 9 +++++----
 mm/oom_kill.c       | 2 +-
 3 files changed, 9 insertions(+), 5 deletions(-)
include/linux/oom.h +3 -0
index c696c265f019..6345dc55df64 100644
@@ -52,6 +52,9 @@ struct oom_control {
 
        /* Used to print the constraint info. */
        enum oom_constraint constraint;
+
+       /* Do not warn even if there is no process to be killed. */
+       bool no_warn;
 };
 
 extern struct mutex oom_lock;
mm/memcontrol.c +5 -4
index 317dbbaac603..a1f00d9b9bb0 100644
@@ -1571,7 +1571,7 @@ unsigned long mem_cgroup_size(struct mem_cgroup *memcg)
 }
 
 static bool mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
-                                    int order)
+                                    int order, bool no_warn)
 {
        struct oom_control oc = {
                .zonelist = NULL,
@@ -1579,6 +1579,7 @@ static bool mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
                .memcg = memcg,
                .gfp_mask = gfp_mask,
                .order = order,
+               .no_warn = no_warn,
        };
        bool ret;
 
@@ -1821,7 +1822,7 @@ static enum oom_status mem_cgroup_oom(struct mem_cgroup *memcg, gfp_t mask, int
                mem_cgroup_oom_notify(memcg);
 
        mem_cgroup_unmark_under_oom(memcg);
-       if (mem_cgroup_out_of_memory(memcg, mask, order))
+       if (mem_cgroup_out_of_memory(memcg, mask, order, false))
                ret = OOM_SUCCESS;
        else
                ret = OOM_FAILED;
@@ -1880,7 +1881,7 @@ bool mem_cgroup_oom_synchronize(bool handle)
                mem_cgroup_unmark_under_oom(memcg);
                finish_wait(&memcg_oom_waitq, &owait.wait);
                mem_cgroup_out_of_memory(memcg, current->memcg_oom_gfp_mask,
-                                        current->memcg_oom_order);
+                                        current->memcg_oom_order, false);
        } else {
                schedule();
                mem_cgroup_unmark_under_oom(memcg);
@@ -6106,7 +6107,7 @@ static ssize_t memory_max_write(struct kernfs_open_file *of,
                }
 
                memcg_memory_event(memcg, MEMCG_OOM);
-               if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0))
+               if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0, true))
                        break;
        }
 
mm/oom_kill.c +1 -2
index 463b3d74a64a..5ace39f6fe1e 100644
@@ -1098,7 +1098,7 @@ bool out_of_memory(struct oom_control *oc)
 
        select_bad_process(oc);
        /* Found nothing?!?! */
-       if (!oc->chosen) {
+       if (!oc->chosen && !oc->no_warn) {
                dump_header(oc, NULL);
                pr_warn("Out of memory and no killable processes...\n");
                /*
--
Quoted 3 lines

2.26.2.526.g744177e7f7-goog

--
Thanks
Yafang

#11 lore raw
Quoted 15 lines · Shakeel Butt
Quoted 13 lines · Yafang Shao
Quoted 5 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

I have been confused by this behavior for several months and I think it will confuse more memcg users.
We should keep the memcg oom behavior consistent with system oom - no oom kill if no process.

Quoted 5 lines
Quoted 2 lines

What about bellow change ?

Seems fine to me. If others are ok with this, please do send a signed-off patch.

Sure, I will.

Quoted 114 lines
Quoted 114 lines
mm/memcontrol.c +3 -0
index e28098e13f1c..25fbc37a747f 100644
@@ -6086,6 +6086,9 @@ static ssize_t memory_max_write(struct
 kernfs_open_file *of,
                        continue;
                }
 
+               if (!cgroup_is_populated(memcg->css.cgroup))
+                       break;
+
                memcg_memory_event(memcg, MEMCG_OOM);
                if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0))
                        break;
Quoted 90 lines

Deleting a memcg does not reclaim memory from it and the memory can linger till there is a memory pressure. One normal way to proactively reclaim such memory is to set memory.max to 0 just before deleting the memcg. However if some of the memcg's memory is pinned by others, this operation can trigger an oom-kill without any process and thus can log a lot un-needed warnings. So, ignore all such warnings from memory.max.

---
 include/linux/oom.h | 3 +++
 mm/memcontrol.c     | 9 +++++----
 mm/oom_kill.c       | 2 +-
 3 files changed, 9 insertions(+), 5 deletions(-)
include/linux/oom.h +3 -0
index c696c265f019..6345dc55df64 100644
@@ -52,6 +52,9 @@ struct oom_control {
 
        /* Used to print the constraint info. */
        enum oom_constraint constraint;
+
+       /* Do not warn even if there is no process to be killed. */
+       bool no_warn;
 };
 
 extern struct mutex oom_lock;
mm/memcontrol.c +5 -4
index 317dbbaac603..a1f00d9b9bb0 100644
@@ -1571,7 +1571,7 @@ unsigned long mem_cgroup_size(struct mem_cgroup *memcg)
 }
 
 static bool mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
-                                    int order)
+                                    int order, bool no_warn)
 {
        struct oom_control oc = {
                .zonelist = NULL,
@@ -1579,6 +1579,7 @@ static bool mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
                .memcg = memcg,
                .gfp_mask = gfp_mask,
                .order = order,
+               .no_warn = no_warn,
        };
        bool ret;
 
@@ -1821,7 +1822,7 @@ static enum oom_status mem_cgroup_oom(struct mem_cgroup *memcg, gfp_t mask, int
                mem_cgroup_oom_notify(memcg);
 
        mem_cgroup_unmark_under_oom(memcg);
-       if (mem_cgroup_out_of_memory(memcg, mask, order))
+       if (mem_cgroup_out_of_memory(memcg, mask, order, false))
                ret = OOM_SUCCESS;
        else
                ret = OOM_FAILED;
@@ -1880,7 +1881,7 @@ bool mem_cgroup_oom_synchronize(bool handle)
                mem_cgroup_unmark_under_oom(memcg);
                finish_wait(&memcg_oom_waitq, &owait.wait);
                mem_cgroup_out_of_memory(memcg, current->memcg_oom_gfp_mask,
-                                        current->memcg_oom_order);
+                                        current->memcg_oom_order, false);
        } else {
                schedule();
                mem_cgroup_unmark_under_oom(memcg);
@@ -6106,7 +6107,7 @@ static ssize_t memory_max_write(struct kernfs_open_file *of,
                }
 
                memcg_memory_event(memcg, MEMCG_OOM);
-               if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0))
+               if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0, true))
                        break;
        }
 
mm/oom_kill.c +1 -2
index 463b3d74a64a..5ace39f6fe1e 100644
@@ -1098,7 +1098,7 @@ bool out_of_memory(struct oom_control *oc)
 
        select_bad_process(oc);
        /* Found nothing?!?! */
-       if (!oc->chosen) {
+       if (!oc->chosen && !oc->no_warn) {
                dump_header(oc, NULL);
                pr_warn("Out of memory and no killable processes...\n");
                /*
--
Quoted 3 lines

2.26.2.526.g744177e7f7-goog

--
Thanks
Yafang

Signature · 2 lines
Thanks
Yafang
maintainer
#12 lore raw
In reply to Yafang Shao
Quoted 9 lines · Yafang Shao
Quoted 5 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

I have been confused by this behavior for several months and I think it will confuse more memcg users.

Could you be more specific what has caused the confusion?

Quoted 2 lines

We should keep the memcg oom behavior consistent with system oom - no oom kill if no process.

This is not the global mmemcg behavior. We do complain loud on no eligible tasks and actually panic the system. Memcg cannot simply do the same by default for obvious reasons.

Quoted 16 lines

What about bellow change ?

mm/memcontrol.c +3 -0
index e28098e13f1c..25fbc37a747f 100644
@@ -6086,6 +6086,9 @@ static ssize_t memory_max_write(struct
 kernfs_open_file *of,
                        continue;
                }
 
+               if (!cgroup_is_populated(memcg->css.cgroup))
+                       break;
+
                memcg_memory_event(memcg, MEMCG_OOM);
                if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0))
Quoted 1 line
                        break;

I am not a great fan to be honest. The warning might be useful for other usecases when it is not clear that the memcg is empty.

Signature · 2 lines
Michal Hocko
SUSE Labs
#13 lore raw
Quoted 9 lines · Michal Hocko
Quoted 7 lines · Yafang Shao
Quoted 5 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

Quoted 5 lines
Quoted 2 lines

I have been confused by this behavior for several months and I think it will confuse more memcg users.

Could you be more specific what has caused the confusion?

No task is different from no eligible task.
No eligible task means there are some candidates but no one is eligible. Whille no task means there is no candidate.

Quoted 7 lines
Quoted 2 lines

We should keep the memcg oom behavior consistent with system oom - no oom kill if no process.

This is not the global mmemcg behavior. We do complain loud on no eligible tasks and actually panic the system. Memcg cannot simply do the same by default for obvious reasons.

As explianed above, no eligible task is different from no task. If there are some candidates but no one is eligible, the system will panic. While if there's no task, it is definitely no OOM, because that's an improssible thing for the system.

Quoted 11 lines
Quoted 11 lines

What about bellow change ?

mm/memcontrol.c +0 -0
index e28098e13f1c..25fbc37a747f 100644
@@ -6086,6 +6086,9 @@ static ssize_t memory_max_write(struct
 kernfs_open_file *of,
                        continue;
                }
 
Quoted 10 lines
Quoted 6 lines
mm/memcontrol.c +3 -0
+               if (!cgroup_is_populated(memcg->css.cgroup))
+                       break;
+
                memcg_memory_event(memcg, MEMCG_OOM);
                if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0))
                        break;

I am not a great fan to be honest. The warning might be useful for other usecases when it is not clear that the memcg is empty.

The other usecase can still get the oom status fomr the MEMCG_OOM event, see bellow,

                 memcg_memory_event(memcg, MEMCG_OOM);

+ if (!cgroup_is_populated(memcg->css.cgroup))
+ break;

See also https://lore.kernel.org/linux-mm/20200504042621.10334-3-laoar.shao-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org/T/#u

Signature · 2 lines
Thanks
Yafang
maintainer
#14 lore raw
Quoted 13 lines · Yafang Shao
Quoted 12 lines · Michal Hocko
Quoted 9 lines · Yafang Shao
Quoted 5 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

I have been confused by this behavior for several months and I think it will confuse more memcg users.

Quoted 6 lines
Quoted 2 lines

Could you be more specific what has caused the confusion?

No task is different from no eligible task.
No eligible task means there are some candidates but no one is eligible. Whille no task means there is no candidate.

I really fail to see a difference. It is clear the one is subset of the other but in practical life tasks might come and go at any time and if you try to reduce the hard limit and there are no tasks that could be reclaimed then I believe we should complain whether it is only oom disabled tasks or no tasks at all. It is certainly unexpected situation in some cases because there are resources which are bound to the memcg without any task we can act on.

Quoted 8 lines
Quoted 7 lines
Quoted 2 lines

We should keep the memcg oom behavior consistent with system oom - no oom kill if no process.

This is not the global mmemcg behavior. We do complain loud on no eligible tasks and actually panic the system. Memcg cannot simply do the same by default for obvious reasons.

Quoted 4 lines

As explianed above, no eligible task is different from no task. If there are some candidates but no one is eligible, the system will panic. While if there's no task, it is definitely no OOM, because that's an improssible thing for the system.

This is very much possible situation when all eligible tasks have been already killed but they didn't really help to resolve the oom situation
- e.g. in kernel memory leak or unbounded shmem consumption etc...

Signature · 2 lines
Michal Hocko
SUSE Labs
#15 lore raw
Quoted 38 lines · Michal Hocko
Quoted 13 lines · Yafang Shao
Quoted 12 lines · Michal Hocko
Quoted 9 lines · Yafang Shao
Quoted 5 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

I have been confused by this behavior for several months and I think it will confuse more memcg users.

Quoted 6 lines
Quoted 2 lines

Could you be more specific what has caused the confusion?

No task is different from no eligible task.
No eligible task means there are some candidates but no one is eligible. Whille no task means there is no candidate.

I really fail to see a difference. It is clear the one is subset of the other but in practical life tasks might come and go at any time and if you try to reduce the hard limit and there are no tasks that could be reclaimed then I believe we should complain whether it is only oom disabled tasks or no tasks at all. It is certainly unexpected situation in some cases because there are resources which are bound to the memcg without any task we can act on.

Quoted 8 lines
Quoted 7 lines
Quoted 2 lines

We should keep the memcg oom behavior consistent with system oom - no oom kill if no process.

This is not the global mmemcg behavior. We do complain loud on no eligible tasks and actually panic the system. Memcg cannot simply do the same by default for obvious reasons.

Quoted 9 lines
Quoted 4 lines

As explianed above, no eligible task is different from no task. If there are some candidates but no one is eligible, the system will panic. While if there's no task, it is definitely no OOM, because that's an improssible thing for the system.

This is very much possible situation when all eligible tasks have been already killed but they didn't really help to resolve the oom situation
- e.g. in kernel memory leak or unbounded shmem consumption etc...

That's still an impossible thing, because many tasks are invisible to the oom killer.
See oom_unkillable_task().

Signature · 2 lines
Thanks
Yafang
maintainer
#16 lore raw
Quoted 3 lines · Yafang Shao
Quoted 2 lines · Michal Hocko

On Mon 04-05-20 15:26:52, Yafang Shao wrote:

[...]

Quoted 5 lines
Quoted 5 lines
Quoted 4 lines

As explianed above, no eligible task is different from no task. If there are some candidates but no one is eligible, the system will panic. While if there's no task, it is definitely no OOM, because that's an improssible thing for the system.

Quoted 8 lines
Quoted 4 lines

This is very much possible situation when all eligible tasks have been already killed but they didn't really help to resolve the oom situation
- e.g. in kernel memory leak or unbounded shmem consumption etc...

That's still an impossible thing, because many tasks are invisible to the oom killer.
See oom_unkillable_task().

I do not follow, really. oom_unkillable_task only says that global init cannot be killed and that it doesn't make any sense to kill kernel threads as they do not own any mm normally.

Signature · 2 lines
Michal Hocko
SUSE Labs
maintainer
#17 lore raw
In reply to Shakeel Butt
Quoted 3 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

It shouldn't dump much more than the regular OOM report AFAICS. Sure there is "Out of memory and no killable processes..." message printed as well but is that a real problem?

Quoted 6 lines

Deleting a memcg does not reclaim memory from it and the memory can linger till there is a memory pressure. One normal way to proactively reclaim such memory is to set memory.max to 0 just before deleting the memcg. However if some of the memcg's memory is pinned by others, this operation can trigger an oom-kill without any process and thus can log a lot un-needed warnings. So, ignore all such warnings from memory.max.

OK, I can see why you might want to use memory.max for that purpose but I do not really understand why the oom report is a problem here. memory.max can trigger the oom kill and user should be expecting the oom report under that condition. Why is "no eligible task" so special? Is it because you know that there won't be any tasks for your particular case? What about other use cases where memory.max is not used as a "sweep before tear down"?

Quoted 84 lines
---
 include/linux/oom.h | 3 +++
 mm/memcontrol.c     | 9 +++++----
 mm/oom_kill.c       | 2 +-
 3 files changed, 9 insertions(+), 5 deletions(-)
include/linux/oom.h +3 -0
index c696c265f019..6345dc55df64 100644
@@ -52,6 +52,9 @@ struct oom_control {
 
 	/* Used to print the constraint info. */
 	enum oom_constraint constraint;
+
+	/* Do not warn even if there is no process to be killed. */
+	bool no_warn;
 };
 
 extern struct mutex oom_lock;
mm/memcontrol.c +5 -4
index 317dbbaac603..a1f00d9b9bb0 100644
@@ -1571,7 +1571,7 @@ unsigned long mem_cgroup_size(struct mem_cgroup *memcg)
 }
 
 static bool mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
-				     int order)
+				     int order, bool no_warn)
 {
 	struct oom_control oc = {
 		.zonelist = NULL,
@@ -1579,6 +1579,7 @@ static bool mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
 		.memcg = memcg,
 		.gfp_mask = gfp_mask,
 		.order = order,
+		.no_warn = no_warn,
 	};
 	bool ret;
 
@@ -1821,7 +1822,7 @@ static enum oom_status mem_cgroup_oom(struct mem_cgroup *memcg, gfp_t mask, int
 		mem_cgroup_oom_notify(memcg);
 
 	mem_cgroup_unmark_under_oom(memcg);
-	if (mem_cgroup_out_of_memory(memcg, mask, order))
+	if (mem_cgroup_out_of_memory(memcg, mask, order, false))
 		ret = OOM_SUCCESS;
 	else
 		ret = OOM_FAILED;
@@ -1880,7 +1881,7 @@ bool mem_cgroup_oom_synchronize(bool handle)
 		mem_cgroup_unmark_under_oom(memcg);
 		finish_wait(&memcg_oom_waitq, &owait.wait);
 		mem_cgroup_out_of_memory(memcg, current->memcg_oom_gfp_mask,
-					 current->memcg_oom_order);
+					 current->memcg_oom_order, false);
 	} else {
 		schedule();
 		mem_cgroup_unmark_under_oom(memcg);
@@ -6106,7 +6107,7 @@ static ssize_t memory_max_write(struct kernfs_open_file *of,
 		}
 
 		memcg_memory_event(memcg, MEMCG_OOM);
-		if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0))
+		if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0, true))
 			break;
 	}
 
mm/oom_kill.c +1 -1
index 463b3d74a64a..5ace39f6fe1e 100644
@@ -1098,7 +1098,7 @@ bool out_of_memory(struct oom_control *oc)
 
 	select_bad_process(oc);
 	/* Found nothing?!?! */
-	if (!oc->chosen) {
+	if (!oc->chosen && !oc->no_warn) {
 		dump_header(oc, NULL);
 		pr_warn("Out of memory and no killable processes...\n");
 		/*
Signature · 1 line
2.26.2.526.g744177e7f7-goog
Signature · 2 lines
Michal Hocko
SUSE Labs
#18 lore raw
Quoted 17 lines · Michal Hocko
Quoted 3 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

It shouldn't dump much more than the regular OOM report AFAICS. Sure there is "Out of memory and no killable processes..." message printed as well but is that a real problem?

Quoted 6 lines

Deleting a memcg does not reclaim memory from it and the memory can linger till there is a memory pressure. One normal way to proactively reclaim such memory is to set memory.max to 0 just before deleting the memcg. However if some of the memcg's memory is pinned by others, this operation can trigger an oom-kill without any process and thus can log a lot un-needed warnings. So, ignore all such warnings from memory.max.

Quoted 2 lines

OK, I can see why you might want to use memory.max for that purpose but I do not really understand why the oom report is a problem here.

It may not be a problem for an individual or small scale deployment but when "sweep before tear down" is the part of the workflow for thousands of machines cycling through hundreds of thousands of cgroups then we can potentially flood the logs with not useful dumps and may hide (or overflow) any useful information in the logs.

Quoted 5 lines

memory.max can trigger the oom kill and user should be expecting the oom report under that condition. Why is "no eligible task" so special? Is it because you know that there won't be any tasks for your particular case? What about other use cases where memory.max is not used as a "sweep before tear down"?

What other such use-cases would be? The only use-case I can envision of adjusting limits dynamically of a live cgroup are resource managers. However for cgroup v2, memory.high is the recommended way to limit the usage, so, why would resource managers be changing memory.max instead of memory.high? I am not sure. What do you think? FB is moving away from limits setting, so, not sure if they have thought of these cases.

BTW for such use-cases, shouldn't we be taking the memcg's oom_lock?

Quoted 89 lines
Quoted 84 lines
---
 include/linux/oom.h | 3 +++
 mm/memcontrol.c     | 9 +++++----
 mm/oom_kill.c       | 2 +-
 3 files changed, 9 insertions(+), 5 deletions(-)
include/linux/oom.h +3 -0
index c696c265f019..6345dc55df64 100644
@@ -52,6 +52,9 @@ struct oom_control {
 
      /* Used to print the constraint info. */
      enum oom_constraint constraint;
+
+     /* Do not warn even if there is no process to be killed. */
+     bool no_warn;
 };
 
 extern struct mutex oom_lock;
mm/memcontrol.c +5 -4
index 317dbbaac603..a1f00d9b9bb0 100644
@@ -1571,7 +1571,7 @@ unsigned long mem_cgroup_size(struct mem_cgroup *memcg)
 }
 
 static bool mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
-                                  int order)
+                                  int order, bool no_warn)
 {
      struct oom_control oc = {
              .zonelist = NULL,
@@ -1579,6 +1579,7 @@ static bool mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
              .memcg = memcg,
              .gfp_mask = gfp_mask,
              .order = order,
+             .no_warn = no_warn,
      };
      bool ret;
 
@@ -1821,7 +1822,7 @@ static enum oom_status mem_cgroup_oom(struct mem_cgroup *memcg, gfp_t mask, int
              mem_cgroup_oom_notify(memcg);
 
      mem_cgroup_unmark_under_oom(memcg);
-     if (mem_cgroup_out_of_memory(memcg, mask, order))
+     if (mem_cgroup_out_of_memory(memcg, mask, order, false))
              ret = OOM_SUCCESS;
      else
              ret = OOM_FAILED;
@@ -1880,7 +1881,7 @@ bool mem_cgroup_oom_synchronize(bool handle)
              mem_cgroup_unmark_under_oom(memcg);
              finish_wait(&memcg_oom_waitq, &owait.wait);
              mem_cgroup_out_of_memory(memcg, current->memcg_oom_gfp_mask,
-                                      current->memcg_oom_order);
+                                      current->memcg_oom_order, false);
      } else {
              schedule();
              mem_cgroup_unmark_under_oom(memcg);
@@ -6106,7 +6107,7 @@ static ssize_t memory_max_write(struct kernfs_open_file *of,
              }
 
              memcg_memory_event(memcg, MEMCG_OOM);
-             if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0))
+             if (!mem_cgroup_out_of_memory(memcg, GFP_KERNEL, 0, true))
                      break;
      }
 
mm/oom_kill.c +1 -2
index 463b3d74a64a..5ace39f6fe1e 100644
@@ -1098,7 +1098,7 @@ bool out_of_memory(struct oom_control *oc)
 
      select_bad_process(oc);
      /* Found nothing?!?! */
-     if (!oc->chosen) {
+     if (!oc->chosen && !oc->no_warn) {
              dump_header(oc, NULL);
              pr_warn("Out of memory and no killable processes...\n");
              /*
--
Quoted 1 line

2.26.2.526.g744177e7f7-goog

--
Michal Hocko
SUSE Labs

maintainer
#19 lore raw
Quoted 18 lines · Shakeel Butt
Quoted 17 lines · Michal Hocko
Quoted 3 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

It shouldn't dump much more than the regular OOM report AFAICS. Sure there is "Out of memory and no killable processes..." message printed as well but is that a real problem?

Quoted 6 lines

Deleting a memcg does not reclaim memory from it and the memory can linger till there is a memory pressure. One normal way to proactively reclaim such memory is to set memory.max to 0 just before deleting the memcg. However if some of the memcg's memory is pinned by others, this operation can trigger an oom-kill without any process and thus can log a lot un-needed warnings. So, ignore all such warnings from memory.max.

Quoted 8 lines
Quoted 2 lines

OK, I can see why you might want to use memory.max for that purpose but I do not really understand why the oom report is a problem here.

It may not be a problem for an individual or small scale deployment but when "sweep before tear down" is the part of the workflow for thousands of machines cycling through hundreds of thousands of cgroups then we can potentially flood the logs with not useful dumps and may hide (or overflow) any useful information in the logs.

If you are doing this in a large scale and the oom report is really a problem then you shouldn't be resetting hard limit to 0 in the first place.

Quoted 11 lines
Quoted 5 lines

memory.max can trigger the oom kill and user should be expecting the oom report under that condition. Why is "no eligible task" so special? Is it because you know that there won't be any tasks for your particular case? What about other use cases where memory.max is not used as a "sweep before tear down"?

What other such use-cases would be? The only use-case I can envision of adjusting limits dynamically of a live cgroup are resource managers. However for cgroup v2, memory.high is the recommended way to limit the usage, so, why would resource managers be changing memory.max instead of memory.high? I am not sure. What do you think?

There are different reasons to use the hard limit. Mostly to contain potential runaways. While high limit might be a sufficient measure to achieve that as well the hard limit is the last resort. And it clearly has the oom killer semantic so I am not really sure why you are comparing the two.

Quoted 4 lines

FB is moving away from limits setting, so, not sure if they have thought of these cases.

BTW for such use-cases, shouldn't we be taking the memcg's oom_lock?

This is a good question. I would have to go and double check the code but I suspect that this is an omission.

Signature · 2 lines
Michal Hocko
SUSE Labs
#20 lore raw
Quoted 29 lines · Michal Hocko
Quoted 18 lines · Shakeel Butt
Quoted 17 lines · Michal Hocko
Quoted 3 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

It shouldn't dump much more than the regular OOM report AFAICS. Sure there is "Out of memory and no killable processes..." message printed as well but is that a real problem?

Quoted 6 lines

Deleting a memcg does not reclaim memory from it and the memory can linger till there is a memory pressure. One normal way to proactively reclaim such memory is to set memory.max to 0 just before deleting the memcg. However if some of the memcg's memory is pinned by others, this operation can trigger an oom-kill without any process and thus can log a lot un-needed warnings. So, ignore all such warnings from memory.max.

Quoted 8 lines
Quoted 2 lines

OK, I can see why you might want to use memory.max for that purpose but I do not really understand why the oom report is a problem here.

It may not be a problem for an individual or small scale deployment but when "sweep before tear down" is the part of the workflow for thousands of machines cycling through hundreds of thousands of cgroups then we can potentially flood the logs with not useful dumps and may hide (or overflow) any useful information in the logs.

Quoted 4 lines

If you are doing this in a large scale and the oom report is really a problem then you shouldn't be resetting hard limit to 0 in the first place.

I think I have pretty clearly described why we want to reset the hard limit to 0, so, unless there is an alternative I don't see why we should not be doing this.

Quoted 12 lines
Quoted 11 lines
Quoted 5 lines

memory.max can trigger the oom kill and user should be expecting the oom report under that condition. Why is "no eligible task" so special? Is it because you know that there won't be any tasks for your particular case? What about other use cases where memory.max is not used as a "sweep before tear down"?

What other such use-cases would be? The only use-case I can envision of adjusting limits dynamically of a live cgroup are resource managers. However for cgroup v2, memory.high is the recommended way to limit the usage, so, why would resource managers be changing memory.max instead of memory.high? I am not sure. What do you think?

Quoted 6 lines

There are different reasons to use the hard limit. Mostly to contain potential runaways. While high limit might be a sufficient measure to achieve that as well the hard limit is the last resort. And it clearly has the oom killer semantic so I am not really sure why you are comparing the two.

I am trying to see if "no eligible task" is really an issue and should be warned for the "other use cases". The only real use-case I can think of are resource managers adjusting the limit dynamically. I don't see "no eligible task" a concerning reason for such use-case. If you have some other use-case please do tell.

Shakeel

maintainer
#21 lore raw
Quoted 30 lines · Shakeel Butt
Quoted 29 lines · Michal Hocko
Quoted 26 lines · Shakeel Butt
Quoted 17 lines · Michal Hocko
Quoted 3 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

It shouldn't dump much more than the regular OOM report AFAICS. Sure there is "Out of memory and no killable processes..." message printed as well but is that a real problem?

Quoted 6 lines

Deleting a memcg does not reclaim memory from it and the memory can linger till there is a memory pressure. One normal way to proactively reclaim such memory is to set memory.max to 0 just before deleting the memcg. However if some of the memcg's memory is pinned by others, this operation can trigger an oom-kill without any process and thus can log a lot un-needed warnings. So, ignore all such warnings from memory.max.

Quoted 2 lines

OK, I can see why you might want to use memory.max for that purpose but I do not really understand why the oom report is a problem here.

It may not be a problem for an individual or small scale deployment but when "sweep before tear down" is the part of the workflow for thousands of machines cycling through hundreds of thousands of cgroups then we can potentially flood the logs with not useful dumps and may hide (or overflow) any useful information in the logs.

Quoted 8 lines
Quoted 4 lines

If you are doing this in a large scale and the oom report is really a problem then you shouldn't be resetting hard limit to 0 in the first place.

I think I have pretty clearly described why we want to reset the hard limit to 0, so, unless there is an alternative I don't see why we should not be doing this.

I am not saying you shouldn't be doing that. I am just saying that if you do then you have to live with oom reports.

Quoted 19 lines
Quoted 12 lines
Quoted 11 lines
Quoted 5 lines

memory.max can trigger the oom kill and user should be expecting the oom report under that condition. Why is "no eligible task" so special? Is it because you know that there won't be any tasks for your particular case? What about other use cases where memory.max is not used as a "sweep before tear down"?

What other such use-cases would be? The only use-case I can envision of adjusting limits dynamically of a live cgroup are resource managers. However for cgroup v2, memory.high is the recommended way to limit the usage, so, why would resource managers be changing memory.max instead of memory.high? I am not sure. What do you think?

Quoted 6 lines

There are different reasons to use the hard limit. Mostly to contain potential runaways. While high limit might be a sufficient measure to achieve that as well the hard limit is the last resort. And it clearly has the oom killer semantic so I am not really sure why you are comparing the two.

Quoted 4 lines

I am trying to see if "no eligible task" is really an issue and should be warned for the "other use cases". The only real use-case I can think of are resource managers adjusting the limit dynamically. I don't see "no eligible task" a concerning reason for such use-case.

It is very much a concerning reason to notify about like any other OOM situation due to hard limit breach. In this case it is worse in some sense because the limit cannot be trimmed down because there is no directly reclaimable memory at all. Such an oom situation is effectivelly conserved.

Signature · 2 lines
Michal Hocko
SUSE Labs
#22 lore raw
Quoted 68 lines · Michal Hocko
Quoted 30 lines · Shakeel Butt
Quoted 29 lines · Michal Hocko
Quoted 26 lines · Shakeel Butt
Quoted 17 lines · Michal Hocko
Quoted 3 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

It shouldn't dump much more than the regular OOM report AFAICS. Sure there is "Out of memory and no killable processes..." message printed as well but is that a real problem?

Quoted 6 lines

Deleting a memcg does not reclaim memory from it and the memory can linger till there is a memory pressure. One normal way to proactively reclaim such memory is to set memory.max to 0 just before deleting the memcg. However if some of the memcg's memory is pinned by others, this operation can trigger an oom-kill without any process and thus can log a lot un-needed warnings. So, ignore all such warnings from memory.max.

Quoted 2 lines

OK, I can see why you might want to use memory.max for that purpose but I do not really understand why the oom report is a problem here.

It may not be a problem for an individual or small scale deployment but when "sweep before tear down" is the part of the workflow for thousands of machines cycling through hundreds of thousands of cgroups then we can potentially flood the logs with not useful dumps and may hide (or overflow) any useful information in the logs.

Quoted 8 lines
Quoted 4 lines

If you are doing this in a large scale and the oom report is really a problem then you shouldn't be resetting hard limit to 0 in the first place.

I think I have pretty clearly described why we want to reset the hard limit to 0, so, unless there is an alternative I don't see why we should not be doing this.

I am not saying you shouldn't be doing that. I am just saying that if you do then you have to live with oom reports.

Quoted 19 lines
Quoted 12 lines
Quoted 11 lines
Quoted 5 lines

memory.max can trigger the oom kill and user should be expecting the oom report under that condition. Why is "no eligible task" so special? Is it because you know that there won't be any tasks for your particular case? What about other use cases where memory.max is not used as a "sweep before tear down"?

What other such use-cases would be? The only use-case I can envision of adjusting limits dynamically of a live cgroup are resource managers. However for cgroup v2, memory.high is the recommended way to limit the usage, so, why would resource managers be changing memory.max instead of memory.high? I am not sure. What do you think?

Quoted 6 lines

There are different reasons to use the hard limit. Mostly to contain potential runaways. While high limit might be a sufficient measure to achieve that as well the hard limit is the last resort. And it clearly has the oom killer semantic so I am not really sure why you are comparing the two.

Quoted 4 lines

I am trying to see if "no eligible task" is really an issue and should be warned for the "other use cases". The only real use-case I can think of are resource managers adjusting the limit dynamically. I don't see "no eligible task" a concerning reason for such use-case.

Quoted 6 lines

It is very much a concerning reason to notify about like any other OOM situation due to hard limit breach. In this case it is worse in some sense because the limit cannot be trimmed down because there is no directly reclaimable memory at all. Such an oom situation is effectivelly conserved.
--

Let me make a more precise statement and tell me if you agree. The "no eligible task" is concerning for the charging path but not for the writer of memory.max. The writer can read the usage and cgroup.[procs|events] to figure out the situation if needed. Usually such writers (i.e. resource managers) use memory.high in addition to memory.max. First set memory.high and once the usage is below the high then set max to not induce the oom-kills.

Shakeel

#23 lore raw
Quoted 77 lines · Shakeel Butt
Quoted 68 lines · Michal Hocko
Quoted 30 lines · Shakeel Butt
Quoted 29 lines · Michal Hocko
Quoted 26 lines · Shakeel Butt
Quoted 17 lines · Michal Hocko
Quoted 3 lines · Shakeel Butt

Lowering memory.max can trigger an oom-kill if the reclaim does not succeed. However if oom-killer does not find a process for killing, it dumps a lot of warnings.

It shouldn't dump much more than the regular OOM report AFAICS. Sure there is "Out of memory and no killable processes..." message printed as well but is that a real problem?

Quoted 6 lines

Deleting a memcg does not reclaim memory from it and the memory can linger till there is a memory pressure. One normal way to proactively reclaim such memory is to set memory.max to 0 just before deleting the memcg. However if some of the memcg's memory is pinned by others, this operation can trigger an oom-kill without any process and thus can log a lot un-needed warnings. So, ignore all such warnings from memory.max.

Quoted 2 lines

OK, I can see why you might want to use memory.max for that purpose but I do not really understand why the oom report is a problem here.

It may not be a problem for an individual or small scale deployment but when "sweep before tear down" is the part of the workflow for thousands of machines cycling through hundreds of thousands of cgroups then we can potentially flood the logs with not useful dumps and may hide (or overflow) any useful information in the logs.

Quoted 8 lines
Quoted 4 lines

If you are doing this in a large scale and the oom report is really a problem then you shouldn't be resetting hard limit to 0 in the first place.

I think I have pretty clearly described why we want to reset the hard limit to 0, so, unless there is an alternative I don't see why we should not be doing this.

I am not saying you shouldn't be doing that. I am just saying that if you do then you have to live with oom reports.

Quoted 19 lines
Quoted 12 lines
Quoted 11 lines
Quoted 5 lines

memory.max can trigger the oom kill and user should be expecting the oom report under that condition. Why is "no eligible task" so special? Is it because you know that there won't be any tasks for your particular case? What about other use cases where memory.max is not used as a "sweep before tear down"?

What other such use-cases would be? The only use-case I can envision of adjusting limits dynamically of a live cgroup are resource managers. However for cgroup v2, memory.high is the recommended way to limit the usage, so, why would resource managers be changing memory.max instead of memory.high? I am not sure. What do you think?

Quoted 6 lines

There are different reasons to use the hard limit. Mostly to contain potential runaways. While high limit might be a sufficient measure to achieve that as well the hard limit is the last resort. And it clearly has the oom killer semantic so I am not really sure why you are comparing the two.

Quoted 4 lines

I am trying to see if "no eligible task" is really an issue and should be warned for the "other use cases". The only real use-case I can think of are resource managers adjusting the limit dynamically. I don't see "no eligible task" a concerning reason for such use-case.

Quoted 6 lines

It is very much a concerning reason to notify about like any other OOM situation due to hard limit breach. In this case it is worse in some sense because the limit cannot be trimmed down because there is no directly reclaimable memory at all. Such an oom situation is effectivelly conserved.
--

Quoted 4 lines

Let me make a more precise statement and tell me if you agree. The "no eligible task" is concerning for the charging path but not for the writer of memory.max. The writer can read the usage and cgroup.[procs|events] to figure out the situation if needed.

Agreed.
cgroup.[procs|events] can give all the admin want in this situation. The oom report is a redundant infomation, really.

Quoted 5 lines

Usually
such writers (i.e. resource managers) use memory.high in addition to memory.max. First set memory.high and once the usage is below the high then set max to not induce the oom-kills.

Signature · 2 lines
Thanks
Yafang
maintainer
#24 lore raw
In reply to Shakeel Butt
Quoted 3 lines · Shakeel Butt
Quoted 2 lines · Michal Hocko

On Mon 04-05-20 07:53:01, Shakeel Butt wrote:

[...]

Quoted 12 lines
Quoted 11 lines
Quoted 4 lines

I am trying to see if "no eligible task" is really an issue and should be warned for the "other use cases". The only real use-case I can think of are resource managers adjusting the limit dynamically. I don't see "no eligible task" a concerning reason for such use-case.

It is very much a concerning reason to notify about like any other OOM situation due to hard limit breach. In this case it is worse in some sense because the limit cannot be trimmed down because there is no directly reclaimable memory at all. Such an oom situation is effectivelly conserved.
--

Quoted 4 lines

Let me make a more precise statement and tell me if you agree. The "no eligible task" is concerning for the charging path but not for the writer of memory.max. The writer can read the usage and cgroup.[procs|events] to figure out the situation if needed.

I really hate to repeat myself but this is no different from a regular oom situation. Admin sets the hard limit and the kernel tries to act upon that.

You cannot make any assumption about what admin wanted or didn't want to see. We simply trigger the oom killer on memory.max and this is a documented behavior. No eligible task or no task at all is a simply a corner case when the kernel cannot act and mentions that along with the oom report so that whoever consumes that information can debug or act on that fact.

Silencing the oom report is simply removing a potentially useful aid to debug further a potential problem. But let me repeat this is not reallly any different from a regular oom situation when the oom killer is able to act.

Signature · 2 lines
Michal Hocko
SUSE Labs
#25 lore raw
Quoted 18 lines · Michal Hocko
Quoted 3 lines · Shakeel Butt
Quoted 2 lines · Michal Hocko

On Mon 04-05-20 07:53:01, Shakeel Butt wrote:

[...]

Quoted 12 lines
Quoted 11 lines
Quoted 4 lines

I am trying to see if "no eligible task" is really an issue and should be warned for the "other use cases". The only real use-case I can think of are resource managers adjusting the limit dynamically. I don't see "no eligible task" a concerning reason for such use-case.

It is very much a concerning reason to notify about like any other OOM situation due to hard limit breach. In this case it is worse in some sense because the limit cannot be trimmed down because there is no directly reclaimable memory at all. Such an oom situation is effectivelly conserved.
--

Quoted 7 lines
Quoted 4 lines

Let me make a more precise statement and tell me if you agree. The "no eligible task" is concerning for the charging path but not for the writer of memory.max. The writer can read the usage and cgroup.[procs|events] to figure out the situation if needed.

I really hate to repeat myself but this is no different from a regular oom situation.

Conceptually yes there is no difference but there is no *divine restriction* to not make a difference if there is a real world use-case which would benefit from it.

Quoted 5 lines

Admin sets the hard limit and the kernel tries to act upon that.

You cannot make any assumption about what admin wanted or didn't want to see.

Actually we always make assumptions on how the feature we implement will be used and as new use-cases come the assumptions evolve.

Quoted 3 lines

We simply trigger the oom killer on memory.max and this is a documented behavior. No eligible task or no task at all is a simply a corner case

For "sweep before tear down" use-case this is not a corner case.

Quoted 6 lines

when the kernel cannot act and mentions that along with the oom report so that whoever consumes that information can debug or act on that fact.

Silencing the oom report is simply removing a potentially useful aid to debug further a potential problem.

*Potentially* useful for debugging versus actually beneficial for "sweep before tear down" use-case. Also I am not saying to make "no dumps for memory.max when no eligible tasks" a set in stone rule. We can always reevaluate when such information will actually be useful.

Johannes/Andrew, what's your opinion?

maintainer
#26 lore raw

On Mon 04-05-20 12:23:51, Shakeel Butt wrote:
[...]

Quoted 2 lines

*Potentially* useful for debugging versus actually beneficial for "sweep before tear down" use-case.

I definitely do not want to prevent you from achieving what you want/need. Let's get back to your argument on why you cannot use memory.high for this purpose and what is the actual difference from memory.max on the "sweep before removal". You've said

: Yes that would work but remote charging concerns me. Remote charging : can still happen after the memcg is offlined and at the moment, high : reclaim does not work for remote memcg and the usage can go till max : or global pressure. This is most probably a misconfiguration and we : might not receive the warnings in the log ever. Setting memory.max to : 0 will definitely give such warnings.

So essentially the only reason you are not using memory.high which would effectively achieve the same level of reclaim for your usecase is that potential future remote charges could get unnoticed. I have proposed to warn when charging to an offline memcg because that looks like a sign of bug to me. Having the hard limit clamped to 0 (or some other small value) would complain loud by the oom report and no eligible tasks message but it will unlikely help to stop such a usage because, well, there is nothing reclaimable and we force the charge in that case. So you are effectively in the memory.high like situation.

So instead of potentially removing a useful information can we focus on the remote charging side of the problem and deal with it in a sensible way? That would make memory.high usable for your usecase and I still believe that this is what you should be using in the first place.

Signature · 2 lines
Michal Hocko
SUSE Labs
#27 lore raw
Quoted 18 lines · Michal Hocko

On Mon 04-05-20 12:23:51, Shakeel Butt wrote:
[...]

Quoted 2 lines

*Potentially* useful for debugging versus actually beneficial for "sweep before tear down" use-case.

I definitely do not want to prevent you from achieving what you want/need. Let's get back to your argument on why you cannot use memory.high for this purpose and what is the actual difference from memory.max on the "sweep before removal". You've said

: Yes that would work but remote charging concerns me. Remote charging : can still happen after the memcg is offlined and at the moment, high : reclaim does not work for remote memcg and the usage can go till max : or global pressure. This is most probably a misconfiguration and we : might not receive the warnings in the log ever. Setting memory.max to : 0 will definitely give such warnings.

Quoted 3 lines

So essentially the only reason you are not using memory.high which would effectively achieve the same level of reclaim for your usecase is that potential future remote charges could get unnoticed.

Yes.

Quoted 3 lines

I have proposed to
warn when charging to an offline memcg because that looks like a sign of bug to me.

Instead of a bug, I would say misconfiguration but there is at least a genuine user i.e. buffer_head. It can be allocated in reclaim and trigger remote charging but it should be fine as the page it is attached to will possibly get freed soon. So, I don't think we want to warn for all remote charges to an offlined memcg.

Quoted 5 lines

Having the hard limit clamped to 0 (or some other small value) would complain loud by the oom report and no eligible tasks message but it will unlikely help to stop such a usage because, well, there is nothing reclaimable and we force the charge in that case. So you are effectively in the memory.high like situation.

Yes, effectively it will be similar to memory.high but at least we will get early warnings.

Now rethinking about the remote charging of buffer_head to an offlined memcg with memory.max=0. It seems like it is special in the sense that it is using __GFP_NOFAIL and will skip the oom-killer and thus warnings. Maybe the right approach is, as you suggested, always warn for charging an offline memcg unless (__GFP_NOFAIL|__GFP_RETRY_MAYFAIL). Though I am not sure if this is doable without code duplication.

Quoted 5 lines

So instead of potentially removing a useful information can we focus on the remote charging side of the problem and deal with it in a sensible way? That would make memory.high usable for your usecase and I still believe that this is what you should be using in the first place.

We talked about this at LSFMM'19 and I think the decision was to not fix high reclaim for remote memcg until it will be an actual issue. I suppose now we can treat it as an actual issue.

There are a couple of open questions:
1) Should the remote chargers be throttled and do the high reclaim?
2) There can be multiple remote charges to multiple memcgs in a single kernel entry. Should we handle such scenarios?

Shakeel

maintainer
#28 lore raw
Quoted 6 lines · Shakeel Butt
Quoted 4 lines · Michal Hocko

So instead of potentially removing a useful information can we focus on the remote charging side of the problem and deal with it in a sensible way? That would make memory.high usable for your usecase and I still believe that this is what you should be using in the first place.

Quoted 6 lines

We talked about this at LSFMM'19 and I think the decision was to not fix high reclaim for remote memcg until it will be an actual issue. I suppose now we can treat it as an actual issue.

There are a couple of open questions:
1) Should the remote chargers be throttled and do the high reclaim?

I would say it depends on the caller. We may need both: a centralized charger like a kthread that does work on behalf of many cgroups should not be throttled, or we risk priority inversions - maybe not even held up for reclaim, although that would need some thinking about memory.max as well - whether remote charges should be allowed to overrun memory.max temporarily, and we punt all reclaim from such contexts to a worker. (Preferrably, in the future, with all the cpu cycles of that worker accounted to the cgroup. We want that for kswapd-style background reclaim as well).

We do similar things with IO for example, when offloading IO to a central kthread. The kthread is allowed to proceed past a cgroup's allowance in order to make forward progress, and the cgroup will be forced to pay up retroactively when it comes back for more of the resource.

maintainer
#29 lore raw
In reply to Shakeel Butt
Quoted 7 lines · Shakeel Butt
Quoted 2 lines · Michal Hocko

I really hate to repeat myself but this is no different from a regular oom situation.

Conceptually yes there is no difference but there is no *divine restriction* to not make a difference if there is a real world use-case which would benefit from it.

I would wholeheartedly agree with this in general.

However, we're talking about the very semantics that set memory.max apart from memory.high: triggering OOM kills to enforce the limit.

Quoted 7 lines
Quoted 6 lines

when the kernel cannot act and mentions that along with the oom report so that whoever consumes that information can debug or act on that fact.

Silencing the oom report is simply removing a potentially useful aid to debug further a potential problem.

Quoted 6 lines

*Potentially* useful for debugging versus actually beneficial for "sweep before tear down" use-case. Also I am not saying to make "no dumps for memory.max when no eligible tasks" a set in stone rule. We can always reevaluate when such information will actually be useful.

Johannes/Andrew, what's your opinion?

I still think that if you want to sweep without triggering OOMs, memory.high has the matching semantics.

As you pointed out, it doesn't work well for foreign charges, but that is more of a limitation in the implementation than in the semantics:

/*
* If the hierarchy is above the normal consumption range, schedule
* reclaim on returning to userland. We can perform reclaim here
* if __GFP_RECLAIM but let's always punt for simplicity and so that
* GFP_KERNEL can consistently be used during reclaim. @memcg is
* not recorded as it most likely matches current's and won't
* change in the meantime. As high limit is checked again before
* reclaim, the cost of mismatch is negligible.
*/

Wouldn't it be more useful to fix that instead? It shouldn't be much of a code change to do sync reclaim in try_charge().

Then you could express all things that you asked for without changing any user-visible semantics: sweep an empty cgroup as well as possible, do not oom on remaining charges that continue to be used by processes outside the cgroup, do trigger oom on new foreign charges appearing due to a misconfiguration.

echo 0 > memory.high
cat memory.current > memory.max

Would this work for you?

#30 lore raw
Quoted 45 lines · Johannes Weiner
Quoted 7 lines · Shakeel Butt
Quoted 2 lines · Michal Hocko

I really hate to repeat myself but this is no different from a regular oom situation.

Conceptually yes there is no difference but there is no *divine restriction* to not make a difference if there is a real world use-case which would benefit from it.

I would wholeheartedly agree with this in general.

However, we're talking about the very semantics that set memory.max apart from memory.high: triggering OOM kills to enforce the limit.

Quoted 7 lines
Quoted 6 lines

when the kernel cannot act and mentions that along with the oom report so that whoever consumes that information can debug or act on that fact.

Silencing the oom report is simply removing a potentially useful aid to debug further a potential problem.

Quoted 6 lines

*Potentially* useful for debugging versus actually beneficial for "sweep before tear down" use-case. Also I am not saying to make "no dumps for memory.max when no eligible tasks" a set in stone rule. We can always reevaluate when such information will actually be useful.

Johannes/Andrew, what's your opinion?

I still think that if you want to sweep without triggering OOMs, memory.high has the matching semantics.

As you pointed out, it doesn't work well for foreign charges, but that is more of a limitation in the implementation than in the semantics:

/*
* If the hierarchy is above the normal consumption range, schedule
* reclaim on returning to userland. We can perform reclaim here
* if __GFP_RECLAIM but let's always punt for simplicity and so that
* GFP_KERNEL can consistently be used during reclaim. @memcg is
* not recorded as it most likely matches current's and won't
* change in the meantime. As high limit is checked again before
* reclaim, the cost of mismatch is negligible.
*/

Quoted 2 lines

Wouldn't it be more useful to fix that instead? It shouldn't be much of a code change to do sync reclaim in try_charge().

Sync reclaim would really simplify the remote charging case. Though should sync reclaim only be done for remote charging or for all?

Quoted 11 lines

Then you could express all things that you asked for without changing any user-visible semantics: sweep an empty cgroup as well as possible, do not oom on remaining charges that continue to be used by processes outside the cgroup, do trigger oom on new foreign charges appearing due to a misconfiguration.

echo 0 > memory.high
cat memory.current > memory.max

Would this work for you?

Yes that would work. I will work on a patch.

maintainer
#31 lore raw
Quoted 46 lines · Shakeel Butt
Quoted 45 lines · Johannes Weiner
Quoted 7 lines · Shakeel Butt
Quoted 2 lines · Michal Hocko

I really hate to repeat myself but this is no different from a regular oom situation.

Conceptually yes there is no difference but there is no *divine restriction* to not make a difference if there is a real world use-case which would benefit from it.

I would wholeheartedly agree with this in general.

However, we're talking about the very semantics that set memory.max apart from memory.high: triggering OOM kills to enforce the limit.

Quoted 7 lines
Quoted 6 lines

when the kernel cannot act and mentions that along with the oom report so that whoever consumes that information can debug or act on that fact.

Silencing the oom report is simply removing a potentially useful aid to debug further a potential problem.

Quoted 6 lines

*Potentially* useful for debugging versus actually beneficial for "sweep before tear down" use-case. Also I am not saying to make "no dumps for memory.max when no eligible tasks" a set in stone rule. We can always reevaluate when such information will actually be useful.

Johannes/Andrew, what's your opinion?

I still think that if you want to sweep without triggering OOMs, memory.high has the matching semantics.

As you pointed out, it doesn't work well for foreign charges, but that is more of a limitation in the implementation than in the semantics:

/*
* If the hierarchy is above the normal consumption range, schedule
* reclaim on returning to userland. We can perform reclaim here
* if __GFP_RECLAIM but let's always punt for simplicity and so that
* GFP_KERNEL can consistently be used during reclaim. @memcg is
* not recorded as it most likely matches current's and won't
* change in the meantime. As high limit is checked again before
* reclaim, the cost of mismatch is negligible.
*/

Quoted 5 lines
Quoted 2 lines

Wouldn't it be more useful to fix that instead? It shouldn't be much of a code change to do sync reclaim in try_charge().

Sync reclaim would really simplify the remote charging case. Though should sync reclaim only be done for remote charging or for all?

The simplest way around that would be to always do sync reclaim for unpopulated memcgs because those do not have any user context to reclaim from and for restricted allocation contexts like atomic allocations maybe also for GFP_NO{IO,FS}.

Signature · 2 lines
Michal Hocko
SUSE Labs
maintainer
#32 lore raw
In reply to Shakeel Butt
Quoted 46 lines · Shakeel Butt
Quoted 45 lines · Johannes Weiner
Quoted 7 lines · Shakeel Butt
Quoted 2 lines · Michal Hocko

I really hate to repeat myself but this is no different from a regular oom situation.

Conceptually yes there is no difference but there is no *divine restriction* to not make a difference if there is a real world use-case which would benefit from it.

I would wholeheartedly agree with this in general.

However, we're talking about the very semantics that set memory.max apart from memory.high: triggering OOM kills to enforce the limit.

Quoted 7 lines
Quoted 6 lines

when the kernel cannot act and mentions that along with the oom report so that whoever consumes that information can debug or act on that fact.

Silencing the oom report is simply removing a potentially useful aid to debug further a potential problem.

Quoted 6 lines

*Potentially* useful for debugging versus actually beneficial for "sweep before tear down" use-case. Also I am not saying to make "no dumps for memory.max when no eligible tasks" a set in stone rule. We can always reevaluate when such information will actually be useful.

Johannes/Andrew, what's your opinion?

I still think that if you want to sweep without triggering OOMs, memory.high has the matching semantics.

As you pointed out, it doesn't work well for foreign charges, but that is more of a limitation in the implementation than in the semantics:

/*
* If the hierarchy is above the normal consumption range, schedule
* reclaim on returning to userland. We can perform reclaim here
* if __GFP_RECLAIM but let's always punt for simplicity and so that
* GFP_KERNEL can consistently be used during reclaim. @memcg is
* not recorded as it most likely matches current's and won't
* change in the meantime. As high limit is checked again before
* reclaim, the cost of mismatch is negligible.
*/

Quoted 5 lines
Quoted 2 lines

Wouldn't it be more useful to fix that instead? It shouldn't be much of a code change to do sync reclaim in try_charge().

Sync reclaim would really simplify the remote charging case. Though should sync reclaim only be done for remote charging or for all?

I would do it for all __GFP_RECLAIM callers, no need to special case remote charging unnecessarily IMO.

We can do both the reclaim as well as the penalty throttling synchronously, i.e. all of mem_cgroup_handle_over_high(). And then punt to the userspace resume when we either didn't reclaim or are still over the threshold after reclaim.

Btw we should probably kick off high_work rather than set userspace resume on foreign charges, right? Otherwise we may not reclaim at all when we push a group over its limit from outside (and in a !__GFP_RECLAIM context).

#33 lore raw
In reply to Shakeel Butt
Quoted 5 lines · Shakeel Butt

It may not be a problem for an individual or small scale deployment but when "sweep before tear down" is the part of the workflow for thousands of machines cycling through hundreds of thousands of cgroups then we can potentially flood the logs with not useful dumps and may hide (or overflow) any useful information in the logs.

I'm proposing a patch which allows configuring which OOM-related messages
should be sent to consoles at
https://lkml.kernel.org/r/20200424024239.63607-1-penguin-kernel-JPay3/[email protected] . Will that approach help you?

#34 lore raw
Quoted 8 lines · Tetsuo Handa
Quoted 5 lines · Shakeel Butt

It may not be a problem for an individual or small scale deployment but when "sweep before tear down" is the part of the workflow for thousands of machines cycling through hundreds of thousands of cgroups then we can potentially flood the logs with not useful dumps and may hide (or overflow) any useful information in the logs.

Quoted 4 lines

I'm proposing a patch which allows configuring which OOM-related messages should be sent to consoles at
https://lkml.kernel.org/r/[email protected] . Will that approach help you?

From what I understand, that patch is specifically for controlling messages to consoles. The messages will still be in logs, right?

#35 lore raw
Quoted 10 lines · Shakeel Butt
Quoted 8 lines · Tetsuo Handa
Quoted 5 lines · Shakeel Butt

It may not be a problem for an individual or small scale deployment but when "sweep before tear down" is the part of the workflow for thousands of machines cycling through hundreds of thousands of cgroups then we can potentially flood the logs with not useful dumps and may hide (or overflow) any useful information in the logs.

Quoted 8 lines
Quoted 6 lines

I'm proposing a patch which allows configuring which OOM-related messages
should be sent to consoles at
https://lkml.kernel.org/r/20200424024239.63607-1-penguin-kernel-JPay3/[email protected] . Will that approach help you?

From what I understand, that patch is specifically for controlling

messages to consoles. The messages will still be in logs, right?

Right.

If you want to control which OOM-related messages should be sent to syslog, we could use similar approach.